diff options
Diffstat (limited to 'cmd')
| -rw-r--r-- | cmd/Makefile | 8 | ||||
| -rw-r--r-- | cmd/disk.c | 2 | ||||
| -rw-r--r-- | cmd/ide.c | 1352 | ||||
| -rw-r--r-- | cmd/mmc.c | 18 | ||||
| -rw-r--r-- | cmd/sata.c | 142 | ||||
| -rw-r--r-- | cmd/scsi.c | 753 | ||||
| -rw-r--r-- | cmd/usb.c | 16 |
7 files changed, 156 insertions, 2135 deletions
diff --git a/cmd/Makefile b/cmd/Makefile index f95759e670..e3e0c74ffc 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -112,7 +112,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o obj-$(CONFIG_SANDBOX) += host.o obj-$(CONFIG_CMD_SATA) += sata.o obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_CMD_SCSI) += scsi.o +obj-$(CONFIG_SCSI) += scsi.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o @@ -155,12 +155,6 @@ obj-$(CONFIG_CMD_PMIC) += pmic.o obj-$(CONFIG_CMD_REGULATOR) += regulator.o endif # !CONFIG_SPL_BUILD -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_SATA_SUPPORT -obj-$(CONFIG_CMD_SCSI) += scsi.o -endif -endif # CONFIG_SPL_BUILD - obj-$(CONFIG_CMD_BLOB) += blob.o # core command diff --git a/cmd/disk.c b/cmd/disk.c index 2fd1717e6a..fcc4123127 100644 --- a/cmd/disk.c +++ b/cmd/disk.c @@ -8,7 +8,7 @@ #include <command.h> #include <part.h> -#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \ +#if defined(CONFIG_CMD_IDE) || defined(CONFIG_SCSI) || \ defined(CONFIG_USB_STORAGE) int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, char *const argv[]) @@ -29,64 +29,9 @@ # include <status_led.h> #endif -#ifdef __PPC__ -# define EIEIO __asm__ volatile ("eieio") -# define SYNC __asm__ volatile ("sync") -#else -# define EIEIO /* nothing */ -# define SYNC /* nothing */ -#endif - -/* ------------------------------------------------------------------------- */ - /* Current I/O Device */ static int curr_device = -1; -/* Current offset for IDE0 / IDE1 bus access */ -ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS] = { -#if defined(CONFIG_SYS_ATA_IDE0_OFFSET) - CONFIG_SYS_ATA_IDE0_OFFSET, -#endif -#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) && (CONFIG_SYS_IDE_MAXBUS > 1) - CONFIG_SYS_ATA_IDE1_OFFSET, -#endif -}; - -static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS]; - -struct blk_desc ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_IDE_RESET -static void ide_reset (void); -#else -#define ide_reset() /* dummy */ -#endif - -static void ide_ident(struct blk_desc *dev_desc); -static uchar ide_wait (int dev, ulong t); - -#define IDE_TIME_OUT 2000 /* 2 sec timeout */ - -#define ATAPI_TIME_OUT 7000 /* 7 sec timeout (5 sec seems to work...) */ - -#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ - -static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); - -#ifndef CONFIG_SYS_ATA_PORT_ADDR -#define CONFIG_SYS_ATA_PORT_ADDR(port) (port) -#endif - -#ifdef CONFIG_ATAPI -static void atapi_inquiry(struct blk_desc *dev_desc); -static ulong atapi_read(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, void *buffer); -#endif - - -/* ------------------------------------------------------------------------- */ - int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { int rcode = 0; @@ -106,79 +51,41 @@ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) ide_init(); return 0; } else if (strncmp(argv[1], "inf", 3) == 0) { - int i; - - putc('\n'); - - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) { - if (ide_dev_desc[i].type == DEV_TYPE_UNKNOWN) - continue; /* list only known devices */ - printf("IDE device %d: ", i); - dev_print(&ide_dev_desc[i]); - } + blk_list_devices(IF_TYPE_IDE); return 0; } else if (strncmp(argv[1], "dev", 3) == 0) { - if ((curr_device < 0) - || (curr_device >= CONFIG_SYS_IDE_MAXDEVICE)) { - puts("\nno IDE devices available\n"); - return 1; + if (blk_print_device_num(IF_TYPE_IDE, curr_device)) { + printf("\nno IDE devices available\n"); + return CMD_RET_FAILURE; } - printf("\nIDE device %d: ", curr_device); - dev_print(&ide_dev_desc[curr_device]); + return 0; } else if (strncmp(argv[1], "part", 4) == 0) { - int dev, ok; - - for (ok = 0, dev = 0; - dev < CONFIG_SYS_IDE_MAXDEVICE; - ++dev) { - if (ide_dev_desc[dev].part_type != - PART_TYPE_UNKNOWN) { - ++ok; - if (dev) - putc('\n'); - part_print(&ide_dev_desc[dev]); - } - } - if (!ok) { - puts("\nno IDE devices available\n"); - rcode++; - } - return rcode; + if (blk_list_part(IF_TYPE_IDE)) + printf("\nno IDE devices available\n"); + return 1; } return CMD_RET_USAGE; case 3: if (strncmp(argv[1], "dev", 3) == 0) { - int dev = (int) simple_strtoul(argv[2], NULL, 10); + int dev = (int)simple_strtoul(argv[2], NULL, 10); - printf("\nIDE device %d: ", dev); - if (dev >= CONFIG_SYS_IDE_MAXDEVICE) { - puts("unknown device\n"); - return 1; + if (!blk_show_device(IF_TYPE_IDE, dev)) { + curr_device = dev; + printf("... is now current device\n"); + } else { + return CMD_RET_FAILURE; } - dev_print(&ide_dev_desc[dev]); - /*ide_print (dev); */ - - if (ide_dev_desc[dev].type == DEV_TYPE_UNKNOWN) - return 1; - - curr_device = dev; - - puts("... is now current device\n"); - return 0; } else if (strncmp(argv[1], "part", 4) == 0) { - int dev = (int) simple_strtoul(argv[2], NULL, 10); + int dev = (int)simple_strtoul(argv[2], NULL, 10); - if (ide_dev_desc[dev].part_type != PART_TYPE_UNKNOWN) { - part_print(&ide_dev_desc[dev]); - } else { - printf("\nIDE device %d not available\n", - dev); - rcode = 1; + if (blk_print_part_devnum(IF_TYPE_IDE, dev)) { + printf("\nIDE device %d not available\n", dev); + return CMD_RET_FAILURE; } - return rcode; + return 1; } return CMD_RET_USAGE; @@ -188,26 +95,22 @@ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) if (strcmp(argv[1], "read") == 0) { ulong addr = simple_strtoul(argv[2], NULL, 16); ulong cnt = simple_strtoul(argv[4], NULL, 16); - struct blk_desc *dev_desc; ulong n; #ifdef CONFIG_SYS_64BIT_LBA lbaint_t blk = simple_strtoull(argv[3], NULL, 16); - printf("\nIDE read: device %d block # %lld, count %ld ... ", - curr_device, blk, cnt); + printf("\nIDE read: device %d block # %lld, count %ld...", + curr_device, blk, cnt); #else lbaint_t blk = simple_strtoul(argv[3], NULL, 16); - printf("\nIDE read: device %d block # %ld, count %ld ... ", - curr_device, blk, cnt); + printf("\nIDE read: device %d block # %ld, count %ld...", + curr_device, blk, cnt); #endif - dev_desc = &ide_dev_desc[curr_device]; - n = blk_dread(dev_desc, blk, cnt, (ulong *)addr); - /* flush cache after read */ - flush_cache(addr, - cnt * ide_dev_desc[curr_device].blksz); + n = blk_read_devnum(IF_TYPE_IDE, curr_device, blk, cnt, + (ulong *)addr); printf("%ld blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR"); @@ -223,19 +126,19 @@ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) #ifdef CONFIG_SYS_64BIT_LBA lbaint_t blk = simple_strtoull(argv[3], NULL, 16); - printf("\nIDE write: device %d block # %lld, count %ld ... ", - curr_device, blk, cnt); + printf("\nIDE write: device %d block # %lld, count %ld...", + curr_device, blk, cnt); #else lbaint_t blk = simple_strtoul(argv[3], NULL, 16); - printf("\nIDE write: device %d block # %ld, count %ld ... ", - curr_device, blk, cnt); + printf("\nIDE write: device %d block # %ld, count %ld...", + curr_device, blk, cnt); #endif - n = ide_write(&ide_dev_desc[curr_device], blk, cnt, - (ulong *)addr); + n = blk_write_devnum(IF_TYPE_IDE, curr_device, blk, cnt, + (ulong *)addr); - printf("%ld blocks written: %s\n", - n, (n == cnt) ? "OK" : "ERROR"); + printf("%ld blocks written: %s\n", n, + n == cnt ? "OK" : "ERROR"); if (n == cnt) return 0; else @@ -253,1195 +156,6 @@ int do_diskboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) return common_diskboot(cmdtp, "ide", argc, argv); } -/* ------------------------------------------------------------------------- */ - -__weak void ide_led(uchar led, uchar status) -{ -#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */ - static uchar led_buffer; /* Buffer for current LED status */ - - uchar *led_port = LED_PORT; - - if (status) /* switch LED on */ - led_buffer |= led; - else /* switch LED off */ - led_buffer &= ~led; - - *led_port = led_buffer; -#endif -} - -#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */ -# define DEVICE_LED(x) 0 -# define LED_IDE1 1 -# define LED_IDE2 2 -#endif - -/* ------------------------------------------------------------------------- */ - -__weak void ide_outb(int dev, int port, unsigned char val) -{ - debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", - dev, port, val, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); - -#if defined(CONFIG_IDE_AHB) - if (port) { - /* write command */ - ide_write_register(dev, port, val); - } else { - /* write data */ - outb(val, (ATA_CURR_BASE(dev))); - } -#else - outb(val, (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); -#endif -} - -__weak unsigned char ide_inb(int dev, int port) -{ - uchar val; - -#if defined(CONFIG_IDE_AHB) - val = ide_read_register(dev, port); -#else - val = inb((ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); -#endif - - debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", - dev, port, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)), val); - return val; -} - -void ide_init(void) -{ - unsigned char c; - int i, bus; - -#ifdef CONFIG_IDE_8xx_PCCARD - extern int ide_devices_found; /* Initialized in check_ide_device() */ -#endif /* CONFIG_IDE_8xx_PCCARD */ - -#ifdef CONFIG_IDE_PREINIT - WATCHDOG_RESET(); - - if (ide_preinit()) { - puts("ide_preinit failed\n"); - return; - } -#endif /* CONFIG_IDE_PREINIT */ - - WATCHDOG_RESET(); - - /* - * Reset the IDE just to be sure. - * Light LED's to show - */ - ide_led((LED_IDE1 | LED_IDE2), 1); /* LED's on */ - - /* ATAPI Drives seems to need a proper IDE Reset */ - ide_reset(); - -#ifdef CONFIG_IDE_INIT_POSTRESET - WATCHDOG_RESET(); - - if (ide_init_postreset()) { - puts("ide_preinit_postreset failed\n"); - return; - } -#endif /* CONFIG_IDE_INIT_POSTRESET */ - - /* - * Wait for IDE to get ready. - * According to spec, this can take up to 31 seconds! - */ - for (bus = 0; bus < CONFIG_SYS_IDE_MAXBUS; ++bus) { - int dev = - bus * (CONFIG_SYS_IDE_MAXDEVICE / - CONFIG_SYS_IDE_MAXBUS); - -#ifdef CONFIG_IDE_8xx_PCCARD - /* Skip non-ide devices from probing */ - if ((ide_devices_found & (1 << bus)) == 0) { - ide_led((LED_IDE1 | LED_IDE2), 0); /* LED's off */ - continue; - } -#endif - printf("Bus %d: ", bus); - - ide_bus_ok[bus] = 0; - - /* Select device - */ - udelay(100000); /* 100 ms */ - ide_outb(dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev)); - udelay(100000); /* 100 ms */ - i = 0; - do { - udelay(10000); /* 10 ms */ - - c = ide_inb(dev, ATA_STATUS); - i++; - if (i > (ATA_RESET_TIME * 100)) { - puts("** Timeout **\n"); - /* LED's off */ - ide_led((LED_IDE1 | LED_IDE2), 0); - return; - } - if ((i >= 100) && ((i % 100) == 0)) - putc('.'); - - } while (c & ATA_STAT_BUSY); - - if (c & (ATA_STAT_BUSY | ATA_STAT_FAULT)) { - puts("not available "); - debug("Status = 0x%02X ", c); -#ifndef CONFIG_ATAPI /* ATAPI Devices do not set DRDY */ - } else if ((c & ATA_STAT_READY) == 0) { - puts("not available "); - debug("Status = 0x%02X ", c); -#endif - } else { - puts("OK "); - ide_bus_ok[bus] = 1; - } - WATCHDOG_RESET(); - } - - putc('\n'); - - ide_led((LED_IDE1 | LED_IDE2), 0); /* LED's off */ - - curr_device = -1; - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) { - int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2; - ide_dev_desc[i].type = DEV_TYPE_UNKNOWN; - ide_dev_desc[i].if_type = IF_TYPE_IDE; - ide_dev_desc[i].devnum = i; - ide_dev_desc[i].part_type = PART_TYPE_UNKNOWN; - ide_dev_desc[i].blksz = 0; - ide_dev_desc[i].log2blksz = - LOG2_INVALID(typeof(ide_dev_desc[i].log2blksz)); - ide_dev_desc[i].lba = 0; - ide_dev_desc[i].block_read = ide_read; - ide_dev_desc[i].block_write = ide_write; - if (!ide_bus_ok[IDE_BUS(i)]) - continue; - ide_led(led, 1); /* LED on */ - ide_ident(&ide_dev_desc[i]); - ide_led(led, 0); /* LED off */ - dev_print(&ide_dev_desc[i]); - - if ((ide_dev_desc[i].lba > 0) && (ide_dev_desc[i].blksz > 0)) { - /* initialize partition type */ - part_init(&ide_dev_desc[i]); - if (curr_device < 0) - curr_device = i; - } - } - WATCHDOG_RESET(); -} - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_PARTITIONS -struct blk_desc *ide_get_dev(int dev) -{ - return (dev < CONFIG_SYS_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL; -} -#endif - -/* ------------------------------------------------------------------------- */ - -/* We only need to swap data if we are running on a big endian cpu. */ -#if defined(__LITTLE_ENDIAN) -__weak void ide_input_swap_data(int dev, ulong *sect_buf, int words) -{ - ide_input_data(dev, sect_buf, words); -} -#else -__weak void ide_input_swap_data(int dev, ulong *sect_buf, int words) -{ - volatile ushort *pbuf = - (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); - ushort *dbuf = (ushort *) sect_buf; - - debug("in input swap data base for read is %lx\n", - (unsigned long) pbuf); - - while (words--) { -#ifdef __MIPS__ - *dbuf++ = swab16p((u16 *) pbuf); - *dbuf++ = swab16p((u16 *) pbuf); -#else - *dbuf++ = ld_le16(pbuf); - *dbuf++ = ld_le16(pbuf); -#endif /* !MIPS */ - } -} -#endif /* __LITTLE_ENDIAN */ - - -#if defined(CONFIG_IDE_SWAP_IO) -__weak void ide_output_data(int dev, const ulong *sect_buf, int words) -{ - ushort *dbuf; - volatile ushort *pbuf; - - pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); - dbuf = (ushort *) sect_buf; - while (words--) { - EIEIO; - *pbuf = *dbuf++; - EIEIO; - *pbuf = *dbuf++; - } -} -#else /* ! CONFIG_IDE_SWAP_IO */ -__weak void ide_output_data(int dev, const ulong *sect_buf, int words) -{ -#if defined(CONFIG_IDE_AHB) - ide_write_data(dev, sect_buf, words); -#else - outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, words << 1); -#endif -} -#endif /* CONFIG_IDE_SWAP_IO */ - -#if defined(CONFIG_IDE_SWAP_IO) -__weak void ide_input_data(int dev, ulong *sect_buf, int words) -{ - ushort *dbuf; - volatile ushort *pbuf; - - pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); - dbuf = (ushort *) sect_buf; - - debug("in input data base for read is %lx\n", (unsigned long) pbuf); - - while (words--) { - EIEIO; - *dbuf++ = *pbuf; - EIEIO; - *dbuf++ = *pbuf; - } -} -#else /* ! CONFIG_IDE_SWAP_IO */ -__weak void ide_input_data(int dev, ulong *sect_buf, int words) -{ -#if defined(CONFIG_IDE_AHB) - ide_read_data(dev, sect_buf, words); -#else - insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, words << 1); -#endif -} - -#endif /* CONFIG_IDE_SWAP_IO */ - -/* ------------------------------------------------------------------------- - */ -static void ide_ident(struct blk_desc *dev_desc) -{ - unsigned char c; - hd_driveid_t iop; - -#ifdef CONFIG_ATAPI - int retries = 0; -#endif - int device; - - device = dev_desc->devnum; - printf(" Device %d: ", device); - - ide_led(DEVICE_LED(device), 1); /* LED on */ - /* Select device - */ - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - dev_desc->if_type = IF_TYPE_IDE; -#ifdef CONFIG_ATAPI - - retries = 0; - - /* Warning: This will be tricky to read */ - while (retries <= 1) { - /* check signature */ - if ((ide_inb(device, ATA_SECT_CNT) == 0x01) && - (ide_inb(device, ATA_SECT_NUM) == 0x01) && - (ide_inb(device, ATA_CYL_LOW) == 0x14) && - (ide_inb(device, ATA_CYL_HIGH) == 0xEB)) { - /* ATAPI Signature found */ - dev_desc->if_type = IF_TYPE_ATAPI; - /* - * Start Ident Command - */ - ide_outb(device, ATA_COMMAND, ATAPI_CMD_IDENT); - /* - * Wait for completion - ATAPI devices need more time - * to become ready - */ - c = ide_wait(device, ATAPI_TIME_OUT); - } else -#endif - { - /* - * Start Ident Command - */ - ide_outb(device, ATA_COMMAND, ATA_CMD_IDENT); - - /* - * Wait for completion - */ - c = ide_wait(device, IDE_TIME_OUT); - } - ide_led(DEVICE_LED(device), 0); /* LED off */ - - if (((c & ATA_STAT_DRQ) == 0) || - ((c & (ATA_STAT_FAULT | ATA_STAT_ERR)) != 0)) { -#ifdef CONFIG_ATAPI - { - /* - * Need to soft reset the device - * in case it's an ATAPI... - */ - debug("Retrying...\n"); - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - udelay(100000); - ide_outb(device, ATA_COMMAND, 0x08); - udelay(500000); /* 500 ms */ - } - /* - * Select device - */ - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - retries++; -#else - return; -#endif - } -#ifdef CONFIG_ATAPI - else - break; - } /* see above - ugly to read */ - - if (retries == 2) /* Not found */ - return; -#endif - - ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS); - - ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev, - sizeof(dev_desc->revision)); - ident_cpy((unsigned char *) dev_desc->vendor, iop.model, - sizeof(dev_desc->vendor)); - ident_cpy((unsigned char *) dev_desc->product, iop.serial_no, - sizeof(dev_desc->product)); -#ifdef __LITTLE_ENDIAN - /* - * firmware revision, model, and serial number have Big Endian Byte - * order in Word. Convert all three to little endian. - * - * See CF+ and CompactFlash Specification Revision 2.0: - * 6.2.1.6: Identify Drive, Table 39 for more details - */ - - strswab(dev_desc->revision); - strswab(dev_desc->vendor); - strswab(dev_desc->product); -#endif /* __LITTLE_ENDIAN */ - - if ((iop.config & 0x0080) == 0x0080) - dev_desc->removable = 1; - else - dev_desc->removable = 0; - -#ifdef CONFIG_ATAPI - if (dev_desc->if_type == IF_TYPE_ATAPI) { - atapi_inquiry(dev_desc); - return; - } -#endif /* CONFIG_ATAPI */ - -#ifdef __BIG_ENDIAN - /* swap shorts */ - dev_desc->lba = (iop.lba_capacity << 16) | (iop.lba_capacity >> 16); -#else /* ! __BIG_ENDIAN */ - /* - * do not swap shorts on little endian - * - * See CF+ and CompactFlash Specification Revision 2.0: - * 6.2.1.6: Identfy Drive, Table 39, Word Address 57-58 for details. - */ - dev_desc->lba = iop.lba_capacity; -#endif /* __BIG_ENDIAN */ - -#ifdef CONFIG_LBA48 - if (iop.command_set_2 & 0x0400) { /* LBA 48 support */ - dev_desc->lba48 = 1; - dev_desc->lba = (unsigned long long) iop.lba48_capacity[0] | - ((unsigned long long) iop.lba48_capacity[1] << 16) | - ((unsigned long long) iop.lba48_capacity[2] << 32) | - ((unsigned long long) iop.lba48_capacity[3] << 48); - } else { - dev_desc->lba48 = 0; - } -#endif /* CONFIG_LBA48 */ - /* assuming HD */ - dev_desc->type = DEV_TYPE_HARDDISK; - dev_desc->blksz = ATA_BLOCKSIZE; - dev_desc->log2blksz = LOG2(dev_desc->blksz); - dev_desc->lun = 0; /* just to fill something in... */ - -#if 0 /* only used to test the powersaving mode, - * if enabled, the drive goes after 5 sec - * in standby mode */ - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - c = ide_wait(device, IDE_TIME_OUT); - ide_outb(device, ATA_SECT_CNT, 1); - ide_outb(device, ATA_LBA_LOW, 0); - ide_outb(device, ATA_LBA_MID, 0); - ide_outb(device, ATA_LBA_HIGH, 0); - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - ide_outb(device, ATA_COMMAND, 0xe3); - udelay(50); - c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */ -#endif -} - - -/* ------------------------------------------------------------------------- */ - -ulong ide_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt, - void *buffer) -{ - int device = block_dev->devnum; - ulong n = 0; - unsigned char c; - unsigned char pwrsave = 0; /* power save */ - -#ifdef CONFIG_LBA48 - unsigned char lba48 = 0; - - if (blknr & 0x0000fffff0000000ULL) { - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n", - device, blknr, blkcnt, (ulong) buffer); - - ide_led(DEVICE_LED(device), 1); /* LED on */ - - /* Select device - */ - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - c = ide_wait(device, IDE_TIME_OUT); - - if (c & ATA_STAT_BUSY) { - printf("IDE read: device %d not ready\n", device); - goto IDE_READ_E; - } - - /* first check if the drive is in Powersaving mode, if yes, - * increase the timeout value */ - ide_outb(device, ATA_COMMAND, ATA_CMD_CHK_PWR); - udelay(50); - - c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */ - - if (c & ATA_STAT_BUSY) { - printf("IDE read: device %d not ready\n", device); - goto IDE_READ_E; - } - if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) { - printf("No Powersaving mode %X\n", c); - } else { - c = ide_inb(device, ATA_SECT_CNT); - debug("Powersaving %02X\n", c); - if (c == 0) - pwrsave = 1; - } - - - while (blkcnt-- > 0) { - - c = ide_wait(device, IDE_TIME_OUT); - - if (c & ATA_STAT_BUSY) { - printf("IDE read: device %d not ready\n", device); - break; - } -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - ide_outb(device, ATA_SECT_CNT, 0); - ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF); -#ifdef CONFIG_SYS_64BIT_LBA - ide_outb(device, ATA_LBA_MID, (blknr >> 32) & 0xFF); - ide_outb(device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF); -#else - ide_outb(device, ATA_LBA_MID, 0); - ide_outb(device, ATA_LBA_HIGH, 0); -#endif - } -#endif - ide_outb(device, ATA_SECT_CNT, 1); - ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF); - ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF); - ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF); - -#ifdef CONFIG_LBA48 - if (lba48) { - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - ide_outb(device, ATA_COMMAND, ATA_CMD_READ_EXT); - - } else -#endif - { - ide_outb(device, ATA_DEV_HD, ATA_LBA | - ATA_DEVICE(device) | ((blknr >> 24) & 0xF)); - ide_outb(device, ATA_COMMAND, ATA_CMD_READ); - } - - udelay(50); - - if (pwrsave) { - /* may take up to 4 sec */ - c = ide_wait(device, IDE_SPIN_UP_TIME_OUT); - pwrsave = 0; - } else { - /* can't take over 500 ms */ - c = ide_wait(device, IDE_TIME_OUT); - } - - if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != - ATA_STAT_DRQ) { - printf("Error (no IRQ) dev %d blk " LBAF ": status " - "%#02x\n", device, blknr, c); - break; - } - - ide_input_data(device, buffer, ATA_SECTORWORDS); - (void) ide_inb(device, ATA_STATUS); /* clear IRQ */ - - ++n; - ++blknr; - buffer += ATA_BLOCKSIZE; - } -IDE_READ_E: - ide_led(DEVICE_LED(device), 0); /* LED off */ - return (n); -} - -/* ------------------------------------------------------------------------- */ - - -ulong ide_write(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt, - const void *buffer) -{ - int device = block_dev->devnum; - ulong n = 0; - unsigned char c; - -#ifdef CONFIG_LBA48 - unsigned char lba48 = 0; - - if (blknr & 0x0000fffff0000000ULL) { - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - - ide_led(DEVICE_LED(device), 1); /* LED on */ - - /* Select device - */ - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - - while (blkcnt-- > 0) { - - c = ide_wait(device, IDE_TIME_OUT); - - if (c & ATA_STAT_BUSY) { - printf("IDE read: device %d not ready\n", device); - goto WR_OUT; - } -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - ide_outb(device, ATA_SECT_CNT, 0); - ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF); -#ifdef CONFIG_SYS_64BIT_LBA - ide_outb(device, ATA_LBA_MID, (blknr >> 32) & 0xFF); - ide_outb(device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF); -#else - ide_outb(device, ATA_LBA_MID, 0); - ide_outb(device, ATA_LBA_HIGH, 0); -#endif - } -#endif - ide_outb(device, ATA_SECT_CNT, 1); - ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF); - ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF); - ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF); - -#ifdef CONFIG_LBA48 - if (lba48) { - ide_outb(device, ATA_DEV_HD, - ATA_LBA | ATA_DEVICE(device)); - ide_outb(device, ATA_COMMAND, ATA_CMD_WRITE_EXT); - - } else -#endif - { - ide_outb(device, ATA_DEV_HD, ATA_LBA | - ATA_DEVICE(device) | ((blknr >> 24) & 0xF)); - ide_outb(device, ATA_COMMAND, ATA_CMD_WRITE); - } - - udelay(50); - - /* can't take over 500 ms */ - c = ide_wait(device, IDE_TIME_OUT); - - if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != - ATA_STAT_DRQ) { - printf("Error (no IRQ) dev %d blk " LBAF ": status " - "%#02x\n", device, blknr, c); - goto WR_OUT; - } - - ide_output_data(device, buffer, ATA_SECTORWORDS); - c = ide_inb(device, ATA_STATUS); /* clear IRQ */ - ++n; - ++blknr; - buffer += ATA_BLOCKSIZE; - } -WR_OUT: - ide_led(DEVICE_LED(device), 0); /* LED off */ - return (n); -} - -/* ------------------------------------------------------------------------- */ - -/* - * copy src to dest, skipping leading and trailing blanks and null - * terminate the string - * "len" is the size of available memory including the terminating '\0' - */ -static void ident_cpy(unsigned char *dst, unsigned char *src, - unsigned int len) -{ - unsigned char *end, *last; - - last = dst; - end = src + len - 1; - - /* reserve space for '\0' */ - if (len < 2) - goto OUT; - - /* skip leading white space */ - while ((*src) && (src < end) && (*src == ' ')) - ++src; - - /* copy string, omitting trailing white space */ - while ((*src) && (src < end)) { - *dst++ = *src; - if (*src++ != ' ') - last = dst; - } -OUT: - *last = '\0'; -} - -/* ------------------------------------------------------------------------- */ - -/* - * Wait until Busy bit is off, or timeout (in ms) - * Return last status - */ -static uchar ide_wait(int dev, ulong t) -{ - ulong delay = 10 * t; /* poll every 100 us */ - uchar c; - - while ((c = ide_inb(dev, ATA_STATUS)) & ATA_STAT_BUSY) { - udelay(100); - if (delay-- == 0) - break; - } - return (c); -} - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_IDE_RESET -extern void ide_set_reset(int idereset); - -static void ide_reset(void) -{ - int i; - - curr_device = -1; - for (i = 0; i < CONFIG_SYS_IDE_MAXBUS; ++i) - ide_bus_ok[i] = 0; - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) - ide_dev_desc[i].type = DEV_TYPE_UNKNOWN; - - ide_set_reset(1); /* assert reset */ - - /* the reset signal shall be asserted for et least 25 us */ - udelay(25); - - WATCHDOG_RESET(); - - /* de-assert RESET signal */ - ide_set_reset(0); - - /* wait 250 ms */ - for (i = 0; i < 250; ++i) - udelay(1000); -} - -#endif /* CONFIG_IDE_RESET */ - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_OF_IDE_FIXUP) -int ide_device_present(int dev) -{ - if (dev >= CONFIG_SYS_IDE_MAXBUS) - return 0; - return (ide_dev_desc[dev].type == DEV_TYPE_UNKNOWN ? 0 : 1); -} -#endif -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_ATAPI -/**************************************************************************** - * ATAPI Support - */ - -#if defined(CONFIG_IDE_SWAP_IO) -/* since ATAPI may use commands with not 4 bytes alligned length - * we have our own transfer functions, 2 bytes alligned */ -__weak void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) -{ - ushort *dbuf; - volatile ushort *pbuf; - - pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); - dbuf = (ushort *) sect_buf; - - debug("in output data shorts base for read is %lx\n", - (unsigned long) pbuf); - - while (shorts--) { - EIEIO; - *pbuf = *dbuf++; - } -} - -__weak void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) -{ - ushort *dbuf; - volatile ushort *pbuf; - - pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); - dbuf = (ushort *) sect_buf; - - debug("in input data shorts base for read is %lx\n", - (unsigned long) pbuf); - - while (shorts--) { - EIEIO; - *dbuf++ = *pbuf; - } -} - -#else /* ! CONFIG_IDE_SWAP_IO */ -__weak void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) -{ - outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); -} - -__weak void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) -{ - insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); -} - -#endif /* CONFIG_IDE_SWAP_IO */ - -/* - * Wait until (Status & mask) == res, or timeout (in ms) - * Return last status - * This is used since some ATAPI CD ROMs clears their Busy Bit first - * and then they set their DRQ Bit - */ -static uchar atapi_wait_mask(int dev, ulong t, uchar mask, uchar res) -{ - ulong delay = 10 * t; /* poll every 100 us */ - uchar c; - - /* prevents to read the status before valid */ - c = ide_inb(dev, ATA_DEV_CTL); - - while (((c = ide_inb(dev, ATA_STATUS)) & mask) != res) { - /* break if error occurs (doesn't make sense to wait more) */ - if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) - break; - udelay(100); - if (delay-- == 0) - break; - } - return (c); -} - -/* - * issue an atapi command - */ -unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, - unsigned char *buffer, int buflen) -{ - unsigned char c, err, mask, res; - int n; - - ide_led(DEVICE_LED(device), 1); /* LED on */ - - /* Select device - */ - mask = ATA_STAT_BUSY | ATA_STAT_DRQ; - res = 0; - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res); - if ((c & mask) != res) { - printf("ATAPI_ISSUE: device %d not ready status %X\n", device, - c); - err = 0xFF; - goto AI_OUT; - } - /* write taskfile */ - ide_outb(device, ATA_ERROR_REG, 0); /* no DMA, no overlaped */ - ide_outb(device, ATA_SECT_CNT, 0); - ide_outb(device, ATA_SECT_NUM, 0); - ide_outb(device, ATA_CYL_LOW, (unsigned char) (buflen & 0xFF)); - ide_outb(device, ATA_CYL_HIGH, - (unsigned char) ((buflen >> 8) & 0xFF)); - ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - - ide_outb(device, ATA_COMMAND, ATAPI_CMD_PACKET); - udelay(50); - - mask = ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR; - res = ATA_STAT_DRQ; - c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res); - - if ((c & mask) != res) { /* DRQ must be 1, BSY 0 */ - printf("ATAPI_ISSUE: Error (no IRQ) before sending ccb dev %d status 0x%02x\n", - device, c); - err = 0xFF; - goto AI_OUT; - } - - /* write command block */ - ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2); - - /* ATAPI Command written wait for completition */ - udelay(5000); /* device must set bsy */ - - mask = ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR; - /* - * if no data wait for DRQ = 0 BSY = 0 - * if data wait for DRQ = 1 BSY = 0 - */ - res = 0; - if (buflen) - res = ATA_STAT_DRQ; - c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res); - if ((c & mask) != res) { - if (c & ATA_STAT_ERR) { - err = (ide_inb(device, ATA_ERROR_REG)) >> 4; - debug("atapi_issue 1 returned sense key %X status %02X\n", - err, c); - } else { - printf("ATAPI_ISSUE: (no DRQ) after sending ccb (%x) status 0x%02x\n", - ccb[0], c); - err = 0xFF; - } - goto AI_OUT; - } - n = ide_inb(device, ATA_CYL_HIGH); - n <<= 8; - n += ide_inb(device, ATA_CYL_LOW); - if (n > buflen) { - printf("ERROR, transfer bytes %d requested only %d\n", n, - buflen); - err = 0xff; - goto AI_OUT; - } - if ((n == 0) && (buflen < 0)) { - printf("ERROR, transfer bytes %d requested %d\n", n, buflen); - err = 0xff; - goto AI_OUT; - } - if (n != buflen) { - debug("WARNING, transfer bytes %d not equal with requested %d\n", - n, buflen); - } - if (n != 0) { /* data transfer */ - debug("ATAPI_ISSUE: %d Bytes to transfer\n", n); - /* we transfer shorts */ - n >>= 1; - /* ok now decide if it is an in or output */ - if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) { - debug("Write to device\n"); - ide_output_data_shorts(device, - (unsigned short *) buffer, n); - } else { - debug("Read from device @ %p shorts %d\n", buffer, n); - ide_input_data_shorts(device, - (unsigned short *) buffer, n); - } - } - udelay(5000); /* seems that some CD ROMs need this... */ - mask = ATA_STAT_BUSY | ATA_STAT_ERR; - res = 0; - c = atapi_wait_mask(device, ATAPI_TIME_OUT, mask, res); - if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) { - err = (ide_inb(device, ATA_ERROR_REG) >> 4); - debug("atapi_issue 2 returned sense key %X status %X\n", err, - c); - } else { - err = 0; - } -AI_OUT: - ide_led(DEVICE_LED(device), 0); /* LED off */ - return (err); -} - -/* - * sending the command to atapi_issue. If an status other than good - * returns, an request_sense will be issued - */ - -#define ATAPI_DRIVE_NOT_READY 100 -#define ATAPI_UNIT_ATTN 10 - -unsigned char atapi_issue_autoreq(int device, - unsigned char *ccb, - int ccblen, - unsigned char *buffer, int buflen) -{ - unsigned char sense_data[18], sense_ccb[12]; - unsigned char res, key, asc, ascq; - int notready, unitattn; - - unitattn = ATAPI_UNIT_ATTN; - notready = ATAPI_DRIVE_NOT_READY; - -retry: - res = atapi_issue(device, ccb, ccblen, buffer, buflen); - if (res == 0) - return 0; /* Ok */ - - if (res == 0xFF) - return 0xFF; /* error */ - - debug("(auto_req)atapi_issue returned sense key %X\n", res); - - memset(sense_ccb, 0, sizeof(sense_ccb)); - memset(sense_data, 0, sizeof(sense_data)); - sense_ccb[0] = ATAPI_CMD_REQ_SENSE; - sense_ccb[4] = 18; /* allocation Length */ - - res = atapi_issue(device, sense_ccb, 12, sense_data, 18); - key = (sense_data[2] & 0xF); - asc = (sense_data[12]); - ascq = (sense_data[13]); - - debug("ATAPI_CMD_REQ_SENSE returned %x\n", res); - debug(" Sense page: %02X key %02X ASC %02X ASCQ %02X\n", - sense_data[0], key, asc, ascq); - - if ((key == 0)) - return 0; /* ok device ready */ - - if ((key == 6) || (asc == 0x29) || (asc == 0x28)) { /* Unit Attention */ - if (unitattn-- > 0) { - udelay(200 * 1000); - goto retry; - } - printf("Unit Attention, tried %d\n", ATAPI_UNIT_ATTN); - goto error; - } - if ((asc == 0x4) && (ascq == 0x1)) { - /* not ready, but will be ready soon */ - if (notready-- > 0) { - udelay(200 * 1000); - goto retry; - } - printf("Drive not ready, tried %d times\n", - ATAPI_DRIVE_NOT_READY); - goto error; - } - if (asc == 0x3a) { - debug("Media not present\n"); - goto error; - } - - printf("ERROR: Unknown Sense key %02X ASC %02X ASCQ %02X\n", key, asc, - ascq); -error: - debug("ERROR Sense key %02X ASC %02X ASCQ %02X\n", key, asc, ascq); - return (0xFF); -} - - -static void atapi_inquiry(struct blk_desc *dev_desc) -{ - unsigned char ccb[12]; /* Command descriptor block */ - unsigned char iobuf[64]; /* temp buf */ - unsigned char c; - int device; - - device = dev_desc->devnum; - dev_desc->type = DEV_TYPE_UNKNOWN; /* not yet valid */ - dev_desc->block_read = atapi_read; - - memset(ccb, 0, sizeof(ccb)); - memset(iobuf, 0, sizeof(iobuf)); - - ccb[0] = ATAPI_CMD_INQUIRY; - ccb[4] = 40; /* allocation Legnth */ - c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *) iobuf, 40); - - debug("ATAPI_CMD_INQUIRY returned %x\n", c); - if (c != 0) - return; - - /* copy device ident strings */ - ident_cpy((unsigned char *) dev_desc->vendor, &iobuf[8], 8); - ident_cpy((unsigned char *) dev_desc->product, &iobuf[16], 16); - ident_cpy((unsigned char *) dev_desc->revision, &iobuf[32], 5); - - dev_desc->lun = 0; - dev_desc->lba = 0; - dev_desc->blksz = 0; - dev_desc->log2blksz = LOG2_INVALID(typeof(dev_desc->log2blksz)); - dev_desc->type = iobuf[0] & 0x1f; - - if ((iobuf[1] & 0x80) == 0x80) - dev_desc->removable = 1; - else - dev_desc->removable = 0; - - memset(ccb, 0, sizeof(ccb)); - memset(iobuf, 0, sizeof(iobuf)); - ccb[0] = ATAPI_CMD_START_STOP; - ccb[4] = 0x03; /* start */ - - c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *) iobuf, 0); - - debug("ATAPI_CMD_START_STOP returned %x\n", c); - if (c != 0) - return; - - memset(ccb, 0, sizeof(ccb)); - memset(iobuf, 