diff options
Diffstat (limited to 'cpu/mpc824x/cpu_init.c')
| -rw-r--r-- | cpu/mpc824x/cpu_init.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c new file mode 100644 index 0000000000..602f65d30b --- /dev/null +++ b/cpu/mpc824x/cpu_init.c @@ -0,0 +1,383 @@ +/* + * (C) Copyright 2000 + * Rob Taylor. Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <mpc824x.h> + +#ifndef CFG_BANK0_ROW +#define CFG_BANK0_ROW 0 +#endif +#ifndef CFG_BANK1_ROW +#define CFG_BANK1_ROW 0 +#endif +#ifndef CFG_BANK2_ROW +#define CFG_BANK2_ROW 0 +#endif +#ifndef CFG_BANK3_ROW +#define CFG_BANK3_ROW 0 +#endif +#ifndef CFG_BANK4_ROW +#define CFG_BANK4_ROW 0 +#endif +#ifndef CFG_BANK5_ROW +#define CFG_BANK5_ROW 0 +#endif +#ifndef CFG_BANK6_ROW +#define CFG_BANK6_ROW 0 +#endif +#ifndef CFG_BANK7_ROW +#define CFG_BANK7_ROW 0 +#endif +#ifndef CFG_DBUS_SIZE2 +#define CFG_DBUS_SIZE2 0 +#endif + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + */ +void +cpu_init_f (void) +{ +/* MOUSSE board is initialized in asm */ +#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW) + register unsigned long val; + CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ +/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ + +#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62) +/* Why is this here, you ask? Try, just try setting 0x8000 + * in PCIACR with CONFIG_WRITE_HALFWORD() + * this one was a stumper, and we are annoyed + */ + +#define M_CONFIG_WRITE_HALFWORD( addr, data ) \ + __asm__ __volatile__( \ + " \ + stw %2,0(%0)\n \ + sync\n \ + sth %3,2(%1)\n \ + sync\n \ + " \ + : /* no output */ \ + : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \ + "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \ + ); + + M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000); +#endif + + CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */ + + /* + * Note that although this bit is cleared after a hard reset, it + * must be explicitly set and then cleared by software during + * initialization in order to guarantee correct operation of the + * DLL and the SDRAM_CLK[0:3] signals (if they are used). + */ + CONFIG_READ_BYTE (AMBOR, val); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); + CONFIG_WRITE_BYTE(AMBOR, val | 0x20); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); + + CONFIG_READ_WORD(PICR1, val); +#if defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) | + PIRC1_MSK | PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_EN_PCS | + PICR1_CF_APARK ); +#elif defined(CONFIG_MPC8245) + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_RCS0)) | + PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_NO_BUSW_CK | + PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */ +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + + CONFIG_READ_WORD(PICR2, val); + val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ +#ifndef CONFIG_PN62 + val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ +#endif + CONFIG_WRITE_WORD(PICR2, val); + + CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR); +#ifndef CFG_RAMBOOT + CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | + (CFG_BANK0_ROW) | + (CFG_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) | + (CFG_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) | + (CFG_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) | + (CFG_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) | + (CFG_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) | + (CFG_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) | + (CFG_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) | + (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)); +#endif + +#if defined(CFG_ASRISE) && defined(CFG_ASFALL) + CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT | + CFG_ASRISE << MCCR2_ASRISE_SHIFT | + CFG_ASFALL << MCCR2_ASFALL_SHIFT); +#else + CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT); +#endif + +#if defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD(MCCR3, + (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CFG_REFREC << MCCR3_REFREC_SHIFT) | + (CFG_RDLAT << MCCR3_RDLAT_SHIFT)); +#elif defined(CONFIG_MPC8245) + CONFIG_WRITE_WORD(MCCR3, + (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CFG_REFREC << MCCR3_REFREC_SHIFT)); +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + +/* this is gross. We think these should all be the same, and various boards + * should define CFG_ACTORW to 0 if they don't want to set it, or even, if + * its not set, we define it to zero in this file + */ +#if defined(CONFIG_CU824) || defined(CONFIG_PN62) + CONFIG_WRITE_WORD(MCCR4, + (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + MCCR4_BIT21 | + (CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) | + CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | + (CFG_ACTORW << MCCR4_ACTTORW_SHIFT) | + (((CFG_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT)); +#elif defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD(MCCR4, + (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + MCCR4_BIT21 | + (CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) | + (CFG_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) | + (((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); +#elif defined(CONFIG_MPC8245) + CONFIG_READ_WORD(MCCR1, val); + val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */ + + CONFIG_WRITE_WORD(MCCR4, + (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + (CFG_EXTROM ? MCCR4_EXTROM : 0) | + (CFG_REGDIMM ? MCCR4_REGDIMM : 0) | + (CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) | + (((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) | + (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) | + (CFG_ACTORW << MCCR4_ACTTORW_SHIFT) | + (((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + + CONFIG_WRITE_WORD(MSAR1, + ( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR1, + ( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MSAR2, + ( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR2, + ( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR1, + ( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR1, + ( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR2, + ( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR2, + ( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + + CONFIG_WRITE_BYTE(ODCR, CFG_ODCR); +#ifdef CFG_DLL_MAX_DELAY + CONFIG_WRITE_BYTE(MIOCR1, CFG_DLL_MAX_DELAY); /* needed to make DLL lock */ +#endif +#if defined(CFG_DLL_EXTEND) && defined(CFG_PCI_HOLD_DEL) + CONFIG_WRITE_BYTE(PMCR2, CFG_DLL_EXTEND | CFG_PCI_HOLD_DEL); +#endif +#if defined(MIOCR2) && defined(CFG_SDRAM_DSCD) + CONFIG_WRITE_BYTE(MIOCR2, CFG_SDRAM_DSCD); /* change memory input */ +#endif /* setup & hold time */ + + CONFIG_WRITE_BYTE(MBER, + CFG_BANK0_ENABLE | + (CFG_BANK1_ENABLE << 1) | + (CFG_BANK2_ENABLE << 2) | + (CFG_BANK3_ENABLE << 3) | + (CFG_BANK4_ENABLE << 4) | + (CFG_BANK5_ENABLE << 5) | + (CFG_BANK6_ENABLE << 6) | + (CFG_BANK7_ENABLE << 7)); + +#ifdef CFG_PGMAX + CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX); +#endif + + /* ! Wait 200us before initialize other registers */ + /*FIXME: write a decent udelay wait */ + __asm__ __volatile__( + " mtctr %0 \n \ + 0: bdnz 0b\n" + : + : "r" (0x10000)); + + CONFIG_READ_WORD(MCCR1, val); + CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ + __asm__ __volatile__("eieio"); + +#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */ +} + + +#ifdef CONFIG_MOUSSE +#ifdef INCLUDE_MPC107_REPORT +struct MPC107_s{ + unsigned int iobase; + char desc[120]; +} MPC107Regs[] ={ + {BMC_BASE+0x0, "MPC107 Vendor/Device ID"}, + {BMC_BASE+0x4, "MPC107 PCI Command/Status Register"}, + {BMC_BASE+0x8, "MPC107 Revision"}, + {BMC_BASE+0xC, "MPC107 Cache Line Size"}, + {BMC_BASE+0x10, "MPC107 LMBAR"}, + {BMC_BASE+0x14, "MPC824x PCSR"}, + {BMC_BASE+0xA8, "MPC824x PICR1"}, + {BMC_BASE+0xAC, "MPC824x PICR2"}, + {BMC_BASE+0x46, "MPC824x PACR"}, + {BMC_BASE+0x310, "MPC824x ITWR"}, + {BMC_BASE+0x300, "MPC824x OMBAR"}, + {BMC_BASE+0x308, "MPC824x OTWR"}, + {BMC_BASE+0x14, "MPC107 Peripheral Control and Status Register"}, + {BMC_BASE+0x78, "MPC107 EUMBAR"}, + {BMC_BASE+0xC0, "MPC107 Processor Bus Error Status"}, + {BMC_BASE+0xC4, "MPC107 PCI Bus Error Status"}, + {BMC_BASE+0xC8, "MPC107 Processor/PCI Error Address"}, + {BMC_BASE+0xE0, "MPC107 AMBOR Register"}, + {BMC_BASE+0xF0, "MPC107 MCCR1 Register"}, + {BMC_BASE+0xF4, "MPC107 MCCR2 Register"}, + {BMC_BASE+0xF8, "MPC107 MCCR3 Register"}, + {BMC_BASE+0xFC, "MPC107 MCCR4 Register"} +}; +#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0])) +#endif /* INCLUDE_MPC107_REPORT */ +#endif /* CONFIG_MOUSSE */ + +/* + * initialize higher level parts of CPU like time base and timers + */ +int cpu_init_r (void) +{ +#ifdef CONFIG_MOUSSE +#ifdef INCLUDE_MPC107_REPORT + unsigned int tmp = 0, i; +#endif + /* + * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg). + * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can + * be accessed. + */ + +#ifdef CONFIG_MPC8240 /* only on MPC8240 */ + mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL); + /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */ + mpc824x_mpc107_setreg (AMBOR, 0x000000C0); +#endif + + +#ifdef INCLUDE_MPC107_REPORT + /* Check MPC824x PCI Device and Vendor ID */ + while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) { + printf (" MPC107: offset=0x%x, val = 0x%x\n", + BMC_BASE, + tmp); + } + + for (i = 0; i < N_MPC107_Regs; i++) { + printf (" 0x%x/%s = 0x%x\n", + MPC107Regs[i].iobase, + MPC107Regs[i].desc, + mpc824x_mpc107_getreg (MPC107Regs[i].iobase)); + } + + printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L)); + printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U)); + printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L)); + printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U)); + printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L)); + printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U)); + printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L)); + printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U)); + printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L)); + printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U)); + printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L)); + printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U)); + printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L)); + printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U)); + printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L)); + printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U)); +#endif /* INCLUDE_MPC107_REPORT */ +#endif /* CONFIG_MOUSSE */ + return (0); +} |
