summaryrefslogtreecommitdiffstats
path: root/board/gth2/gth2.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/gth2/gth2.c')
-rw-r--r--board/gth2/gth2.c437
1 files changed, 0 insertions, 437 deletions
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
deleted file mode 100644
index 8c3b55af42..0000000000
--- a/board/gth2/gth2.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * (C) Copyright 2005
- * Thomas.Lange@corelatus.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/au1x00.h>
-#include <asm/addrspace.h>
-#include <asm/mipsregs.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-#include "ee_access.h"
-
-static int wdi_status = 0;
-
-#define SDRAM_SIZE ((64*1024*1024)-(12*4096))
-
-
-#define SERIAL_LOG_BUFFER CKSEG1ADDR(SDRAM_SIZE + (8*4096))
-
-void inline log_serial_char(char c){
- char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
- int serial_log_offset;
- u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
-
- serial_log_offset = *serial_log_offsetp;
-
- *(serial_log_buffer + serial_log_offset) = c;
-
- serial_log_offset++;
-
- if(serial_log_offset >= 4096){
- serial_log_offset = 4;
- }
- *serial_log_offsetp = serial_log_offset;
-}
-
-void init_log_serial(void){
- char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
- u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
-
- /* Copy buffer from last run */
- memcpy(serial_log_buffer + 4096,
- serial_log_buffer,
- 4096);
-
- memset(serial_log_buffer, 0, 4096);
-
- *serial_log_offsetp = 4;
-}
-
-
-void hw_watchdog_reset(void){
- volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
- volatile u32 *sys_outputclear = (volatile u32*)SYS_OUTPUTCLR;
- if(wdi_status){
- *sys_outputset = GPIO_CPU_LED|GPIO_WDI;
- wdi_status = 0;
- }
- else{
- *sys_outputclear = GPIO_CPU_LED|GPIO_WDI;
- wdi_status = 1;
- }
-}
-
-phys_size_t initdram(int board_type)
-{
- /* Sdram is setup by assembler code */
- /* If memory could be changed, we should return the true value here */
-
- WATCHDOG_RESET();
-
- return (SDRAM_SIZE);
-}
-
-/* In arch/mips/cpu/cpu.c */
-void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
-
-void set_ledcard(u32 value){
- /* Clock 24 bits to led card */
- int i;
- volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
- volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
-
- /* Start with known values */
- *sys_outputclr = GPIO_LEDCLK|GPIO_LEDD;
-
- for(i=0;i<24;i++){
- if(value&0x00800000){
- *sys_outputset = GPIO_LEDD;
- }
- else{
- *sys_outputclr = GPIO_LEDD;
- }
- udelay(1);
- *sys_outputset = GPIO_LEDCLK;
- udelay(1);
- *sys_outputclr = GPIO_LEDCLK;
- udelay(1);
-
- value<<=1;
- }
- /* Data is enable output */
- *sys_outputset = GPIO_LEDD;
-}
-
-int checkboard (void)
-{
- volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
- volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
- volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
- u32 proc_id;
-
- WATCHDOG_RESET();
-
- *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
-
- proc_id = read_c0_prid();
-
- switch (proc_id >> 24) {
- case 0:
- puts ("Board: GTH2\n");
- printf ("CPU: Au1000 500 MHz, id: 0x%02x, rev: 0x%02x\n",
- (proc_id >> 8) & 0xFF, proc_id & 0xFF);
- break;
- default:
- printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
- }
-
- set_io_port_base(0);
-
-#ifdef CONFIG_IDE_PCMCIA
- /* PCMCIA is on a 36 bit physical address.
