diff options
Diffstat (limited to 'drivers/power/Kconfig')
| -rw-r--r-- | drivers/power/Kconfig | 40 |
1 files changed, 29 insertions, 11 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1936e5f1fc..e86dd72c14 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -9,6 +9,7 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 + default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUN8I_H3 config SUNXI_NO_PMIC @@ -37,22 +38,32 @@ config AXP221_POWER Select this to enable support for the axp221/axp223 pmic found on most A23 and A31 boards. +config AXP818_POWER + boolean "axp818 pmic support" + depends on MACH_SUN8I_A83T + ---help--- + Say y here to enable support for the axp818 pmic found on + A83T dev board. + endchoice config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER + default 3300 if AXP818_POWER default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for generic 3.3V IO voltage for external devices like the lcd-panal and sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to - safe battery. On A31 devices dcdc1 is also used for VCC-IO. + safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T + dcdc1 is used for VCC-IO, nand, usb0, sd , etc. config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I @@ -62,10 +73,12 @@ config AXP_DCDC2_VOLT On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V. + On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. config AXP_DCDC3_VOLT int "axp pmic dcdc3 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + default 900 if AXP818_POWER default 1500 if AXP152_POWER default 1250 if AXP209_POWER default 1200 if MACH_SUN6I || MACH_SUN8I @@ -76,10 +89,11 @@ config AXP_DCDC3_VOLT should be 1.25V. On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. + On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. config AXP_DCDC4_VOLT int "axp pmic dcdc4 voltage" - depends on AXP152_POWER || AXP221_POWER + depends on AXP152_POWER || AXP221_POWER || AXP818_POWER default 1250 if AXP152_POWER default 1200 if MACH_SUN6I default 0 if MACH_SUN8I @@ -89,15 +103,18 @@ config AXP_DCDC4_VOLT On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. On A23 / A33 boards dcdc4 is unused and should be disabled. + On A83T boards dcdc4 is used for VDD-GPU. config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER + default 1800 if AXP818_POWER default 1500 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to disable dcdc5. - On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V. + On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V, + 1.8V for A83T. config AXP_ALDO1_VOLT int "axp pmic (a)ldo1 voltage" @@ -112,7 +129,7 @@ config AXP_ALDO1_VOLT config AXP_ALDO2_VOLT int "axp pmic (a)ldo2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER default 3000 if AXP152_POWER || AXP209_POWER default 0 if MACH_SUN6I default 2500 if MACH_SUN8I @@ -126,14 +143,15 @@ config AXP_ALDO2_VOLT config AXP_ALDO3_VOLT int "axp pmic (a)ldo3 voltage" - depends on AXP209_POWER || AXP221_POWER - default 0 if AXP209_POWER + depends on AXP209_POWER || AXP221_POWER || AXP818_POWER + default 0 if AXP209_POWER || AXP818_POWER default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. + On A83T aldo3 is used for LVDS, DSI, MIPI, HDMI, etc. config AXP_ALDO4_VOLT int "axp pmic (a)ldo4 voltage" @@ -172,7 +190,7 @@ config AXP_DLDO3_VOLT config AXP_DLDO4_VOLT int "axp pmic dldo4 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to |
