summaryrefslogtreecommitdiffstats
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/gdsys/compactcenter/Makefile53
-rw-r--r--board/gdsys/compactcenter/chip_config.c87
-rw-r--r--board/gdsys/compactcenter/compactcenter.c297
-rw-r--r--board/gdsys/compactcenter/config.mk41
-rw-r--r--board/gdsys/compactcenter/init.S97
-rw-r--r--board/gdsys/compactcenter/u-boot.lds144
6 files changed, 719 insertions, 0 deletions
diff --git a/board/gdsys/compactcenter/Makefile b/board/gdsys/compactcenter/Makefile
new file mode 100644
index 0000000000..12f8a642e7
--- /dev/null
+++ b/board/gdsys/compactcenter/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2008
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+SOBJS := init.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gdsys/compactcenter/chip_config.c b/board/gdsys/compactcenter/chip_config.c
new file mode 100644
index 0000000000..e46f4d8ece
--- /dev/null
+++ b/board/gdsys/compactcenter/chip_config.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+ {
+ "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "800-nor", "NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1000-nor", "NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1066-nor", "NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88",
+ {
+ 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1066-nand", "NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88",
+ {
+ 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/gdsys/compactcenter/compactcenter.c b/board/gdsys/compactcenter/compactcenter.c
new file mode 100644
index 0000000000..477ef7005a
--- /dev/null
+++ b/board/gdsys/compactcenter/compactcenter.c
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * Based on board/amcc/canyonlands/canyonlands.c
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/4xx_pcie.h>
+#include <asm/gpio.h>
+
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CONFIG_SYS_BCSR3_PCIE 0x10
+
+int board_early_init_f(void)
+{
+ u32 pvr = get_pvr();
+
+ /*
+ * Setup the interrupt controller polarities, triggers, etc.
+ */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(uic3er, 0x00000000); /* disable all */
+ mtdcr(uic3cr, 0x00000000); /* all non-critical */
+ mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic3tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+
+ /*
+ * Configure PFC (Pin Function Control) registers
+ * enable GPIO 49-63
+ * UART0: 4 pins
+ */
+ mtsdr(SDR0_PFC0, 0x00007fff);
+ mtsdr(SDR0_PFC1, 0x00040000);
+
+ /* Enable PCI host functionality in SDR0_PCI0 */
+ mtsdr(SDR0_PCI0, 0xe0000000);
+
+ mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
+
+ /* Setup PLB4-AHB bridge based on the system address map */
+ mtdcr(AHB_TOP, 0x8000004B);
+ mtdcr(AHB_BOT, 0x8000004B);
+
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
+ /*
+ * Configure USB-STP pins as alternate and not GPIO
+ * It seems to be neccessary to configure the STP pins as GPIO
+ * input at powerup (perhaps while USB reset is asserted). So
+ * we configure those pins to their "real" function now.
+ */
+ gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ }
+
+ /* Trigger board component reset */
+ out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
+ out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
+ udelay(50);
+ out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
+ out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
+ udelay(50);
+ out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
+ out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
+
+ return 0;
+}
+
+int get_cpu_num(void)
+{
+ int cpu = NA_OR_UNKNOWN_CPU;
+
+ return cpu;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+#ifdef CONFIG_DEVCONCENTER
+ printf("Board: DevCon-Center");
+#else
+ printf("Board: CompactCenter");
+#endif
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return 0;
+}
+
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*
+ * Disable everything
+ */
+ out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
+ out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
+ out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
+ out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
+
+ /*
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options to not support sizes such as 128/256 MB.
+ */
+ out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+ out_le32((void *)PCIX0_PIM0LAH, 0);
+ out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+ out_le32((void *)PCIX0_BAR0, 0);
+
+ /*
+ * Program the board's subsystem id/vendor id
+ */
+ out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+ out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Board is always configured as host. */
+ return 1;
+}
+#endif /* CONFIG_PCI */
+
+int board_early_init_r(void)
+{
+ /*
+ * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
+ * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
+ * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfn00.0000 -> 4.cn00.0000
+ */
+
+ u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
+ EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
+
+ /* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
+ mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L
+ | bxcr_bw
+ | EBC_BXCR_BU_RW
+ | EBC_BXCR_BW_16BIT);
+
+ /* Remove TLB entry of boot EBC mapping */
+ remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
+
+ /* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
+ program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
+
+ /*
+ * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+ * 0xfc00.0000 is possible
+ */
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u32 sdr0_srst1 = 0;
+ u32 eth_cfg;
+ u32 pvr = get_pvr();
+
+ /*
+ * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+ * This is board specific, so let's do it here.
+ */
+ mfsdr(SDR0_ETH_CFG, eth_cfg);
+ /* disable SGMII mode */
+ eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
+ SDR0_ETH_CFG_SGMII1_ENABLE |
+ SDR0_ETH_CFG_SGMII0_ENABLE);
+ /* Set the for 2 RGMII mode */
+ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
+ eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ else
+ eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+ /*
+ * The AHB Bridge core is held in reset after power-on or reset
+ * so enable it now
+ */
+ mfsdr(SDR0_SRST1, sdr0_srst1);
+ sdr0_srst1 &= ~SDR0_SRST1_AHB;
+ mtsdr(SDR0_SRST1, sdr0_srst1);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+extern void __ft_board_setup(void *blob, bd_t *bd);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ __ft_board_setup(blob, bd);
+
+ fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
+ "disabled", sizeof("disabled"), 1);
+
+ fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
+ "disabled", sizeof("disabled"), 1);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/gdsys/compactcenter/config.mk b/board/gdsys/compactcenter/config.mk
new file mode 100644
index 0000000000..56e397d77a
--- /dev/null
+++ b/board/gdsys/compactcenter/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# G&D CompactCenter
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/gdsys/compactcenter/init.S b/board/gdsys/compactcenter/init.S
new file mode 100644
index 0000000000..e205c9d7e8
--- /dev/null
+++ b/board/gdsys/compactcenter/init.S
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * Based on board/amcc/canyonlands/init.S
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+ * use the speed up boot process. It is patched after relocation to
+ * enable SA_I
+ */
+ tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
+ 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR,
+ 0, AC_R|AC_W|AC_X|SA_G)
+#endif
+
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
+ AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC,
+ AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for NVRAM */
+ tlbentry(CONFIG_SYS_NVRAM_BASE, SZ_1M, CONFIG_SYS_NVRAM_BASE, 4,
+ AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for UART */
+ tlbentry(CONFIG_SYS_UART_BASE, SZ_16K, CONFIG_SYS_UART_BASE, 4,
+ AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for IO */
+ tlbentry(CONFIG_SYS_IO_BASE, SZ_16K, CONFIG_SYS_IO_BASE, 4,
+ AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for OCM */
+ tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
+ AC_R|AC_W|AC_X|SA_I)
+
+ /* TLB-entry for Local Configuration registers => peripherals */
+ tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS,
+ 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /* AHB: Internal USB Peripherals (USB, SATA) */
+ tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4,
+ AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
diff --git a/board/gdsys/compactcenter/u-boot.lds b/board/gdsys/compactcenter/u-boot.lds
new file mode 100644
index 0000000000..0c95d5c298
--- /dev/null
+++ b/board/gdsys/compactcenter/u-boot.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/gdsys/compactcenter/init.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
OpenPOWER on IntegriCloud