diff options
Diffstat (limited to 'board/xilinx/xilinx_enet/xemac_intr_dma.c')
| -rw-r--r-- | board/xilinx/xilinx_enet/xemac_intr_dma.c | 1344 |
1 files changed, 0 insertions, 1344 deletions
diff --git a/board/xilinx/xilinx_enet/xemac_intr_dma.c b/board/xilinx/xilinx_enet/xemac_intr_dma.c deleted file mode 100644 index 567abb42ab..0000000000 --- a/board/xilinx/xilinx_enet/xemac_intr_dma.c +++ /dev/null @@ -1,1344 +0,0 @@ -/****************************************************************************** -* -* Author: Xilinx, Inc. -* -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the -* Free Software Foundation; either version 2 of the License, or (at your -* option) any later version. -* -* -* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A -* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS -* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, -* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE -* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING -* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. -* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO -* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY -* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM -* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND -* FITNESS FOR A PARTICULAR PURPOSE. -* -* -* Xilinx hardware products are not intended for use in life support -* appliances, devices, or systems. Use in such applications is -* expressly prohibited. -* -* -* (c) Copyright 2002-2004 Xilinx Inc. -* All rights reserved. -* -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 675 Mass Ave, Cambridge, MA 02139, USA. -* -******************************************************************************/ -/*****************************************************************************/ -/** -* -* @file xemac_intr_dma.c -* -* Contains functions used in interrupt mode when configured with scatter-gather -* DMA. -* -* The interrupt handler, XEmac_IntrHandlerDma(), must be connected by the user -* to the interrupt controller. -* -* <pre> -* MODIFICATION HISTORY: -* -* Ver Who Date Changes -* ----- ---- -------- --------------------------------------------------------- -* 1.00a rpm 07/31/01 First release -* 1.00b rpm 02/20/02 Repartitioned files and functions -* 1.00c rpm 12/05/02 New version includes support for simple DMA and the delay -* argument to SgSend -* 1.00c rpm 02/03/03 The XST_DMA_SG_COUNT_EXCEEDED return code was removed -* from SetPktThreshold in the internal DMA driver. Also -* avoided compiler warnings by initializing Result in the -* interrupt service routines. -* 1.00c rpm 03/26/03 Fixed a problem in the interrupt service routines where -* the interrupt status was toggled clear after a call to -* ErrorHandler, but if ErrorHandler reset the device the -* toggle actually asserted the interrupt because the -* reset had cleared it. -* </pre> -* -******************************************************************************/ - -/***************************** Include Files *********************************/ - -#include "xbasic_types.h" -#include "xemac_i.h" -#include "xio.h" -#include "xbuf_descriptor.h" -#include "xdma_channel.h" -#include "xipif_v1_23_b.h" /* Uses v1.23b of the IPIF */ - -/************************** Constant Definitions *****************************/ - -/**************************** Type Definitions *******************************/ - -/***************** Macros (Inline Functions) Definitions *********************/ - -/************************** Variable Definitions *****************************/ - -/************************** Function Prototypes ******************************/ - -static void HandleDmaRecvIntr(XEmac * InstancePtr); -static void HandleDmaSendIntr(XEmac * InstancePtr); -static void HandleEmacDmaIntr(XEmac * InstancePtr); - -/*****************************************************************************/ -/** -* -* Send an Ethernet frame using scatter-gather DMA. The caller attaches the -* frame to one or more buffer descriptors, then calls this function once for -* each descriptor. The caller is responsible for allocating and setting up the -* descriptor. An entire Ethernet frame may or may not be contained within one -* descriptor. This function simply inserts the descriptor into the scatter- -* gather engine's transmit list. The caller is responsible for providing mutual -* exclusion to guarantee that a frame is contiguous in the transmit list. The -* buffer attached to the descriptor must be word-aligned. -* -* The driver updates the descriptor with the device control register before -* being inserted into the transmit list. If this is the last descriptor in -* the frame, the inserts are committed, which means the descriptors for this -* frame are now available for transmission. -* -* It is assumed that the upper layer software supplies a correctly formatted -* Ethernet frame, including the destination and source addresses, the -* type/length field, and the data field. It is also assumed that upper layer -* software does not append FCS at the end of the frame. -* -* The buffer attached to the descriptor must be word-aligned on the front end. -* -* This call is non-blocking. Notification of error or successful transmission -* is done asynchronously through the send or error callback function. