diff options
Diffstat (limited to 'board/freescale/mx6qsabresd/mx6qsabresd.c')
| -rw-r--r-- | board/freescale/mx6qsabresd/mx6qsabresd.c | 48 |
1 files changed, 39 insertions, 9 deletions
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 2b3926aaf3..0d7cb9efd0 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -26,10 +26,12 @@ #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> #include <mmc.h> #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -145,21 +147,34 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = { int board_mmc_getcd(struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; switch (cfg->esdhc_base) { case USDHC2_BASE_ADDR: - return !gpio_get_value(USDHC2_CD_GPIO); + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; case USDHC3_BASE_ADDR: - return !gpio_get_value(USDHC3_CD_GPIO); - default: - return 1; /* eMMC/uSDHC4 is always present */ + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + case USDHC4_BASE_ADDR: + ret = 1; /* eMMC/uSDHC4 is always present */ + break; } + + return ret; } int board_mmc_init(bd_t *bis) { int i; + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 SD2 + * mmc1 SD3 + * mmc2 eMMC + */ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { switch (i) { case 0: @@ -239,11 +254,6 @@ int board_eth_init(bd_t *bis) return 0; } -u32 get_board_rev(void) -{ - return 0x63000; -} - int board_early_init_f(void) { setup_iomux_uart(); @@ -259,6 +269,26 @@ int board_init(void) return 0; } +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + /* 8 bit bus width */ + {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int board_late_init(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + + return 0; +} + int checkboard(void) { puts("Board: MX6Q-SabreSD\n"); |
