diff options
Diffstat (limited to 'board/mpl/common/usb_uhci.h')
| -rw-r--r-- | board/mpl/common/usb_uhci.h | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/board/mpl/common/usb_uhci.h b/board/mpl/common/usb_uhci.h new file mode 100644 index 0000000000..8c8f1615e3 --- /dev/null +++ b/board/mpl/common/usb_uhci.h @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ +#ifndef _USB_UHCI_H_ +#define _USB_UHCI_H_ + + +/* Command register */ +#define USBCMD 0 +#define USBCMD_RS 0x0001 /* Run/Stop */ +#define USBCMD_HCRESET 0x0002 /* Host reset */ +#define USBCMD_GRESET 0x0004 /* Global reset */ +#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ +#define USBCMD_FGR 0x0010 /* Force Global Resume */ +#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ +#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ +#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ + +/* Status register */ +#define USBSTS 2 +#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ +#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ +#define USBSTS_RD 0x0004 /* Resume Detect */ +#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ +#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ +#define USBSTS_HCH 0x0020 /* HC Halted */ + +/* Interrupt enable register */ +#define USBINTR 4 +#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ +#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ +#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ +#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ + +#define USBFRNUM 6 +#define USBFLBASEADD 8 +#define USBSOF 12 + +/* USB port status and control registers */ +#define USBPORTSC1 16 +#define USBPORTSC2 18 +#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ +#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ +#define USBPORTSC_PE 0x0004 /* Port Enable */ +#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ +#define USBPORTSC_LS 0x0030 /* Line Status */ +#define USBPORTSC_RD 0x0040 /* Resume Detect */ +#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ +#define USBPORTSC_PR 0x0200 /* Port Reset */ +#define USBPORTSC_SUSP 0x1000 /* Suspend */ + +/* Legacy support register */ +#define USBLEGSUP 0xc0 +#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ + +#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ +#define UHCI_PID 0xff /* PID MASK */ + +#define UHCI_PTR_BITS 0x000F +#define UHCI_PTR_TERM 0x0001 +#define UHCI_PTR_QH 0x0002 +#define UHCI_PTR_DEPTH 0x0004 + +/* for TD <status>: */ +#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ +#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ +#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ +#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ +#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ +#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ +#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ +#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ +#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ +#define TD_CTRL_NAK (1 << 19) /* NAK Received */ +#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ +#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ +#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ + +#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ + TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) + +#define TD_TOKEN_TOGGLE 19 + +/* ------------------------------------------------------------------------------------ + Virtual Root HUB + ------------------------------------------------------------------------------------ */ +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +/* Our Vendor Specific feature */ +#define RH_REMOVE_EP 0x00 + + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 + + +/* Transfer descriptor structure */ +typedef struct { + unsigned long link; /* next td/qh (LE)*/ + unsigned long status; /* status of the td */ + unsigned long info; /* Max Lenght / Endpoint / device address and PID */ + unsigned long buffer; /* pointer to data buffer (LE) */ + unsigned long dev_ptr; /* pointer to the assigned device (BE) */ + unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ +} uhci_td_t, *puhci_td_t; + +/* Queue Header structure */ +typedef struct { + unsigned long head; /* Next QH (LE)*/ + unsigned long element; /* Queue element pointer (LE) */ + unsigned long res[5]; /* reserved */ + unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ +} uhci_qh_t, *puhci_qh_t; + +struct virt_root_hub { + int devnum; /* Address of Root Hub endpoint */ + int numports; /* number of ports */ + int c_p_r[8]; /* C_PORT_RESET */ +}; + + +#endif /* _USB_UHCI_H_ */ + + |
