summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb-new/musb_core.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb-new/musb_core.h')
-rw-r--r--drivers/usb/musb-new/musb_core.h623
1 files changed, 623 insertions, 0 deletions
diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h
new file mode 100644
index 0000000000..2695742098
--- /dev/null
+++ b/drivers/usb/musb-new/musb_core.h
@@ -0,0 +1,623 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#else
+#include <asm/errno.h>
+#endif
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x) (x & 0x3ff)
+#define MUSB_HWVERS_RC 0x8000
+#define MUSB_HWVERS_1300 0x52C
+#define MUSB_HWVERS_1400 0x590
+#define MUSB_HWVERS_1800 0x720
+#define MUSB_HWVERS_1900 0x784
+#define MUSB_HWVERS_2000 0x800
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#ifndef __UBOOT__
+#include <linux/usb/hcd.h>
+#endif
+#include "musb_host.h"
+
+#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST)
+#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL)
+#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG)
+
+/* NOTE: otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m) (!(m)->is_host)
+#define is_host_active(m) ((m)->is_host)
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifndef __UBOOT__
+#define is_peripheral_capable() (1)
+#else
+#ifdef CONFIG_MUSB_GADGET
+#define is_peripheral_capable() (1)
+#else
+#define is_peripheral_capable() (0)
+#endif
+#endif
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+/****************************** HOST ROLE ***********************************/
+
+#ifndef __UBOOT__
+#define is_host_capable() (1)
+#else
+#ifdef CONFIG_MUSB_HOST
+#define is_host_capable() (1)
+#else
+#define is_host_capable() (0)
+#endif
+#endif
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+ MUSB_EP0_IDLE,
+ MUSB_EP0_START, /* expect ack of setup */
+ MUSB_EP0_IN, /* expect IN DATA */
+ MUSB_EP0_OUT, /* expect ack of OUT DATA */
+ MUSB_EP0_STATUS, /* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+ MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
+ MUSB_EP0_STAGE_SETUP, /* received SETUP */
+ MUSB_EP0_STAGE_TX, /* IN data */
+ MUSB_EP0_STAGE_RX, /* OUT data */
+ MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
+ MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */
+ MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/*
+ * OTG protocol constants. See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
+#define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
+#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
+
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
+ || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
+ || defined(CONFIG_ARCH_OMAP4)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#define musb_ep_select(_mbase, _epnum) \
+ musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum)))
+#define MUSB_EP_OFFSET MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+ musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+ { (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+ { (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+ (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init: turns on clocks, sets up platform-specific registers, etc
+ * @exit: undoes @init
+ * @set_mode: forcefully changes operating mode
+ * @try_ilde: tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus: forces vbus status
+ * @adjust_channel_params: pre check for standard dma channel_program func
+ */
+struct musb_platform_ops {
+ int (*init)(struct musb *musb);
+ int (*exit)(struct musb *musb);
+
+ void (*enable)(struct musb *musb);
+ void (*disable)(struct musb *musb);
+
+ int (*set_mode)(struct musb *musb, u8 mode);
+ void (*try_idle)(struct musb *musb, unsigned long timeout);
+
+ int (*vbus_status)(struct musb *musb);
+ void (*set_vbus)(struct musb *musb, int on);
+
+ int (*adjust_channel_params)(struct dma_channel *channel,
+ u16 packet_sz, u8 *mode,
+ dma_addr_t *dma_addr, u32 *len);
+};
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+ struct musb *musb;
+ void __iomem *fifo;
