summaryrefslogtreecommitdiffstats
path: root/common/cmd_ide.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cmd_ide.c')
-rw-r--r--common/cmd_ide.c156
1 files changed, 78 insertions, 78 deletions
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 2fcaff8c5a..2564c2b757 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -92,10 +92,10 @@ const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
-#ifndef CFG_PIO_MODE
-#define CFG_PIO_MODE 0 /* use a relaxed default */
+#ifndef CONFIG_SYS_PIO_MODE
+#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
#endif
-static int pio_mode = CFG_PIO_MODE;
+static int pio_mode = CONFIG_SYS_PIO_MODE;
/* Make clock cycles and always round up */
@@ -109,23 +109,23 @@ static int pio_mode = CFG_PIO_MODE;
static int curr_device = -1;
/* Current offset for IDE0 / IDE1 bus access */
-ulong ide_bus_offset[CFG_IDE_MAXBUS] = {
-#if defined(CFG_ATA_IDE0_OFFSET)
- CFG_ATA_IDE0_OFFSET,
+ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS] = {
+#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
+ CONFIG_SYS_ATA_IDE0_OFFSET,
#endif
-#if defined(CFG_ATA_IDE1_OFFSET) && (CFG_IDE_MAXBUS > 1)
- CFG_ATA_IDE1_OFFSET,
+#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) && (CONFIG_SYS_IDE_MAXBUS > 1)
+ CONFIG_SYS_ATA_IDE1_OFFSET,
#endif
};
#ifndef CONFIG_AMIGAONEG3SE
-static int ide_bus_ok[CFG_IDE_MAXBUS];
+static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS];
#else
-static int ide_bus_ok[CFG_IDE_MAXBUS] = {0,};
+static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS] = {0,};
#endif
-block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
+block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
@@ -165,8 +165,8 @@ static void input_data(int dev, ulong *sect_buf, int words);
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
-#ifndef CFG_ATA_PORT_ADDR
-#define CFG_ATA_PORT_ADDR(port) (port)
+#ifndef CONFIG_SYS_ATA_PORT_ADDR
+#define CONFIG_SYS_ATA_PORT_ADDR(port) (port)
#endif
#ifdef CONFIG_ATAPI
@@ -205,7 +205,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
putc ('\n');
- for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
+ for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i) {
if (ide_dev_desc[i].type==DEV_TYPE_UNKNOWN)
continue; /* list only known devices */
printf ("IDE device %d: ", i);
@@ -214,7 +214,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
} else if (strncmp(argv[1],"dev",3) == 0) {
- if ((curr_device < 0) || (curr_device >= CFG_IDE_MAXDEVICE)) {
+ if ((curr_device < 0) || (curr_device >= CONFIG_SYS_IDE_MAXDEVICE)) {
puts ("\nno IDE devices available\n");
return 1;
}
@@ -224,7 +224,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} else if (strncmp(argv[1],"part",4) == 0) {
int dev, ok;
- for (ok=0, dev=0; dev<CFG_IDE_MAXDEVICE; ++dev) {
+ for (ok=0, dev=0; dev<CONFIG_SYS_IDE_MAXDEVICE; ++dev) {
if (ide_dev_desc[dev].part_type!=PART_TYPE_UNKNOWN) {
++ok;
if (dev)
@@ -245,7 +245,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nIDE device %d: ", dev);
- if (dev >= CFG_IDE_MAXDEVICE) {
+ if (dev >= CONFIG_SYS_IDE_MAXDEVICE) {
puts ("unknown device\n");
return 1;
}
@@ -296,7 +296,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
@@ -325,7 +325,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
@@ -371,7 +371,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
show_boot_progress (41);
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
+ addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv ("bootdevice");
break;
case 2:
@@ -525,8 +525,8 @@ void inline
__ide_outb(int dev, int port, unsigned char val)
{
debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
- dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
- outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
+ outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
}
void inline ide_outb (int dev, int port, unsigned char val)
__attribute__((weak, alias("__ide_outb")));
@@ -535,9 +535,9 @@ unsigned char inline
__ide_inb(int dev, int port)
{
uchar val;
- val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
- dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+ dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val);
return val;
}
unsigned char inline ide_inb(int dev, int port)
@@ -557,7 +557,7 @@ void ide_init (void)
{
#ifdef CONFIG_IDE_8xx_DIRECT
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
#endif
unsigned char c;
@@ -639,17 +639,17 @@ void ide_init (void)
* According to spec, this can take up to 31 seconds!
