summaryrefslogtreecommitdiffstats
path: root/drivers/net/fsl-mc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fsl-mc')
-rw-r--r--drivers/net/fsl-mc/mc.c31
1 files changed, 13 insertions, 18 deletions
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index f4a050afcc..d02da9d171 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -224,13 +224,13 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size)
* Don't return with error here, since the MC firmware can
* still boot without a DPC
*/
- printf("fsl-mc: WARNING: No DPC image found\n");
+ printf("\nfsl-mc: WARNING: No DPC image found");
return 0;
}
dpc_size = fdt_totalsize(dpc_fdt_hdr);
if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) {
- printf("fsl-mc: ERROR: Bad DPC image (too large: %d)\n",
+ printf("\nfsl-mc: ERROR: Bad DPC image (too large: %d)\n",
dpc_size);
return -EINVAL;
}
@@ -278,13 +278,13 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size)
error = fdt_check_header(dpl_fdt_hdr);
if (error != 0) {
- printf("fsl-mc: ERROR: Bad DPL image (bad header)\n");
+ printf("\nfsl-mc: ERROR: Bad DPL image (bad header)\n");
return error;
}
dpl_size = fdt_totalsize(dpl_fdt_hdr);
if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) {
- printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n",
+ printf("\nfsl-mc: ERROR: Bad DPL image (too large: %d)\n",
dpl_size);
return -EINVAL;
}
@@ -329,7 +329,6 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR;
dmb();
- debug("Polling mc_ccsr_regs->reg_gsr ...\n");
assert(timeout_ms > 0);
for (;;) {
udelay(1000); /* throttle polling */
@@ -344,10 +343,7 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
}
if (timeout_ms == 0) {
- if (booting_mc)
- printf("fsl-mc: timeout booting management complex firmware\n");
- else
- printf("fsl-mc: timeout deploying data path layout\n");
+ printf("ERROR: timeout\n");
/* TODO: Get an error status from an MC CCSR register */
return -ETIMEDOUT;
@@ -360,15 +356,13 @@ static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr)
* appropriate errno, so that the status property is set to
* failure in the fsl,dprc device tree node.
*/
- if (booting_mc) {
- printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n",
- reg_gsr);
- } else {
- printf("fsl-mc: WARNING: Data path layout deployed with error (GSR: %#x)\n",
- reg_gsr);
- }
+ printf("WARNING: Firmware returned an error (GSR: %#x)\n",
+ reg_gsr);
+ } else {
+ printf("SUCCESS\n");
}
+
*final_reg_gsr = reg_gsr;
return 0;
}
@@ -464,7 +458,7 @@ int mc_init(void)
*/
out_le32(&mc_ccsr_regs->reg_gsr, 0xDD00);
- printf("\nfsl-mc: Booting Management Complex ...\n");
+ printf("\nfsl-mc: Booting Management Complex ... ");
/*
* Deassert reset and release MC core 0 to run
@@ -517,10 +511,11 @@ int mc_init(void)
* Tell the MC to deploy the DPL:
*/
out_le32(&mc_ccsr_regs->reg_gsr, 0x0);
- printf("\nfsl-mc: Deploying data path layout ...\n");
+ printf("fsl-mc: Deploying data path layout ... ");
error = wait_for_mc(false, &reg_gsr);
if (error != 0)
goto out;
+
out:
if (error != 0)
mc_boot_status = -error;
OpenPOWER on IntegriCloud