+ void __iomem *regs;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+ void __iomem *conf;
+#endif
+
+ /* index in musb->endpoints[] */
+ u8 epnum;
+
+ /* hardware configuration, possibly dynamic */
+ bool is_shared_fifo;
+ bool tx_double_buffered;
+ bool rx_double_buffered;
+ u16 max_packet_sz_tx;
+ u16 max_packet_sz_rx;
+
+ struct dma_channel *tx_channel;
+ struct dma_channel *rx_channel;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+ /* TUSB has "asynchronous" and "synchronous" dma modes */
+ dma_addr_t fifo_async;
+ dma_addr_t fifo_sync;
+ void __iomem *fifo_sync_va;
+#endif
+
+ void __iomem *target_regs;
+
+ /* currently scheduled peripheral endpoint */
+ struct musb_qh *in_qh;
+ struct musb_qh *out_qh;
+
+ u8 rx_reinit;
+ u8 tx_reinit;
+
+ /* peripheral side */
+ struct musb_ep ep_in; /* TX */
+ struct musb_ep ep_out; /* RX */
+};
+
+static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+ return next_request(&hw_ep->ep_in);
+}
+
+static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+ return next_request(&hw_ep->ep_out);
+}
+
+struct musb_csr_regs {
+ /* FIFO registers */
+ u16 txmaxp, txcsr, rxmaxp, rxcsr;
+ u16 rxfifoadd, txfifoadd;
+ u8 txtype, txinterval, rxtype, rxinterval;
+ u8 rxfifosz, txfifosz;
+ u8 txfunaddr, txhubaddr, txhubport;
+ u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+ u8 power;
+ u16 intrtxe, intrrxe;
+ u8 intrusbe;
+ u16 frame;
+ u8 index, testmode;
+
+ u8 devctl, busctl, misc;
+ u32 otg_interfsel;
+
+ struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+ /* device lock */
+ spinlock_t lock;
+
+ const struct musb_platform_ops *ops;
+ struct musb_context_registers context;
+
+ irqreturn_t (*isr)(int, void *);
+ struct work_struct irq_work;
+ u16 hwvers;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME (1 << 31)
+
+ u32 port1_status;
+
+ unsigned long rh_timer;
+
+ enum musb_h_ep0_state ep0_stage;
+
+ /* bulk traffic normally dedicates endpoint hardware, and each
+ * direction has its own ring of host side endpoints.
+ * we try to progress the transfer at the head of each endpoint's
+ * queue until it completes or NAKs too much; then we try the next
+ * endpoint.
+ */
+ struct musb_hw_ep *bulk_ep;
+
+ struct list_head control; /* of musb_qh */
+ struct list_head in_bulk; /* of musb_qh */
+ struct list_head out_bulk; /* of musb_qh */
+
+ struct timer_list otg_timer;
+ struct notifier_block nb;
+
+ struct dma_controller *dma_controller;
+
+ struct device *controller;
+ void __iomem *ctrl_base;
+ void __iomem *mregs;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+ dma_addr_t async;
+ dma_addr_t sync;
+ void __iomem *sync_va;
+#endif
+
+ /* passed down from chip/board specific irq handlers */
+ u8 int_usb;
+ u16 int_rx;
+ u16 int_tx;
+
+ struct usb_phy *xceiv;
+
+ int nIrq;
+ unsigned irq_wake:1;
+
+ struct musb_hw_ep endpoints[MUSB_C_NUM_EPS];
+#define control_ep endpoints
+
+#define VBUSERR_RETRY_COUNT 3
+ u16 vbuserr_retry;
+ u16 epmask;
+ u8 nr_endpoints;
+
+ u8 board_mode; /* enum musb_mode */
+ int (*board_set_power)(int state);
+
+ u8 min_power; /* vbus for periph, in mA/2 */
+
+ bool is_host;
+
+ int a_wait_bcon; /* VBUS timeout in msecs */
+ unsigned long idle_timeout; /* Next timeout in jiffies */
+
+ /* active means connected and not suspended */
+ unsigned is_active:1;
+
+ unsigned is_multipoint:1;
+ unsigned ignore_disconnect:1; /* during bus resets */
+
+ unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
+ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
+ unsigned dyn_fifo:1; /* dynamic FIFO supported? */
+
+ unsigned bulk_split:1;
+#define can_bulk_split(musb,type) \
+ (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+
+ unsigned bulk_combine:1;
+#define can_bulk_combine(musb,type) \
+ (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+
+ /* is_suspended means USB B_PERIPHERAL suspend */
+ unsigned is_suspended:1;
+
+ /* may_wakeup means remote wakeup is enabled */
+ unsigned may_wakeup:1;
+
+ /* is_self_powered is reported in device status and the
+ * config descriptor. is_bus_powered means B_PERIPHERAL
+ * draws some VBUS current; both can be true.