*/
#ifndef CONFIG_AMIGAONEG3SE
- for (bus=0; bus<CFG_IDE_MAXBUS; ++bus) {
- int dev = bus * (CFG_IDE_MAXDEVICE / CFG_IDE_MAXBUS);
+ for (bus=0; bus<CONFIG_SYS_IDE_MAXBUS; ++bus) {
+ int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS);
#else
s = getenv("ide_maxbus");
if (s)
max_bus_scan = simple_strtol(s, NULL, 10);
else
- max_bus_scan = CFG_IDE_MAXBUS;
+ max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
for (bus=0; bus<max_bus_scan; ++bus) {
- int dev = bus * (CFG_IDE_MAXDEVICE / max_bus_scan);
+ int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / max_bus_scan);
#endif
#ifdef CONFIG_IDE_8xx_PCCARD
@@ -722,7 +722,7 @@ void ide_init (void)
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
curr_device = -1;
- for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
+ for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i) {
#ifdef CONFIG_IDE_LED
int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
#endif
@@ -753,7 +753,7 @@ void ide_init (void)
block_dev_desc_t * ide_get_dev(int dev)
{
- return (dev < CFG_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
+ return (dev < CONFIG_SYS_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
}
@@ -762,7 +762,7 @@ block_dev_desc_t * ide_get_dev(int dev)
static void
set_pcmcia_timing (int pmode)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
ulong timings;
@@ -775,33 +775,33 @@ set_pcmcia_timing (int pmode)
/* IDE 0
*/
- pcmp->pcmc_pbr0 = CFG_PCMCIA_PBR0;
- pcmp->pcmc_por0 = CFG_PCMCIA_POR0
-#if (CFG_PCMCIA_POR0 != 0)
+ pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
+ pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0
+#if (CONFIG_SYS_PCMCIA_POR0 != 0)
| timings
#endif
;
debug ("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
- pcmp->pcmc_pbr1 = CFG_PCMCIA_PBR1;
- pcmp->pcmc_por1 = CFG_PCMCIA_POR1
-#if (CFG_PCMCIA_POR1 != 0)
+ pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
+ pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1
+#if (CONFIG_SYS_PCMCIA_POR1 != 0)
| timings
#endif
;
debug ("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
- pcmp->pcmc_pbr2 = CFG_PCMCIA_PBR2;
- pcmp->pcmc_por2 = CFG_PCMCIA_POR2
-#if (CFG_PCMCIA_POR2 != 0)
+ pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
+ pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2
+#if (CONFIG_SYS_PCMCIA_POR2 != 0)
| timings
#endif
;
debug ("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
- pcmp->pcmc_pbr3 = CFG_PCMCIA_PBR3;
- pcmp->pcmc_por3 = CFG_PCMCIA_POR3
-#if (CFG_PCMCIA_POR3 != 0)
+ pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
+ pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3
+#if (CONFIG_SYS_PCMCIA_POR3 != 0)
| timings
#endif
;
@@ -809,33 +809,33 @@ set_pcmcia_timing (int pmode)
/* IDE 1
*/
- pcmp->pcmc_pbr4 = CFG_PCMCIA_PBR4;
- pcmp->pcmc_por4 = CFG_PCMCIA_POR4
-#if (CFG_PCMCIA_POR4 != 0)
+ pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
+ pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4
+#if (CONFIG_SYS_PCMCIA_POR4 != 0)
| timings
#endif
;
debug ("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
- pcmp->pcmc_pbr5 = CFG_PCMCIA_PBR5;
- pcmp->pcmc_por5 = CFG_PCMCIA_POR5
-#if (CFG_PCMCIA_POR5 != 0)
+ pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
+ pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5
+#if (CONFIG_SYS_PCMCIA_POR5 != 0)
| timings
#endif
;
debug ("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
- pcmp->pcmc_pbr6 = CFG_PCMCIA_PBR6;
- pcmp->pcmc_por6 = CFG_PCMCIA_POR6
