diff options
Diffstat (limited to 'board')
25 files changed, 2 insertions, 473 deletions
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c index 6fb0096bed..3117b5fbff 100644 --- a/board/bc3450/bc3450.c +++ b/board/bc3450/bc3450.c @@ -104,7 +104,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -204,57 +203,6 @@ phys_size_t initdram (int board_type) return dramsize; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff; /* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { #if defined (CONFIG_TQM5200) @@ -276,10 +224,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h index 3f1e1691bb..48b43213dc 100644 --- a/board/bc3450/mt48lc16m16a2-75.h +++ b/board/bc3450/mt48lc16m16a2-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 /* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ @@ -33,15 +32,3 @@ /*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ #define SDRAM_CONFIG2 0x8AD70000 /*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c index dce07bf785..6ddc858ea4 100644 --- a/board/canmb/canmb.c +++ b/board/canmb/canmb.c @@ -81,7 +81,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -183,57 +182,6 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { puts ("Board: CANMB\n"); diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/canmb/mt48lc16m32s2-75.h +++ b/board/canmb/mt48lc16m32s2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/esd/cpci5200/mt46v16m16-75.h b/board/esd/cpci5200/mt46v16m16-75.h index 22d0a55444..cf63806a58 100644 --- a/board/esd/cpci5200/mt46v16m16-75.h +++ b/board/esd/cpci5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h index 22d0a55444..cf63806a58 100644 --- a/board/esd/mecp5200/mt46v16m16-75.h +++ b/board/esd/mecp5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/esd/pf5200/mt46v16m16-75.h b/board/esd/pf5200/mt46v16m16-75.h index 22d0a55444..cf63806a58 100644 --- a/board/esd/pf5200/mt46v16m16-75.h +++ b/board/esd/pf5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 75244610cf..47b2195557 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -134,7 +134,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -258,65 +257,12 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { #if defined (CONFIG_LITE5200B) puts ("Board: Freescale Lite5200B\n"); -#elif defined(CONFIG_MPC5200) +#else puts ("Board: Motorola MPC5200 (IceCube)\n"); -#elif defined(CONFIG_MGT5100) - puts ("Board: Motorola MGT5100 (IceCube)\n"); #endif return 0; } @@ -329,10 +275,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h index 4c0f9a7406..eb857404f1 100644 --- a/board/icecube/mt46v16m16-75.h +++ b/board/icecube/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/icecube/mt46v32m16.h b/board/icecube/mt46v32m16.h index de2b48bc60..519bf6d0f0 100644 --- a/board/icecube/mt46v32m16.h +++ b/board/icecube/mt46v32m16.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/icecube/mt48lc16m16a2-75.h +++ b/board/icecube/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index 6e752c6554..967aabdcfa 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -227,10 +227,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } @@ -248,10 +244,8 @@ void flash_afterinit(ulong size) *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_BOOTCS_START | size, size); } -#if defined(CONFIG_MPC5200) *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif } int update_flash_size (int flash_size) diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h index f650faaa10..423febe20a 100644 --- a/board/mcc200/mt46v16m16-75.h +++ b/board/mcc200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/mcc200/mt48lc16m16a2-75.h +++ b/board/mcc200/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/mcc200/mt48lc16m32s2-75.h +++ b/board/mcc200/mt48lc16m32s2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/munices/mt48lc16m16a2-75.h b/board/munices/mt48lc16m16a2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/munices/mt48lc16m16a2-75.h +++ b/board/munices/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h index f650faaa10..423febe20a 100644 --- a/board/pm520/mt46v16m16-75.h +++ b/board/pm520/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h index ffdf0396a5..15477259ca 100644 --- a/board/pm520/mt48lc16m16a2-75.h +++ b/board/pm520/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index 9da1041733..d6914343fa 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -84,7 +84,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -186,64 +185,9 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { -#if defined(CONFIG_MPC5200) puts ("Board: MicroSys PM520 \n"); -#elif defined(CONFIG_MGT5100) - puts ("Board: MicroSys PM510 \n"); -#endif return 0; } @@ -255,10 +199,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h index 5b0923e3e8..ae237c6cab 100644 --- a/board/total5200/mt48lc16m16a2-75.h +++ b/board/total5200/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h index 4b5ac80b35..cb4b43d63e 100644 --- a/board/total5200/mt48lc32m16a2-75.h +++ b/board/total5200/mt48lc32m16a2-75.h @@ -28,13 +28,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x514F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#else -#error CONFIG_MPC5200 is not defined -#endif diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c index dc4c6f18c2..d883eb656d 100644 --- a/board/total5200/sdram.c +++ b/board/total5200/sdram.c @@ -76,7 +76,6 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) { ulong dramsize = 0; @@ -174,54 +173,3 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) return dramsize + dramsize2; } - -#elif defined(CONFIG_MGT5100) - -long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel; - __asm__ volatile ("sync"); - - /* find RAM size */ - mpc5xxx_sdram_start(sdram_conf, 0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - mpc5xxx_sdram_start(sdram_conf, 1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - mpc5xxx_sdram_start(sdram_conf, 0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h index bc21e1d300..396a190145 100644 --- a/board/total5200/sdram.h +++ b/board/total5200/sdram.h @@ -28,12 +28,7 @@ typedef struct { ulong control; ulong config1; ulong config2; -#if defined(CONFIG_MPC5200) ulong tapdelay; -#endif -#if defined(CONFIG_MGT5100) - ulong addrsel; -#endif } sdram_conf_t; long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf); diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index c524d63f93..61b5b807af 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -47,26 +47,17 @@ phys_size_t initdram (int board_type) sdram_conf.control = SDRAM_CONTROL; sdram_conf.config1 = SDRAM_CONFIG1; sdram_conf.config2 = SDRAM_CONFIG2; -#if defined(CONFIG_MPC5200) sdram_conf.tapdelay = 0; -#endif -#if defined(CONFIG_MGT5100) - sdram_conf.addrsel = SDRAM_ADDRSEL; -#endif return mpc5xxx_sdram_init (&sdram_conf); } int checkboard (void) { -#if defined(CONFIG_MPC5200) #if CONFIG_TOTAL5200_REV==2 puts ("Board: Total5200 Rev.2 "); #else puts ("Board: Total5200 "); #endif -#elif defined(CONFIG_MGT5100) - puts ("Board: Total5100 "); -#endif /* * Retrieve FPGA Revision. @@ -85,20 +76,6 @@ int checkboard (void) return 0; } -#if defined(CONFIG_MGT5100) -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable CS0 - * because CS_BOOT cannot be written. - */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ - - return 0; -} -#endif - #ifdef CONFIG_PCI static struct pci_controller hose; @@ -266,9 +243,7 @@ static const S1D_REGS init_regs [] = void video_get_info_str (int line_number, char *info) { if (line_number == 1) { -#ifdef CONFIG_MGT5100 - strcpy (info, " Total5100"); -#elif CONFIG_TOTAL5200_REV==1 +#if CONFIG_TOTAL5200_REV==1 strcpy (info, " Total5200"); #elif CONFIG_TOTAL5200_REV==2 strcpy (info, " Total5200 Rev.2"); diff --git a/board/tqc/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h index 3f1e1691bb..48b43213dc 100644 --- a/board/tqc/tqm5200/mt48lc16m16a2-75.h +++ b/board/tqc/tqm5200/mt48lc16m16a2-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 /* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ @@ -33,15 +32,3 @@ /*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ #define SDRAM_CONFIG2 0x8AD70000 /*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif |
