summaryrefslogtreecommitdiffstats
path: root/cpu/pxa
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/pxa')
-rw-r--r--cpu/pxa/config.mk1
-rw-r--r--cpu/pxa/cpu.c2
-rw-r--r--cpu/pxa/i2c.c23
-rw-r--r--cpu/pxa/interrupts.c6
-rw-r--r--cpu/pxa/mmc.c14
-rw-r--r--cpu/pxa/pxafb.c30
-rw-r--r--cpu/pxa/start.S40
-rw-r--r--cpu/pxa/usb.c4
8 files changed, 53 insertions, 67 deletions
diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk
index f0b86b7dc1..af910e2f67 100644
--- a/cpu/pxa/config.mk
+++ b/cpu/pxa/config.mk
@@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
#
# ========================================================================
PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index 0ee8180361..e84cb5b156 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -44,7 +44,7 @@ int cpu_init (void)
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index df537c4351..6b72ba13a0 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -37,7 +37,7 @@
#ifdef CONFIG_HARD_I2C
/*
- * - CFG_I2C_SPEED
+ * - CONFIG_SYS_I2C_SPEED
* - I2C_PXA_SLAVE_ADDR
*/
@@ -48,7 +48,7 @@
/*#define DEBUG_I2C 1 /###* activate local debugging output */
#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */
-#if (CFG_I2C_SPEED == 400000)
+#if (CONFIG_SYS_I2C_SPEED == 400000)
#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
#else
#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
@@ -254,7 +254,7 @@ i2c_transfer_finish:
void i2c_init(int speed, int slaveaddr)
{
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
@@ -329,7 +329,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* send memory address bytes;
* alen defines how much bytes we have to send.
*/
- /*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
+ /*addr &= ((1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)-1); */
addr_bytes[0] = (u8)((addr >> 0) & 0x000000FF);
addr_bytes[1] = (u8)((addr >> 8) & 0x000000FF);
addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
@@ -455,19 +455,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
-uchar i2c_reg_read (uchar chip, uchar reg)
-{
- uchar buf;
-
- PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
- i2c_read(chip, reg, 1, &buf, 1);
- return (buf);
-}
-
-void i2c_reg_write(uchar chip, uchar reg, uchar val)
-{
- PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
- i2c_write(chip, reg, 1, &val, 1);
-}
-
#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index 8b577e1359..ec8fb9e3d7 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -78,10 +78,10 @@ void udelay_masked (unsigned long usec)
if (usec >= 1000) {
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
- tmo = usec * CFG_HZ;
+ tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000*1000);
}
@@ -109,6 +109,6 @@ unsigned long long get_ticks(void)
ulong get_tbclk (void)
{
ulong tbclk;
- tbclk = CFG_HZ;
+ tbclk = CONFIG_SYS_HZ;
return tbclk;
}
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index 121dcbe132..d735c8d485 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -234,7 +234,7 @@ mmc_read(ulong src, uchar * dst, int size)
mmc_block_size = MMC_BLOCK_SIZE;
mmc_block_address = ~(mmc_block_size - 1);
- src -= CFG_MMC_BASE;
+ src -= CONFIG_SYS_MMC_BASE;
end = src + size;
part_start = ~mmc_block_address & src;
part_end = ~mmc_block_address & end;
@@ -310,7 +310,7 @@ mmc_write(uchar * src, ulong dst, int size)
mmc_block_size = MMC_BLOCK_SIZE;
mmc_block_address = ~(mmc_block_size - 1);
- dst -= CFG_MMC_BASE;
+ dst -= CONFIG_SYS_MMC_BASE;
end = dst + size;
part_start = ~mmc_block_address & dst;
part_end = ~mmc_block_address & end;
@@ -379,7 +379,7 @@ mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst)
/****************************************************/
{
int mmc_block_size = MMC_BLOCK_SIZE;
- ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
+ ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE;
mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size);
return blkcnt;
@@ -575,8 +575,8 @@ mmc_init(int verbose)
break;
}
- /* Select 3.2-3.3 and 3.3-3.4V */
- resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0020, 0,
+ /* Select 3.2-3.3V and 3.3-3.4V */
+ resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000,
MMC_CMDAT_R3 | (retries < 2 ? 0