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param BdPtr is the address of a descriptor to be inserted into the transmit -* ring. -* @param Delay indicates whether to start the scatter-gather DMA channel -* immediately, or whether to wait. This allows the user to build up a -* list of more than one descriptor before starting the transmission of -* the packets, which allows the application to keep up with DMA and have -* a constant stream of frames being transmitted. Use XEM_SGDMA_NODELAY or -* XEM_SGDMA_DELAY, defined in xemac.h, as the value of this argument. If -* the user chooses to delay and build a list, the user must call this -* function with the XEM_SGDMA_NODELAY option or call XEmac_Start() to -* kick off the tranmissions. -* -* @return -* -* - XST_SUCCESS if the buffer was successfull sent -* - XST_DEVICE_IS_STOPPED if the Ethernet MAC has not been started yet -* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode -* - XST_DMA_SG_LIST_FULL if the descriptor list for the DMA channel is full -* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into -* the list because a locked descriptor exists at the insert point -* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the -* list, the DMA channel believes there are no new descriptors to commit. If -* this is ever encountered, there is likely a thread mutual exclusion problem -* on transmit. -* -* @note -* -* This function is not thread-safe. The user must provide mutually exclusive -* access to this function if there are to be multiple threads that can call it. -* -* @internal -* -* A status that should never be returned from this function, although -* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device -* requires a list to be created, and this function requires the device to be -* started. -* -******************************************************************************/ -XStatus -XEmac_SgSend(XEmac * InstancePtr, XBufDescriptor * BdPtr, int Delay) -{ - XStatus Result; - u32 BdControl; - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(BdPtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* - * Be sure the device is configured for scatter-gather DMA, then be sure - * it is started. - */ - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - /* - * Set some descriptor control word defaults (source address increment - * and local destination address) and the destination address - * (the FIFO). These are the same for every transmit descriptor. - */ - BdControl = XBufDescriptor_GetControl(BdPtr); - XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_SEND_BD_MASK); - - XBufDescriptor_SetDestAddress(BdPtr, - InstancePtr->BaseAddress + - XEM_PFIFO_TXDATA_OFFSET); - - /* - * Put the descriptor in the send list. The DMA component accesses data - * here that can also be modified in interrupt context, so a critical - * section is required. - */ - XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); - - Result = XDmaChannel_PutDescriptor(&InstancePtr->SendChannel, BdPtr); - if (Result != XST_SUCCESS) { - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - return Result; - } - - /* - * If this is the last buffer in the frame, commit the inserts and start - * the DMA engine if necessary - */ - if (XBufDescriptor_IsLastControl(BdPtr)) { - Result = XDmaChannel_CommitPuts(&InstancePtr->SendChannel); - if (Result != XST_SUCCESS) { - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - return Result; - } - - if (Delay == XEM_SGDMA_NODELAY) { - /* - * Start the DMA channel. Ignore the return status since we know the - * list exists and has at least one entry and we don't care if the - * channel is already started. The DMA component accesses data here - * that can be modified at interrupt or task levels, so a critical - * section is required. - */ - (void) XDmaChannel_SgStart(&InstancePtr->SendChannel); - } - } - - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - - return XST_SUCCESS; -} - -/*****************************************************************************/ -/** -* -* Add a descriptor, with an attached empty buffer, into the receive descriptor -* list. The buffer attached to the descriptor must be word-aligned. This is -* used by the upper layer software during initialization when first setting up -* the receive descriptors, and also during reception of frames to replace -* filled buffers with empty buffers. This function can be called when the -* device is started or stopped. Note that it does start the scatter-gather DMA -* engine. Although this is not necessary during initialization, it is not a -* problem during initialization because the MAC receiver is not yet started. -* -* The buffer attached to the descriptor must be word-aligned on both the front -* end and the back end. -* -* Notification of received frames are done asynchronously through the receive -* callback function. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param BdPtr is a pointer to the buffer descriptor that will be added to the -* descriptor list. -* -* @return -* -* - XST_SUCCESS if a descriptor was successfully returned to the driver -* - XST_NOT_SGDMA if the device is not in scatter-gather DMA mode -* - XST_DMA_SG_LIST_FULL if the receive descriptor list is full -* - XST_DMA_SG_BD_LOCKED if the DMA channel cannot insert the descriptor into -* the list because a locked descriptor exists at the insert point. -* - XST_DMA_SG_NOTHING_TO_COMMIT if even after inserting a descriptor into the -* list, the DMA channel believes there are no new descriptors to commit. -* -* @internal -* -* A status that should never be returned from this function, although -* the code is set up to handle it, is XST_DMA_SG_NO_LIST. Starting the device -* requires a list to be created, and this function requires the device to be -* started. -* -******************************************************************************/ -XStatus -XEmac_SgRecv(XEmac * InstancePtr, XBufDescriptor * BdPtr) -{ - XStatus Result; - u32 BdControl; - - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(BdPtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* - * Be sure the device is configured for scatter-gather DMA - */ - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - /* - * Set some descriptor control word defaults (destination address increment - * and local source address) and the source address (the FIFO). These are - * the same for every