1 files changed, 101 insertions, 0 deletions
diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c
new file mode 100644
index 0000000000..42b7c23f06
--- /dev/null
+++ b/board/sysam/amcore/amcore.c
@@ -0,0 +1,101 @@
+/*
+ * Board functions for Sysam AMCORE (MCF5307 based) board
+ *
+ * (C) Copyright 2015  Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ *
+ * This file copies memory testdram() from sandburst/common/sb_common.c
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+
+void init_lcd(void)
+{
+	/* setup for possible K0108 lcd connected on the parallel port */
+	sim_t *sim = (sim_t *)(MMAP_SIM);
+
+	out_be16(&sim->par, 0x300);
+
+	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
+
+	out_be16(&gpio->paddr, 0xfcff);
+	out_be16(&gpio->padat, 0x0c00);
+}
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("AMCORE v.001(alpha)\n");
+
+	init_lcd();
+
+	return 0;
+}
+
+/*
+ * in initdram we are here executing from flash
+ * case 1:
+ * is with no ACR/flash cache enabled
+ * nop = 40ns (scope measured)
+ */
+void fudelay(int usec)
+{
+	while (usec--)
+		asm volatile ("nop");
+}
+
+phys_size_t initdram(int board_type)
+{
+	u32 dramsize, RC;
+
+	sdramctrl_t *dc = (sdramctrl_t *)(MMAP_DRAMC);
+
+	/*
+	 * SDRAM  MT48LC4M32B2 details
+	 * Memory block 0: 16 MB of SDRAM at address $00000000
+	 * Port size: 32-bit port
+	 *
+	 * Memory block 0 wired as follows:
+	 * CPU   : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
+	 * SDRAM :  A0  A1  A2  A3  A4  A5  A6 A7  A8  A9 A10 A11 BA0 BA1
+	 *
+	 * Ensure that there is a delay of at least 100 microseconds from
+	 * processor reset to the following code so that the SDRAM is ready
+	 * for commands.
+	 */
+	fudelay(100);
+
+	/*
+	 * DCR
+	 * set proper  RC as per specification
+	 */
+	RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
+	RC = (RC * 15) >> 4;
+
+	/* 0x8000 is the faster option */
+	out_be16(&dc->dcr, 0x8200 | RC);
+
+	/*
+	 * DACR0, page mode continuous, CMD on A20 0x0300
+	 */
+	out_be32(&dc->dacr0, 0x00003304);
+
+	dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
+	out_be32(&dc->dmr0,  dramsize|1);
+
+	/* issue a PRECHARGE ALL */
+	out_be32(&dc->dacr0, 0x0000330c);
+	out_be32((u32 *)0x00000004, 0xbeaddeed);
+	/* issue AUTOREFRESH */
+	out_be32(&dc->dacr0, 0x0000b304);
+	/* let refresh occour */
+	fudelay(1);
+
+	out_be32(&dc->dacr0, 0x0000b344);
+	out_be32((u32 *)0x00000c00, 0xbeaddeed);
+
+	return get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE);
+}