- We need to map it into a 32 bit addresses */
- write_one_tlb(20, /* index */
- 0x01ffe000, /* Pagemask, 16 MB pages */
- CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
- 0x3C000017, /* Lo0 */
- 0x3C200017); /* Lo1 */
-
- write_one_tlb(21, /* index */
- 0x01ffe000, /* Pagemask, 16 MB pages */
- CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
- 0x3D000017, /* Lo0 */
- 0x3D200017); /* Lo1 */
-
- write_one_tlb(22, /* index */
- 0x01ffe000, /* Pagemask, 16 MB pages */
- CONFIG_SYS_PCMCIA_MEM_ADDR, /* Hi */
- 0x3E000017, /* Lo0 */
- 0x3E200017); /* Lo1 */
-
-#endif /* CONFIG_IDE_PCMCIA */
-
- /* Wait for GPIO ports to become stable */
- udelay(5000); /* FIXME */
-
- /* Release reset of ethernet PHY chips */
- /* Always do this, because linux does not know about it */
- *sys_outputset = GPIO_ERESET;
-
- /* Kill FPGA:s */
- *sys_outputclr = GPIO_CACONFIG|GPIO_DPACONFIG;
- udelay(2);
- *sys_outputset = GPIO_CACONFIG|GPIO_DPACONFIG;
-
- /* Turn front led yellow */
- set_ledcard(0x00100000);
-
- return 0;
-}
-
-#define POWER_OFFSET 0xF0000
-#define SW_WATCHDOG_REASON 13
-
-#define BOOTDATA_OFFSET 0xF8000
-#define MAX_ATTEMPTS 5
-
-#define FAILSAFE_BOOT 1
-#define SYSTEM_BOOT 2
-#define SYSTEM2_BOOT 3
-
-#define WRITE_FLASH16(a, d) \
-do \
-{ \
- *((volatile u16 *) (a)) = (d);\
- } while(0)
-
-static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
-{
- u16 data;
- volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
-
- switch(System){
- case FAILSAFE_BOOT:
- printf ("Setting failsafe boot in flash\n");
- break;
- case SYSTEM_BOOT:
- printf ("Setting system boot in flash\n");
- break;
- case SYSTEM2_BOOT:
- printf ("Setting system2 boot in flash\n");
- break;
- default:
- printf ("Invalid system data %u, setting failsafe\n", System);
- System = FAILSAFE_BOOT;
- }
-
- if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
- printf ("Invalid boot count %u, setting 1\n", Count);
- Count = 1;
- }
-
- printf ("Boot attempt %d\n", Count);
-
- data = (System << 8) | Count;
- /* AMD 16 bit */
- WRITE_FLASH16 (&flash[0x555], 0xAAAA);
- WRITE_FLASH16 (&flash[0x2AA], 0x5555);
- WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
- WRITE_FLASH16 (addr, data);
-}
-
-static int random_system(void){
- /* EEPROM read failed. Just try to choose one
- system release and hope it works */
-
- /* FIXME */
- return(SYSTEM_BOOT);
-}
-
-static int switch_system(int old_system){
- u8 Rx[10];
- u8 Tx[5];
- int valid_release;
-
- if(old_system==FAILSAFE_BOOT){
- /* Find out which system release to use */
-
- /* Copy from nvram to scratchpad */
- Tx[0] = RECALL_MEMORY;
- Tx[1] = 7; /* Page */
- if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
- printf ("EE user page 7 recall failed\n");
- return (random_system());
- }
-
- Tx[0] = READ_SCRATCHPAD;
- if (ee_do_cpu_command (Tx, 2, Rx, 9, 1)) {
- printf ("EE user page 7 read failed\n");
- return (random_system());
- }
- /* Crc in 9:th byte */
- if (!ee_crc_ok (Rx, 8, *(Rx + 8))) {
- printf ("EE read failed, page 7. CRC error\n");
- return (random_system());
- }
-
- valid_release = Rx[7];
- if((valid_release==0xFF)|
- ((valid_release&1) == 0)){
- return(SYSTEM_BOOT);
- }
- else{
- return(SYSTEM2_BOOT);
- }
- }
- else{
- return(FAILSAFE_BOOT);
- }
-}
-
-static void check_boot_tries (void)
-{
- /* Count the number of boot attemps
- switch system if too many */
-
- int i;
- volatile u16 *addr;
- volatile u16 data;
- u8 system = FAILSAFE_BOOT;
- u8 count;
-
- addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
-
- if (*addr == 0xFFFF) {
- printf ("*** No bootdata exists. ***\n");
- write_bootdata (addr, FAILSAFE_BOOT, 1);
- } else {
- /* Search for latest written bootdata */
- i = 0;
- while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
- addr++;
- i++;
- }
- if (i >= 8000) {
- /* Whoa, dont write any more */
- printf ("*** No bootdata found. Not updating flash***\n");
- } else {
- /* See how many times we have tried to boot real system */
- data = *addr;
- system = data >> 8;
- count = data & 0xFF;
- if ((system != SYSTEM_BOOT) &
- (system != SYSTEM2_BOOT) &
- (system != FAILSAFE_BOOT)) {
- printf ("*** Wrong system %d\n", system);
- system = FAILSAFE_BOOT;
- count = 1;
- } else {
- switch (count) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- /* Try same system again if needed */
- count++;
- break;
-
- case 5:
- /* Switch system and reset tries */
- count = 1;
- system = switch_system(system);
- printf ("***Too many boot attempts, switching system***\n");
- break;
- default:
- /* Switch system, start over and hope it works */
- printf ("***Unexpected data on addr 0x%x, %u***\n",
- (u32) addr, data);
- count = 1;
- system = switch_system(system);
- }
- }
- write_bootdata (addr + 1, system, count);
- }
- }
- switch(system){
- case FAILSAFE_BOOT:
- printf ("Booting failsafe system\n");
- setenv ("bootargs", "panic=1 root=/dev/hda7");
- setenv ("bootcmd", "ide reset;disk 0x81000000 0:5;run addmisc;bootm");
- break;
-
- case SYSTEM_BOOT:
- printf ("Using normal system\n");
- setenv ("bootargs", "panic=1 root=/dev/hda4");
- setenv ("bootcmd", "ide reset;disk 0x81000000 0:2;run addmisc;bootm");
- break;
-
- case SYSTEM2_BOOT:
- printf ("Using normal system2\n");
- setenv ("bootargs", "panic=1 root=/dev/hda9");
- setenv ("bootcmd", "ide reset;disk 0x81000000 0:8;run addmisc;bootm");
- break;
- default:
- printf ("Invalid system %d\n", system);
- printf ("Hanging\n");
- while(1);
- }
-}
-
-int misc_init_r(void){
- u8 Rx[80];
- u8 Tx[5];
- int page;
- int read = 0;
-
- WATCHDOG_RESET();
-
- if (ee_init_cpu_data ()) {
- printf ("EEPROM init failed\n");
- return (0);
- }
-
- /* Check which release to boot */
- check_boot_tries ();
-
- /* Read the pages where ethernet address is stored */
-
- for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
- /* Copy from nvram to scratchpad */
- Tx[0] = RECALL_MEMORY;
- Tx[1] = page;
- if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
- printf ("EE user page %d recall failed\n", page);
- return (0);
- }
-
- Tx[0] = READ_SCRATCHPAD;
- if (ee_do_cpu_command (Tx, 2, Rx + read, 9, 1)) {
- printf ("EE user page %d read failed\n", page);
- return (0);
- }
- /* Crc in 9:th byte */
- if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
- printf ("EE read failed, page %d. CRC error\n", page);
- return (0);
- }
- read += 8;
- }
-
- /* Add eos after eth addr */
- Rx[17] = 0;
-
- printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
-
- if ((Rx[2] != ':') |
- (Rx[5] != ':') |
- (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
- printf ("*** ethernet addr invalid, using default ***\n");
- } else {
- setenv ("ethaddr", (char *)Rx);
- }
- return (0);
-}
OpenPOWER on IntegriCloud