diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/solidrun/mx6cuboxi/mx6cuboxi.c | 4 | ||||
| -rw-r--r-- | board/tqc/tqma6/Kconfig | 58 |
2 files changed, 60 insertions, 2 deletions
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index d15c726a01..9b1ecf0457 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -536,7 +536,7 @@ static const struct mx6_mmdc_calibration mx6dl_1g_mmcd_calib = { .p0_mpdgctrl0 = 0x023C0224, .p0_mpdgctrl1 = 0x02000220, .p1_mpdgctrl0 = 0x02200220, - .p1_mpdgctrl1 = 0x02000220, + .p1_mpdgctrl1 = 0x02040208, .p0_mprddlctl = 0x44444846, .p1_mprddlctl = 0x4042463C, .p0_mpwrdlctl = 0x32343032, @@ -627,7 +627,7 @@ static void spl_dram_init(int width) else if (is_cpu_type(MXC_CPU_MX6Q)) mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g); else if (is_cpu_type(MXC_CPU_MX6DL)) - mx6_dram_cfg(&sysinfo, &mx6q_1g_mmcd_calib, &mem_ddr_2g); + mx6_dram_cfg(&sysinfo, &mx6dl_1g_mmcd_calib, &mem_ddr_2g); else if (is_cpu_type(MXC_CPU_MX6SOLO)) mx6_dram_cfg(&sysinfo, &mx6dl_512m_mmcd_calib, &mem_ddr_2g); } diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig index f8b3d1fd40..b56237d187 100644 --- a/board/tqc/tqma6/Kconfig +++ b/board/tqc/tqma6/Kconfig @@ -12,4 +12,62 @@ config SYS_SOC config SYS_CONFIG_NAME default "tqma6" +choice + prompt "TQMa6 SoC variant" + default TQMA6Q + help + select the TQMa6 module variant. The variants differing in the used + i.MX6 CPU type and DRAM + +config TQMA6Q + bool "TQMa6Q / TQMa6D" + select MX6Q + help + select TQMa6Q / TQMa6D with i.MX6Q/D and 1GiB DRAM + +config TQMA6S + bool "TQMa6S" + select MX6S + help + select TQMa6S with i.MX6S and 512 MiB DRAM + +endchoice + +choice + prompt "TQMa6 boot configuration" + default TQMA6X_MMC_BOOT + help + Configure boot device. This is also used to implement environment + location. + +config TQMA6X_MMC_BOOT + bool "MMC / SD Boot" + help + Boot from eMMC / SD Card + +config TQMA6X_SPI_BOOT + bool "SPI NOR Boot" + help + Boot from on board SPI NOR flash + +endchoice + +choice + prompt "TQMa6 base board variant" + default MBA6 + help + Select base board for TQMa6 + +config MBA6 + bool "TQMa6 on MBa6 Starterkit" + help + Select the MBa6 starterkit. This features a GigE Phy, USB, SD-Card + etc. + +endchoice + +config IMX_CONFIG + default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q + default "board/tqc/tqma6/tqma6s.cfg" if TQMA6S + endif |
