diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/lwmon5/lwmon5.c | 75 | ||||
| -rw-r--r-- | board/lwmon5/sdram.c | 4 |
2 files changed, 76 insertions, 3 deletions
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 29e24fb26f..9cf0fa167c 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2010 + * (C) Copyright 2007-2013 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -200,9 +200,11 @@ int misc_init_r(void) u32 pbcr; int size_val = 0; u32 reg; +#ifndef CONFIG_LCD4_LWMON5 unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1, sdr0_srst; +#endif /* * FLASH stuff... @@ -233,6 +235,7 @@ int misc_init_r(void) CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1, &flash_info[cfi_flash_num_flash_banks - 1]); +#ifndef CONFIG_LCD4_LWMON5 /* * USB suff... */ @@ -306,6 +309,7 @@ int misc_init_r(void) /* 7. Reassert internal PHY reset: */ mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY); udelay(1000); +#endif /* * Clear resets @@ -313,7 +317,9 @@ int misc_init_r(void) mtsdr(SDR0_SRST1, 0x00000000); mtsdr(SDR0_SRST0, 0x00000000); +#ifndef CONFIG_LCD4_LWMON5 printf("USB: Host(int phy) Device(ext phy)\n"); +#endif /* * Clear PLB4A0_ACR[WRP] @@ -323,10 +329,12 @@ int misc_init_r(void) reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; mtdcr(PLB4A0_ACR, reg); +#ifndef CONFIG_LCD4_LWMON5 /* * Init matrix keyboard */ misc_init_r_kbd(); +#endif return 0; } @@ -336,7 +344,7 @@ int checkboard(void) char buf[64]; int i = getenv_f("serial#", buf, sizeof(buf)); - puts("Board: lwmon5"); + printf("Board: %s", __stringify(CONFIG_HOSTNAME)); if (i > 0) { puts(", serial# "); @@ -495,3 +503,66 @@ void board_reset(void) { gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1); } + +#ifdef CONFIG_SPL_OS_BOOT +/* + * lwmon5 specific implementation of spl_start_uboot() + * + * RETURN + * 0 if booting into OS is selected (default) + * 1 if booting into U-Boot is selected + */ +int spl_start_uboot(void) +{ + char s[8]; + + env_init(); + getenv_f("boot_os", s, sizeof(s)); + if ((s != NULL) && (strcmp(s, "yes") == 0)) + return 0; + + return 1; +} + +/* + * This function is called from the SPL U-Boot version for + * early init stuff, that needs to be done for OS (e.g. Linux) + * booting. Doing it later in the real U-Boot would not work + * in case that the SPL U-Boot boots Linux directly. + */ +void spl_board_init(void) +{ + const gdc_regs *regs = board_get_regs(); + + /* + * Setup PFC registers, mainly for ethernet support + * later on in Linux + */ + board_early_init_f(); + + /* + * Clear resets + */ + mtsdr(SDR0_SRST1, 0x00000000); + mtsdr(SDR0_SRST0, 0x00000000); + + /* + * Reset Lime controller + */ + gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1); + udelay(500); + gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1); + + out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF); + udelay(300); + out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR); + + while (regs->index) { + out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) + + regs->index, regs->value); + regs++; + } + + board_backlight_brightness(DEFAULT_BRIGHTNESS); +} +#endif diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index b64b35a94e..78b8fbc841 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -6,7 +6,7 @@ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com * - * (C) Copyright 2007-2008 + * (C) Copyright 2007-2013 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -160,6 +160,7 @@ static void program_ecc(u32 start_address, ************************************************************************/ phys_size_t initdram (int board_type) { +#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_LCD4_LWMON5) /* CL=4 */ mtsdram(DDR0_02, 0x00000000); @@ -253,6 +254,7 @@ phys_size_t initdram (int board_type) * exceptions are enabled. */ set_mcsr(get_mcsr()); +#endif /* CONFIG_SPL_BUILD */ return (CONFIG_SYS_MBYTES_SDRAM << 20); } |
