diff options
Diffstat (limited to 'drivers/ddr/marvell/axp/ddr3_dfs.c')
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_dfs.c | 1552 |
1 files changed, 1552 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/axp/ddr3_dfs.c b/drivers/ddr/marvell/axp/ddr3_dfs.c new file mode 100644 index 0000000000..934777368a --- /dev/null +++ b/drivers/ddr/marvell/axp/ddr3_dfs.c @@ -0,0 +1,1552 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_hw_training.h" + +/* + * Debug + */ +#define DEBUG_DFS_C(s, d, l) \ + DEBUG_DFS_S(s); DEBUG_DFS_D(d, l); DEBUG_DFS_S("\n") +#define DEBUG_DFS_FULL_C(s, d, l) \ + DEBUG_DFS_FULL_S(s); DEBUG_DFS_FULL_D(d, l); DEBUG_DFS_FULL_S("\n") + +#ifdef MV_DEBUG_DFS +#define DEBUG_DFS_S(s) puts(s) +#define DEBUG_DFS_D(d, l) printf("%x", d) +#else +#define DEBUG_DFS_S(s) +#define DEBUG_DFS_D(d, l) +#endif + +#ifdef MV_DEBUG_DFS_FULL +#define DEBUG_DFS_FULL_S(s) puts(s) +#define DEBUG_DFS_FULL_D(d, l) printf("%x", d) +#else +#define DEBUG_DFS_FULL_S(s) +#define DEBUG_DFS_FULL_D(d, l) +#endif + +#if defined(MV88F672X) +extern u8 div_ratio[CLK_VCO][CLK_DDR]; +extern void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps); +#else +extern u16 odt_dynamic[ODT_OPT][MAX_CS]; +extern u8 div_ratio1to1[CLK_CPU][CLK_DDR]; +extern u8 div_ratio2to1[CLK_CPU][CLK_DDR]; +#endif +extern u16 odt_static[ODT_OPT][MAX_CS]; + +extern u32 cpu_fab_clk_to_hclk[FAB_OPT][CLK_CPU]; + +extern u32 ddr3_get_vco_freq(void); + +u32 ddr3_get_freq_parameter(u32 target_freq, int ratio_2to1); + +#ifdef MV_DEBUG_DFS +static inline void dfs_reg_write(u32 addr, u32 val) +{ + printf("\n write reg 0x%08x = 0x%08x", addr, val); + writel(val, INTER_REGS_BASE + addr); +} +#else +static inline void dfs_reg_write(u32 addr, u32 val) +{ + writel(val, INTER_REGS_BASE + addr); +} +#endif + +static void wait_refresh_op_complete(void) +{ + u32 reg; + + /* Poll - Wait for Refresh operation completion */ + do { + reg = reg_read(REG_SDRAM_OPERATION_ADDR) & + REG_SDRAM_OPERATION_CMD_RFRS_DONE; + } while (reg); /* Wait for '0' */ +} + +/* + * Name: ddr3_get_freq_parameter + * Desc: Finds CPU/DDR frequency ratio according to Sample@reset and table. + * Args: target_freq - target frequency + * Notes: + * Returns: freq_par - the ratio parameter + */ +u32 ddr3_get_freq_parameter(u32 target_freq, int ratio_2to1) +{ + u32 ui_vco_freq, freq_par; + + ui_vco_freq = ddr3_get_vco_freq(); + +#if defined(MV88F672X) + freq_par = div_ratio[ui_vco_freq][target_freq]; +#else + /* Find the ratio between PLL frequency and ddr-clk */ + if (ratio_2to1) + freq_par = div_ratio2to1[ui_vco_freq][target_freq]; + else + freq_par = div_ratio1to1[ui_vco_freq][target_freq]; +#endif + + return freq_par; +} + +/* + * Name: ddr3_dfs_high_2_low + * Desc: + * Args: freq - target frequency + * Notes: + * Returns: MV_OK - success, MV_FAIL - fail + */ +int ddr3_dfs_high_2_low(u32 freq, MV_DRAM_INFO *dram_info) +{ +#if defined(MV88F78X60) || defined(MV88F672X) + /* This Flow is relevant for ArmadaXP A0 */ + u32 reg, freq_par, tmp; + u32 cs = 0; + + DEBUG_DFS_C("DDR3 - DFS - High To Low - Starting DFS procedure to Frequency - ", + freq, 1); + + /* target frequency - 100MHz */ + freq_par = ddr3_get_freq_parameter(freq, 0); + +#if defined(MV88F672X) + u32 hclk; + u32 cpu_freq = ddr3_get_cpu_freq(); + get_target_freq(cpu_freq, &tmp, &hclk); +#endif + + /* Configure - DRAM DLL final state after DFS is complete - Enable */ + reg = reg_read(REG_DFS_ADDR); + /* [0] - DfsDllNextState - Disable */ + reg |= (1 << REG_DFS_DLLNEXTSTATE_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Configure - XBAR Retry response during Block to enable internal + * access - Disable + */ + reg = reg_read(REG_METAL_MASK_ADDR); + /* [0] - RetryMask - Disable */ + reg &= ~(1 << REG_METAL_MASK_RETRY_OFFS); + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + /* Configure - Block new external transactions - Enable */ + reg = reg_read(REG_DFS_ADDR); + reg |= (1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Enable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Registered DIMM support */ + if (dram_info->reg_dimm) { + /* + * Configure - Disable Register DIMM CKE Power + * Down mode - CWA_RC + */ + reg = (0x9 & REG_SDRAM_OPERATION_CWA_RC_MASK) << + REG_SDRAM_OPERATION_CWA_RC_OFFS; + /* + * Configure - Disable Register DIMM CKE Power + * Down mode - CWA_DATA + */ + reg |= ((0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + + /* + * Configure - Disable Register DIMM CKE Power + * Down mode - Set Delay - tMRD + */ + reg |= (0 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS); + + /* Configure - Issue CWA command with the above parameters */ + reg |= (REG_SDRAM_OPERATION_CMD_CWA & + ~(0xF << REG_SDRAM_OPERATION_CS_OFFS)); + + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for CWA operation completion */ + do { + reg = reg_read(REG_SDRAM_OPERATION_ADDR) & + (REG_SDRAM_OPERATION_CMD_MASK); + } while (reg); + + /* Configure - Disable outputs floating during Self Refresh */ + reg = reg_read(REG_REGISTERED_DRAM_CTRL_ADDR); + /* [15] - SRFloatEn - Disable */ + reg &= ~(1 << REG_REGISTERED_DRAM_CTRL_SR_FLOAT_OFFS); + /* 0x16D0 - DDR3 Registered DRAM Control */ + dfs_reg_write(REG_REGISTERED_DRAM_CTRL_ADDR, reg); + } + + /* Optional - Configure - DDR3_Rtt_nom_CS# */ + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + reg = reg_read(REG_DDR3_MR1_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)); + reg &= REG_DDR3_MR1_RTT_MASK; + dfs_reg_write(REG_DDR3_MR1_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* Configure - Move DRAM into Self Refresh */ + reg = reg_read(REG_DFS_ADDR); + reg |= (1 << REG_DFS_SR_OFFS); /* [2] - DfsSR - Enable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Poll - Wait for Self Refresh indication */ + do { + reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS)); + } while (reg == 0x0); /* 0x1528 [3] - DfsAtSR - Wait for '1' */ + + /* Start of clock change procedure (PLL) */ +#if defined(MV88F672X) + /* avantaLP */ + /* Configure cpupll_clkdiv_reset_mask */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL0_MASK; + /* 0xE8264[7:0] 0xff CPU Clock Dividers Reset mask */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, (reg + 0xFF)); + + /* Configure cpu_clkdiv_reload_smooth */ + reg = reg_read(CPU_PLL_CNTRL0); + reg &= CPU_PLL_CNTRL0_RELOAD_SMOOTH_MASK; + /* 0xE8260 [15:8] 0x2 CPU Clock Dividers Reload Smooth enable */ + dfs_reg_write(CPU_PLL_CNTRL0, + (reg + (2 << CPU_PLL_CNTRL0_RELOAD_SMOOTH_OFFS))); + + /* Configure cpupll_clkdiv_relax_en */ + reg = reg_read(CPU_PLL_CNTRL0); + reg &= CPU_PLL_CNTRL0_RELAX_EN_MASK; + /* 0xE8260 [31:24] 0x2 Relax Enable */ + dfs_reg_write(CPU_PLL_CNTRL0, + (reg + (2 << CPU_PLL_CNTRL0_RELAX_EN_OFFS))); + + /* Configure cpupll_clkdiv_ddr_clk_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL1); + /* + * 0xE8268 [13:8] N Set Training clock: + * APLL Out Clock (VCO freq) / N = 100 MHz + */ + reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL1_MASK; + reg |= (freq_par << 8); /* full Integer ratio from PLL-out to ddr-clk */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL1, reg); + + /* Configure cpupll_clkdiv_reload_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK; + /* 0xE8264 [8]=0x1 CPU Clock Dividers Reload Ratio trigger set */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, + (reg + (1 << CPU_PLL_CLOCK_RELOAD_RATIO_OFFS))); + + udelay(1); + + /* Configure cpupll_clkdiv_reload_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK; + /* 0xE8264 [8]=0x0 CPU Clock Dividers Reload Ratio trigger clear */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, reg); + + udelay(5); + +#else + /* + * Initial Setup - assure that the "load new ratio" is clear (bit 24) + * and in the same chance, block reassertions of reset [15:8] and + * force reserved bits[7:0]. + */ + reg = 0x0000FDFF; + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + /* + * RelaX whenever reset is asserted to that channel + * (good for any case) + */ + reg = 0x0000FF00; + /* 0x18704 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + reg = reg_read(REG_CPU_DIV_CLK_CTRL_2_ADDR) & + REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK; + + /* full Integer ratio from PLL-out to ddr-clk */ + reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS); + /* 0x1870C - CPU Div CLK control 3 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_2_ADDR, reg); + + /* + * Shut off clock enable to the DDRPHY clock channel (this is the "D"). + * All the rest are kept as is (forced, but could be read-modify-write). + * This is done now by RMW above. + */ + + /* Clock is not shut off gracefully - keep it running */ + reg = 0x000FFF02; + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg); + + /* Wait before replacing the clock on the DDR Phy Channel. */ + udelay(1); + + /* + * This for triggering the frequency update. Bit[24] is the + * central control + * bits [23:16] == which channels to change ==2 ==> + * only DDR Phy (smooth transition) + * bits [15:8] == mask reset reassertion due to clock modification + * to these channels. + * bits [7:0] == not in use + */ + reg = 0x0102FDFF; + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(1); /* Wait 1usec */ + + /* + * Poll Div CLK status 0 register - indication that the clocks + * are active - 0x18718 [8] + */ + do { + reg = (reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR)) & + (1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS); + } while (reg == 0); + + /* + * Clean the CTRL0, to be ready for next resets and next requests + * of ratio modifications. + */ + reg = 0x000000FF; + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(5); +#endif + /* End of clock change procedure (PLL) */ + + /* Configure - Select normal clock for the DDR PHY - Enable */ + reg = reg_read(REG_DRAM_INIT_CTRL_STATUS_ADDR); + /* [16] - ddr_phy_trn_clk_sel - Enable */ + reg |= (1 << REG_DRAM_INIT_CTRL_TRN_CLK_OFFS); + /* 0x18488 - DRAM Init control status register */ + dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg); + + /* Configure - Set Correct Ratio - 1:1 */ + /* [15] - Phy2UnitClkRatio = 0 - Set 1:1 Ratio between Dunit and Phy */ + + reg = reg_read(REG_DDR_IO_ADDR) & ~(1 << REG_DDR_IO_CLK_RATIO_OFFS); + dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */ + + /* Configure - 2T Mode - Restore original configuration */ + reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR); + /* [3:4] 2T - 1T Mode - low freq */ + reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS); + /* 0x1404 - DDR Controller Control Low Register */ + dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg); + + /* Configure - Restore CL and CWL - MRS Commands */ + reg = reg_read(REG_DFS_ADDR); + reg &= ~(REG_DFS_CL_NEXT_STATE_MASK << REG_DFS_CL_NEXT_STATE_OFFS); + reg &= ~(REG_DFS_CWL_NEXT_STATE_MASK << REG_DFS_CWL_NEXT_STATE_OFFS); + /* [8] - DfsCLNextState - MRS CL=6 after DFS (due to DLL-off mode) */ + reg |= (0x4 << REG_DFS_CL_NEXT_STATE_OFFS); + /* [12] - DfsCWLNextState - MRS CWL=6 after DFS (due to DLL-off mode) */ + reg |= (0x1 << REG_DFS_CWL_NEXT_STATE_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Poll - Wait for APLL + ADLLs lock on new frequency */ + do { + reg = (reg_read(REG_PHY_LOCK_STATUS_ADDR)) & + REG_PHY_LOCK_APLL_ADLL_STATUS_MASK; + /* 0x1674 [10:0] - Phy lock status Register */ + } while (reg != REG_PHY_LOCK_APLL_ADLL_STATUS_MASK); + + /* Configure - Reset the PHY Read FIFO and Write channels - Set Reset */ + reg = (reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK); + /* [30:29] = 0 - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* + * Configure - DRAM Data PHY Read [30], Write [29] path + * reset - Release Reset + */ + reg = (reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK); + /* [30:29] = '11' - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* Registered DIMM support */ + if (dram_info->reg_dimm) { + /* + * Configure - Change register DRAM operating speed + * (below 400MHz) - CWA_RC + */ + reg = (0xA & REG_SDRAM_OPERATION_CWA_RC_MASK) << + REG_SDRAM_OPERATION_CWA_RC_OFFS; + + /* + * Configure - Change register DRAM operating speed + * (below 400MHz) - CWA_DATA + */ + reg |= ((0x0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + + /* Configure - Set Delay - tSTAB */ + reg |= (0x1 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS); + + /* Configure - Issue CWA command with the above parameters */ + reg |= (REG_SDRAM_OPERATION_CMD_CWA & + ~(0xF << REG_SDRAM_OPERATION_CS_OFFS)); + + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for CWA operation completion */ + do { + reg = reg_read(REG_SDRAM_OPERATION_ADDR) & + (REG_SDRAM_OPERATION_CMD_MASK); + } while (reg); + } + + /* Configure - Exit Self Refresh */ + /* [2] - DfsSR */ + reg = (reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS)); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll - DFS Register - 0x1528 [3] - DfsAtSR - All DRAM devices + * on all ranks are NOT in self refresh mode + */ + do { + reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS)); + } while (reg); /* Wait for '0' */ + + /* Configure - Issue Refresh command */ + /* [3-0] = 0x2 - Refresh Command, [11-8] - enabled Cs */ + reg = REG_SDRAM_OPERATION_CMD_RFRS; + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) + reg &= ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + } + + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* Configure - Block new external transactions - Disable */ + reg = reg_read(REG_DFS_ADDR); + reg &= ~(1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Disable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Configure - XBAR Retry response during Block to enable + * internal access - Disable + */ + reg = reg_read(REG_METAL_MASK_ADDR); + /* [0] - RetryMask - Enable */ + reg |= (1 << REG_METAL_MASK_RETRY_OFFS); + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + /* Configure - Set CL */ + reg = reg_read(REG_DDR3_MR0_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)) & + ~REG_DDR3_MR0_CL_MASK; + tmp = 0x4; /* CL=6 - 0x4 */ + reg |= ((tmp & 0x1) << REG_DDR3_MR0_CL_OFFS); + reg |= ((tmp & 0xE) << REG_DDR3_MR0_CL_HIGH_OFFS); + dfs_reg_write(REG_DDR3_MR0_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + + /* Configure - Set CWL */ + reg = reg_read(REG_DDR3_MR2_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)) + & ~(REG_DDR3_MR2_CWL_MASK << REG_DDR3_MR2_CWL_OFFS); + /* CWL=6 - 0x1 */ + reg |= ((0x1) << REG_DDR3_MR2_CWL_OFFS); + dfs_reg_write(REG_DDR3_MR2_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + DEBUG_DFS_C("DDR3 - DFS - High To Low - Ended successfuly - new Frequency - ", + freq, 1); + + return MV_OK; +#else + /* This Flow is relevant for Armada370 A0 and ArmadaXP Z1 */ + + u32 reg, freq_par; + u32 cs = 0; + + DEBUG_DFS_C("DDR3 - DFS - High To Low - Starting DFS procedure to Frequency - ", + freq, 1); + + /* target frequency - 100MHz */ + freq_par = ddr3_get_freq_parameter(freq, 0); + + reg = 0x0000FF00; + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + /* 0x1600 - ODPG_CNTRL_Control */ + reg = reg_read(REG_ODPG_CNTRL_ADDR); + /* [21] = 1 - auto refresh disable */ + reg |= (1 << REG_ODPG_CNTRL_OFFS); + dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg); + + /* 0x1670 - PHY lock mask register */ + reg = reg_read(REG_PHY_LOCK_MASK_ADDR); + reg &= REG_PHY_LOCK_MASK_MASK; /* [11:0] = 0 */ + dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg); + + reg = reg_read(REG_DFS_ADDR); /* 0x1528 - DFS register */ + + /* Disable reconfig */ + reg &= ~0x10; /* [4] - Enable reconfig MR registers after DFS_ERG */ + reg |= 0x1; /* [0] - DRAM DLL disabled after DFS */ + + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + reg = reg_read(REG_METAL_MASK_ADDR) & ~(1 << 0); /* [0] - disable */ + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + /* [1] - DFS Block enable */ + reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_BLOCK_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* [2] - DFS Self refresh enable */ + reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_SR_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll DFS Register - 0x1528 [3] - DfsAtSR - + * All DRAM devices on all ranks are in self refresh mode - + * DFS can be executed afterwards + */ + do { + reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS); + } while (reg == 0x0); /* Wait for '1' */ + + /* Disable ODT on DLL-off mode */ + dfs_reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, + REG_SDRAM_ODT_CTRL_HIGH_OVRD_MASK); + + /* [11:0] = 0 */ + reg = (reg_read(REG_PHY_LOCK_MASK_ADDR) & REG_PHY_LOCK_MASK_MASK); + /* 0x1670 - PHY lock mask register */ + dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg); + + /* Add delay between entering SR and start ratio modification */ + udelay(1); + + /* + * Initial Setup - assure that the "load new ratio" is clear (bit 24) + * and in the same chance, block reassertions of reset [15:8] and + * force reserved bits[7:0]. + */ + reg = 0x0000FDFF; + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + /* + * RelaX whenever reset is asserted to that channel (good for any case) + */ + reg = 0x0000FF00; + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + reg = reg_read(REG_CPU_DIV_CLK_CTRL_3_ADDR) & + REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK; + /* Full Integer ratio from PLL-out to ddr-clk */ + reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS); + /* 0x1870C - CPU Div CLK control 3 