+ */
+ unsigned is_self_powered:1;
+ unsigned is_bus_powered:1;
+
+ unsigned set_address:1;
+ unsigned test_mode:1;
+ unsigned softconnect:1;
+
+ u8 address;
+ u8 test_mode_nr;
+ u16 ackpend; /* ep0 */
+ enum musb_g_ep0_state ep0_state;
+ struct usb_gadget g; /* the gadget */
+ struct usb_gadget_driver *gadget_driver; /* its driver */
+
+ /*
+ * FIXME: Remove this flag.
+ *
+ * This is only added to allow Blackfin to work
+ * with current driver. For some unknown reason
+ * Blackfin doesn't work with double buffering
+ * and that's enabled by default.
+ *
+ * We added this flag to forcefully disable double
+ * buffering until we get it working.
+ */
+ unsigned double_buffer_not_ok:1;
+
+ struct musb_hdrc_config *config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+ struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+ return container_of(g, struct musb, g);
+}
+
+#ifdef CONFIG_BLACKFIN
+static inline int musb_read_fifosize(struct musb *musb,
+ struct musb_hw_ep *hw_ep, u8 epnum)
+{
+ musb->nr_endpoints++;
+ musb->epmask |= (1 << epnum);
+
+ if (epnum < 5) {
+ hw_ep->max_packet_sz_tx = 128;
+ hw_ep->max_packet_sz_rx = 128;
+ } else {
+ hw_ep->max_packet_sz_tx = 1024;
+ hw_ep->max_packet_sz_rx = 1024;
+ }
+ hw_ep->is_shared_fifo = false;
+
+ return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+ musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].is_shared_fifo = true;
+}
+
+#else
+
+static inline int musb_read_fifosize(struct musb *musb,
+ struct musb_hw_ep *hw_ep, u8 epnum)
+{
+ void *mbase = musb->mregs;
+ u8 reg = 0;
+
+ /* read from core using indexed model */
+ reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
+ /* 0's returned when no more endpoints */
+ if (!reg)
+ return -ENODEV;
+
+ musb->nr_endpoints++;
+ musb->epmask |= (1 << epnum);
+
+ hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+ /* shared TX/RX FIFO? */
+ if ((reg & 0xf0) == 0xf0) {
+ hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+ hw_ep->is_shared_fifo = true;
+ return 0;
+ } else {
+ hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+ hw_ep->is_shared_fifo = false;
+ }
+
+ return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+ musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].is_shared_fifo = true;
+}
+#endif /* CONFIG_BLACKFIN */
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+ if (musb->ops->set_vbus)
+ musb->ops->set_vbus(musb, is_on);
+}
+
+static inline void musb_platform_enable(struct musb *musb)
+{
+ if (musb->ops->enable)
+ musb->ops->enable(musb);
+}
+
+static inline void musb_platform_disable(struct musb *musb)
+{
+ if (musb->ops->disable)
+ musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+ if (!musb->ops->set_mode)
+ return 0;
+
+ return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+ unsigned long timeout)
+{
+ if (musb->ops->try_idle)
+ musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+ if (!musb->ops->vbus_status)
+ return 0;
+
+ return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+ if (!musb->ops->init)
+ return -EINVAL;
+
+ return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+ if (!musb->ops->exit)
+ return -EINVAL;
+
+ return musb->ops->exit(musb);
+}
+
+#ifdef __UBOOT__
+struct musb *
+musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
+ void *ctrl);
+#endif
+#endif /* __MUSB_CORE_H__ */
OpenPOWER on IntegriCloud