1 files changed, 198 insertions, 201 deletions
diff --git a/board/MAI/AmigaOneG3SE/start.txt b/board/MAI/AmigaOneG3SE/start.txt
index 5c7b541a2b..e4214622ce 100644
--- a/board/MAI/AmigaOneG3SE/start.txt
+++ b/board/MAI/AmigaOneG3SE/start.txt
@@ -1,201 +1,198 @@
-
-	/*------------------------------------------------------*/
-        /*              TERON Articia / SDRAM Init              */
-        /*------------------------------------------------------*/
-
-*       XD_CTL  = 0x81000000			(0x74)
-
-*       HBUS_ACC_CTL_0 &= 0xFFFFFDFF		(0x5c)
-                       /* host bus access ctl reg 2(5e) */
-                       /* set - CPU read from memory data one clock after data is latched */
-
-*       GLOBL_INFO_0 |= 0x00004000		(0x50)
-                      /* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */
-
-        PCI_1_SB_CONFIG_0 |= 0x00000400         (0x80d0)
-                        /* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */
-
-        MEM_RAS_CTL_0 |= 0x3f000000		(0xcc)
-		      &= 0x3fffffff
-                      /* RAS park control reg 0(cc), park access enable is set */
-		      
-        HOST_RDBUF_CTL |= 0x10000000		(0x70)
-	               &= 0x10ffffff
-                      /* host read buffer control reg, enable prefetch for CPU read from DRAM control */
-
-        HBUS_ACC_CTL_0 |= 0x0100001f		(0x5c)
-		       &= 0xf1ffffff
-                      /* host bus access control register, enable CPU address bus pipe control	*/
-                      /* two outstanding requests,  *** changed to 2 from 3				*/
-                      /* enable line merge write control for CPU write to system memory, PCI 1	*/
-                      /* and PCI 0 bus memory; enable page merge write control for write to		*/
-                      /* PCI bus 0 & bus 1 memory							*/
-
-        SRAM_CTL |= 0x00004000			(0xc8)
-		 &= 0xffbff7ff
-                      /* DRAM detail timing control register 1 (ca), bit 3 set to 0	*/
-                      /* DRAM start access latency control - wait for one clock	*/
-                      /* ff9f changed to ffbf						*/
-    
-        DIM0_TIM_CTL_0 = 0x737d737d             (0xc9)
-                      /* DRAM timing control for dimm0 & dimm1; set wait one clock	*/
-                      /* cycle for next data access 					*/
-
-        DIM2_TIM_CTL_0 = 0x737d737d             (0xca)
-                      /* DRAM timing control for dimm2 & dimm3; set wait one clock	*/
-                      /* cycle for next data access 					*/
-
-        DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB    (0x90)
-	              /* set dimm0 bank0 for 128 MB	*/
-
-        DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB    (0x94)
-                      /* set dimm0 for  bank1		*/
-
-        DIM0_TIM_CTL_0 = 0xf3bf0000             (0xc9)
-                      /* dimm0 timing control register; RAS - CAS latency - 4 clock		*/
-                      /* CAS access latency - 3 wait; pre-charge latency - 3 wait		*/
-                      /* pre-charge command period control - 5 clock; wait one clock		*/
-                      /* cycle for next data access; read to write access latency control	*/
-                      /* - 2 clock cycles							*/
-
-        DRAM_GBL_CTL_0 |= 0x00000100            (0xc0)
-		       &= 0xffff01ff
-                      /* memory global control register - support buffer sdram on bank 0	*/
-
-        DRAM_ECC_CTL_0 |= 0x00260000		(0xc4)
-		       &= 0xff26ffff
-                      /* enable ECC; enable read, modify, write control	*/
- 
-        DRAM_REF_CTL_0 = DRAM_REF_DATA          (0xb8)
-		      /* set DRAM refresh parameters *** changed to 00940100	*/
-
-        nop
-        nop
-        nop
-        nop
-        nop
-
-        DRAM_ECC_CTL_0 |= 0x20243280		(0xc4)
-                      /* turn off ecc		*/
-                      /* for SDRAM bank 0	*/
-
-        DRAM_ECC_CTL_0 |= 0x20243290            (0xc4) ?
