1 files changed, 117 insertions, 0 deletions
diff --git a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h
new file mode 100644
index 0000000000..8527eef447
--- /dev/null
+++ b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h
@@ -0,0 +1,117 @@
+
+/******************************************************************************
+*
+* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved.
+*
+* SPDX-License-Identifier:	GPL-2.0+
+*
+*
+*******************************************************************************/
+/****************************************************************************/
+/**
+*
+* @file ps7_init.h
+*
+* This file can be included in FSBL code
+* to get prototype of ps7_init() function
+* and error codes
+*
+*****************************************************************************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+//typedef unsigned int  u32;
+
+
+/** do we need to make this name more unique ? **/
+//extern u32 ps7_init_data[];
+extern unsigned long  * ps7_ddr_init_data;
+extern unsigned long  * ps7_mio_init_data;
+extern unsigned long  * ps7_pll_init_data;
+extern unsigned long  * ps7_clock_init_data;
+extern unsigned long  * ps7_peripherals_init_data;
+
+
+
+#define OPCODE_EXIT       0U
+#define OPCODE_CLEAR      1U
+#define OPCODE_WRITE      2U
+#define OPCODE_MASKWRITE  3U
+#define OPCODE_MASKPOLL   4U
+#define OPCODE_MASKDELAY  5U
+#define NEW_PS7_ERR_CODE 1
+
+/* Encode number of arguments in last nibble */
+#define EMIT_EXIT()                   ( (OPCODE_EXIT      << 4 ) | 0 )
+#define EMIT_CLEAR(addr)              ( (OPCODE_CLEAR     << 4 ) | 1 ) , addr
+#define EMIT_WRITE(addr,val)          ( (OPCODE_WRITE     << 4 ) | 2 ) , addr, val
+#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val
+#define EMIT_MASKPOLL(addr,mask)      ( (OPCODE_MASKPOLL  << 4 ) | 2 ) , addr, mask
+#define EMIT_MASKDELAY(addr,mask)      ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask
+
+/* Returns codes  of PS7_Init */
+#define PS7_INIT_SUCCESS   (0)    // 0 is success in good old C
+#define PS7_INIT_CORRUPT   (1)    // 1 the data is corrupted, and slcr reg are in corrupted state now
+#define PS7_INIT_TIMEOUT   (2)    // 2 when a poll operation timed out
+#define PS7_POLL_FAILED_DDR_INIT (3)    // 3 when a poll operation timed out for ddr init
+#define PS7_POLL_FAILED_DMA      (4)    // 4 when a poll operation timed out for dma done bit
+#define PS7_POLL_FAILED_PLL      (5)    // 5 when a poll operation timed out for pll sequence init
+
+
+/* Silicon Versions */
+#define PCW_SILICON_VERSION_1 0
+#define PCW_SILICON_VERSION_2 1
+#define PCW_SILICON_VERSION_3 2
+
+/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */
+#define PS7_POST_CONFIG
+
+/* Freq of all peripherals */
+
+#define APU_FREQ  666666687
+#define DDR_FREQ  533333374
+#define DCI_FREQ  10158731
+#define QSPI_FREQ  200000000
+#define SMC_FREQ  10000000
+#define ENET0_FREQ  25000000
+#define ENET1_FREQ  10000000
+#define USB0_FREQ  60000000
+#define USB1_FREQ  60000000
+#define SDIO_FREQ  50000000
+#define UART_FREQ  50000000
+#define SPI_FREQ  10000000
+#define I2C_FREQ  111111115
+#define WDT_FREQ  111111115
+#define TTC_FREQ  50000000
+#define CAN_FREQ  10000000
+#define PCAP_FREQ  200000000
+#define TPIU_FREQ  200000000
+#define FPGA0_FREQ  50000000
+#define FPGA1_FREQ  50000000
+#define FPGA2_FREQ  50000000
+#define FPGA3_FREQ  50000000
+
+
+/* For delay calculation using global registers*/
+#define SCU_GLOBAL_TIMER_COUNT_L32	0xF8F00200
+#define SCU_GLOBAL_TIMER_COUNT_U32	0xF8F00204
+#define SCU_GLOBAL_TIMER_CONTROL	0xF8F00208
+#define SCU_GLOBAL_TIMER_AUTO_INC	0xF8F00218
+
+int ps7_config( unsigned long*);
+int ps7_init();
+int ps7_post_config();
+int ps7_debug();
+char* getPS7MessageInfo(unsigned key);
+
+void perf_start_clock(void);
+void perf_disable_clock(void);
+void perf_reset_clock(void);
+void perf_reset_and_start_timer();
+int get_number_of_cycles_for_delay(unsigned int delay);
+#ifdef __cplusplus
+}
+#endif