0, sizeof(iobuf)); - c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *) iobuf, 0); - - debug("ATAPI_CMD_UNIT_TEST_READY returned %x\n", c); - if (c != 0) - return; - - memset(ccb, 0, sizeof(ccb)); - memset(iobuf, 0, sizeof(iobuf)); - ccb[0] = ATAPI_CMD_READ_CAP; - c = atapi_issue_autoreq(device, ccb, 12, (unsigned char *) iobuf, 8); - debug("ATAPI_CMD_READ_CAP returned %x\n", c); - if (c != 0) - return; - - debug("Read Cap: LBA %02X%02X%02X%02X blksize %02X%02X%02X%02X\n", - iobuf[0], iobuf[1], iobuf[2], iobuf[3], - iobuf[4], iobuf[5], iobuf[6], iobuf[7]); - - dev_desc->lba = ((unsigned long) iobuf[0] << 24) + - ((unsigned long) iobuf[1] << 16) + - ((unsigned long) iobuf[2] << 8) + ((unsigned long) iobuf[3]); - dev_desc->blksz = ((unsigned long) iobuf[4] << 24) + - ((unsigned long) iobuf[5] << 16) + - ((unsigned long) iobuf[6] << 8) + ((unsigned long) iobuf[7]); - dev_desc->log2blksz = LOG2(dev_desc->blksz); -#ifdef CONFIG_LBA48 - /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */ - dev_desc->lba48 = 0; -#endif - return; -} - - -/* - * atapi_read: - * we transfer only one block per command, since the multiple DRQ per - * command is not yet implemented - */ -#define ATAPI_READ_MAX_BYTES 2048 /* we read max 2kbytes */ -#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */ -#define ATAPI_READ_MAX_BLOCK (ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE) - -ulong atapi_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt, - void *buffer) -{ - int device = block_dev->devnum; - ulong n = 0; - unsigned char ccb[12]; /* Command descriptor block */ - ulong cnt; - - debug("atapi_read dev %d start " LBAF " blocks " LBAF " buffer at %lX\n", - device, blknr, blkcnt, (ulong) buffer); - - do { - if (blkcnt > ATAPI_READ_MAX_BLOCK) - cnt = ATAPI_READ_MAX_BLOCK; - else - cnt = blkcnt; - - ccb[0] = ATAPI_CMD_READ_12; - ccb[1] = 0; /* reserved */ - ccb[2] = (unsigned char) (blknr >> 24) & 0xFF; /* MSB Block */ - ccb[3] = (unsigned char) (blknr >> 16) & 0xFF; /* */ - ccb[4] = (unsigned char) (blknr >> 8) & 0xFF; - ccb[5] = (unsigned char) blknr & 0xFF; /* LSB Block */ - ccb[6] = (unsigned char) (cnt >> 24) & 0xFF; /* MSB Block cnt */ - ccb[7] = (unsigned char) (cnt >> 16) & 0xFF; - ccb[8] = (unsigned char) (cnt >> 8) & 0xFF; - ccb[9] = (unsigned char) cnt & 0xFF; /* LSB Block */ - ccb[10] = 0; /* reserved */ - ccb[11] = 0; /* reserved */ - - if (atapi_issue_autoreq(device, ccb, 12, - (unsigned char *) buffer, - cnt * ATAPI_READ_BLOCK_SIZE) - == 0xFF) { - return (n); - } - n += cnt; - blkcnt -= cnt; - blknr += cnt; - buffer += (cnt * ATAPI_READ_BLOCK_SIZE); - } while (blkcnt > 0); - return (n); -} - -/* ------------------------------------------------------------------------- */ - -#endif /* CONFIG_ATAPI */ - U_BOOT_CMD(ide, 5, 1, do_ide, "IDE sub-system", "reset - reset IDE controller\n" @@ -314,12 +314,14 @@ static int do_mmcrpmb(cmd_tbl_t *cmdtp, int flag, } /* Switch to the RPMB partition */ original_part = mmc->block_dev.hwpart; - if (mmc_select_hwpart(curr_device, MMC_PART_RPMB) != 0) + if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, MMC_PART_RPMB) != + 0) return CMD_RET_FAILURE; ret = cp->cmd(cmdtp, flag, argc, argv); /* Return to original partition */ - if (mmc_select_hwpart(curr_device, original_part) != 0) + if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, original_part) != + 0) return CMD_RET_FAILURE; return ret; } @@ -346,7 +348,7 @@ static int do_mmc_read(cmd_tbl_t *cmdtp, int flag, printf("\nMMC read: dev # %d, block # %d, count %d ... ", curr_device, blk, cnt); - n = blk_dread(&mmc->block_dev, blk, cnt, addr); + n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr); /* flush cache after read */ flush_cache((ulong)addr, cnt * 512); /* FIXME */ printf("%d blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR"); @@ -378,7 +380,7 @@ static int do_mmc_write(cmd_tbl_t *cmdtp, int flag, printf("Error: card is write protected!\n"); return CMD_RET_FAILURE; } - n = blk_dwrite(&mmc->block_dev, blk, cnt, addr); + n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr); printf("%d blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR"); return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; @@ -406,7 +408,7 @@ static int do_mmc_erase(cmd_tbl_t *cmdtp, int flag, printf("Error: card is write protected!\n"); return CMD_RET_FAILURE; } - n = blk_derase(&mmc->block_dev, blk, cnt); + n = blk_derase(mmc_get_blk_desc(mmc), blk, cnt); printf("%d blocks erased: %s\n", n, (n == cnt) ? "OK" : "ERROR"); return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; @@ -432,7 +434,7 @@ static int do_mmc_part(cmd_tbl_t *cmdtp, int flag, if (!mmc) return CMD_RET_FAILURE; - mmc_dev = mmc_get_dev(curr_device); + mmc_dev = blk_get_devnum_by_type(IF_TYPE_MMC, curr_device); if (mmc_dev != NULL && mmc_dev->type != DEV_TYPE_UNKNOWN) { part_print(mmc_dev); return CMD_RET_SUCCESS; @@ -467,7 +469,7 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, if (!mmc) return CMD_RET_FAILURE; - ret = mmc_select_hwpart(dev, part); + ret = blk_select_hwpart_devnum(IF_TYPE_MMC, dev, part); printf("switch to partitions #%d, %s\n", part, (!ret) ? "OK" : "ERROR"); if (ret) @@ -478,7 +480,7 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, printf("mmc%d is current device\n", curr_device); else printf("mmc%d(part %d) is current device\n", - curr_device, mmc->block_dev.hwpart); + curr_device, mmc_get_blk_desc(mmc)->hwpart); return CMD_RET_SUCCESS; } diff --git a/cmd/sata.c b/cmd/sata.c index 8748ccef69..d18b5233e6 100644 --- a/cmd/sata.c +++ b/cmd/sata.c @@ -16,70 +16,6 @@ #include <sata.h> static int sata_curr_device = -1; -struct blk_desc sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; - -static unsigned long sata_bread(struct blk_desc *block_dev, lbaint_t start, - lbaint_t blkcnt, void *dst) -{ - return sata_read(block_dev->devnum, start, blkcnt, dst); -} - -static unsigned long sata_bwrite(struct blk_desc *block_dev, lbaint_t start, - lbaint_t blkcnt, const void *buffer) -{ - return sata_write(block_dev->devnum, start, blkcnt, buffer); -} - -int __sata_initialize(void) -{ - int rc; - int i; - - for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) { - memset(&sata_dev_desc[i], 0, sizeof(struct blk_desc)); - sata_dev_desc[i].if_type = IF_TYPE_SATA; - sata_dev_desc[i].devnum = i; - sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN; - sata_dev_desc[i].type = DEV_TYPE_HARDDISK; - sata_dev_desc[i].lba = 0; - sata_dev_desc[i].blksz = 512; - sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz); - sata_dev_desc[i].block_read = sata_bread; - sata_dev_desc[i].block_write = sata_bwrite; - - rc = init_sata(i); - if (!rc) { - rc = scan_sata(i); - if (!rc && (sata_dev_desc[i].lba > 0) && - (sata_dev_desc[i].blksz > 0)) - part_init(&sata_dev_desc[i]); - } - } - sata_curr_device = 0; - return rc; -} -int sata_initialize(void) __attribute__((weak,alias("__sata_initialize"))); - -__weak int __sata_stop(void) -{ - int i, err = 0; - - for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) - err |= reset_sata(i); - - if (err) - printf("Could not reset some SATA devices\n"); - - return err; -} -int sata_stop(void) __attribute__((weak, alias("__sata_stop"))); - -#ifdef CONFIG_PARTITIONS -struct blk_desc *sata_get_dev(int dev) -{ - return (dev < CONFIG_SYS_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL; -} -#endif static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -105,69 +41,40 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) case 1: return CMD_RET_USAGE; case 2: - if (strncmp(argv[1],"inf", 3) == 0) { - int i; - putc('\n'); - for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; ++i) { - if (sata_dev_desc[i].type == DEV_TYPE_UNKNOWN) - continue; - printf ("SATA device %d: ", i); - dev_print(&sata_dev_desc[i]); - } + if (strncmp(argv[1], "inf", 3) == 0) { + blk_list_devices(IF_TYPE_SATA); return 0; - } else if (strncmp(argv[1],"dev", 3) == 0) { - if ((sata_curr_device < 0) || (sata_curr_device >= CONFIG_SYS_SATA_MAX_DEVICE)) { - puts("\nno SATA devices available\n"); - return 1; + } else if (strncmp(argv[1], "dev", 3) == 0) { + if (blk_print_device_num(IF_TYPE_SATA, + sata_curr_device)) { + printf("\nno SATA devices available\n"); + return CMD_RET_FAILURE; } - printf("\nSATA device %d: ", sata_curr_device); - dev_print(&sata_dev_desc[sata_curr_device]); return 0; - } else if (strncmp(argv[1],"part",4) == 0) { - int dev, ok; - - for (ok = 0, dev = 0; dev < CONFIG_SYS_SATA_MAX_DEVICE; ++dev) { - if (sata_dev_desc[dev].part_type != PART_TYPE_UNKNOWN) { - ++ok; - if (dev) - putc ('\n'); - part_print(&sata_dev_desc[dev]); - } - } - if (!ok) { + } else if (strncmp(argv[1], "part", 4) == 0) { + if (blk_list_part(IF_TYPE_SATA)) puts("\nno