summaryrefslogtreecommitdiffstats
path: root/board/ebony/ebony.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ebony/ebony.c')
-rw-r--r--board/ebony/ebony.c301
1 files changed, 301 insertions, 0 deletions
diff --git a/board/ebony/ebony.c b/board/ebony/ebony.c
new file mode 100644
index 0000000000..723fad328c
--- /dev/null
+++ b/board/ebony/ebony.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include "ebony.h"
+#include <asm/processor.h>
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+long int fixed_sdram (void);
+
+int board_pre_init (void)
+{
+ uint reg;
+ unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char status;
+
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr (ebccfga, xbcfg);
+ reg = mfdcr (ebccfgd);
+ mtdcr (ebccfgd, reg | 0x04000000); /* Set ATC */
+
+ mtebc (pb1ap, 0x02815480); /* NVRAM/RTC */
+ mtebc (pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
+ mtebc (pb7ap, 0x01015280); /* FPGA registers */
+ mtebc (pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
+
+ /* read FPGA_REG0 and set the bus controller */
+ status = *fpga_base;
+ if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
+ mtebc (pb0ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
+ mtebc (pb2ap, 0x9b015480); /* 4MB FLASH */
+ mtebc (pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
+ } else {
+ mtebc (pb0ap, 0x9b015480); /* 4MB FLASH */
+ mtebc (pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
+
+ /* set CS2 if FLASH_ONBD_N == 0 */
+ if (!(status & FLASH_ONBD_N)) {
+ mtebc (pb2ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc (pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
+ }
+ }
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ return 0;
+}
+
+
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info (&sysinfo);
+
+ printf ("Board: IBM 440GP Evaluation Board (Ebony)\n");
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ return (0);
+}
+
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+ extern long spd_sdram (void);
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram ();
+#else
+ dram_size = fixed_sdram ();
+#endif
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ *
+ * Assumes: 128 MB, non-ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ /* RA=10 RD=3 */
+ mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay (400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ for (;;) {
+ mfsdram (mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+
+ return (128 * 1024 * 1024); /* 128 MB */
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The ebony board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ strap = mfdcr(cpc0_strp1);
+ if( (strap & 0x00100000) == 0 ){
+ printf("PCI: CPC0_STRP1[PAE] not set.\n");
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The ebony board is always configured as host. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
OpenPOWER on IntegriCloud