diff options
Diffstat (limited to 'board/MAI/AmigaOneG3SE/board_asm_init.S')
| -rw-r--r-- | board/MAI/AmigaOneG3SE/board_asm_init.S | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/board/MAI/AmigaOneG3SE/board_asm_init.S b/board/MAI/AmigaOneG3SE/board_asm_init.S new file mode 100644 index 0000000000..a421c5dc43 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/board_asm_init.S @@ -0,0 +1,157 @@ + #include "macros.h" + + + +#define GLOBALINFO0 0x50 +#define GLOBALINFO0_BO (1<<7) +#define GLOBALINFO2_B1ARBITER (1<<6) +#define HBUSACR0 0x5c +#define HBUSACR2_BURST (1<<0) +#define HBUSACR2_LAT (1<<1) + +#define RECEIVER_HOLDING 0 +#define TRANSMITTER_HOLDING 0 +#define INTERRUPT_ENABLE 1 +#define INTERRUPT_STATUS 2 +#define FIFO_CONTROL 2 +#define LINE_CONTROL 3 +#define MODEM_CONTROL 4 +#define LINE_STATUS 5 +#define MODEM_STATUS 6 +#define SCRATCH_PAD 7 + +#define DIVISOR_LATCH_LSB 0 +#define DIVISOR_LATCH_MSB 1 +#define PRESCALER_DIVISION 5 + +#define UART(x) (0x3f8+(x)) + +#define GLOBALINFO0 0x50 +#define GLOBALINFO0_BO (1<<7) +#define GLOBALINFO2_B1ARBITER (1<<6) +#define HBUSACR0 0x5c +#define HBUSACR2_BURST (1<<0) +#define HBUSACR2_LAT (1<<1) + +#define SUPERIO_1 ((7 << 3) | (0)) +#define SUPERIO_2 ((7 << 3) | (1)) + + .globl board_asm_init + +board_asm_init: + mflr r29 + /* Set 'Must-set' register */ + li r3, 0 + li r4, 0 + li r5, 0x5e + bl pci_read_cfg_byte + ori r3, r3, (1<<1) + xori r6, r3, (1<<1) + li r3, 0 + bl pci_write_cfg_byte + + li r3, 0 + li r5, 0x52 + bl pci_read_cfg_byte + ori r6, r3, (1<<6) + li r3, 0 + bl pci_write_cfg_byte + + li r3, 0 + li r4, 0x08 + li r5, 0xd2 + bl pci_read_cfg_byte + ori r6, r3, (1<<2) + li r3, 0 + bl pci_write_cfg_byte + + + /* Do PCI reset */ +/* li r3, 0 + li r4, 0x38 + li r5, 0x47 + bl pci_read_cfg_byte + ori r6, r3, 0x01 + li r3, 0 + li r4, 0x38 + li r5, 0x47 + bl pci_write_cfg_byte*/ + + + /* Enable NVRAM for environment */ + li r3, 0 + li r4, 0 + li r5, 0x56 + li r6, 0x0B + bl pci_write_cfg_byte + + + /* Init Super-I/O chips */ + + siowb 0x40, 0x08 + siowb 0x41, 0x01 + siowb 0x45, 0x80 + siowb 0x46, 0x60 + siowb 0x47, 0x20 + siowb 0x48, 0x01 + siowb 0x4a, 0xc4 + siowb 0x50, 0x0e + siowb 0x51, 0x76 + siowb 0x52, 0x34 + siowb 0x54, 0x00 + siowb 0x55, 0x90 + siowb 0x56, 0x99 + siowb 0x57, 0x90 + siowb 0x85, 0x01 + + /* Enable configuration mode for SuperIO */ + li r3, 0 + li r4, (7<<3) + li r5, 0x85 + bl pci_read_cfg_byte + ori r6, r3, 0x02 + mr r31, r6 + li r3,0 + bl pci_write_cfg_byte + + /* COM1 as 3f8 */ + outb 0x3f0, 0xe7 + outb 0x3f1, 0xfe + + /* COM2 as 2f8 */ + outb 0x3f0, 0xe8 + outb 0x3f1, 0xeb + + /* Enable */ + outb 0x3f0, 0xe2 + inb r3, 0x3f1 + ori r3, r3, 0x0c + outb 0x3f0, 0xe2 + outbr 0x3f1, r3 + + /* Disable configuration mode */ + li r3, 0 + li r4, (7<<3) + li r5, 0x85 + mr r6, r31 + bl pci_write_cfg_byte + + /* Set line control */ + outb UART(LINE_CONTROL), 0x83 + outb UART(DIVISOR_LATCH_LSB), 0x0c + outb UART(DIVISOR_LATCH_MSB), 0x00 + outb UART(LINE_CONTROL), 0x3 + + mtlr r29 + blr + + + .globl new_reset + .globl new_reset_end +new_reset: + li r0, 0x100 + oris r0, r0, 0xFFF0 + mtlr r0 + blr + +new_reset_end:
\ No newline at end of file |