SATA devices available\n"); - rc ++; - } - return rc; + return 0; } return CMD_RET_USAGE; case 3: if (strncmp(argv[1], "dev", 3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); - printf("\nSATA device %d: ", dev); - if (dev >= CONFIG_SYS_SATA_MAX_DEVICE) { - puts ("unknown device\n"); - return 1; + if (!blk_show_device(IF_TYPE_SATA, dev)) { + sata_curr_device = dev; + printf("... is now current device\n"); + } else { + return CMD_RET_FAILURE; } - dev_print(&sata_dev_desc[dev]); - - if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN) - return 1; - - sata_curr_device = dev; - - puts("... is now current device\n"); - return 0; } else if (strncmp(argv[1], "part", 4) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); - if (sata_dev_desc[dev].part_type != PART_TYPE_UNKNOWN) { - part_print(&sata_dev_desc[dev]); - } else { - printf("\nSATA device %d not available\n", dev); - rc = 1; + if (blk_print_part_devnum(IF_TYPE_SATA, dev)) { + printf("\nSATA device %d not available\n", + dev); + return CMD_RET_FAILURE; } return rc; } @@ -183,11 +90,8 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nSATA read: device %d block # %ld, count %ld ... ", sata_curr_device, blk, cnt); - n = blk_dread(&sata_dev_desc[sata_curr_device], - blk, cnt, (u32 *)addr); - - /* flush cache after read */ - flush_cache(addr, cnt * sata_dev_desc[sata_curr_device].blksz); + n = blk_read_devnum(IF_TYPE_SATA, sata_curr_device, blk, + cnt, (ulong *)addr); printf("%ld blocks read: %s\n", n, (n==cnt) ? "OK" : "ERROR"); @@ -202,8 +106,8 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nSATA write: device %d block # %ld, count %ld ... ", sata_curr_device, blk, cnt); - n = blk_dwrite(&sata_dev_desc[sata_curr_device], - blk, cnt, (u32 *)addr); + n = blk_write_devnum(IF_TYPE_SATA, sata_curr_device, + blk, cnt, (ulong *)addr); printf("%ld blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR"); diff --git a/cmd/scsi.c b/cmd/scsi.c index 8991125c66..387ca1a262 100644 --- a/cmd/scsi.c +++ b/cmd/scsi.c @@ -10,361 +10,108 @@ */ #include <common.h> #include <command.h> -#include <inttypes.h> -#include <asm/processor.h> #include <scsi.h> -#include <image.h> -#include <pci.h> - -#ifdef CONFIG_SCSI_DEV_LIST -#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST -#else -#ifdef CONFIG_SCSI_SYM53C8XX -#define SCSI_VEND_ID 0x1000 -#ifndef CONFIG_SCSI_DEV_ID -#define SCSI_DEV_ID 0x0001 -#else -#define SCSI_DEV_ID CONFIG_SCSI_DEV_ID -#endif -#elif defined CONFIG_SATA_ULI5288 - -#define SCSI_VEND_ID 0x10b9 -#define SCSI_DEV_ID 0x5288 - -#elif !defined(CONFIG_SCSI_AHCI_PLAT) -#error no scsi device defined -#endif -#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -#endif - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) -const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; -#endif -static ccb tempccb; /* temporary scsi command buffer */ - -static unsigned char tempbuff[512]; /* temporary data buffer */ - -static int scsi_max_devs; /* number of highest available scsi device */ static int scsi_curr_dev; /* current device */ -static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; - -/******************************************************************************** - * forward declerations of some Setup Routines - */ -void scsi_setup_test_unit_ready(ccb * pccb); -void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks); -void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks); -void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks); - -static void scsi_setup_write_ext(ccb *pccb, lbaint_t start, - unsigned short blocks); -void scsi_setup_inquiry(ccb * pccb); -void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); - - -static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, - unsigned long *blksz); -static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, void *buffer); -static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, const void *buffer); - - -/********************************************************************************* - * (re)-scan the scsi bus and reports scsi device info - * to the user if mode = 1 - */ -void scsi_scan(int mode) -{ - unsigned char i,perq,modi,lun; - lbaint_t capacity; - unsigned long blksz; - ccb* pccb=(ccb *)&tempccb; - - if(mode==1) { - printf("scanning bus for devices...\n"); - } - for(i=0;i<CONFIG_SYS_SCSI_MAX_DEVICE;i++) { - scsi_dev_desc[i].target=0xff; - scsi_dev_desc[i].lun=0xff; - scsi_dev_desc[i].lba=0; - scsi_dev_desc[i].blksz=0; - scsi_dev_desc[i].log2blksz = - LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz)); - scsi_dev_desc[i].type=DEV_TYPE_UNKNOWN; - scsi_dev_desc[i].vendor[0]=0; - scsi_dev_desc[i].product[0]=0; - scsi_dev_desc[i].revision[0]=0; - scsi_dev_desc[i].removable = false; - scsi_dev_desc[i].if_type=IF_TYPE_SCSI; - scsi_dev_desc[i].devnum = i; - scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN; - scsi_dev_desc[i].block_read=scsi_read; - scsi_dev_desc[i].block_write = scsi_write; - } - scsi_max_devs=0; - for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) { - pccb->target=i; - for(lun=0;lun<CONFIG_SYS_SCSI_MAX_LUN;lun++) { - pccb->lun=lun; - pccb->pdata=(unsigned char *)&tempbuff; - pccb->datalen=512; - scsi_setup_inquiry(pccb); - if (scsi_exec(pccb) != true) { - if(pccb->contr_stat==SCSI_SEL_TIME_OUT) { - debug ("Selection timeout ID %d\n",pccb->target); - continue; /* selection timeout => assuming no device present */ - } - scsi_print_error(pccb); - continue; - } - perq=tempbuff[0]; - modi=tempbuff[1]; - if((perq & 0x1f)==0x1f) { - continue; /* skip unknown devices */ - } - if((modi&0x80)==0x80) /* drive is removable */ - scsi_dev_desc[scsi_max_devs].removable=true; - /* get info for this device */ - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0], - &tempbuff[8], 8); - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0], - &tempbuff[16], 16); - scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0], - &tempbuff[32], 4); - scsi_dev_desc[scsi_max_devs].target=pccb->target; - scsi_dev_desc[scsi_max_devs].lun=pccb->lun; - - pccb->datalen=0; - scsi_setup_test_unit_ready(pccb); - if (scsi_exec(pccb) != true) { - if (scsi_dev_desc[scsi_max_devs].removable == true) { - scsi_dev_desc[scsi_max_devs].type=perq; - goto removable; - } - scsi_print_error(pccb); - continue; - } - if (scsi_read_capacity(pccb, &capacity, &blksz)) { - scsi_print_error(pccb); - continue; - } - scsi_dev_desc[scsi_max_devs].lba=capacity; - scsi_dev_desc[scsi_max_devs].blksz=blksz; - scsi_dev_desc[scsi_max_devs].log2blksz = - LOG2(scsi_dev_desc[scsi_max_devs].blksz); - scsi_dev_desc[scsi_max_devs].type=perq; - part_init(&scsi_dev_desc[scsi_max_devs]); -removable: - if(mode==1) { - printf (" Device %d: ", scsi_max_devs); - dev_print(&scsi_dev_desc[scsi_max_devs]); - } /* if mode */ - scsi_max_devs++; - } /* next LUN */ - } - if(scsi_max_devs>0) - scsi_curr_dev=0; - else - scsi_curr_dev = -1; - - printf("Found %d device(s).\n", scsi_max_devs); -#ifndef CONFIG_SPL_BUILD - setenv_ulong("scsidevs", scsi_max_devs); -#endif -} - -int scsi_get_disk_count(void) -{ - return scsi_max_devs; -} - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) -void scsi_init(void) -{ - int busdevfunc = -1; - int i; - /* - * Find a device from the list, this driver will support a single - * controller. - */ - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - /* get PCI Device ID */ -#ifdef CONFIG_DM_PCI - struct udevice *dev; - int ret; - - ret = dm_pci_find_device(scsi_device_list[i].vendor, - scsi_device_list[i].device, 0, &dev); - if (!ret) { - busdevfunc = dm_pci_get_bdf(dev); - break; - } -#else - busdevfunc = pci_find_device(scsi_device_list[i].vendor, - scsi_device_list[i].device, - 0); -#endif - if (busdevfunc != -1) - break; - } - - if (busdevfunc == -1) { - printf("Error: SCSI Controller(s) "); - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - printf("%04X:%04X ", - scsi_device_list[i].vendor, - scsi_device_list[i].device); - } - printf("not found\n"); - return; - } -#ifdef DEBUG - else { - printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", - scsi_device_list[i].vendor, - scsi_device_list[i].device, - (busdevfunc >> 16) & 0xFF, - (busdevfunc >> 11) & 0x1F, - (busdevfunc >> 8) & 0x7); - } -#endif - bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); - scsi_low_level_init(busdevfunc); - scsi_scan(1); - bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); -} -#endif - -#ifdef CONFIG_PARTITIONS -struct blk_desc *scsi_get_dev(int dev) -{ - return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL; -} -#endif - -#ifndef CONFIG_SPL_BUILD -/****************************************************************************** +/* * scsi boot command