receive descriptor. - */ - BdControl = XBufDescriptor_GetControl(BdPtr); - XBufDescriptor_SetControl(BdPtr, BdControl | XEM_DFT_RECV_BD_MASK); - XBufDescriptor_SetSrcAddress(BdPtr, - InstancePtr->BaseAddress + - XEM_PFIFO_RXDATA_OFFSET); - - /* - * Put the descriptor into the channel's descriptor list and commit. - * Although this function is likely called within interrupt context, there - * is the possibility that the upper layer software queues it to a task. - * In this case, a critical section is needed here to protect shared data - * in the DMA component. - */ - XIIF_V123B_GINTR_DISABLE(InstancePtr->BaseAddress); - - Result = XDmaChannel_PutDescriptor(&InstancePtr->RecvChannel, BdPtr); - if (Result != XST_SUCCESS) { - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - return Result; - } - - Result = XDmaChannel_CommitPuts(&InstancePtr->RecvChannel); - if (Result != XST_SUCCESS) { - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - return Result; - } - - /* - * Start the DMA channel. Ignore the return status since we know the list - * exists and has at least one entry and we don't care if the channel is - * already started. The DMA component accesses data here that can be - * modified at interrupt or task levels, so a critical section is required. - */ - (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel); - - XIIF_V123B_GINTR_ENABLE(InstancePtr->BaseAddress); - - return XST_SUCCESS; -} - -/*****************************************************************************/ -/** -* -* The interrupt handler for the Ethernet driver when configured with scatter- -* gather DMA. -* -* Get the interrupt status from the IpIf to determine the source of the -* interrupt. The source can be: MAC, Recv Packet FIFO, Send Packet FIFO, Recv -* DMA channel, or Send DMA channel. The packet FIFOs only interrupt during -* "deadlock" conditions. -* -* @param InstancePtr is a pointer to the XEmac instance that just interrupted. -* -* @return -* -* None. -* -* @note -* -* None. -* -******************************************************************************/ -void -XEmac_IntrHandlerDma(void *InstancePtr) -{ - u32 IntrStatus; - XEmac *EmacPtr = (XEmac *) InstancePtr; - - EmacPtr->Stats.TotalIntrs++; - - /* - * Get the interrupt status from the IPIF. There is no clearing of - * interrupts in the IPIF. Interrupts must be cleared at the source. - */ - IntrStatus = XIIF_V123B_READ_DIPR(EmacPtr->BaseAddress); - - /* - * See which type of interrupt is being requested, and service it - */ - if (IntrStatus & XEM_IPIF_RECV_DMA_MASK) { /* Receive DMA interrupt */ - EmacPtr->Stats.RecvInterrupts++; - HandleDmaRecvIntr(EmacPtr); - } - - if (IntrStatus & XEM_IPIF_SEND_DMA_MASK) { /* Send DMA interrupt */ - EmacPtr->Stats.XmitInterrupts++; - HandleDmaSendIntr(EmacPtr); - } - - if (IntrStatus & XEM_IPIF_EMAC_MASK) { /* MAC interrupt */ - EmacPtr->Stats.EmacInterrupts++; - HandleEmacDmaIntr(EmacPtr); - } - - if (IntrStatus & XEM_IPIF_RECV_FIFO_MASK) { /* Receive FIFO interrupt */ - EmacPtr->Stats.RecvInterrupts++; - XEmac_CheckFifoRecvError(EmacPtr); - } - - if (IntrStatus & XEM_IPIF_SEND_FIFO_MASK) { /* Send FIFO interrupt */ - EmacPtr->Stats.XmitInterrupts++; - XEmac_CheckFifoSendError(EmacPtr); - } - - if (IntrStatus & XIIF_V123B_ERROR_MASK) { - /* - * An error occurred internal to the IPIF. This is more of a debug and - * integration issue rather than a production error. Don't do anything - * other than clear it, which provides a spot for software to trap - * on the interrupt and begin debugging. - */ - XIIF_V123B_WRITE_DISR(EmacPtr->BaseAddress, - XIIF_V123B_ERROR_MASK); - } -} - -/*****************************************************************************/ -/** -* -* Set the packet count threshold for this device. The device must be stopped -* before setting the threshold. The packet count threshold is used for interrupt -* coalescing, which reduces the frequency of interrupts from the device to the -* processor. In this case, the scatter-gather DMA engine only interrupts when -* the packet count threshold is reached, instead of interrupting for each packet. -* A packet is a generic term used by the scatter-gather DMA engine, and is -* equivalent to an Ethernet frame in our case. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param Direction indicates the channel, send or receive, from which the -* threshold register is read. -* @param Threshold is the value of the packet threshold count used during -* interrupt coalescing. A value of 0 disables the use of packet threshold -* by the hardware. -* -* @return -* -* - XST_SUCCESS if the threshold was successfully set -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_DEVICE_IS_STARTED if the device has not been stopped -* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on -* asserts would also catch this error. -* -* @note -* -* The packet threshold could be set to larger than the number of descriptors -* allocated to the DMA channel. In this case, the wait bound will take over -* and always indicate data arrival. There was a check in this function that -* returned an error if the treshold was larger than the number of descriptors, -* but that was removed because users would then have to set the threshold -* only after they set descriptor space, which is an order dependency that -* caused confustion. -* -******************************************************************************/ -XStatus -XEmac_SetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 Threshold) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* - * Be sure device is configured for scatter-gather DMA and has been stopped - */ - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { - return XST_DEVICE_IS_STARTED; - } - - /* - * Based on the direction, set the packet threshold in the - * corresponding DMA channel component. Default to the receive - * channel threshold register (if an invalid Direction is passed). - */ - switch (Direction) { - case XEM_SEND: - return XDmaChannel_SetPktThreshold(&InstancePtr->SendChannel, - Threshold); - - case XEM_RECV: - return XDmaChannel_SetPktThreshold(&InstancePtr->RecvChannel, - Threshold); - - default: - return XST_INVALID_PARAM; - } -} - -/*****************************************************************************/ -/** -* -* Get the value of the packet count threshold for this driver/device. The packet -* count threshold is used for interrupt coalescing, which reduces the frequency -* of interrupts from the device to the processor. In this case, the -* scatter-gather DMA engine only interrupts when the packet count threshold is -* reached, instead of interrupting for each packet. A packet is a generic term -* used by the scatter-gather DMA engine, and is equivalent to an Ethernet frame -* in our case. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param Direction indicates the channel, send or receive, from which the -* threshold register is read. -* @param ThreshPtr is a pointer to the byte into which the current value of the -* packet threshold register will be copied. An output parameter. A value -* of 0 indicates the use of packet threshold by the hardware is disabled. -* -* @return -* -* - XST_SUCCESS if the packet threshold was retrieved successfully -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on -* asserts would also catch this error. -* -* @note -* -* None. -* -******************************************************************************/ -XStatus -XEmac_GetPktThreshold(XEmac * InstancePtr, u32 Direction, u8 * ThreshPtr) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); - XASSERT_NONVOID(ThreshPtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - /* - * Based on the direction, return the packet threshold set in the - * corresponding DMA channel component. Default to the value in - * the receive channel threshold register (if an invalid Direction - * is passed). - */ - switch (Direction) { - case XEM_SEND: - *ThreshPtr = - XDmaChannel_GetPktThreshold(&InstancePtr->SendChannel); - break; - - case XEM_RECV: - *ThreshPtr = - XDmaChannel_GetPktThreshold(&InstancePtr->RecvChannel); - break; - - default: - return XST_INVALID_PARAM; - } - - return XST_SUCCESS; -} - -/*****************************************************************************/ -/** -* -* Set the packet wait bound timer for this driver/device. The device must be -* stopped before setting the timer value. The packet wait bound is used during -* interrupt coalescing to trigger an interrupt when not enough packets have been -* received to reach the packet count threshold. A packet is a generic term used -* by the scatter-gather DMA engine, and is equivalent to an Ethernet frame in -* our case. The timer is in milliseconds. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param Direction indicates the channel, send or receive, from which the -* threshold register is read. -* @param TimerValue is the value of the packet wait bound used during interrupt -* coalescing. It is in milliseconds in the range 0 - 1023. A value of 0 -* disables the packet wait bound timer. -* -* @return -* -* - XST_SUCCESS if the packet wait bound was set successfully -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_DEVICE_IS_STARTED if the device has not been stopped -* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on -* asserts would also catch this error. -* -* @note -* -* None. -* -******************************************************************************/ -XStatus -XEmac_SetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 TimerValue) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); - XASSERT_NONVOID(TimerValue <= XEM_SGDMA_MAX_WAITBOUND); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - /* - * Be sure device is configured for scatter-gather DMA and has been stopped - */ - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - if (InstancePtr->IsStarted == XCOMPONENT_IS_STARTED) { - return XST_DEVICE_IS_STARTED; - } - - /* - * Based on the direction, set the packet wait bound in the - * corresponding DMA channel component. Default to the receive - * channel wait bound register (if an invalid Direction is passed). - */ - switch (Direction) { - case XEM_SEND: - XDmaChannel_SetPktWaitBound(&InstancePtr->SendChannel, - TimerValue); - break; - - case XEM_RECV: - XDmaChannel_SetPktWaitBound(&InstancePtr->RecvChannel, - TimerValue); - break; - - default: - return XST_INVALID_PARAM; - } - - return XST_SUCCESS; -} - -/*****************************************************************************/ -/** -* -* Get the packet wait bound timer for this driver/device. The packet wait bound -* is used during interrupt coalescing to trigger an interrupt when not enough -* packets have been received to reach the packet count threshold. A packet is a -* generic term used by the scatter-gather DMA engine, and is equivalent to an -* Ethernet frame in our case. The timer is in milliseconds. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param Direction indicates the channel, send or receive, from which the -* threshold register is read. -* @param WaitPtr is a pointer to the byte into which the current value of the -* packet wait bound register will be copied. An output parameter. Units -* are in milliseconds in the range 0 - 1023. A value of 0 indicates the -* packet wait bound timer is disabled. -* -* @return -* -* - XST_SUCCESS if the packet wait bound was retrieved successfully -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_INVALID_PARAM if the Direction parameter is invalid. Turning on -* asserts would also catch this error. -* -* @note -* -* None. -* -******************************************************************************/ -XStatus -XEmac_GetPktWaitBound(XEmac * InstancePtr, u32 Direction, u32 * WaitPtr) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(Direction == XEM_SEND || Direction == XEM_RECV); - XASSERT_NONVOID(WaitPtr != NULL); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - /* - * Based on the direction, return the packet wait bound set in the - * corresponding DMA channel component. Default to the value in - * the receive channel wait bound register (if an invalid Direction - * is passed). - */ - switch (Direction) { - case XEM_SEND: - *WaitPtr = - XDmaChannel_GetPktWaitBound(&InstancePtr->SendChannel); - break; - - case XEM_RECV: - *WaitPtr = - XDmaChannel_GetPktWaitBound(&InstancePtr->RecvChannel); - break; - - default: - return XST_INVALID_PARAM; - } - - return XST_SUCCESS; -} - -/*****************************************************************************/ -/** -* -* Give the driver the memory space to be used for the scatter-gather DMA -* receive descriptor list. This function should only be called once, during -* initialization of the Ethernet driver. The memory space must be big enough -* to hold some number of descriptors, depending on the needs of the system. -* The xemac.h file defines minimum and default numbers of descriptors -* which can be used to allocate this memory space. -* -* The memory space must be word-aligned. An assert will occur if asserts are -* turned on and the memory is not word-aligned. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param MemoryPtr is a pointer to the word-aligned memory. -* @param ByteCount is the length, in bytes, of the memory space. -* -* @return -* -* - XST_SUCCESS if the space was initialized successfully -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_DMA_SG_LIST_EXISTS if this list space has already been created -* -* @note -* -* If the device is configured for scatter-gather DMA, this function must be -* called AFTER the XEmac_Initialize() function because the DMA channel -* components must be initialized before the memory space is set. -* -******************************************************************************/ -XStatus -XEmac_SetSgRecvSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(MemoryPtr != NULL); - XASSERT_NONVOID(ByteCount != 0); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - return XDmaChannel_CreateSgList(&InstancePtr->RecvChannel, MemoryPtr, - ByteCount); -} - -/*****************************************************************************/ -/** -* -* Give the driver the memory space to be used for the scatter-gather DMA -* transmit descriptor list. This function should only be called once, during -* initialization of the Ethernet driver. The memory space must be big enough -* to hold some number of descriptors, depending on the needs of the system. -* The xemac.h file defines minimum and default numbers of descriptors -* which can be used to allocate this memory space. -* -* The memory space must be word-aligned. An assert will occur if asserts are -* turned on and the memory is not word-aligned. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param MemoryPtr is a pointer to the word-aligned memory. -* @param ByteCount is the length, in bytes, of the memory space. -* -* @return -* -* - XST_SUCCESS if the space was initialized successfully -* - XST_NOT_SGDMA if the MAC is not configured for scatter-gather DMA -* - XST_DMA_SG_LIST_EXISTS if this list space has already been created -* -* @note -* -* If the device is configured for scatter-gather DMA, this function must be -* called AFTER the XEmac_Initialize() function because the DMA channel -* components must be initialized before the memory space is set. -* -******************************************************************************/ -XStatus -XEmac_SetSgSendSpace(XEmac * InstancePtr, u32 * MemoryPtr, u32 ByteCount) -{ - XASSERT_NONVOID(InstancePtr != NULL); - XASSERT_NONVOID(MemoryPtr != NULL); - XASSERT_NONVOID(ByteCount != 0); - XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - if (!XEmac_mIsSgDma(InstancePtr)) { - return XST_NOT_SGDMA; - } - - return XDmaChannel_CreateSgList(&InstancePtr->SendChannel, MemoryPtr, - ByteCount); -} - -/*****************************************************************************/ -/** -* -* Set the callback function for handling received frames in scatter-gather DMA -* mode. The upper layer software should call this function during -* initialization. The callback is called once per frame received. The head of -* a descriptor list is passed in along with the number of descriptors in the -* list. Before leaving the callback, the upper layer software should attach a -* new buffer to each descriptor in the list. -* -* The callback is invoked by the driver within interrupt context, so it needs -* to do its job quickly. Sending the received frame up the protocol stack -* should be done at task-level. If there are other potentially slow operations -* within the callback, these too should be done at task-level. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param CallBackRef is a reference pointer to be passed back to the adapter in -* the callback. This helps the adapter correlate the callback to a -* particular driver. -* @param FuncPtr is the pointer to the callback function. -* -* @return -* -* None. -* -* @note -* -* None. -* -******************************************************************************/ -void -XEmac_SetSgRecvHandler(XEmac * InstancePtr, void *CallBackRef, - XEmac_SgHandler FuncPtr) -{ - /* - * Asserted IsDmaSg here instead of run-time check because there is really - * no ill-effects of setting these when not configured for scatter-gather. - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(FuncPtr != NULL); - XASSERT_VOID(XEmac_mIsSgDma(InstancePtr)); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - InstancePtr->SgRecvHandler = FuncPtr; - InstancePtr->SgRecvRef = CallBackRef; -} - -/*****************************************************************************/ -/** -* -* Set the callback function for handling confirmation of transmitted frames in -* scatter-gather DMA mode. The upper layer software should call this function -* during initialization. The callback is called once per frame sent. The head -* of a descriptor list is passed in along with the number of descriptors in -* the list. The callback is responsible for freeing buffers attached to these -* descriptors. -* -* The callback is invoked by the driver within interrupt context, so it needs -* to do its job quickly. If there are potentially slow operations within the -* callback, these should be done at task-level. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* @param CallBackRef is a reference pointer to be passed back to the adapter in -* the callback. This helps the adapter correlate the callback to a -* particular driver. -* @param FuncPtr is the pointer to the callback function. -* -* @return -* -* None. -* -* @note -* -* None. -* -******************************************************************************/ -void -XEmac_SetSgSendHandler(XEmac * InstancePtr, void *CallBackRef, - XEmac_SgHandler FuncPtr) -{ - /* - * Asserted IsDmaSg here instead of run-time check because there is really - * no ill-effects of setting these when not configured for scatter-gather. - */ - XASSERT_VOID(InstancePtr != NULL); - XASSERT_VOID(FuncPtr != NULL); - XASSERT_VOID(XEmac_mIsSgDma(InstancePtr)); - XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY); - - InstancePtr->SgSendHandler = FuncPtr; - InstancePtr->SgSendRef = CallBackRef; -} - -/*****************************************************************************/ -/* -* -* Handle an interrupt from the DMA receive channel. DMA interrupts are: -* -* - DMA error. DMA encountered a bus error or timeout. This is a fatal error -* that requires reset of the channel. The driver calls the error handler -* of the upper layer software with an error code indicating the device should -* be reset. -* - Packet count threshold reached. For scatter-gather operations, indicates -* the threshold for the number of packets not serviced by software has been -* reached. The driver behaves as follows: -* - Get the value of the packet counter, which tells us how many packets -* are ready to be serviced -* - For each packet -* - For each descriptor, remove it from the scatter-gather list -* - Check for the last descriptor in the frame, and if set -* - Bump frame statistics -* - Call the scatter-gather receive callback function -* - Decrement the packet counter by one -* Note that there are no receive errors reported in the status word of -* the buffer descriptor. If receive errors occur, the MAC drops the -* packet, and we only find out about the errors through various error -* count registers. -* - Packet wait bound reached. For scatter-gather, indicates the time to wait -* for the next packet has expired. The driver follows the same logic as when -* the packet count threshold interrupt is received. -* - Scatter-gather end acknowledge. Hardware has reached the end of the -* descriptor list. The driver follows the same logic as when the packet count -* threshold interrupt is received. In addition, the driver restarts the DMA -* scatter-gather channel in case there are newly inserted descriptors. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* -* @return -* -* Although the function returns void, there are asynchronous errors that can -* be generated (by calling the ErrorHandler) from this function. These are: -* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from the -* DMA channel, but there was not one ready for software. -* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a fatal -* error that requires reset. -* -* @note -* -* None. -* -******************************************************************************/ -static void -HandleDmaRecvIntr(XEmac * InstancePtr) -{ - u32 IntrStatus; - - /* - * Read the interrupt status - */ - IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->RecvChannel); - - /* - * For packet threshold or wait bound interrupts, process desciptors. Also - * process descriptors on a SG end acknowledgement, which means the end of - * the descriptor list has been reached by the hardware. For receive, this - * is potentially trouble since it means the descriptor list is full, - * unless software can process enough packets quickly enough so the - * hardware has room to put new packets. - */ - if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK | - XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) { - XStatus Result = XST_SUCCESS; - u32 NumFrames; - u32 NumProcessed; - u32 NumBuffers; - u32 NumBytes; - u32 IsLast; - XBufDescriptor *FirstBdPtr; - XBufDescriptor *BdPtr; - - /* - * Get the number of unserviced packets - */ - NumFrames = XDmaChannel_GetPktCount(&InstancePtr->RecvChannel); - - for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) { - IsLast = FALSE; - FirstBdPtr = NULL; - NumBuffers = 0; - NumBytes = 0; - - /* - * For each packet, get the descriptor from the list. On the - * last one in the frame, make the callback to the upper layer. - */ - while (!IsLast) { - Result = - XDmaChannel_GetDescriptor(&InstancePtr-> - RecvChannel, - &BdPtr); - if (Result != XST_SUCCESS) { - /* - * An error getting a buffer descriptor from the list. - * This should not happen, but if it does, report it to - * the error callback and break out of the loops to service - * other interrupts. - */ - InstancePtr->ErrorHandler(InstancePtr-> - ErrorRef, - Result); - break; - } - - /* - * Keep a pointer to the first descriptor in the list, as it - * will be passed to the upper layers in a bit. By the fact - * that we received this packet means no errors occurred, so - * no need to check the device