: MMC_CMDAT_INIT));
if (resp[0] & 0x80000000) {
@@ -652,8 +652,8 @@ int mmc_ident(block_dev_desc_t * dev)
int mmc2info(ulong addr)
{
- if (addr >= CFG_MMC_BASE
- && addr < CFG_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
+ if (addr >= CONFIG_SYS_MMC_BASE
+ && addr < CONFIG_SYS_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
return 1;
}
return 0;
diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c
index b2caa73c6c..97efcb6dfc 100644
--- a/cpu/pxa/pxafb.c
+++ b/cpu/pxa/pxafb.c
@@ -60,11 +60,11 @@ vidinfo_t panel_info = {
vl_row: 480,
vl_width: 640,
vl_height: 480,
- vl_clkp: CFG_HIGH,
- vl_oep: CFG_HIGH,
- vl_hsp: CFG_HIGH,
- vl_vsp: CFG_HIGH,
- vl_dp: CFG_HIGH,
+ vl_clkp: CONFIG_SYS_HIGH,
+ vl_oep: CONFIG_SYS_HIGH,
+ vl_hsp: CONFIG_SYS_HIGH,
+ vl_vsp: CONFIG_SYS_HIGH,
+ vl_dp: CONFIG_SYS_HIGH,
vl_bpix: LCD_BPP,
vl_lbw: 0,
vl_splt: 0,
@@ -94,11 +94,11 @@ vidinfo_t panel_info = {
vl_row: 480,
vl_width: 157,
vl_height: 118,
- vl_clkp: CFG_HIGH,
- vl_oep: CFG_HIGH,
- vl_hsp: CFG_HIGH,
- vl_vsp: CFG_HIGH,
- vl_dp: CFG_HIGH,
+ vl_clkp: CONFIG_SYS_HIGH,
+ vl_oep: CONFIG_SYS_HIGH,
+ vl_hsp: CONFIG_SYS_HIGH,
+ vl_vsp: CONFIG_SYS_HIGH,
+ vl_dp: CONFIG_SYS_HIGH,
vl_bpix: LCD_BPP,
vl_lbw: 0,
vl_splt: 1,
@@ -127,11 +127,11 @@ vidinfo_t panel_info = {
vl_row: 240,
vl_width: 167,
vl_height: 109,
- vl_clkp: CFG_HIGH,
- vl_oep: CFG_HIGH,
- vl_hsp: CFG_HIGH,
- vl_vsp: CFG_HIGH,
- vl_dp: CFG_HIGH,
+ vl_clkp: CONFIG_SYS_HIGH,
+ vl_oep: CONFIG_SYS_HIGH,
+ vl_hsp: CONFIG_SYS_HIGH,
+ vl_vsp: CONFIG_SYS_HIGH,
+ vl_dp: CONFIG_SYS_HIGH,
vl_bpix: LCD_BPP,
vl_lbw: 1,
vl_splt: 0,
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 23005e20f9..63ab0c591a 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -135,8 +135,8 @@ copy_loop:
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif /* CONFIG_USE_IRQ */
@@ -191,20 +191,20 @@ OSTIMER_BASE: .word 0x40a00000
/* Clock Manager Registers */
#ifdef CONFIG_CPU_MONAHANS
-# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
-# error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
-# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
-# define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
+# error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!"
+# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
+# define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
+# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */
#else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
CC_BASE: .word 0x41300000
#define CCCR 0x00
-cpuspeed: .word CFG_CPUSPEED
-#else /* !CFG_CPUSPEED */
-#error "You have to define CFG_CPUSPEED!!"
-#endif /* CFG_CPUSPEED */
+cpuspeed: .word CONFIG_SYS_CPUSPEED
+#else /* !CONFIG_SYS_CPUSPEED */
+#error "You have to define CONFIG_SYS_CPUSPEED!!"
+#endif /* CONFIG_SYS_CPUSPEED */
#endif /* CONFIG_CPU_MONAHANS */
/* takes care the CP15 update has taken place */
@@ -245,10 +245,10 @@ cpu_init_crit:
/* set clock speed */
#ifdef CONFIG_CPU_MONAHANS
ldr r0, =ACCR
- ldr r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
+ ldr r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
str r1, [r0]
#else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
ldr r0, CC_BASE
ldr r1, cpuspeed
str r1, [r0, #CCCR]
@@ -257,7 +257,7 @@ cpu_init_crit:
setspeed_done:
-#endif /* CFG_CPUSPEED */
+#endif /* CONFIG_SYS_CPUSPEED */
#endif /* CONFIG_CPU_MONAHANS */
/*
@@ -336,8 +336,8 @@ setspeed_done:
add r8, sp, #S_PC
ldr r2, _armboot_start
- sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+ sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
@@ -373,8 +373,8 @@ setspeed_done:
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack
- sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+ sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+ sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
str lr, [r13] @ save caller lr / spsr
mrs lr, spsr
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
index aa6f4b7b9d..bd718a6fff 100644
--- a/cpu/pxa/usb.c
+++ b/cpu/pxa/usb.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
#include <asm/arch/pxa-regs.h>
@@ -109,4 +109,4 @@ int usb_cpu_init_fail(void)
}
# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
OpenPOWER on IntegriCloud