intepreter. Derived from diskboot */ -int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_scsiboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { return common_diskboot(cmdtp, "scsi", argc, argv); } -/********************************************************************************* +/* * scsi command intepreter */ -int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_scsi(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { switch (argc) { case 0: case 1: return CMD_RET_USAGE; - case 2: - if (strncmp(argv[1],"res",3) == 0) { - printf("\nReset SCSI\n"); - scsi_bus_reset(); - scsi_scan(1); - return 0; - } - if (strncmp(argv[1],"inf",3) == 0) { - int i; - for (i=0; i<CONFIG_SYS_SCSI_MAX_DEVICE; ++i) { - if(scsi_dev_desc[i].type==DEV_TYPE_UNKNOWN) - continue; /* list only known devices */ - printf ("SCSI dev. %d: ", i); - dev_print(&scsi_dev_desc[i]); - } - return 0; - } - if (strncmp(argv[1],"dev",3) == 0) { - if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) { - printf("\nno SCSI devices available\n"); - return 1; - } - printf ("\n Device %d: ", scsi_curr_dev); - dev_print(&scsi_dev_desc[scsi_curr_dev]); - return 0; - } - if (strncmp(argv[1],"scan",4) == 0) { - scsi_scan(1); - return 0; - } - if (strncmp(argv[1],"part",4) == 0) { - int dev, ok; - for (ok=0, dev=0; dev<CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) { - if (scsi_dev_desc[dev].type!=DEV_TYPE_UNKNOWN) { - ok++; - if (dev) - printf("\n"); - debug ("print_part of %x\n",dev); - part_print(&scsi_dev_desc[dev]); - } - } - if (!ok) - printf("\nno SCSI devices available\n"); - return 1; + if (strncmp(argv[1], "res", 3) == 0) { + printf("\nReset SCSI\n"); + scsi_bus_reset(); + scsi_scan(1); + return 0; + } + if (strncmp(argv[1], "inf", 3) == 0) { + blk_list_devices(IF_TYPE_SCSI); + return 0; + } + if (strncmp(argv[1], "dev", 3) == 0) { + if (blk_print_device_num(IF_TYPE_SCSI, scsi_curr_dev)) { + printf("\nno SCSI devices available\n"); + return CMD_RET_FAILURE; } - return CMD_RET_USAGE; + + return 0; + } + if (strncmp(argv[1], "scan", 4) == 0) { + scsi_scan(1); + return 0; + } + if (strncmp(argv[1], "part", 4) == 0) { + if (blk_list_part(IF_TYPE_SCSI)) + printf("\nno SCSI devices available\n"); + return 0; + } + return CMD_RET_USAGE; case 3: - if (strncmp(argv[1],"dev",3) == 0) { - int dev = (int)simple_strtoul(argv[2], NULL, 10); - printf ("\nSCSI device %d: ", dev); - if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) { - printf("unknown device\n"); - return 1; - } - printf ("\n Device %d: ", dev); - dev_print(&scsi_dev_desc[dev]); - if(scsi_dev_desc[dev].type == DEV_TYPE_UNKNOWN) { - return 1; - } + if (strncmp(argv[1], "dev", 3) == 0) { + int dev = (int)simple_strtoul(argv[2], NULL, 10); + + if (!blk_show_device(IF_TYPE_SCSI, dev)) { scsi_curr_dev = dev; printf("... is now current device\n"); - return 0; + } else { + return CMD_RET_FAILURE; } - if (strncmp(argv[1],"part",4) == 0) { - int dev = (int)simple_strtoul(argv[2], NULL, 10); - if(scsi_dev_desc[dev].type != DEV_TYPE_UNKNOWN) { - part_print(&scsi_dev_desc[dev]); - } - else { - printf ("\nSCSI device %d not available\n", dev); - } - return 1; - } - return CMD_RET_USAGE; - default: - /* at least 4 args */ - if (strcmp(argv[1],"read") == 0) { - ulong addr = simple_strtoul(argv[2], NULL, 16); - ulong blk = simple_strtoul(argv[3], NULL, 16); - ulong cnt = simple_strtoul(argv[4], NULL, 16); - ulong n; - printf ("\nSCSI read: device %d block # %ld, count %ld ... ", - scsi_curr_dev, blk, cnt); - n = scsi_read(&scsi_dev_desc[scsi_curr_dev], - blk, cnt, (ulong *)addr); - printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); - return 0; - } else if (strcmp(argv[1], "write") == 0) { - ulong addr = simple_strtoul(argv[2], NULL, 16); - ulong blk = simple_strtoul(argv[3], NULL, 16); - ulong cnt = simple_strtoul(argv[4], NULL, 16); - ulong n; - printf("\nSCSI write: device %d block # %ld, " - "count %ld ... ", - scsi_curr_dev, blk, cnt); - n = scsi_write(&scsi_dev_desc[scsi_curr_dev], - blk, cnt, (ulong *)addr); - printf("%ld blocks written: %s\n", n, - (n == cnt) ? "OK" : "ERROR"); - return 0; + return 0; + } + if (strncmp(argv[1], "part", 4) == 0) { + int dev = (int)simple_strtoul(argv[2], NULL, 10); + + if (blk_print_part_devnum(IF_TYPE_SCSI, dev)) { + printf("\nSCSI device %d not available\n", + dev); + return CMD_RET_FAILURE; } + return 0; + } + return CMD_RET_USAGE; + default: + /* at least 4 args */ + if (strcmp(argv[1], "read") == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong blk = simple_strtoul(argv[3], NULL, 16); + ulong cnt = simple_strtoul(argv[4], NULL, 16); + ulong n; + + printf("\nSCSI read: device %d block # %ld, count %ld ... ", + scsi_curr_dev, blk, cnt); + n = blk_read_devnum(IF_TYPE_SCSI, scsi_curr_dev, blk, + cnt, (ulong *)addr); + printf("%ld blocks read: %s\n", n, + n == cnt ? "OK" : "ERROR"); + return 0; + } else if (strcmp(argv[1], "write") == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong blk = simple_strtoul(argv[3], NULL, 16); + ulong cnt = simple_strtoul(argv[4], NULL, 16); + ulong n; + + printf("\nSCSI write: device %d block # %ld, count %ld ... ", + scsi_curr_dev, blk, cnt); + n = blk_write_devnum(IF_TYPE_SCSI, scsi_curr_dev, blk, + cnt, (ulong *)addr); + printf("%ld blocks written: %s\n", n, + n == cnt ? "OK" : "ERROR"); + return 0; + } } /* switch */ return CMD_RET_USAGE; } @@ -388,347 +135,3 @@ U_BOOT_CMD( "boot from SCSI device", "loadAddr dev:part" ); -#endif - -/**************************************************************************************** - * scsi_read - */ - -/* almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_READ_BLK 0xFFFF -#define SCSI_LBA48_READ 0xFFFFFFF - -static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, void *buffer) -{ - int device = block_dev->devnum; - lbaint_t start, blks; - uintptr_t buf_addr; - unsigned short smallblks = 0; - ccb* pccb=(ccb *)&tempccb; - device&=0xff; - /* Setup device - */ - pccb->target=scsi_dev_desc[device].target; - pccb->lun=scsi_dev_desc[device].lun; - buf_addr=(unsigned long)buffer; - start=blknr; - blks=blkcnt; - debug("\nscsi_read: dev %d startblk " LBAF - ", blccnt " LBAF " buffer %lx\n", - device, start, blks, (unsigned long)buffer); - do { - pccb->pdata=(unsigned char *)buf_addr; -#ifdef CONFIG_SYS_64BIT_LBA - if (start > SCSI_LBA48_READ) { - unsigned long blocks; - blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); - pccb->datalen = scsi_dev_desc[device].blksz * blocks; - scsi_setup_read16(pccb, start, blocks); - start += blocks; - blks -= blocks; - } else -#endif - if (blks > SCSI_MAX_READ_BLK) { - pccb->datalen=scsi_dev_desc[device].blksz * SCSI_MAX_READ_BLK; - smallblks=SCSI_MAX_READ_BLK; - scsi_setup_read_ext(pccb,start,smallblks); - start+=SCSI_MAX_READ_BLK; - blks-=SCSI_MAX_READ_BLK; - } - else { - pccb->datalen=scsi_dev_desc[device].blksz * blks; - smallblks=(unsigned short) blks; - scsi_setup_read_ext(pccb,start,smallblks); - start+=blks; - blks=0; - } - debug("scsi_read_ext: startblk " LBAF - ", blccnt %x buffer %" PRIXPTR "\n", - start, smallblks, buf_addr); - if (scsi_exec(pccb) != true) { - scsi_print_error(pccb); - blkcnt-=blks; - break; - } - buf_addr+=pccb->datalen; - } while(blks!=0); - debug("scsi_read_ext: end startblk " LBAF - ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); - return(blkcnt); -} - -/******************************************************************************* - * scsi_write - */ - -/* Almost the maximum amount of the scsi_ext command.. */ -#define SCSI_MAX_WRITE_BLK 0xFFFF - -static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, - lbaint_t blkcnt, const void *buffer) -{ - int device = block_dev->devnum; - lbaint_t start, blks; - uintptr_t buf_addr; - unsigned short smallblks; - ccb* pccb = (ccb *)&tempccb; - device &= 0xff; - /* Setup device - */ - pccb->target = scsi_dev_desc[device].target; - pccb->lun = scsi_dev_desc[device].lun; - buf_addr = (unsigned long)buffer; - start = blknr; - blks = blkcnt; - debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", - __func__, device, start, blks, (unsigned long)buffer); - do { - pccb->pdata = (unsigned char *)buf_addr; - if (blks > SCSI_MAX_WRITE_BLK) { - pccb->datalen = (scsi_dev_desc[device].blksz * - SCSI_MAX_WRITE_BLK); - smallblks = SCSI_MAX_WRITE_BLK; - scsi_setup_write_ext(pccb, start, smallblks); - start += SCSI_MAX_WRITE_BLK; - blks -= SCSI_MAX_WRITE_BLK; - } else { - pccb->datalen = scsi_dev_desc[device].blksz * blks; - smallblks = (unsigned short)blks; - scsi_setup_write_ext(pccb, start, smallblks); - start += blks; - blks = 0; - } - debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", - __func__, start, smallblks, buf_addr); - if (scsi_exec(pccb) != true) { - scsi_print_error(pccb); - blkcnt -= blks; - break; - } - buf_addr += pccb->datalen; - } while (blks != 0); - debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", - __func__, start, smallblks, buf_addr); - return blkcnt; -} - -/* copy src to dest, skipping leading and trailing blanks - * and null terminate the string - */ -void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len) -{ - int start,end; - - start=0; - while(start<len) { - if(src[start]!