diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.clang | 4 | ||||
| -rw-r--r-- | doc/README.scrapyard | 5 | ||||
| -rw-r--r-- | doc/device-tree-bindings/ata/intel-sata.txt | 26 | ||||
| -rw-r--r-- | doc/device-tree-bindings/misc/intel-lpc.txt | 47 | ||||
| -rw-r--r-- | doc/device-tree-bindings/video/intel-gma.txt | 40 | ||||
| -rw-r--r-- | doc/git-mailrc | 8 |
6 files changed, 121 insertions, 9 deletions
diff --git a/doc/README.clang b/doc/README.clang index 52495d3116..fe36909449 100644 --- a/doc/README.clang +++ b/doc/README.clang @@ -28,7 +28,7 @@ sudo apt-get install clang To compile U-Boot with clang on linux without IAS use e.g.: export TRIPLET=arm-linux-gnueabi && export CROSS_COMPILE="$TRIPLET-" -make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_b_defconfig +make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_defconfig make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" all V=1 -j8 FreeBSD 11 (Current): @@ -42,7 +42,7 @@ ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as # The following commands compile U-Boot using the clang xdev toolchain. # NOTE: CROSS_COMPILE and target differ on purpose! export CROSS_COMPILE=arm-gnueabi-freebsd- -gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig +gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8 Given that u-boot will default to gcc, above commands can be diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 8ba6e0ae65..deb4af482b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,8 +12,9 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -PRS200 powerpc mpc5200 - - -MCC200 powerpc mpc5200 - - +hermes powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> +PRS200 powerpc mpc5200 ecfdcee 2014-11-12 +MCC200 powerpc mpc5200 ecfdcee 2014-11-12 TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> diff --git a/doc/device-tree-bindings/ata/intel-sata.txt b/doc/device-tree-bindings/ata/intel-sata.txt new file mode 100644 index 0000000000..5e4da832a3 --- /dev/null +++ b/doc/device-tree-bindings/ata/intel-sata.txt @@ -0,0 +1,26 @@ +Intel Pantherpoint SATA Device Binding +====================================== + +The device tree node which describes the operation of the Intel Pantherpoint +SATA device is as follows: + +Required properties : +- compatible = "intel,pantherpoint-ahci" +- intel,sata-mode : string, one of: + "ahci" : Use AHCI mode (default) + "combined" : Use combined IDE + legacy mode + "plain-ide" : Use plain IDE mode +- intel,sata-port-map : Which SATA ports are enabled, bit 0=enable first port, + bit 1=enable second port, etc. +- intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register +- intel,sata-port1-gen3-tx : Value for the IOBP_SP1G3IR register + +Example +------- + +sata { + compatible = "intel,pantherpoint-ahci"; + intel,sata-mode = "ahci"; + intel,sata-port-map = <1>; + intel,sata-port0-gen3-tx = <0x00880a7f>; +}; diff --git a/doc/device-tree-bindings/misc/intel-lpc.txt b/doc/device-tree-bindings/misc/intel-lpc.txt index 7e1b389237..ba6ca9dbc7 100644 --- a/doc/device-tree-bindings/misc/intel-lpc.txt +++ b/doc/device-tree-bindings/misc/intel-lpc.txt @@ -6,10 +6,37 @@ Count device is as follows: Required properties : - compatible = "intel,lpc" -- gen-dec : Specifies the values for the gen-dec registers. Up to four cell - pairs can be provided - the first of each pair is the base address and +- intel,alt-gp-smi-enable : Enable SMI sources. This cell is written to the + ALT_GP_SMI_EN register +- intel,gen-dec : Specifies the values for the gen-dec registers. Up to four + cell pairs can be provided - the first of each pair is the base address and the second is the size. These are written into the GENx_DEC registers of the LPC device +- intel,gpi-routing : Specifies the GPI routing. There are 16 cells, valid + values are: + 0 No effect (default) + 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + 2 SCI (if corresponding GPIO_EN bit is also set) +- intel,pirq-routing : Speciffies the routing IRQ number for each of PIRQA-H, + one cell for each. + 0x00 - 0000 = Reserved + 0x01 - 0001 = Reserved + 0x02 - 0010 = Reserved + 0x03 - 0011 = IRQ3 + 0x04 - 0100 = IRQ4 + 0x05 - 0101 = IRQ5 + 0x06 - 0110 = IRQ6 + 0x07 - 0111 = IRQ7 + 0x08 - 1000 = Reserved + 0x09 - 1001 = IRQ9 + 0x0A - 1010 = IRQ10 + 0x0B - 1011 = IRQ11 + 0x0C - 1100 = IRQ12 + 0x0D - 1101 = Reserved + 0x0E - 1110 = IRQ14 + 0x0F - 1111 = IRQ15 + PIRQ[n]_ROUT[7] - PIRQ Routing Control + 0x80 - The PIRQ is not routed. Example @@ -19,5 +46,19 @@ lpc { compatible = "intel,lpc"; #address-cells = <1>; #size-cells = <1>; - gen-dec = <0x800 0xfc 0x900 0xfc>; + intel,gen-dec = <0x800 0xfc 0x900 0xfc>; + + intel,pirq-routing = <0x8b 0x8a 0x8b 0x8b + 0x80 0x80 0x80 0x80>; + /* + * GPI routing + * 0 No effect (default) + * 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is + * also set) + * 2 SCI (if corresponding GPIO_EN bit is also set) + */ + intel,gpi-routing = <0 0 0 0 0 0 0 2 + 1 0 0 0 0 0 0 0>; + /* Enable EC SMI source */ + intel,alt-gp-smi-enable = <0x0100>; }; diff --git a/doc/device-tree-bindings/video/intel-gma.txt b/doc/device-tree-bindings/video/intel-gma.txt new file mode 100644 index 0000000000..914be4fedd --- /dev/null +++ b/doc/device-tree-bindings/video/intel-gma.txt @@ -0,0 +1,40 @@ +Intel GMA Bindings +================== + +This is the Intel Graphics Media Accelerator. This binding supports selection +of display parameters only. + + +Required properties: + - compatible : "intel,gma"; + +Optional properties: + - intel,dp-hotplug : values for digital port hotplug, one cell per value for + ports B, C and D + - intel,panel-port-select : output port to use: 0=LVDS 1=DP_B 2=DP_C 3=DP_D + - intel,panel-power-cycle-delay : T4 time sequence (6 = 500ms) + + The following delays are in units of 0.1ms: + - intel,panel-power-up-delay : T1+T2 time sequence + - intel,panel-power-down-delay : T3 time sequence + - intel,panel-power-backlight-on-delay : T5 time sequence + - intel,panel-power-backlight-off-delay : Tx time sequence + + - intel,cpu-backlight : Value for CPU Backlight PWM + - intel,pch-backlight : Value for PCH Backlight PWM + +Example +------- + +gma { + compatible = "intel,gma"; + intel,dp_hotplug = <0 0 0x06>; + intel,panel-port-select = <1>; + intel,panel-power-cycle-delay = <6>; + intel,panel-power-up-delay = <2000>; + intel,panel-power-down-delay = <500>; + intel,panel-power-backlight-on-delay = <2000>; + intel,panel-power-backlight-off-delay = <2000>; + intel,cpu-backlight = <0x00000200>; + intel,pch-backlight = <0x04000000>; +}; diff --git a/doc/git-mailrc b/doc/git-mailrc index ad22763960..6c79a6d930 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -14,6 +14,9 @@ alias aaribaud Albert Aribaud <albert.u.boot@aribaud.net> alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com> alias afleming Andy Fleming <afleming@gmail.com> alias ag Anatolij Gustschin <agust@denx.de> +alias alisonwang Alison Wang <alison.wang@freescale.com> +alias angelo_ts Angelo Dureghello <angelo@sysam.it> +alias danielschwierzeck Daniel Schwierzeck <daniel.schwierzeck@gmail.com> alias galak Kumar Gala <galak@kernel.crashing.org> alias gruss Graeme Russ <graeme.russ@gmail.com> alias hs Heiko Schocher <hs@denx.de> @@ -72,13 +75,13 @@ alias avr32 uboot, abiessmann alias bfin uboot, vapier, sonic alias blackfin bfin -alias m68k uboot, jasonjin +alias m68k uboot, alisonwang, angelo_ts alias coldfire m68k alias microblaze uboot, monstr alias mb microblaze -alias mips uboot, Shinya Kuribayashi <skuribay@pobox.com> +alias mips uboot, danielschwierzeck alias nds32 uboot, macpaul @@ -119,6 +122,7 @@ alias mmc uboot, panto alias nand uboot, scottwood alias net uboot, jhersh alias spi uboot, jagan +alias ubi uboot, hs alias usb uboot, marex alias video uboot, ag alias patman uboot, sjg |
