diff options
Diffstat (limited to 'board/LaCie/edminiv2/edminiv2.c')
| -rw-r--r-- | board/LaCie/edminiv2/edminiv2.c | 70 |
1 files changed, 20 insertions, 50 deletions
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index 80ec7faa04..edf6281797 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -12,59 +12,11 @@ #include <miiphy.h> #include <asm/arch/orion5x.h> #include "../common/common.h" +#include <spl.h> +#include <ns16550.h> DECLARE_GLOBAL_DATA_PTR; -/* - * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH - * which CFI does not properly detect, hence the LEGACY config. - */ -#if defined(CONFIG_FLASH_CFI_LEGACY) -#include <flash.h> -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - int sectsz[] = CONFIG_SYS_FLASH_SECTSZ; - int sect; - - if (base != CONFIG_SYS_FLASH_BASE) - return 0; - - info->size = 0; - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - /* set each sector's start address and size based */ - for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) { - info->start[sect] = base+info->size; - info->size += sectsz[sect]; - } - /* This flash must be accessed in 8-bits mode, no buffer. */ - info->flash_id = 0x01000000; - info->portwidth = FLASH_CFI_8BIT; - info->chipwidth = FLASH_CFI_BY8; - info->buffer_size = 0; - /* timings are derived from the Macronix datasheet. */ - info->erase_blk_tout = 1000; - info->write_tout = 10; - info->buffer_write_tout = 300; - /* Commands and addresses are for AMD mode 8-bit access. */ - info->vendor = CFI_CMDSET_AMD_LEGACY; - info->cmd_reset = 0xF0; - info->interface = FLASH_CFI_X8; - info->legacy_unlock = 0; - info->ext_addr = 0; - info->addr_unlock1 = 0x00000aaa; - info->addr_unlock2 = 0x00000555; - /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */ - info->manufacturer_id = 0x22; - info->device_id = 0xBA; - info->device_id2 = 0; - info->cfi_version = 0x3133; - info->cfi_offset = 0x0000; - info->name = "MX29LV400CB"; - - return 1; -} -#endif /* CONFIG_SYS_FLASH_CFI */ - int board_init(void) { /* arch number of board */ @@ -83,3 +35,21 @@ void reset_phy(void) mv_phy_88e1116_init("egiga0", 8); } #endif /* CONFIG_RESET_PHY_R */ + +/* + * SPL serial setup and NOR boot device selection + */ + +#ifdef CONFIG_SPL_BUILD + +void spl_board_init(void) +{ + preloader_console_init(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NOR; +} + +#endif /* CONFIG_SPL_BUILD */ |