-                      /* for SDRAM bank 1	*/
- 
-
-/* Additional Stuff...*/
-
-        GLOBL_CTRL |= 0x20000b00		(0x54)
-
-        PCI_0_SB_CONFIG |= 0x04100007		(0xd0)
-                      /* PCI 0 Side band config reg*/
-
-        0x8000083c |= 0x00080000
-                      /* Disable VGA decode on PCI Bus 1 */
-
-
-/*End Additional Stuff..*/
-
-        /*--------------------------------------------------------------*/
-        /*              TERON serial port initialization code           */
-        /*--------------------------------------------------------------*/
-
-	0x84380080 |= 0x00030000
-                     /* enable super IO configuration VIA chip Register 85	*/
-		     /* Enable super I/O config mode */
-
-        0xfe0003f0 = 0xe2
-        bl delay1
-
-        0xfe0003f1 = 0x0f
-	bl delay1
-	            /* enable com1 & com2, parallel port disabled */ 
-	
-	0xfe0003f0 = 0xe7
-        bl delay1
-	            /* let's make com1 base as 0x3f8 */
-        
-        0xfe0003f1 = 0xfe
-        bl delay1
-
-        0xfe0003f0 = 0xe8
-        bl delay1           
-		    /* let's make com2 base as 0x2f8 */
-
-	0xfe0003f1 = 0xbe
-
-	0x84380080 &= 0xfffdffff
-                    /* closing super IO configuration VIA chip Register 85   */
-     
-
-/* -------------------------------*/
-
-        0xfe0003fb = 0x83
-	bl delay1
-                   /*latch enable word length -8 bit */         /* set mslab bit	*/
-        0xfe0003f8 = 0x0c
-	bl delay1
-                   /* set baud rate lsb for 9600 baud	*/
-        0xfe0003f9 = 0x0
-	bl delay1
-                   /* set baud rate msb for 9600 baud	*/
-        0xfe0003fb  = 0x03
-	bl delay1
-                      /* reset mslab	*/
-
-	/*--------------------------------------------------------------*/
-        /*              END TERON Serial Port Initialization Code       */
-        /*--------------------------------------------------------------*/
-
-   
-
-        /*--------------------------------------------------------------*/
-        /*      END TERON Articia / SDRAM Initialization code           */
-        /*--------------------------------------------------------------*/
-
-Proposed from Documentation:
-
-write dmem 0xfec00cf8 0x50000080
-write dmem 0xfee00cfc 0xc0305411
-
-      Writes to index 0x50-0x53. 
-      0x50: Global Information Register 0
-	    0xC0 = Little Endian CPU, Sequential order Burst
-      0x51: Global Information Register 1
-	    Read only, 0x30 = Provides PowerPC and X86 support
-      0x52: Global Information Register 2
-	    0x05 = 64/128 bit CPU bus support
-      0x53: Global Information Register 3
-	    0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted
-
-write dmem 0xfec00cf8 0x5c000080
-write dmem 0xfee00cfc 0xb300011F
-
-write dmem 0xfec00cf8 0xc8000080
-write dmem 0xfee00cfc 0x0020f100
-
-write dmem 0xfec00cf8 0x90000080
-write dmem 0xfee00cfc 0x007fe700
-
-write dmem 0xfec00cf8 0x9400080
-write dmem 0xfee00cfc 0x007fe700
-
-write dmem 0xfec00cf8 0xb0000080
-write dmem 0xfee00cfc 0x737d737d
-
-write dmem 0xfec00cf8 0xb4000080
-write dmem 0xfee00cfc 0x737d737d
-
-write dmem 0xfec00cf8 0xc0000080
-write dmem 0xfee00cfc 0x40005500
-
-write dmem 0xfec00cf8 0xb8000080
-write dmem 0xfee00cfc 0x00940100
-
-write dmem 0xfec00cf8 0xc4000080
-write dmem 0xfee00cfc 0x00003280
-
-write dmem 0xfec00cf8 0xc4000080
-write dmem 0xfee00cfc 0x00003290
-
-
+
+	/*------------------------------------------------------*/
+	/*              TERON Articia / SDRAM Init              */
+	/*------------------------------------------------------*/
+
+*       XD_CTL  = 0x81000000			(0x74)
+
+*       HBUS_ACC_CTL_0 &= 0xFFFFFDFF		(0x5c)
+		       /* host bus access ctl reg 2(5e) */
+		       /* set - CPU read from memory data one clock after data is latched */
+
+*       GLOBL_INFO_0 |= 0x00004000		(0x50)
+		      /* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */
+
+	PCI_1_SB_CONFIG_0 |= 0x00000400         (0x80d0)
+			/* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */
+
+	MEM_RAS_CTL_0 |= 0x3f000000		(0xcc)
+		      &= 0x3fffffff
+		      /* RAS park control reg 0(cc), park access enable is set */
+
+	HOST_RDBUF_CTL |= 0x10000000		(0x70)
+		       &= 0x10ffffff
+		      /* host read buffer control reg, enable prefetch for CPU read from DRAM control */
+
+	HBUS_ACC_CTL_0 |= 0x0100001f		(0x5c)
+		       &= 0xf1ffffff
+		      /* host bus access control register, enable CPU address bus pipe control	*/
+		      /* two outstanding requests,  *** changed to 2 from 3				*/
+		      /* enable line merge write control for CPU write to system memory, PCI 1	*/
+		      /* and PCI 0 bus memory; enable page merge write control for write to		*/
+		      /* PCI bus 0 & bus 1 memory							*/
+
+	SRAM_CTL |= 0x00004000			(0xc8)
+		 &= 0xffbff7ff
+		      /* DRAM detail timing control register 1 (ca), bit 3 set to 0	*/
+		      /* DRAM start access latency control - wait for one clock	*/
+		      /* ff9f changed to ffbf						*/
+
+	DIM0_TIM_CTL_0 = 0x737d737d             (0xc9)
+		      /* DRAM timing control for dimm0 & dimm1; set wait one clock	*/
+		      /* cycle for next data access 					*/
+
+	DIM2_TIM_CTL_0 = 0x737d737d             (0xca)
+		      /* DRAM timing control for dimm2 & dimm3; set wait one clock	*/
+		      /* cycle for next data access 					*/
+
+	DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB    (0x90)
+		      /* set dimm0 bank0 for 128 MB	*/
+
+	DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB    (0x94)
+		      /* set dimm0 for  bank1		*/
+
+	DIM0_TIM_CTL_0 = 0xf3bf0000             (0xc9)
+		      /* dimm0 timing control register; RAS - CAS latency - 4 clock		*/
+		      /* CAS access latency - 3 wait; pre-charge latency - 3 wait		*/
+		      /* pre-charge command period control - 5 clock; wait one clock		*/
+		      /* cycle for next data access; read to write access latency control	*/
+		      /* - 2 clock cycles							*/
+
+	DRAM_GBL_CTL_0 |= 0x00000100            (0xc0)
+		       &= 0xffff01ff
+		      /* memory global control register - support buffer sdram on bank 0	*/
+
+	DRAM_ECC_CTL_0 |= 0x00260000		(0xc4)
+		       &= 0xff26ffff
+		      /* enable ECC; enable read, modify, write control	*/
+
+	DRAM_REF_CTL_0 = DRAM_REF_DATA          (0xb8)
+		      /* set DRAM refresh parameters *** changed to 00940100	*/
+
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	DRAM_ECC_CTL_0 |= 0x20243280		(0xc4)
+		      /* turn off ecc		*/
+		      /* for SDRAM bank 0	*/
+
+	DRAM_ECC_CTL_0 |= 0x20243290            (0xc4) ?