=' ') - break; - start++; - } - end=len-1; - while(end>start) { - if(src[end]!=' ') - break; - end--; - } - for( ; start<=end; start++) { - *dest++=src[start]; - } - *dest='\0'; -} - - -/* Trim trailing blanks, and NUL-terminate string - */ -void scsi_trim_trail (unsigned char *str, unsigned int len) -{ - unsigned char *p = str + len - 1; - - while (len-- > 0) { - *p-- = '\0'; - if (*p != ' ') { - return; - } - } -} - -int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) -{ - *capacity = 0; - - memset(pccb->cmd, 0, sizeof(pccb->cmd)); - pccb->cmd[0] = SCSI_RD_CAPAC10; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmdlen = 10; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - - pccb->datalen = 8; - if (scsi_exec(pccb) != true) - return 1; - - *capacity = ((lbaint_t)pccb->pdata[0] << 24) | - ((lbaint_t)pccb->pdata[1] << 16) | - ((lbaint_t)pccb->pdata[2] << 8) | - ((lbaint_t)pccb->pdata[3]); - - if (*capacity != 0xffffffff) { - /* Read capacity (10) was sufficient for this drive. */ - *blksz = ((unsigned long)pccb->pdata[4] << 24) | - ((unsigned long)pccb->pdata[5] << 16) | - ((unsigned long)pccb->pdata[6] << 8) | - ((unsigned long)pccb->pdata[7]); - return 0; - } - - /* Read capacity (10) was insufficient. Use read capacity (16). */ - - memset(pccb->cmd, 0, sizeof(pccb->cmd)); - pccb->cmd[0] = SCSI_RD_CAPAC16; - pccb->cmd[1] = 0x10; - pccb->cmdlen = 16; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - - pccb->datalen = 16; - if (scsi_exec(pccb) != true) - return 1; - - *capacity = ((uint64_t)pccb->pdata[0] << 56) | - ((uint64_t)pccb->pdata[1] << 48) | - ((uint64_t)pccb->pdata[2] << 40) | - ((uint64_t)pccb->pdata[3] << 32) | - ((uint64_t)pccb->pdata[4] << 24) | - ((uint64_t)pccb->pdata[5] << 16) | - ((uint64_t)pccb->pdata[6] << 8) | - ((uint64_t)pccb->pdata[7]); - - *blksz = ((uint64_t)pccb->pdata[8] << 56) | - ((uint64_t)pccb->pdata[9] << 48) | - ((uint64_t)pccb->pdata[10] << 40) | - ((uint64_t)pccb->pdata[11] << 32) | - ((uint64_t)pccb->pdata[12] << 24) | - ((uint64_t)pccb->pdata[13] << 16) | - ((uint64_t)pccb->pdata[14] << 8) | - ((uint64_t)pccb->pdata[15]); - - return 0; -} - - -/************************************************************************************ - * Some setup (fill-in) routines - */ -void scsi_setup_test_unit_ready(ccb * pccb) -{ - pccb->cmd[0]=SCSI_TST_U_RDY; - pccb->cmd[1]=pccb->lun<<5; - pccb->cmd[2]=0; - pccb->cmd[3]=0; - pccb->cmd[4]=0; - pccb->cmd[5]=0; - pccb->cmdlen=6; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ -} - -#ifdef CONFIG_SYS_64BIT_LBA -void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks) -{ - pccb->cmd[0] = SCSI_READ16; - pccb->cmd[1] = pccb->lun<<5; - pccb->cmd[2] = ((unsigned char) (start >> 56)) & 0xff; - pccb->cmd[3] = ((unsigned char) (start >> 48)) & 0xff; - pccb->cmd[4] = ((unsigned char) (start >> 40)) & 0xff; - pccb->cmd[5] = ((unsigned char) (start >> 32)) & 0xff; - pccb->cmd[6] = ((unsigned char) (start >> 24)) & 0xff; - pccb->cmd[7] = ((unsigned char) (start >> 16)) & 0xff; - pccb->cmd[8] = ((unsigned char) (start >> 8)) & 0xff; - pccb->cmd[9] = ((unsigned char) (start)) & 0xff; - pccb->cmd[10] = 0; - pccb->cmd[11] = ((unsigned char) (blocks >> 24)) & 0xff; - pccb->cmd[12] = ((unsigned char) (blocks >> 16)) & 0xff; - pccb->cmd[13] = ((unsigned char) (blocks >> 8)) & 0xff; - pccb->cmd[14] = (unsigned char) blocks & 0xff; - pccb->cmd[15] = 0; - pccb->cmdlen = 16; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug ("scsi_setup_read16: cmd: %02X %02X " - "startblk %02X%02X%02X%02X%02X%02X%02X%02X " - "blccnt %02X%02X%02X%02X\n", - pccb->cmd[0], pccb->cmd[1], - pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], - pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], - pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); -} -#endif - -void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0]=SCSI_READ10; - pccb->cmd[1]=pccb->lun<<5; - pccb->cmd[2]=((unsigned char) (start>>24))&0xff; - pccb->cmd[3]=((unsigned char) (start>>16))&0xff; - pccb->cmd[4]=((unsigned char) (start>>8))&0xff; - pccb->cmd[5]=((unsigned char) (start))&0xff; - pccb->cmd[6]=0; - pccb->cmd[7]=((unsigned char) (blocks>>8))&0xff; - pccb->cmd[8]=(unsigned char) blocks & 0xff; - pccb->cmd[6]=0; - pccb->cmdlen=10; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ - debug ("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", - pccb->cmd[0],pccb->cmd[1], - pccb->cmd[2],pccb->cmd[3],pccb->cmd[4],pccb->cmd[5], - pccb->cmd[7],pccb->cmd[8]); -} - -void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0] = SCSI_WRITE10; - pccb->cmd[1] = pccb->lun << 5; - pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff; - pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff; - pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff; - pccb->cmd[5] = ((unsigned char) (start)) & 0xff; - pccb->cmd[6] = 0; - pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff; - pccb->cmd[8] = (unsigned char)blocks & 0xff; - pccb->cmd[9] = 0; - pccb->cmdlen = 10; - pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ - debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", - __func__, - pccb->cmd[0], pccb->cmd[1], - pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], - pccb->cmd[7], pccb->cmd[8]); -} - -void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks) -{ - pccb->cmd[0]=SCSI_READ6; - pccb->cmd[1]=pccb->lun<<5 | (((unsigned char)(start>>16))&0x1f); - pccb->cmd[2]=((unsigned char) (start>>8))&0xff; - pccb->cmd[3]=((unsigned char) (start))&0xff; - pccb->cmd[4]=(unsigned char) blocks & 0xff; - pccb->cmd[5]=0; - pccb->cmdlen=6; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ - debug ("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", - pccb->cmd[0],pccb->cmd[1], - pccb->cmd[2],pccb->cmd[3],pccb->cmd[4]); -} - - -void scsi_setup_inquiry(ccb * pccb) -{ - pccb->cmd[0]=SCSI_INQUIRY; - pccb->cmd[1]=pccb->lun<<5; - pccb->cmd[2]=0; - pccb->cmd[3]=0; - if(pccb->datalen>255) - pccb->cmd[4]=255; - else - pccb->cmd[4]=(unsigned char)pccb->datalen; - pccb->cmd[5]=0; - pccb->cmdlen=6; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ -} @@ -723,7 +723,8 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int devno, ok = 0; if (argc == 2) { for (devno = 0; ; ++devno) { - stor_dev = usb_stor_get_dev(devno); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, + devno); if (stor_dev == NULL) break; if (stor_dev->type != DEV_TYPE_UNKNOWN) { @@ -736,7 +737,7 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } } else { devno = simple_strtoul(argv[2], NULL, 16); - stor_dev = usb_stor_get_dev(devno); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, devno); if (stor_dev != NULL && stor_dev->type != DEV_TYPE_UNKNOWN) { ok++; @@ -762,7 +763,8 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned long n; printf("\nUSB read: device %d block # %ld, count %ld" " ... ", usb_stor_curr_dev, blk, cnt); - stor_dev = usb_stor_get_dev(usb_stor_curr_dev); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, + usb_stor_curr_dev); n = blk_dread(stor_dev, blk, cnt, (ulong *)addr); printf("%ld blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR"); @@ -783,7 +785,8 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned long n; printf("\nUSB write: device %d block # %ld, count %ld" " ... ", usb_stor_curr_dev, blk, cnt); - stor_dev = usb_stor_get_dev(usb_stor_curr_dev); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, + usb_stor_curr_dev); n = blk_dwrite(stor_dev, blk, cnt, (ulong *)addr); printf("%ld blocks write: %s\n", n, (n == cnt) ? "OK" : "ERROR"); @@ -796,7 +799,7 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc == 3) { int dev = (int)simple_strtoul(argv[2], NULL, 10); printf("\nUSB device %d: ", dev); - stor_dev = usb_stor_get_dev(dev); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, dev); if (stor_dev == NULL) { printf("unknown device\n"); return 1; @@ -810,7 +813,8 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } else { printf("\nUSB device %d: ", usb_stor_curr_dev); - stor_dev = usb_stor_get_dev(usb_stor_curr_dev); + stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, + usb_stor_curr_dev); dev_print(stor_dev); if (stor_dev->type == DEV_TYPE_UNKNOWN) return 1; |