-#if (CFG_PCMCIA_POR6 != 0)
+ pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
+ pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6
+#if (CONFIG_SYS_PCMCIA_POR6 != 0)
| timings
#endif
;
debug ("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
- pcmp->pcmc_pbr7 = CFG_PCMCIA_PBR7;
- pcmp->pcmc_por7 = CFG_PCMCIA_POR7
-#if (CFG_PCMCIA_POR7 != 0)
+ pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
+ pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7
+#if (CONFIG_SYS_PCMCIA_POR7 != 0)
| timings
#endif
;
@@ -1079,7 +1079,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
if (s) {
max_bus_scan = simple_strtol(s, NULL, 10);
} else {
- max_bus_scan = CFG_IDE_MAXBUS;
+ max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
}
if (device >= max_bus_scan*2) {
dev_desc->type=DEV_TYPE_UNKNOWN;
@@ -1359,7 +1359,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
#else
@@ -1397,7 +1397,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
}
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
@@ -1454,7 +1454,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
#else
@@ -1487,7 +1487,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
@@ -1567,15 +1567,15 @@ extern void ide_set_reset(int idereset);
static void ide_reset (void)
{
-#if defined(CFG_PB_12V_ENABLE) || defined(CFG_PB_IDE_MOTOR)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR)
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
#endif
int i;
curr_device = -1;
- for (i=0; i<CFG_IDE_MAXBUS; ++i)
+ for (i=0; i<CONFIG_SYS_IDE_MAXBUS; ++i)
ide_bus_ok[i] = 0;
- for (i=0; i<CFG_IDE_MAXDEVICE; ++i)
+ for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i)
ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
ide_set_reset (1); /* assert reset */
@@ -1585,11 +1585,11 @@ static void ide_reset (void)
WATCHDOG_RESET();
-#ifdef CFG_PB_12V_ENABLE
- immr->im_cpm.cp_pbdat &= ~(CFG_PB_12V_ENABLE); /* 12V Enable output OFF */
- immr->im_cpm.cp_pbpar &= ~(CFG_PB_12V_ENABLE);
- immr->im_cpm.cp_pbodr &= ~(CFG_PB_12V_ENABLE);
- immr->im_cpm.cp_pbdir |= CFG_PB_12V_ENABLE;
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+ immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE); /* 12V Enable output OFF */
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
+ immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
/* wait 500 ms for the voltage to stabilize
*/
@@ -1597,19 +1597,19 @@ static void ide_reset (void)
udelay (1000);
}
- immr->im_cpm.cp_pbdat |= CFG_PB_12V_ENABLE; /* 12V Enable output ON */
-#endif /* CFG_PB_12V_ENABLE */
+ immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE; /* 12V Enable output ON */
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
-#ifdef CFG_PB_IDE_MOTOR
+#ifdef CONFIG_SYS_PB_IDE_MOTOR
/* configure IDE Motor voltage monitor pin as input */
- immr->im_cpm.cp_pbpar &= ~(CFG_PB_IDE_MOTOR);
- immr->im_cpm.cp_pbodr &= ~(CFG_PB_IDE_MOTOR);
- immr->im_cpm.cp_pbdir &= ~(CFG_PB_IDE_MOTOR);
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+ immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
/* wait up to 1 s for the motor voltage to stabilize
*/
for (i=0; i<1000; ++i) {
- if ((immr->im_cpm.cp_pbdat & CFG_PB_IDE_MOTOR) != 0) {
+ if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) {
break;
}
udelay (1000);
@@ -1626,7 +1626,7 @@ static void ide_reset (void)
# endif
# endif /* CONFIG_STATUS_LED */
}
-#endif /* CFG_PB_IDE_MOTOR */
+#endif /* CONFIG_SYS_PB_IDE_MOTOR */
WATCHDOG_RESET();
OpenPOWER on IntegriCloud