summaryrefslogtreecommitdiffstats
path: root/board/cds/mpc8548cds/mpc8548cds.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/cds/mpc8548cds/mpc8548cds.c')
-rw-r--r--board/cds/mpc8548cds/mpc8548cds.c64
1 files changed, 47 insertions, 17 deletions
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 5bc08900a4..7433ebf25b 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -27,9 +27,11 @@
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <spd.h>
+#include <miiphy.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
+#include "../common/via.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
@@ -293,26 +295,25 @@ testdram(void)
#endif
#if defined(CONFIG_PCI)
-
-/*
- * Initialize PCI Devices, report devices found.
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device. Work around that by refusing to configure it.
*/
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_mpc85xxcds_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- } },
- { }
+ {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+ {0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
+ {0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
+ {0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
};
-#endif
-static struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_mpc85xxcds_config_table,
+static struct pci_controller hose[] = {
+ { config_table: pci_mpc85xxcds_config_table,},
+#ifdef CONFIG_MPC85XX_PCI2
+ {},
#endif
};
@@ -322,8 +323,37 @@ void
pci_init_board(void)
{
#ifdef CONFIG_PCI
- extern void pci_mpc85xx_init(struct pci_controller *hose);
-
pci_mpc85xx_init(&hose);
#endif
}
+
+int last_stage_init(void)
+{
+ unsigned short temp;
+
+ /* Change the resistors for the PHY */
+ /* This is needed to get the RGMII working for the 1.3+
+ * CDS cards */
+ if (get_board_version() == 0x13) {
+ miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ TSEC1_PHY_ADDR, 29, 18);
+
+ miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
+ TSEC1_PHY_ADDR, 30, &temp);
+
+ temp = (temp & 0xf03f);
+ temp |= 2 << 9; /* 36 ohm */
+ temp |= 2 << 6; /* 39 ohm */
+
+ miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ TSEC1_PHY_ADDR, 30, temp);
+
+ miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ TSEC1_PHY_ADDR, 29, 3);
+
+ miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ TSEC1_PHY_ADDR, 30, 0x8000);
+ }
+
+ return 0;
+}
OpenPOWER on IntegriCloud