summaryrefslogtreecommitdiffstats
path: root/board/freescale/ls2080aqds/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/ls2080aqds/README')
-rw-r--r--board/freescale/ls2080aqds/README229
1 files changed, 229 insertions, 0 deletions
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
new file mode 100644
index 0000000000..a4abb7e8ae
--- /dev/null
+++ b/board/freescale/ls2080aqds/README
@@ -0,0 +1,229 @@
+Overview
+--------
+The LS2080A Development System (QDS) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
+Layerscape Architecture processor. The LS2080AQDS provides validation and
+SW development platform for the Freescale LS2080A processor series, with
+a complete debugging environment.
+
+LS2080A SoC Overview
+------------------
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2080A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A57 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+ the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+ - Packet parsing, classification, and distribution (WRIOP)
+ - Queue and Hardware buffer management for scheduling, packet sequencing, and
+ congestion management, buffer allocation and de-allocation (QBMan)
+ - Cryptography acceleration (SEC) at up to 10 Gbps
+ - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+ - Decompression/compression acceleration (DCE) at up to 20 Gbps
+ - Accelerated I/O processing (AIOP) at up to 20 Gbps
+ - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+ - Up to eight 10 Gbps Ethernet MACs
+ - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+ - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+ - Two serial ATA (SATA 3.0) controllers
+ - Two high-speed USB 3.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (eSDXC/eMMC)
+ - Serial peripheral interface (SPI) controller
+ - Quad Serial Peripheral Interface (QSPI) Controller
+ - Four I2C controllers
+ - Two DUARTs
+ - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+ LS2080AQDS board Overview
+ -----------------------
+ - SERDES Connections, 16 lanes supporting:
+ - PCI Express - 3.0
+ - SGMII, SGMII 2.5
+ - QSGMII
+ - SATA 3.0
+ - XAUI
+ - XFI
+ - DDR Controller
+ - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
+ chip-selects and two DIMM connectors. Support is up to 2133MT/s.
+ - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
+ and two DIMM connectors. Support is up to 1600MT/s.
+ -IFC/Local Bus
+ - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
+ - One in-socket 128 MB NOR flash 16-bit data bus
+ - One 512 MB NAND flash with ECC support
+ - IFC Test Port
+ - PromJet Port
+ - FPGA connection
+ - USB 3.0
+ - Two high speed USB 3.0 ports
+ - First USB 3.0 port configured as Host with Type-A connector
+ - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC: PCIe x1 Right Angle connector for supporting following cards
+ - 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
+ - 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
+ - 4-bit eMMC Card Rev 4.4 (1.8V only)
+ - 8-bit eMMC Card Rev 4.5 (1.8V only)
+ - SD Card Rev 2.0 and Rev 3.0
+ - DSPI: 3 high-speed flash Memory for storage
+ - 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 8 MB high-speed flash Memory (up to 104 MHz)
+ - 512 MB low-speed flash Memory (up to 40 MHz)
+ - QSPI: via NAND/QSPI Card
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - UART
+ - Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s
+ - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
+0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
+0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
+0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
+0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
+0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
+0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
+
+Other addresses are either reserved, or not used directly by u-boot.
+This list should be updated when more addresses are used.
+
+IFC region map from core's view
+-------------------------------
+During boot i.e. IFC Region #1:-
+ 0x30000000 - 0x37ffffff : 128MB : NOR flash
+ 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
+ 0x3C000000 - 0x40000000 : 64MB : FPGA etc
+
+After relocate to DDR i.e. IFC Region #2:-
+ 0x5_1000_0000..0x5_1fff_ffff Memory Hole
+ 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
+ 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
+ 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
+ 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
+
+Booting Options
+---------------
+a) Promjet Boot
+b) NOR boot
+c) NAND boot
+d) SD boot
+e) QSPI boot
+
+Environment Variables
+---------------------
+- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+
+- mcmemsize: MC DRAM block size. If this variable is not defined
+ the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+ earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+ hugepages=16 mem=2048M'
+
+
+X-QSGMII-16PORT riser card
+----------------------------
+The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes
+interfaces implemented in PCIe form factor board.
+It supports followings
+ - Card can operate with up to 4 QSGMII lane simultaneously
+ - Card can operate with up to 8 SGMII lane simultaneously
+
+Supported card configuration
+ - CSEL : ON ON ON ON
+ - MSEL1 : ON ON ON ON OFF OFF OFF OFF
+ - MSEL2 : OFF OFF OFF OFF ON ON ON ON
+
+To enable this card: modify hwconfig to add "xqsgmii" variable.
+
+Supported PHY addresses during SGMII:
+#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
+#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
+#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
+#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
+#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
+#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
+#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
+#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
+
+Mapping DPMACx to PHY during QSGMII
+DPMAC1 -> PHY1-P0
+DPMAC2 -> PHY2-P0
+DPMAC3 -> PHY3-P0
+DPMAC4 -> PHY4-P0
+DPMAC5 -> PHY3-P2
+DPMAC6 -> PHY1-P2
+DPMAC7 -> PHY4-P1
+DPMAC8 -> PHY2-P2
+DPMAC9 -> PHY1-P0
+DPMAC10 -> PHY2-P0
+DPMAC11 -> PHY3-P0
+DPMAC12 -> PHY4-P0
+DPMAC13 -> PHY3-P2
+DPMAC14 -> PHY1-P2
+DPMAC15 -> PHY4-P1
+DPMAC16 -> PHY2-P2
+
+
+Supported PHY address during QSGMII
+#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
+#define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
+#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
+#define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
+#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
+#define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
+#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
+#define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
+#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
+#define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
+#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
+#define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
+#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
+#define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
+#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
+#define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
+
+Mapping DPMACx to PHY during QSGMII
+DPMAC1 -> PHY1-P3
+DPMAC2 -> PHY1-P2
+DPMAC3 -> PHY1-P1
+DPMAC4 -> PHY1-P0
+DPMAC5 -> PHY2-P3
+DPMAC6 -> PHY2-P2
+DPMAC7 -> PHY2-P1
+DPMAC8 -> PHY2-P0
+DPMAC9 -> PHY3-P0
+DPMAC10 -> PHY3-P1
+DPMAC11 -> PHY3-P2
+DPMAC12 -> PHY3-P3
+DPMAC13 -> PHY4-P0
+DPMAC14 -> PHY4-P1
+DPMAC15 -> PHY4-P2
+DPMAC16 -> PHY4-P3
+
OpenPOWER on IntegriCloud