diff options
Diffstat (limited to 'board/snmc/qs850/qs850.c')
| -rw-r--r-- | board/snmc/qs850/qs850.c | 214 |
1 files changed, 0 insertions, 214 deletions
diff --git a/board/snmc/qs850/qs850.c b/board/snmc/qs850/qs850.c deleted file mode 100644 index dc4a4768cd..0000000000 --- a/board/snmc/qs850/qs850.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2003 - * MuLogic B.V. - * - * (C) Copyright 2002 - * Simple Network Magic Corporation, dnevil@snmc.com - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/u-boot.h> -#include <commproc.h> -#include "mpc8xx.h" - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x0f07cc04, 0x00adcc04, 0x00a74c00, 0x00bfcc04, - 0x1fffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05, - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x0ff7fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00, - 0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05, - 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, - 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x0f07cc04, 0x0fafcc00, 0x01ad0c04, 0x1ff74c07, - 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x0ff7fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00, - 0x00fffc00, 0x00fffc00, 0x0ffffc04, 0x0ff77c04, - 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, - 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, 0x1ffffc05, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0xffffcc04, 0x1ff5cc84, 0xffffcc04, 0xffffcc04, - 0xffffcc84, 0xffffcc05, 0xffffcc04, 0xffffcc04, - 0xffffcc04, 0xffffcc04, 0xffffcc04, 0xffffcc04, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x1ff74c04, 0xffffcc07, 0xffffaa34, 0x1fb54a37 -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test ID string (QS850, QS823, ...) - * - * Always return 1 - */ -#if defined(CONFIG_QS850) -#define BOARD_IDENTITY "QS850" -#elif defined(CONFIG_QS823) -#define BOARD_IDENTITY "QS823" -#else -#define BOARD_IDENTITY "QS???" -#endif - -int checkboard (void) -{ - char *s, *e; - char buf[64]; - int i; - - i = getenv_f("serial#", buf, sizeof(buf)); - s = (i>0) ? buf : NULL; - - if (!s || strncmp(s, BOARD_IDENTITY, 5)) { - puts ("### No HW ID - assuming " BOARD_IDENTITY); - } else { - for (e=s; *e; ++e) { - if (*e == ' ') - break; - } - - for ( ; s<e; ++s) { - putc (*s); - } - } - putc ('\n'); - - return (0); -} - -/* ------------------------------------------------------------------------- */ -/* SDRAM Mode Register Definitions */ - -/* Set SDRAM Burst Length to 4 (010) */ -/* See Motorola MPC850 User Manual, Page 13-14 */ -#define SDRAM_BURST_LENGTH (2) - -/* Set Wrap Type to Sequential (0) */ -/* See Motorola MPC850 User Manual, Page 13-14 */ -#define SDRAM_WRAP_TYPE (0 << 3) - -/* Set /CAS Latentcy to 2 clocks */ -#define SDRAM_CAS_LATENTCY (2 << 4) - -/* The Mode Register value must be shifted left by 2, since it is */ -/* placed on the address bus, and the 2 LSBs are ignored for 32-bit accesses */ -#define SDRAM_MODE_REG ((SDRAM_BURST_LENGTH|SDRAM_WRAP_TYPE|SDRAM_CAS_LATENTCY) << 2) - -#define UPMA_RUN(loops,index) (0x80002000 + (loops<<8) + index) - -/* Please note a value of zero = 16 loops */ -#define REFRESH_INIT_LOOPS (0) - - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* - * Prescaler for refresh - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - /* - * Map controller bank 1 to the SDRAM address - */ - memctl->memc_or1 = CONFIG_SYS_OR1; - memctl->memc_br1 = CONFIG_SYS_BR1; - udelay(1000); - - /* perform SDRAM initialization sequence */ - memctl->memc_mamr = CONFIG_SYS_16M_MAMR; - udelay(100); - - /* Program the SDRAM's Mode Register */ - memctl->memc_mar = SDRAM_MODE_REG; - - /* Run the Prechard Pattern at 0x3C */ - memctl->memc_mcr = UPMA_RUN(1,0x3c); - udelay(1); - - /* Run the Refresh program residing at MAD index 0x30 */ - /* This contains the CBR Refresh command with a loop */ - /* The SDRAM must be refreshed at least 2 times */ - /* Please note a value of zero = 16 loops */ - memctl->memc_mcr = UPMA_RUN(REFRESH_INIT_LOOPS,0x30); - udelay(1); - - /* Run the Exception program residing at MAD index 0x3E */ - /* This contains the Write Mode Register command */ - /* The Write Mode Register command uses the value written to MAR */ - memctl->memc_mcr = UPMA_RUN(1,0x3e); - - udelay (1000); - - /* - * Check for 32M SDRAM Memory Size - */ - size = dram_size(CONFIG_SYS_32M_MAMR|MAMR_PTAE, - (long *)SDRAM_BASE, SDRAM_32M_MAX_SIZE); - udelay (1000); - - /* - * Check for 16M SDRAM Memory Size - */ - if (size != SDRAM_32M_MAX_SIZE) { - size = dram_size(CONFIG_SYS_16M_MAMR|MAMR_PTAE, - (long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE); - udelay (1000); - } - - udelay(10000); - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, long int maxsize) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} |
