diff options
Diffstat (limited to 'board/ti/omap1610inn/omap1610innovator.c')
| -rw-r--r-- | board/ti/omap1610inn/omap1610innovator.c | 309 |
1 files changed, 0 insertions, 309 deletions
diff --git a/board/ti/omap1610inn/omap1610innovator.c b/board/ti/omap1610inn/omap1610innovator.c deleted file mode 100644 index 16e823766a..0000000000 --- a/board/ti/omap1610inn/omap1610innovator.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#if defined(CONFIG_OMAP1610) -#include <./configs/omap1510.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CS_AUTOBOOT -unsigned long omap_flash_base; -#endif - -void flash__init (void); -void ether__init (void); -void set_muxconf_regs (void); -void peripheral_power_enable (void); - -#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - /* Configure MUX settings */ - set_muxconf_regs (); - peripheral_power_enable (); - -/* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - return 0; -} - - -int misc_init_r (void) -{ - /* currently empty */ - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ -#define EMIFS_GlB_Config_REG 0xfffecc0c - unsigned int regval; - -#ifdef CONFIG_CS_AUTOBOOT - /* Check swapping of CS0 and CS3, set flash base accordingly */ - omap_flash_base = ((*((u32 *)OMAP_EMIFS_CONFIG_REG) & 0x02) == 0) ? - PHYS_FLASH_1_BM0 : PHYS_FLASH_1_BM1; -#endif - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - /* Turn off write protection for flash devices. */ - regval = regval | 0x0001; - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0400030b - -#ifdef CONFIG_H2_OMAP1610 - #define LAN_RESET_REGISTER 0x0400001c - - /* The debug board on which the lan chip resides may not be powered - * ON at the same time as the OMAP chip. So wait in a loop until the - * lan reset register (on the debug board) is available (powered on) - * and reset the lan chip. - */ - - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; - do { - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001; - udelay (3); - } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001); - - do { - *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; - udelay (3); - } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000); -#endif - - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -/****************************************************** - Routine: set_muxconf_regs - Description: Setting up the configuration Mux registers - specific to the hardware -*******************************************************/ -void set_muxconf_regs (void) -{ - volatile unsigned int *MuxConfReg; - /* set each registers to its reset value; */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); - /* setup for UART1 */ - *MuxConfReg &= ~(0x02000000); /* bit 25 */ - /* setup for UART2 */ - *MuxConfReg &= ~(0x01000000); /* bit 24 */ - /* Disable Uwire CS Hi-Z */ - *MuxConfReg |= 0x08000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6); - /*setup mux for UART3 */ - *MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */ - *MuxConfReg &= ~0x0000003e; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8); - /* Disable Uwire CS Hi-Z */ - *MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9); - /* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */ - /* hardware will actually use TX and RTS based on bit 25 in */ - /* FUNC_MUX_CTRL_0. I told you this thing was screwy! */ - *MuxConfReg |= 0x00201000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C); - /* setup for UART2 */ - /* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */ - /* hardware will actually use TX and RTS based on bit 24 in */ - /* FUNC_MUX_CTRL_0. */ - *MuxConfReg |= 0x09000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1); - *MuxConfReg = 0x00000000; - /* mux setup for SD/MMC driver */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2); - *MuxConfReg &= 0xFFFE0FFF; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - /* bit 13 for MMC2 XOR_CLK */ - *MuxConfReg &= ~(0x00002000); - /* bit 29 for UART 1 */ - *MuxConfReg &= ~(0x00002000); - MuxConfReg = - (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0); - /* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */ - *MuxConfReg |= 0x000C0000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL); - *MuxConfReg &= ~(0x00000070); - *MuxConfReg &= ~(0x00000008); - *MuxConfReg |= 0x00000003; - *MuxConfReg |= 0x00000180; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - /* bit 17, software controls VBUS */ - *MuxConfReg &= ~(0x00020000); - /* Enable USB 48 and 12M clocks */ - *MuxConfReg |= 0x00000200; - *MuxConfReg &= ~(0x00000180); - /*2.75V for MMCSDIO1 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0); - *MuxConfReg = 0x00001FE7; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_0); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_1); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_3); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_4); - *MuxConfReg = 0x00000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4); - *MuxConfReg = 0x00000000; - /* Turn on UART2 48 MHZ clock */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0); - *MuxConfReg |= 0x40000000; - MuxConfReg = - (volatile unsigned int *) ((unsigned int) USB_OTG_CTRL); - /* setup for USB VBus detection OMAP161x */ - *MuxConfReg |= 0x00040000; /* bit 18 */ - MuxConfReg = - (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2); - /* PullUps for SD/MMC driver */ - *MuxConfReg |= ~(0xFFFE0FFF); - MuxConfReg = - (volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0); - *MuxConfReg = COMP_MODE_ENABLE; -} - -/****************************************************** - Routine: peripheral_power_enable - Description: Enable the power for UART1 -*******************************************************/ -void peripheral_power_enable (void) -{ -#define UART1_48MHZ_ENABLE ((unsigned short)0x0200) -#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834) - - *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif |
