summaryrefslogtreecommitdiffstats
path: root/board/gen860t/ioport.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/gen860t/ioport.c')
-rw-r--r--board/gen860t/ioport.c276
1 files changed, 276 insertions, 0 deletions
diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c
new file mode 100644
index 0000000000..5d6524dbd3
--- /dev/null
+++ b/board/gen860t/ioport.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include "ioport.h"
+
+#if 0
+#define IOPORT_DEBUG
+#endif
+
+#ifdef IOPORT_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/*
+ * The ioport configuration table.
+ */
+const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
+ /*
+ * Port A configuration
+ * Pin Signal Type Active Initial state
+ * PA7 fpgaProgramLowOut Out Low High
+ */
+ { /* conf ppar psor pdir podr pdat pint function */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */
+ /* PA15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA9 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 1*/
+ /* PA8 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 1*/
+ /* PA7 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaProgramLow */
+ /* PA6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA5 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 0*/
+ /* PA4 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 0*/
+ /* PA3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA2 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA1 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PA0 */ { 0, 0, 0, 0, 0, 0, 0 } /* */
+ },
+
+ /*
+ * Pin Signal Type Active Initial state
+ * PB14 docBusyLowIn In Low X
+ * PB15 gpio1Sig Out High Low
+ * PB16 fpgaDoneBi In High X
+ * PB17 swBitOkLowOut Out Low Low
+ * PB19 speakerVolSig Out/Hi-Z High/Low High (Hi-Z)
+ * PB22 fpgaInitLowBi In Low X
+ * PB23 batteryOkSig In High X
+ */
+ { /* conf ppar psor pdir podr pdat pint function */
+ /* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB30 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB29 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB28 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB27 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB26 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB25 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB24 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB23 */ { 1, 0, 0, 0, 0, 0, 0 }, /* batteryOk */
+ /* PB22 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaInitLowBi */
+ /* PB21 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB20 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB19 */ { 1, 0, 0, 1, 1, 1, 0 }, /* speakerVol */
+ /* PB18 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PB17 */ { 1, 0, 0, 1, 0, 0, 0 }, /* swBitOkLow */
+ /* PB16 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaDone */
+ /* PB15 */ { 1, 0, 0, 1, 0, 0, 0 }, /* gpio1 */
+ /* PB14 */ { 1, 0, 0, 0, 0, 0, 0 } /* docBusyLow */
+ },
+
+ /*
+ * Pin Signal Type Active Initial state
+ * PC4 i2cBus1EnSig Out High High
+ * PC5 i2cBus2EnSig Out High High
+ * PC6 gpio0Sig Out High Low
+ * PC8 i2cBus3EnSig Out High High
+ * PC10 i2cBus4EnSig Out High High
+ * PC11 fpgaResetLowOut Out Low High
+ * PC12 systemBitOkIn In High X
+ * PC15 selfDreqLow In Low X
+ */
+ { /* conf ppar psor pdir podr pdat pint function */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC15 */ { 1, 0, 0, 0, 0, 0, 0 }, /* selfDreqLowIn */
+ /* PC14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC12 */ { 1, 0, 0, 0, 0, 0, 0 }, /* systemBitOkIn */
+ /* PC11 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaResetLowOut */
+ /* PC10 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus4EnSig */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC8 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus3EnSig */
+ /* PC7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC6 */ { 1, 0, 0, 1, 0, 1, 0 }, /* gpio0 */
+ /* PC5 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus2EnSig */
+ /* PC4 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus1EnSig */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */
+ },
+
+ /* Port D configuration */
+ { /* conf ppar psor pdir podr pdat pint function */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD8 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD5 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD4 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */
+ }
+};
+
+/*
+ * Configure the MPC8XX I/O ports per the ioport configuration table
+ * (taken from ./cpu/mpc8260/cpu_init.c)
+ */
+void
+config_mpc8xx_ioports(volatile immap_t *immr)
+{
+ int portnum;
+
+ for (portnum = 0; portnum < NUM_PORTS; portnum++) {
+ uint pmsk = 0, ppar = 0, psor = 0, pdir = 0;
+ uint podr = 0, pdat = 0, pint = 0;
+ uint msk = 1;
+ mpc8xx_iop_conf_t *iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][0];
+ mpc8xx_iop_conf_t *eiopc = iopc + PORT_BITS;
+
+ /*
+ * For all ports except port B, ignore the two don't care entries
+ * in the configuration tables.
