1 files changed, 0 insertions, 79 deletions
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
deleted file mode 100644
index 2087a4aabd..0000000000
--- a/board/bmw/ns16550.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * NS16550 Serial Port
- * originally from linux source (arch/powerpc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CONFIG_SYS_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- * further modified to support the 8245 duart
- * modifications (c) Paul Jimenez, Musenki, Inc. 2001.
- */
-
-
-struct NS16550 {
-	unsigned char rbrthrdlb;	/* 0 */
-	unsigned char ierdmb;		/* 1 */
-	unsigned char iirfcrafr;	/* 2 */
-	unsigned char lcr;		/* 3 */
-	unsigned char mcr;		/* 4 */
-	unsigned char lsr;		/* 5 */
-	unsigned char msr;		/* 6 */
-	unsigned char scr;		/* 7 */
-	unsigned char reserved[2];	/* 8 & 9 */
-	unsigned char dsr;		/* 10 */
-	unsigned char dcr;		/* 11 */
-};
-
-
-#define rbr rbrthrdlb
-#define thr rbrthrdlb
-#define dll rbrthrdlb
-#define ier ierdmb
-#define dlm ierdmb
-#define iir iirfcrafr
-#define fcr iirfcrafr
-#define afr iirfcrafr
-
-#define FCR_FIFO_EN     0x01	/*fifo enable */
-#define FCR_RXSR        0x02	/*receiver soft reset */
-#define FCR_TXSR        0x04	/*transmitter soft reset */
-#define FCR_DMS		0x08	/* DMA Mode Select */
-
-#define MCR_RTS         0x02	/* Readyu to Send */
-#define MCR_LOOP	0x10	/* Local loopback mode enable */
-/* #define MCR_DTR         0x01    noton 8245 duart */
-/* #define MCR_DMA_EN      0x04    noton 8245 duart */
-/* #define MCR_TX_DFR      0x08    noton 8245 duart */
-
-#define LCR_WLS_MSK 0x03	/* character length slect mask */
-#define LCR_WLS_5   0x00	/* 5 bit character length */
-#define LCR_WLS_6   0x01	/* 6 bit character length */
-#define LCR_WLS_7   0x02	/* 7 bit character length */
-#define LCR_WLS_8   0x03	/* 8 bit character length */
-#define LCR_STB     0x04	/* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN     0x08	/* Parity eneble */
-#define LCR_EPS     0x10	/* Even Parity Select */
-#define LCR_STKP    0x20	/* Stick Parity */
-#define LCR_SBRK    0x40	/* Set Break */
-#define LCR_BKSE    0x80	/* Bank select enable - aka DLAB on 8245 */
-
-#define LSR_DR      0x01	/* Data ready */
-#define LSR_OE      0x02	/* Overrun */
-#define LSR_PE      0x04	/* Parity error */
-#define LSR_FE      0x08	/* Framing error */
-#define LSR_BI      0x10	/* Break */
-#define LSR_THRE    0x20	/* Xmit holding register empty */
-#define LSR_TEMT    0x40	/* Xmitter empty */
-#define LSR_ERR     0x80	/* Error */
-
-/* useful defaults for LCR*/
-#define LCR_8N1     0x03
-
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc (volatile struct NS16550 *com_port);
-int NS16550_tstc (volatile struct NS16550 *com_port);
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);