diff options
Diffstat (limited to 'board/samsung/smdk2400/smdk2400.c')
| -rw-r--r-- | board/samsung/smdk2400/smdk2400.c | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c deleted file mode 100644 index 895bd7789a..0000000000 --- a/board/samsung/smdk2400/smdk2400.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/s3c24x0_cpu.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void); -int mdm_init (bd_t *); -extern void disable_putc(void); -extern void enable_putc(void); -extern int hwflow_onoff(int); -extern int do_mdm_init; /* defined in common/main.c */ -#endif /* CONFIG_MODEM_SUPPORT */ - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* memory and cpu-speed are setup before relocation */ - /* change the clock to be 50 MHz 1:1:1 */ - clk_power->mpllcon = 0x5c042; - clk_power->clkdivn = 0; - /* set up the I/O ports */ - gpio->pacon = 0x3ffff; - gpio->pbcon = 0xaaaaaaaa; - gpio->pbup = 0xffff; - gpio->pecon = 0x0; - gpio->peup = 0x0; -#ifdef CONFIG_HWFLOW - /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ - /* 10, 10, 00, 00, 10, 00, 10 */ - gpio->pfcon = 0xa22; - /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - gpio->pfup = 0x35; -#else - /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ - /* 00, 00, 00, 00, 10, 00, 10 */ - gpio->pfcon = 0x22; - /* Disable pull-up on Rx and Tx pins */ - gpio->pfup = 0x5; -#endif /* CONFIG_HWFLOW */ - gpio->pgcon = 0x0; - gpio->pgup = 0x0; - gpio->opencr = 0x0; - - /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ - gd->bd->bi_arch_number = MACH_TYPE_SMDK2400; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x0C000100; - -#ifdef CONFIG_MODEM_SUPPORT - if (key_pressed()) { - disable_putc(); /* modem doesn't understand banner etc */ - do_mdm_init = 1; - } -#endif /* CONFIG_MODEM_SUPPORT */ - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void) -{ - int rc; - if (1) { /* check for button push here, now just return 1 */ - rc = 1; - } - - return rc; -} -#endif /* CONFIG_MODEM_SUPPORT */ - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif |
