diff options
Diffstat (limited to 'board/BuR/tseries/mux.c')
| -rw-r--r-- | board/BuR/tseries/mux.c | 23 |
1 files changed, 19 insertions, 4 deletions
diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c index 0ba25ee318..2c87a63b85 100644 --- a/board/BuR/tseries/mux.c +++ b/board/BuR/tseries/mux.c @@ -25,6 +25,13 @@ static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, {-1}, }; +static struct module_pin_mux uart1_pin_mux[] = { + /* UART0_RXD */ + {OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* UART0_TXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, + {-1}, +}; #ifdef CONFIG_MMC static struct module_pin_mux mmc1_pin_mux[] = { {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */ @@ -131,9 +138,9 @@ static struct module_pin_mux gpIOs[] = { {OFFSET(spi0_cs1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* TIMER5 (MMC0_DAT3) - TIMER5 (Buzzer) */ {OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)}, - /* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */ - {OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)}, - /* GPIO2_27 (MMC0_DAT1) - MII_nNAND */ + /* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3 */ + {OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN | RXACTIVE)}, + /* GPIO2_28 (MMC0_DAT1) - MII_nNAND */ {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)}, /* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */ {OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)}, @@ -168,7 +175,14 @@ static struct module_pin_mux gpIOs[] = { {OFFSET(mcasp0_axr0), (MODE(7) | PULLUDDIS) }, /* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */ {OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) }, - +#ifndef CONFIG_NAND + /* GPIO2_3 - NAND_OE */ + {OFFSET(gpmc_oen_ren), (MODE(7) | PULLDOWN_EN | RXACTIVE)}, + /* GPIO2_4 - NAND_WEN */ + {OFFSET(gpmc_wen), (MODE(7) | PULLDOWN_EN | RXACTIVE)}, + /* GPIO2_5 - NAND_BE_CLE */ + {OFFSET(gpmc_be0n_cle), (MODE(7) | PULLDOWN_EN | RXACTIVE)}, +#endif {-1}, }; @@ -229,5 +243,6 @@ void enable_board_pin_mux(void) #endif configure_module_pin_mux(spi0_pin_mux); configure_module_pin_mux(lcd_pin_mux); + configure_module_pin_mux(uart1_pin_mux); configure_module_pin_mux(gpIOs); } |
