diff options
Diffstat (limited to 'board/ti/beagle/beagle.c')
| -rw-r--r-- | board/ti/beagle/beagle.c | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index c5d6679f48..d9b6f01163 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -39,6 +39,27 @@ #include <asm/mach-types.h> #include "beagle.h" +#define TWL4030_I2C_BUS 0 +#define EXPANSION_EEPROM_I2C_BUS 1 +#define EXPANSION_EEPROM_I2C_ADDRESS 0x50 + +#define TINCANTOOLS_ZIPPY 0x01000100 +#define TINCANTOOLS_ZIPPY2 0x02000100 +#define TINCANTOOLS_TRAINER 0x04000100 +#define TINCANTOOLS_SHOWDOG 0x03000100 +#define KBADC_BEAGLEFPGA 0x01000600 + +#define BEAGLE_NO_EEPROM 0xffffffff + +static struct { + unsigned int device_vendor; + unsigned char revision; + unsigned char content; + char fab_revision[8]; + char env_var[16]; + char env_setting[64]; +} expansion_config; + /* * Routine: board_init * Description: Early hardware init. @@ -95,6 +116,31 @@ int get_board_revision(void) } /* + * Routine: get_expansion_id + * Description: This function checks for expansion board by checking I2C + * bus 1 for the availability of an AT24C01B serial EEPROM. + * returns the device_vendor field from the EEPROM + */ +unsigned int get_expansion_id(void) +{ + i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); + + /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ + if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { + i2c_set_bus_num(TWL4030_I2C_BUS); + return BEAGLE_NO_EEPROM; + } + + /* read configuration data */ + i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, + sizeof(expansion_config)); + + i2c_set_bus_num(TWL4030_I2C_BUS); + + return expansion_config.device_vendor; +} + +/* * Routine: misc_init_r * Description: Configure board specific parts */ @@ -141,6 +187,55 @@ int misc_init_r(void) printf("Beagle unknown 0x%02x\n", get_board_revision()); } + switch (get_expansion_id()) { + case TINCANTOOLS_ZIPPY: + printf("Recognized Tincantools Zippy board (rev %d %s)\n", + expansion_config.revision, + expansion_config.fab_revision); + MUX_TINCANTOOLS_ZIPPY(); + setenv("buddy", "zippy"); + break; + case TINCANTOOLS_ZIPPY2: + printf("Recognized Tincantools Zippy2 board (rev %d %s)\n", + expansion_config.revision, + expansion_config.fab_revision); + MUX_TINCANTOOLS_ZIPPY(); + setenv("buddy", "zippy2"); + break; + case TINCANTOOLS_TRAINER: + printf("Recognized Tincantools Trainer board (rev %d %s)\n", + expansion_config.revision, + expansion_config.fab_revision); + MUX_TINCANTOOLS_ZIPPY(); + MUX_TINCANTOOLS_TRAINER(); + setenv("buddy", "trainer"); + break; + case TINCANTOOLS_SHOWDOG: + printf("Recognized Tincantools Showdow board (rev %d %s)\n", + expansion_config.revision, + expansion_config.fab_revision); + /* Place holder for DSS2 definition for showdog lcd */ + setenv("defaultdisplay", "showdoglcd"); + setenv("buddy", "showdog"); + break; + case KBADC_BEAGLEFPGA: + printf("Recognized KBADC Beagle FPGA board\n"); + MUX_KBADC_BEAGLEFPGA(); + setenv("buddy", "beaglefpga"); + break; + case BEAGLE_NO_EEPROM: + printf("No EEPROM on expansion board\n"); + setenv("buddy", "none"); + break; + default: + printf("Unrecognized expansion board: %x\n", + expansion_config.device_vendor); + setenv("buddy", "unknown"); + } + + if (expansion_config.content == 1) + setenv(expansion_config.env_var, expansion_config.env_setting); + twl4030_power_init(); twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); |