+ */
+ if (portnum != 1) {
+ iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][2];
+ }
+
+ /*
+ * NOTE: index 0 refers to pin 17, index 17 refers to pin 0
+ */
+ while (iopc < eiopc) {
+ if (iopc->conf) {
+ pmsk |= msk;
+ if (iopc->ppar) ppar |= msk;
+ if (iopc->psor) psor |= msk;
+ if (iopc->pdir) pdir |= msk;
+ if (iopc->podr) podr |= msk;
+ if (iopc->pdat) pdat |= msk;
+ if (iopc->pint) pint |= msk;
+ }
+ msk <<= 1;
+ iopc++;
+ }
+
+ PRINTF("%s:%d:\n portnum=%d ", __FUNCTION__, __LINE__, portnum);
+#ifdef IOPORT_DEBUG
+ switch(portnum) {
+ case 0: printf("(A)\n"); break;
+ case 1: printf("(B)\n"); break;
+ case 2: printf("(C)\n"); break;
+ case 3: printf("(D)\n"); break;
+ default: printf("(?)\n"); break;
+ }
+#endif
+ PRINTF(" ppar=0x%.8x pdir=0x%.8x podr=0x%.8x\n"
+ " pdat=0x%.8x psor=0x%.8x pint=0x%.8x pmsk=0x%.8x\n",
+ ppar, pdir, podr, pdat, psor, pint, pmsk);
+
+ /*
+ * Have to handle the ioports on a port-by-port basis since there
+ * are three different flavors.
+ */
+ if (pmsk != 0) {
+ uint tpmsk = ~pmsk;
+
+ if (0 == portnum) { /* port A */
+ immr->im_ioport.iop_papar &= tpmsk;
+ immr->im_ioport.iop_padat =
+ (immr->im_ioport.iop_padat & tpmsk) | pdat;
+ immr->im_ioport.iop_padir =
+ (immr->im_ioport.iop_padir & tpmsk) | pdir;
+ immr->im_ioport.iop_paodr =
+ (immr->im_ioport.iop_paodr & tpmsk) | podr;
+ immr->im_ioport.iop_papar |= ppar;
+ }
+ else if (1 == portnum) { /* port B */
+ immr->im_cpm.cp_pbpar &= tpmsk;
+ immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & tpmsk) | pdat;
+ immr->im_cpm.cp_pbdir = (immr->im_cpm.cp_pbdir & tpmsk) | pdir;
+ immr->im_cpm.cp_pbodr = (immr->im_cpm.cp_pbodr & tpmsk) | podr;
+ immr->im_cpm.cp_pbpar |= ppar;
+ }
+ else if (2 == portnum) { /* port C */
+ immr->im_ioport.iop_pcpar &= tpmsk;
+ immr->im_ioport.iop_pcdat =
+ (immr->im_ioport.iop_pcdat & tpmsk) | pdat;
+ immr->im_ioport.iop_pcdir =
+ (immr->im_ioport.iop_pcdir & tpmsk) | pdir;
+ immr->im_ioport.iop_pcint =
+ (immr->im_ioport.iop_pcint & tpmsk) | pint;
+ immr->im_ioport.iop_pcso =
+ (immr->im_ioport.iop_pcso & tpmsk) | psor;
+ immr->im_ioport.iop_pcpar |= ppar;
+ }
+ else if (3 == portnum) { /* port D */
+ immr->im_ioport.iop_pdpar &= tpmsk;
+ immr->im_ioport.iop_pddat =
+ (immr->im_ioport.iop_pddat & tpmsk) | pdat;
+ immr->im_ioport.iop_pddir =
+ (immr->im_ioport.iop_pddir & tpmsk) | pdir;
+ immr->im_ioport.iop_pdpar |= ppar;
+ }
+ }
+ }
+
+ PRINTF("%s:%d: Port A:\n papar=0x%.4x padir=0x%.4x"
+ " paodr=0x%.4x\n padat=0x%.4x\n", __FUNCTION__, __LINE__,
+ immr->im_ioport.iop_papar, immr->im_ioport.iop_padir,
+ immr->im_ioport.iop_paodr, immr->im_ioport.iop_padat);
+ PRINTF("%s:%d: Port B:\n pbpar=0x%.8x pbdir=0x%.8x"
+ " pbodr=0x%.8x\n pbdat=0x%.8x\n", __FUNCTION__, __LINE__,
+ immr->im_cpm.cp_pbpar, immr->im_cpm.cp_pbdir,
+ immr->im_cpm.cp_pbodr, immr->im_cpm.cp_pbdat);
+ PRINTF("%s:%d: Port C:\n pcpar=0x%.4x pcdir=0x%.4x"
+ " pcdat=0x%.4x\n pcso=0x%.4x pcint=0x%.4x\n ",
+ __FUNCTION__, __LINE__, immr->im_ioport.iop_pcpar,
+ immr->im_ioport.iop_pcdir, immr->im_ioport.iop_pcdat,
+ immr->im_ioport.iop_pcso, immr->im_ioport.iop_pcint);
+ PRINTF("%s:%d: Port D:\n pdpar=0x%.4x pddir=0x%.4x"
+ " pddat=0x%.4x\n", __FUNCTION__, __LINE__,
+ immr->im_ioport.iop_pdpar, immr->im_ioport.iop_pddir,
+ immr->im_ioport.iop_pddat);
+}
+
+/* vim: set ts=4 sw=4 tw=78: */
OpenPOWER on IntegriCloud