status word for errors. - */ - if (FirstBdPtr == NULL) { - FirstBdPtr = BdPtr; - } - - NumBytes += XBufDescriptor_GetLength(BdPtr); - - /* - * Check to see if this is the last descriptor in the frame, - * and if so, set the IsLast flag to get out of the loop. - */ - if (XBufDescriptor_IsLastStatus(BdPtr)) { - IsLast = TRUE; - } - - /* - * Bump the number of buffers in this packet - */ - NumBuffers++; - - } /* end while loop */ - - /* - * Check for error that occurred inside the while loop, and break - * out of the for loop if there was one so other interrupts can - * be serviced. - */ - if (Result != XST_SUCCESS) { - break; - } - - InstancePtr->Stats.RecvFrames++; - InstancePtr->Stats.RecvBytes += NumBytes; - - /* - * Make the callback to the upper layers, passing it the first - * descriptor in the packet and the number of descriptors in the - * packet. - */ - InstancePtr->SgRecvHandler(InstancePtr->SgRecvRef, - FirstBdPtr, NumBuffers); - - /* - * Decrement the packet count register to reflect the fact we - * just processed a packet - */ - XDmaChannel_DecrementPktCount(&InstancePtr-> - RecvChannel); - - } /* end for loop */ - - /* - * If the interrupt was an end-ack, check the descriptor list again to - * see if it is empty. If not, go ahead and restart the scatter-gather - * channel. This is to fix a possible race condition where, on receive, - * the driver attempted to start a scatter-gather channel that was - * already started, which resulted in no action from the XDmaChannel - * component. But, just after the XDmaChannel component saw that the - * hardware was already started, the hardware stopped because it - * reached the end of the list. In that case, this interrupt is - * generated and we can restart the hardware here. - */ - if (IntrStatus & XDC_IXR_SG_END_MASK) { - /* - * Ignore the return status since we know the list exists and we - * don't care if the list is empty or the channel is already started. - */ - (void) XDmaChannel_SgStart(&InstancePtr->RecvChannel); - } - } - - /* - * All interrupts are handled (except the error below) so acknowledge - * (clear) the interrupts by writing the value read above back to the status - * register. The packet count interrupt must be acknowledged after the - * decrement, otherwise it will come right back. We clear the interrupts - * before we handle the error interrupt because the ErrorHandler should - * result in a reset, which clears the interrupt status register. So we - * don't want to toggle the interrupt back on by writing the interrupt - * status register with an old value after a reset. - */ - XDmaChannel_SetIntrStatus(&InstancePtr->RecvChannel, IntrStatus); - - /* - * Check for DMA errors and call the error callback function if an error - * occurred (DMA bus or timeout error), which should result in a reset of - * the device by the upper layer software. - */ - if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) { - InstancePtr->Stats.DmaErrors++; - InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR); - } -} - -/*****************************************************************************/ -/* -* -* Handle an interrupt from the DMA send channel. DMA interrupts are: -* -* - DMA error. DMA encountered a bus error or timeout. This is a fatal error -* that requires reset of the channel. The driver calls the error handler -* of the upper layer software with an error code indicating the device should -* be reset. -* - Packet count threshold reached. For scatter-gather operations, indicates -* the threshold for the number of packets not serviced by software has been -* reached. The driver behaves as follows: -* - Get the value of the packet counter, which tells us how many packets -* are ready to be serviced -* - For each packet -* - For each descriptor, remove it from the scatter-gather list -* - Check for the last descriptor in the frame, and if set -* - Bump frame statistics -* - Call the scatter-gather receive callback function -* - Decrement the packet counter by one -* Note that there are no receive errors reported in the status word of -* the buffer descriptor. If receive errors occur, the MAC drops the -* packet, and we only find out about the errors through various error -* count registers. -* - Packet wait bound reached. For scatter-gather, indicates the time to wait -* for the next packet has expired. The driver follows the same logic as when -* the packet count threshold interrupt is received. -* - Scatter-gather end acknowledge. Hardware has reached the end of the -* descriptor list. The driver follows the same logic as when the packet count -* threshold interrupt is received. In addition, the driver restarts the DMA -* scatter-gather channel in case there are newly inserted descriptors. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* -* @return -* -* Although the function returns void, there are asynchronous errors -* that can be generated from this function. These are: -* - XST_DMA_SG_LIST_EMPTY indicates we tried to get a buffer descriptor from -* the DMA channel, but there was not one ready for software. -* - XST_DMA_ERROR indicates a DMA bus error or timeout occurred. This is a -* fatal error that requires reset. -* -* @note -* -* None. -* -******************************************************************************/ -static void -HandleDmaSendIntr(XEmac * InstancePtr) -{ - u32 IntrStatus; - - /* - * Read the interrupt status - */ - IntrStatus = XDmaChannel_GetIntrStatus(&InstancePtr->SendChannel); - - /* - * For packet threshold or wait bound interrupt, process descriptors. Also - * process descriptors on a SG end acknowledgement, which means the end of - * the descriptor list has been reached by the hardware. For transmit, - * this is a normal condition during times of light traffic. In fact, the - * wait bound interrupt may be masked for transmit since the end-ack