+		      /* for SDRAM bank 1	*/
+
+
+/* Additional Stuff...*/
+
+	GLOBL_CTRL |= 0x20000b00		(0x54)
+
+	PCI_0_SB_CONFIG |= 0x04100007		(0xd0)
+		      /* PCI 0 Side band config reg*/
+
+	0x8000083c |= 0x00080000
+		      /* Disable VGA decode on PCI Bus 1 */
+
+
+/*End Additional Stuff..*/
+
+	/*--------------------------------------------------------------*/
+	/*              TERON serial port initialization code           */
+	/*--------------------------------------------------------------*/
+
+	0x84380080 |= 0x00030000
+		     /* enable super IO configuration VIA chip Register 85	*/
+		     /* Enable super I/O config mode */
+
+	0xfe0003f0 = 0xe2
+	bl delay1
+
+	0xfe0003f1 = 0x0f
+	bl delay1
+		    /* enable com1 & com2, parallel port disabled */
+
+	0xfe0003f0 = 0xe7
+	bl delay1
+		    /* let's make com1 base as 0x3f8 */
+
+	0xfe0003f1 = 0xfe
+	bl delay1
+
+	0xfe0003f0 = 0xe8
+	bl delay1
+		    /* let's make com2 base as 0x2f8 */
+
+	0xfe0003f1 = 0xbe
+
+	0x84380080 &= 0xfffdffff
+		    /* closing super IO configuration VIA chip Register 85   */
+
+
+/* -------------------------------*/
+
+	0xfe0003fb = 0x83
+	bl delay1
+		   /*latch enable word length -8 bit */         /* set mslab bit	*/
+	0xfe0003f8 = 0x0c
+	bl delay1
+		   /* set baud rate lsb for 9600 baud	*/
+	0xfe0003f9 = 0x0
+	bl delay1
+		   /* set baud rate msb for 9600 baud	*/
+	0xfe0003fb  = 0x03
+	bl delay1
+		      /* reset mslab	*/
+
+	/*--------------------------------------------------------------*/
+	/*              END TERON Serial Port Initialization Code       */
+	/*--------------------------------------------------------------*/
+
+
+	/*--------------------------------------------------------------*/
+	/*      END TERON Articia / SDRAM Initialization code           */
+	/*--------------------------------------------------------------*/
+
+Proposed from Documentation:
+
+write dmem 0xfec00cf8 0x50000080
+write dmem 0xfee00cfc 0xc0305411
+
+      Writes to index 0x50-0x53.
+      0x50: Global Information Register 0
+	    0xC0 = Little Endian CPU, Sequential order Burst
+      0x51: Global Information Register 1
+	    Read only, 0x30 = Provides PowerPC and X86 support
+      0x52: Global Information Register 2
+	    0x05 = 64/128 bit CPU bus support
+      0x53: Global Information Register 3
+	    0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted
+
+write dmem 0xfec00cf8 0x5c000080
+write dmem 0xfee00cfc 0xb300011F
+
+write dmem 0xfec00cf8 0xc8000080
+write dmem 0xfee00cfc 0x0020f100
+
+write dmem 0xfec00cf8 0x90000080
+write dmem 0xfee00cfc 0x007fe700
+
+write dmem 0xfec00cf8 0x9400080
+write dmem 0xfee00cfc 0x007fe700
+
+write dmem 0xfec00cf8 0xb0000080
+write dmem 0xfee00cfc 0x737d737d
+
+write dmem 0xfec00cf8 0xb4000080
+write dmem 0xfee00cfc 0x737d737d
+
+write dmem 0xfec00cf8 0xc0000080
+write dmem 0xfee00cfc 0x40005500
+
+write dmem 0xfec00cf8 0xb8000080
+write dmem 0xfee00cfc 0x00940100
+
+write dmem 0xfec00cf8 0xc4000080
+write dmem 0xfee00cfc 0x00003280
+
+write dmem 0xfec00cf8 0xc4000080
+write dmem 0xfee00cfc 0x00003290