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_3_ADDR, reg); + + /* + * Shut off clock enable to the DDRPHY clock channel (this is the "D"). + * All the rest are kept as is (forced, but could be read-modify-write). + * This is done now by RMW above. + */ + + /* Clock is not shut off gracefully - keep it running */ + reg = 0x000FFF02; + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg); + + /* Wait before replacing the clock on the DDR Phy Channel. */ + udelay(1); + + /* + * This for triggering the frequency update. Bit[24] is the + * central control + * bits [23:16] == which channels to change ==2 ==> only DDR Phy + * (smooth transition) + * bits [15:8] == mask reset reassertion due to clock modification + * to these channels. + * bits [7:0] == not in use + */ + reg = 0x0102FDFF; + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(1); /* Wait 1usec */ + + /* + * Poll Div CLK status 0 register - indication that the clocks + * are active - 0x18718 [8] + */ + do { + reg = (reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR)) & + (1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS); + } while (reg == 0); + + /* + * Clean the CTRL0, to be ready for next resets and next requests of + * ratio modifications. + */ + reg = 0x000000FF; + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(5); + + /* Switch HCLK Mux to training clk (100Mhz), keep DFS request bit */ + reg = 0x20050000; + /* 0x18488 - DRAM Init control status register */ + dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg); + + reg = reg_read(REG_DDR_IO_ADDR) & ~(1 << REG_DDR_IO_CLK_RATIO_OFFS); + /* [15] = 0 - Set 1:1 Ratio between Dunit and Phy */ + dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Regist */ + + reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK; + /* [31:30]] - reset pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + reg = (reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK); + /* [31:30] - normal pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + udelay(1); /* Wait 1usec */ + + /* 0x1404 */ + reg = (reg_read(REG_DUNIT_CTRL_LOW_ADDR) & 0xFFFFFFE7); + dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg); + + /* Poll Phy lock status register - APLL lock indication - 0x1674 */ + do { + reg = (reg_read(REG_PHY_LOCK_STATUS_ADDR)) & + REG_PHY_LOCK_STATUS_LOCK_MASK; + } while (reg != REG_PHY_LOCK_STATUS_LOCK_MASK); /* Wait for '0xFFF' */ + + reg = (reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK); + /* [30:29] = 0 - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK; + /* [30:29] = '11' - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + udelay(1000); /* Wait 1msec */ + + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* Config CL and CWL with MR0 and MR2 registers */ + reg = reg_read(REG_DDR3_MR0_ADDR); + reg &= ~0x74; /* CL [3:0]; [6:4],[2] */ + reg |= (1 << 5); /* CL = 4, CAS is 6 */ + dfs_reg_write(REG_DDR3_MR0_ADDR, reg); + reg = REG_SDRAM_OPERATION_CMD_MR0 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + reg = reg_read(REG_DDR3_MR2_ADDR); + reg &= ~0x38; /* CWL [5:3] */ + reg |= (1 << 3); /* CWL = 1, CWL is 6 */ + dfs_reg_write(REG_DDR3_MR2_ADDR, reg); + + reg = REG_SDRAM_OPERATION_CMD_MR2 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* Set current rd_sample_delay */ + reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR); + reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK << + (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + reg |= (5 << (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + dfs_reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg); + + /* Set current rd_ready_delay */ + reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR); + reg &= ~(REG_READ_DATA_READY_DELAYS_MASK << + (REG_READ_DATA_READY_DELAYS_OFFS * cs)); + reg |= ((6) << (REG_READ_DATA_READY_DELAYS_OFFS * cs)); + dfs_reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg); + } + } + + /* [2] - DFS Self refresh disable */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* [1] - DFS Block enable */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_BLOCK_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll DFS Register - 0x1528 [3] - DfsAtSR - + * All DRAM devices on all ranks are in self refresh mode - DFS can + * be executed afterwards + */ + do { + reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS); + } while (reg); /* Wait for '1' */ + + reg = (reg_read(REG_METAL_MASK_ADDR) | (1 << 0)); + /* [0] - Enable Dunit to crossbar retry */ + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + /* 0x1600 - PHY lock mask register */ + reg = reg_read(REG_ODPG_CNTRL_ADDR); + reg &= ~(1 << REG_ODPG_CNTRL_OFFS); /* [21] = 0 */ + dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg); + + /* 0x1670 - PHY lock mask register */ + reg = reg_read(REG_PHY_LOCK_MASK_ADDR); + reg |= ~REG_PHY_LOCK_MASK_MASK; /* [11:0] = FFF */ + dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg); + + DEBUG_DFS_C("DDR3 - DFS - High To Low - Ended successfuly - new Frequency - ", + freq, 1); + + return MV_OK; +#endif +} + +/* + * Name: ddr3_dfs_low_2_high + * Desc: + * Args: freq - target frequency + * Notes: + * Returns: MV_OK - success, MV_FAIL - fail + */ +int ddr3_dfs_low_2_high(u32 freq, int ratio_2to1, MV_DRAM_INFO *dram_info) +{ +#if defined(MV88F78X60) || defined(MV88F672X) + /* This Flow is relevant for ArmadaXP A0 */ + u32 reg, freq_par, tmp; + u32 cs = 0; + + DEBUG_DFS_C("DDR3 - DFS - Low To High - Starting DFS procedure to Frequency - ", + freq, 1); + + /* target frequency - freq */ + freq_par = ddr3_get_freq_parameter(freq, ratio_2to1); + +#if defined(MV88F672X) + u32 hclk; + u32 cpu_freq = ddr3_get_cpu_freq(); + get_target_freq(cpu_freq, &tmp, &hclk); +#endif + + /* Configure - DRAM DLL final state after DFS is complete - Enable */ + reg = reg_read(REG_DFS_ADDR); + /* [0] - DfsDllNextState - Enable */ + reg &= ~(1 << REG_DFS_DLLNEXTSTATE_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Configure - XBAR Retry response during Block to enable + * internal access - Disable + */ + reg = reg_read(REG_METAL_MASK_ADDR); + /* [0] - RetryMask - Disable */ + reg &= ~(1 << REG_METAL_MASK_RETRY_OFFS); + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + /* Configure - Block new external transactions - Enable */ + reg = reg_read(REG_DFS_ADDR); + reg |= (1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Enable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Configure - Move DRAM into Self Refresh */ + reg = reg_read(REG_DFS_ADDR); + reg |= (1 << REG_DFS_SR_OFFS); /* [2] - DfsSR - Enable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Poll - Wait for Self Refresh indication */ + do { + reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS)); + } while (reg == 0x0); /* 0x1528 [3] - DfsAtSR - Wait for '1' */ + + /* Start of clock change procedure (PLL) */ +#if defined(MV88F672X) + /* avantaLP */ + /* Configure cpupll_clkdiv_reset_mask */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL0_MASK; + /* 0xE8264[7:0] 0xff CPU Clock Dividers Reset mask */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, (reg + 0xFF)); + + /* Configure cpu_clkdiv_reload_smooth */ + reg = reg_read(CPU_PLL_CNTRL0); + reg &= CPU_PLL_CNTRL0_RELOAD_SMOOTH_MASK; + /* 0xE8260 [15:8] 0x2 CPU Clock Dividers Reload Smooth enable */ + dfs_reg_write(CPU_PLL_CNTRL0, + reg + (2 << CPU_PLL_CNTRL0_RELOAD_SMOOTH_OFFS)); + + /* Configure cpupll_clkdiv_relax_en */ + reg = reg_read(CPU_PLL_CNTRL0); + reg &= CPU_PLL_CNTRL0_RELAX_EN_MASK; + /* 0xE8260 [31:24] 0x2 Relax Enable */ + dfs_reg_write(CPU_PLL_CNTRL0, + reg + (2 << CPU_PLL_CNTRL0_RELAX_EN_OFFS)); + + /* Configure cpupll_clkdiv_ddr_clk_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL1); + /* + * 0xE8268 [13:8] N Set Training clock: + * APLL Out Clock (VCO freq) / N = 100 MHz + */ + reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL1_MASK; + reg |= (freq_par << 8); /* full Integer ratio from PLL-out to ddr-clk */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL1, reg); + /* Configure cpupll_clkdiv_reload_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK; + /* 0xE8264 [8]=0x1 CPU Clock Dividers Reload Ratio trigger set */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, + reg + (1 << CPU_PLL_CLOCK_RELOAD_RATIO_OFFS)); + + udelay(1); + + /* Configure cpupll_clkdiv_reload_ratio */ + reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0); + reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK; + /* 0xE8264 [8]=0x0 CPU Clock Dividers Reload Ratio trigger clear */ + dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, reg); + + udelay(5); + +#else + /* + * Initial Setup - assure that the "load new ratio" is clear (bit 24) + * and in the same chance, block reassertions of reset [15:8] + * and force reserved bits[7:0]. + */ + reg = 0x0000FFFF; + + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + /* + * RelaX whenever reset is asserted to that channel (good for any case) + */ + reg = 0x0000FF00; + /* 0x18704 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + reg = reg_read(REG_CPU_DIV_CLK_CTRL_2_ADDR) & + REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK; + reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS); + /* full Integer ratio from PLL-out to ddr-clk */ + /* 0x1870C - CPU Div CLK control 3 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_2_ADDR, reg); + + /* + * Shut off clock enable to the DDRPHY clock channel (this is the "D"). + * All the rest are kept as is (forced, but could be read-modify-write). + * This is done now by RMW above. + */ + reg = 0x000FFF02; + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg); + + /* Wait before replacing the clock on the DDR Phy Channel. */ + udelay(1); + + reg = 0x0102FDFF; + /* + * This for triggering the frequency update. Bit[24] is the + * central control + * bits [23:16] == which channels to change ==2 ==> only DDR Phy + * (smooth transition) + * bits [15:8] == mask reset reassertion due to clock modification + * to these channels. + * bits [7:0] == not in use + */ + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(1); + + /* + * Poll Div CLK status 0 register - indication that the clocks + * are active - 0x18718 [8] + */ + do { + reg = reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR) & + (1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS); + } while (reg == 0); + + reg = 0x000000FF; + /* + * Clean the CTRL0, to be ready for next resets and next requests + * of ratio modifications. + */ + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); +#endif + /* End of clock change procedure (PLL) */ + + if (ratio_2to1) { + /* Configure - Select normal clock for the DDR PHY - Disable */ + reg = reg_read(REG_DRAM_INIT_CTRL_STATUS_ADDR); + /* [16] - ddr_phy_trn_clk_sel - Disable */ + reg &= ~(1 << REG_DRAM_INIT_CTRL_TRN_CLK_OFFS); + /* 0x18488 - DRAM Init control status register */ + dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg); + } + + /* + * Configure - Set Correct Ratio - according to target ratio + * parameter - 2:1/1:1 + */ + if (ratio_2to1) { + /* + * [15] - Phy2UnitClkRatio = 1 - Set 2:1 Ratio between + * Dunit and Phy + */ + reg = reg_read(REG_DDR_IO_ADDR) | + (1 << REG_DDR_IO_CLK_RATIO_OFFS); + } else { + /* + * [15] - Phy2UnitClkRatio = 0 - Set 1:1 Ratio between + * Dunit and Phy + */ + reg = reg_read(REG_DDR_IO_ADDR) & + ~(1 << REG_DDR_IO_CLK_RATIO_OFFS); + } + dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */ + + /* Configure - 2T Mode - Restore original configuration */ + reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR); + /* [3:4] 2T - Restore value */ + reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS); + reg |= ((dram_info->mode_2t & REG_DUNIT_CTRL_LOW_2T_MASK) << + REG_DUNIT_CTRL_LOW_2T_OFFS); + /* 0x1404 - DDR Controller Control Low Register */ + dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg); + + /* Configure - Restore CL and CWL - MRS Commands */ + reg = reg_read(REG_DFS_ADDR); + reg &= ~(REG_DFS_CL_NEXT_STATE_MASK << REG_DFS_CL_NEXT_STATE_OFFS); + reg &= ~(REG_DFS_CWL_NEXT_STATE_MASK << REG_DFS_CWL_NEXT_STATE_OFFS); + + if (freq == DDR_400) { + if (dram_info->target_frequency == 0x8) + tmp = ddr3_cl_to_valid_cl(5); + else + tmp = ddr3_cl_to_valid_cl(6); + } else { + tmp = ddr3_cl_to_valid_cl(dram_info->cl); + } + + /* [8] - DfsCLNextState */ + reg |= ((tmp & REG_DFS_CL_NEXT_STATE_MASK) << REG_DFS_CL_NEXT_STATE_OFFS); + if (freq == DDR_400) { + /* [12] - DfsCWLNextState */ + reg |= (((0) & REG_DFS_CWL_NEXT_STATE_MASK) << + REG_DFS_CWL_NEXT_STATE_OFFS); + } else { + /* [12] - DfsCWLNextState */ + reg |= (((dram_info->cwl) & REG_DFS_CWL_NEXT_STATE_MASK) << + REG_DFS_CWL_NEXT_STATE_OFFS); + } + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Optional - Configure - DDR3_Rtt_nom_CS# */ + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + reg = reg_read(REG_DDR3_MR1_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)); + reg &= REG_DDR3_MR1_RTT_MASK; + reg |= odt_static[dram_info->cs_ena][cs]; + dfs_reg_write(REG_DDR3_MR1_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* Configure - Reset ADLLs - Set Reset */ + reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK; + /* [31:30]] - reset pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config Register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + /* Configure - Reset ADLLs - Release Reset */ + reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK; + /* [31:30] - normal pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + /* Poll - Wait for APLL + ADLLs lock on new frequency */ + do { + reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) & + REG_PHY_LOCK_APLL_ADLL_STATUS_MASK; + /* 0x1674 [10:0] - Phy lock status Register */ + } while (reg != REG_PHY_LOCK_APLL_ADLL_STATUS_MASK); + + /* Configure - Reset the PHY SDR clock divider */ + if (ratio_2to1) { + /* Pup Reset Divider B - Set Reset */ + /* [28] - DataPupRdRST = 0 */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) & + ~(1 << REG_SDRAM_CONFIG_PUPRSTDIV_OFFS); + /* [28] - DataPupRdRST = 1 */ + tmp = reg_read(REG_SDRAM_CONFIG_ADDR) | + (1 << REG_SDRAM_CONFIG_PUPRSTDIV_OFFS); + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* Pup Reset Divider B - Release Reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, tmp); + } + + /* Configure - Reset the PHY Read FIFO and Write channels - Set Reset */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK; + /* [30:29] = 0 - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* + * Configure - DRAM Data PHY Read [30], Write [29] path reset - + * Release Reset + */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK; + /* [30:29] = '11' - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* Registered DIMM support */ + if (dram_info->reg_dimm) { + /* + * Configure - Change register DRAM operating speed + * (DDR3-1333 / DDR3-1600) - CWA_RC + */ + reg = (0xA & REG_SDRAM_OPERATION_CWA_RC_MASK) << + REG_SDRAM_OPERATION_CWA_RC_OFFS; + if (freq <= DDR_400) { + /* + * Configure - Change register DRAM operating speed + * (DDR3-800) - CWA_DATA + */ + reg |= ((0x0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + } else if ((freq > DDR_400) && (freq <= DDR_533)) { + /* + * Configure - Change register DRAM operating speed + * (DDR3-1066) - CWA_DATA + */ + reg |= ((0x1 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + } else if ((freq > DDR_533) && (freq <= DDR_666)) { + /* + * Configure - Change register DRAM operating speed + * (DDR3-1333) - CWA_DATA + */ + reg |= ((0x2 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + } else { + /* + * Configure - Change register DRAM operating speed + * (DDR3-1600) - CWA_DATA + */ + reg |= ((0x3 & REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + } + + /* Configure - Set Delay - tSTAB */ + reg |= (0x1 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS); + /* Configure - Issue CWA command with the above parameters */ + reg |= (REG_SDRAM_OPERATION_CMD_CWA & + ~(0xF << REG_SDRAM_OPERATION_CS_OFFS)); + + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for CWA operation completion */ + do { + reg = reg_read(REG_SDRAM_OPERATION_ADDR) & + REG_SDRAM_OPERATION_CMD_MASK; + } while (reg); + } + + /* Configure - Exit Self Refresh */ + /* [2] - DfsSR */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll - DFS Register - 0x1528 [3] - DfsAtSR - All DRAM + * devices on all ranks are NOT in self refresh mode + */ + do { + reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS); + } while (reg); /* Wait for '0' */ + + /* Configure - Issue Refresh command */ + /* [3-0] = 0x2 - Refresh Command, [11-8] - enabled Cs */ + reg = REG_SDRAM_OPERATION_CMD_RFRS; + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) + reg &= ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + } + + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* Configure - Block new external transactions - Disable */ + reg = reg_read(REG_DFS_ADDR); + reg &= ~(1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Disable */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Configure - XBAR Retry response during Block to enable + * internal access - Disable + */ + reg = reg_read(REG_METAL_MASK_ADDR); + /* [0] - RetryMask - Enable */ + reg |= (1 << REG_METAL_MASK_RETRY_OFFS); + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + /* Configure - Set CL */ + reg = reg_read(REG_DDR3_MR0_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)) & + ~REG_DDR3_MR0_CL_MASK; + if (freq == DDR_400) + tmp = ddr3_cl_to_valid_cl(6); + else + tmp = ddr3_cl_to_valid_cl(dram_info->cl); + reg |= ((tmp & 0x1) << REG_DDR3_MR0_CL_OFFS); + reg |= ((tmp & 0xE) << REG_DDR3_MR0_CL_HIGH_OFFS); + dfs_reg_write(REG_DDR3_MR0_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + + /* Configure - Set CWL */ + reg = reg_read(REG_DDR3_MR2_CS_ADDR + + (cs << MR_CS_ADDR_OFFS)) & + ~(REG_DDR3_MR2_CWL_MASK << REG_DDR3_MR2_CWL_OFFS); + if (freq == DDR_400) + reg |= ((0) << REG_DDR3_MR2_CWL_OFFS); + else + reg |= ((dram_info->cwl) << REG_DDR3_MR2_CWL_OFFS); + dfs_reg_write(REG_DDR3_MR2_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + DEBUG_DFS_C("DDR3 - DFS - Low To High - Ended successfuly - new Frequency - ", + freq, 1); + + return MV_OK; + +#else + + /* This Flow is relevant for Armada370 A0 and ArmadaXP Z1 */ + + u32 reg, freq_par, tmp; + u32 cs = 0; + + DEBUG_DFS_C("DDR3 - DFS - Low To High - Starting DFS procedure to Frequency - ", + freq, 1); + + /* target frequency - freq */ + freq_par = ddr3_get_freq_parameter(freq, ratio_2to1); + + reg = 0x0000FF00; + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + /* 0x1600 - PHY lock mask register */ + reg = reg_read(REG_ODPG_CNTRL_ADDR); + reg |= (1 << REG_ODPG_CNTRL_OFFS); /* [21] = 1 */ + dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg); + + /* 0x1670 - PHY lock mask register */ + reg = reg_read(REG_PHY_LOCK_MASK_ADDR); + reg &= REG_PHY_LOCK_MASK_MASK; /* [11:0] = 0 */ + dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg); + + /* Enable reconfig MR Registers after DFS */ + reg = reg_read(REG_DFS_ADDR); /* 0x1528 - DFS register */ + /* [4] - Disable - reconfig MR registers after DFS_ERG */ + reg &= ~0x11; + /* [0] - Enable - DRAM DLL after DFS */ + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Disable DRAM Controller to crossbar retry */ + /* [0] - disable */ + reg = reg_read(REG_METAL_MASK_ADDR) & ~(1 << 0); + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + /* Enable DRAM Blocking */ + /* [1] - DFS Block enable */ + reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_BLOCK_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Enable Self refresh */ + /* [2] - DFS Self refresh enable */ + reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_SR_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll DFS Register - All DRAM devices on all ranks are in + * self refresh mode - DFS can be executed afterwards + */ + /* 0x1528 [3] - DfsAtSR */ + do { + reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS); + } while (reg == 0x0); /* Wait for '1' */ + + /* + * Set Correct Ratio - if freq>MARGIN_FREQ use 2:1 ratio + * else use 1:1 ratio + */ + if (ratio_2to1) { + /* [15] = 1 - Set 2:1 Ratio between Dunit and Phy */ + reg = reg_read(REG_DDR_IO_ADDR) | + (1 << REG_DDR_IO_CLK_RATIO_OFFS); + } else { + /* [15] = 0 - Set 1:1 Ratio between Dunit and Phy */ + reg = reg_read(REG_DDR_IO_ADDR) & + ~(1 << REG_DDR_IO_CLK_RATIO_OFFS); + } + dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */ + + /* Switch HCLK Mux from (100Mhz) [16]=0, keep DFS request bit */ + reg = 0x20040000; + /* + * [29] - training logic request DFS, [28:27] - + * preload patterns frequency [18] + */ + + /* 0x18488 - DRAM Init control status register */ + dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg); + + /* Add delay between entering SR and start ratio modification */ + udelay(1); + + /* + * Initial Setup - assure that the "load new ratio" is clear (bit 24) + * and in the same chance, block reassertions of reset [15:8] and + * force reserved bits[7:0]. + */ + reg = 0x0000FFFF; + /* 0x18700 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + /* + * RelaX whenever reset is asserted to that channel (good for any case) + */ + reg = 0x0000FF00; + /* 0x18704 - CPU Div CLK control 0 */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg); + + reg = reg_read(REG_CPU_DIV_CLK_CTRL_3_ADDR) & + REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK; + reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS); + /* Full Integer ratio from PLL-out to ddr-clk */ + /* 0x1870C - CPU Div CLK control 3 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_3_ADDR, reg); + + /* + * Shut off clock enable to the DDRPHY clock channel (this is the "D"). + * All the rest are kept as is (forced, but could be read-modify-write). + * This is done now by RMW above. + */ + + reg = 0x000FFF02; + + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg); + + /* Wait before replacing the clock on the DDR Phy Channel. */ + udelay(1); + + reg = 0x0102FDFF; + /* + * This for triggering the frequency update. Bit[24] is the + * central control + * bits [23:16] == which channels to change ==2 ==> only DDR Phy + * (smooth transition) + * bits [15:8] == mask reset reassertion due to clock modification + * to these channels. + * bits [7:0] == not in use + */ + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(1); + + /* + * Poll Div CLK status 0 register - indication that the clocks are + * active - 0x18718 [8] + */ + do { + reg = reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR) & + (1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS); + } while (reg == 0); + + reg = 0x000000FF; + /* + * Clean the CTRL0, to be ready for next resets and next requests of + * ratio modifications. + */ + /* 0x18700 - CPU Div CLK control 0 register */ + dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg); + + udelay(5); + + if (ratio_2to1) { + /* Pup Reset Divider B - Set Reset */ + /* [28] = 0 - Pup Reset Divider B */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) & ~(1 << 28); + /* [28] = 1 - Pup Reset Divider B */ + tmp = reg_read(REG_SDRAM_CONFIG_ADDR) | (1 << 28); + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* Pup Reset Divider B - Release Reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, tmp); + } + + /* DRAM