would - * always occur before the wait bound expires. - */ - if (IntrStatus & (XDC_IXR_PKT_THRESHOLD_MASK | - XDC_IXR_PKT_WAIT_BOUND_MASK | XDC_IXR_SG_END_MASK)) { - XStatus Result = XST_SUCCESS; - u32 NumFrames; - u32 NumProcessed; - u32 NumBuffers; - u32 NumBytes; - u32 IsLast; - XBufDescriptor *FirstBdPtr; - XBufDescriptor *BdPtr; - - /* - * Get the number of unserviced packets - */ - NumFrames = XDmaChannel_GetPktCount(&InstancePtr->SendChannel); - - for (NumProcessed = 0; NumProcessed < NumFrames; NumProcessed++) { - IsLast = FALSE; - FirstBdPtr = NULL; - NumBuffers = 0; - NumBytes = 0; - - /* - * For each frame, traverse the descriptor list and look for - * errors. On the last one in the frame, make the callback. - */ - while (!IsLast) { - Result = - XDmaChannel_GetDescriptor(&InstancePtr-> - SendChannel, - &BdPtr); - if (Result != XST_SUCCESS) { - /* - * An error getting a buffer descriptor from the list. - * This should not happen, but if it does, report it to - * the error callback and break out of the loops to service - * other interrupts - */ - InstancePtr->ErrorHandler(InstancePtr-> - ErrorRef, - Result); - break; - } - - /* - * Keep a pointer to the first descriptor in the list and - * check the device status for errors. The device status is - * only available in the first descriptor of a packet. - */ - if (FirstBdPtr == NULL) { - u32 XmitStatus; - - FirstBdPtr = BdPtr; - - XmitStatus = - XBufDescriptor_GetDeviceStatus - (BdPtr); - if (XmitStatus & - XEM_TSR_EXCESS_DEFERRAL_MASK) { - InstancePtr->Stats. - XmitExcessDeferral++; - } - - if (XmitStatus & - XEM_TSR_LATE_COLLISION_MASK) { - InstancePtr->Stats. - XmitLateCollisionErrors++; - } - } - - NumBytes += XBufDescriptor_GetLength(BdPtr); - - /* - * Check to see if this is the last descriptor in the frame, - * and if so, set the IsLast flag to get out of the loop. The - * transmit channel must check the last bit in the control - * word, not the status word (the DMA engine does not update - * the last bit in the status word for the transmit direction). - */ - if (XBufDescriptor_IsLastControl(BdPtr)) { - IsLast = TRUE; - } - - /* - * Bump the number of buffers in this packet - */ - NumBuffers++; - - } /* end while loop */ - - /* - * Check for error that occurred inside the while loop, and break - * out of the for loop if there was one so other interrupts can - * be serviced. - */ - if (Result != XST_SUCCESS) { - break; - } - - InstancePtr->Stats.XmitFrames++; - InstancePtr->Stats.XmitBytes += NumBytes; - - /* - * Make the callback to the upper layers, passing it the first - * descriptor in the packet and the number of descriptors in the - * packet. - */ - InstancePtr->SgSendHandler(InstancePtr->SgSendRef, - FirstBdPtr, NumBuffers); - - /* - * Decrement the packet count register to reflect the fact we - * just processed a packet - */ - XDmaChannel_DecrementPktCount(&InstancePtr-> - SendChannel); - - } /* end for loop */ - - /* - * If the interrupt was an end-ack, check the descriptor list again to - * see if it is empty. If not, go ahead and restart the scatter-gather - * channel. This is to fix a possible race condition where, on transmit, - * the driver attempted to start a scatter-gather channel that was - * already started, which resulted in no action from the XDmaChannel - * component. But, just after the XDmaChannel component saw that the - * hardware was already started, the hardware stopped because it - * reached the end of the list. In that case, this interrupt is - * generated and we can restart the hardware here. - */ - if (IntrStatus & XDC_IXR_SG_END_MASK) { - /* - * Ignore the return status since we know the list exists and we - * don't care if the list is empty or the channel is already started. - */ - (void) XDmaChannel_SgStart(&InstancePtr->SendChannel); - } - } - - /* - * All interrupts are handled (except the error below) so acknowledge - * (clear) the interrupts by writing the value read above back to the status - * register. The packet count interrupt must be acknowledged after the - * decrement, otherwise it will come right back. We clear the interrupts - * before we handle the error interrupt because the ErrorHandler should - * result in a reset, which clears the interrupt status register. So we - * don't want to toggle the interrupt back on by writing the interrupt - * status register with an old value after a reset. - */ - XDmaChannel_SetIntrStatus(&InstancePtr->SendChannel, IntrStatus); - - /* - * Check for DMA errors and call the error callback function if an error - * occurred (DMA bus or timeout error), which should result in a reset of - * the device by the upper layer software. - */ - if (IntrStatus & XDC_IXR_DMA_ERROR_MASK) { - InstancePtr->Stats.DmaErrors++; - InstancePtr->ErrorHandler(InstancePtr->ErrorRef, XST_DMA_ERROR); - } -} - -/*****************************************************************************/ -/* -* -* Handle an interrupt from the Ethernet MAC when configured with scatter-gather -* DMA. The only interrupts handled in this case are errors. -* -* @param InstancePtr is a pointer to the XEmac instance to be worked on. -* -* @return -* -* None. -* -* @note -* -* None. -* -******************************************************************************/ -static void -HandleEmacDmaIntr(XEmac * InstancePtr) -{ - u32 IntrStatus; - - /* - * When configured with DMA, the EMAC generates interrupts only when errors - * occur. We clear the interrupts immediately so that any latched status - * interrupt bits will reflect the true status of the device, and so any - * pulsed interrupts (non-status) generated during the Isr will not be lost. - */ - IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress); - XIIF_V123B_WRITE_IISR(InstancePtr->BaseAddress, IntrStatus); - - /* - * Check the MAC for errors - */ - XEmac_CheckEmacError(InstancePtr, IntrStatus); -} |