Data PHYs ADLL Reset - Set Reset */ + reg = (reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK); + /* [31:30]] - reset pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config Register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + udelay(25); + + /* APLL lock indication - Poll Phy lock status Register - 0x1674 [9] */ + do { + reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) & + (1 << REG_PHY_LOCK_STATUS_LOCK_OFFS); + } while (reg == 0); + + /* DRAM Data PHYs ADLL Reset - Release Reset */ + reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK; + /* [31:30] - normal pup data ctrl ADLL */ + /* 0x15EC - DRAM PHY Config register */ + dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + + udelay(10000); /* Wait 10msec */ + + /* + * APLL lock indication - Poll Phy lock status Register - 0x1674 [11:0] + */ + do { + reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) & + REG_PHY_LOCK_STATUS_LOCK_MASK; + } while (reg != REG_PHY_LOCK_STATUS_LOCK_MASK); + + /* DRAM Data PHY Read [30], Write [29] path reset - Set Reset */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK; + /* [30:29] = 0 - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* DRAM Data PHY Read [30], Write [29] path reset - Release Reset */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK; + /* [30:29] = '11' - Data Pup R/W path reset */ + /* 0x1400 - SDRAM Configuration register */ + dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /* Disable DFS Reconfig */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << 4); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* [2] - DFS Self refresh disable */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* + * Poll DFS Register - 0x1528 [3] - DfsAtSR - All DRAM devices on + * all ranks are NOT in self refresh mode + */ + do { + reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS); + } while (reg); /* Wait for '0' */ + + /* 0x1404 */ + reg = (reg_read(REG_DUNIT_CTRL_LOW_ADDR) & 0xFFFFFFE7) | 0x2; + + /* Configure - 2T Mode - Restore original configuration */ + /* [3:4] 2T - Restore value */ + reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS); + reg |= ((dram_info->mode_2t & REG_DUNIT_CTRL_LOW_2T_MASK) << + REG_DUNIT_CTRL_LOW_2T_OFFS); + dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg); + + udelay(1); /* Wait 1us */ + + for (cs = 0; cs < MAX_CS; cs++) { + if (dram_info->cs_ena & (1 << cs)) { + reg = (reg_read(REG_DDR3_MR1_ADDR)); + /* DLL Enable */ + reg &= ~(1 << REG_DDR3_MR1_DLL_ENA_OFFS); + dfs_reg_write(REG_DDR3_MR1_ADDR, reg); + + /* Issue MRS Command to current cs */ + reg = REG_SDRAM_OPERATION_CMD_MR1 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* + * [3-0] = 0x4 - MR1 Command, [11-8] - + * enable current cs + */ + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* DLL Reset - MR0 */ + reg = reg_read(REG_DDR3_MR0_ADDR); + dfs_reg_write(REG_DDR3_MR0_ADDR, reg); + + /* Issue MRS Command to current cs */ + reg = REG_SDRAM_OPERATION_CMD_MR0 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* + * [3-0] = 0x4 - MR1 Command, [11-8] - + * enable current cs + */ + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + reg = reg_read(REG_DDR3_MR0_ADDR); + reg &= ~0x74; /* CL [3:0]; [6:4],[2] */ + + if (freq == DDR_400) + tmp = ddr3_cl_to_valid_cl(6) & 0xF; + else + tmp = ddr3_cl_to_valid_cl(dram_info->cl) & 0xF; + + reg |= ((tmp & 0x1) << 2); + reg |= ((tmp >> 1) << 4); /* to bit 4 */ + dfs_reg_write(REG_DDR3_MR0_ADDR, reg); + + reg = REG_SDRAM_OPERATION_CMD_MR0 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + reg = reg_read(REG_DDR3_MR2_ADDR); + reg &= ~0x38; /* CWL [5:3] */ + /* CWL = 0 ,for 400 MHg is 5 */ + if (freq != DDR_400) + reg |= dram_info->cwl << REG_DDR3_MR2_CWL_OFFS; + dfs_reg_write(REG_DDR3_MR2_ADDR, reg); + reg = REG_SDRAM_OPERATION_CMD_MR2 & + ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs)); + /* 0x1418 - SDRAM Operation Register */ + dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* Poll - Wait for Refresh operation completion */ + wait_refresh_op_complete(); + + /* Set current rd_sample_delay */ + reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR); + reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK << + (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + reg |= (dram_info->cl << + (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + dfs_reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg); + + /* Set current rd_ready_delay */ + reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR); + reg &= ~(REG_READ_DATA_READY_DELAYS_MASK << + (REG_READ_DATA_READY_DELAYS_OFFS * cs)); + reg |= ((dram_info->cl + 1) << + (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + dfs_reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg); + } + } + + /* Enable ODT on DLL-on mode */ + dfs_reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, 0); + + /* [1] - DFS Block disable */ + reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_BLOCK_OFFS); + dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */ + + /* Change DDR frequency to 100MHz procedure: */ + /* 0x1600 - PHY lock mask register */ + reg = reg_read(REG_ODPG_CNTRL_ADDR); + reg &= ~(1 << REG_ODPG_CNTRL_OFFS); /* [21] = 0 */ + dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg); + + /* Change DDR frequency to 100MHz procedure: */ + /* 0x1670 - PHY lock mask register */ + reg = reg_read(REG_PHY_LOCK_MASK_ADDR); + reg |= ~REG_PHY_LOCK_MASK_MASK; /* [11:0] = FFF */ + dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg); + + reg = reg_read(REG_METAL_MASK_ADDR) | (1 << 0); /* [0] - disable */ + /* 0x14B0 - Dunit MMask Register */ + dfs_reg_write(REG_METAL_MASK_ADDR, reg); + + DEBUG_DFS_C("DDR3 - DFS - Low To High - Ended successfuly - new Frequency - ", + freq, 1); + return MV_OK; +#endif +} |
