diff options
Diffstat (limited to 'arch')
57 files changed, 1124 insertions, 445 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b9ac59e1a4..0982117fad 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -793,6 +793,7 @@ config ARCH_UNIPHIER bool "Panasonic UniPhier platform" select CPU_V7 select SUPPORT_SPL + select OF_CONTROL if !SPL_BUILD endchoice diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index e9a102ce3c..f3eadb4db3 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -46,11 +46,16 @@ config TARGET_SMDK5420 select SUPPORT_SPL select OF_CONTROL if !SPL_BUILD -config TARGET_PEACH_PIT +config TARGET_PEACH_PI bool "Peach Pi board" select SUPPORT_SPL select OF_CONTROL if !SPL_BUILD +config TARGET_PEACH_PIT + bool "Peach Pit board" + select SUPPORT_SPL + select OF_CONTROL if !SPL_BUILD + endchoice config SYS_SOC diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index c0c95fbc83..8fab135beb 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -118,7 +118,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) div = PLL_DIV_1024; else if (proid_is_exynos4412()) div = PLL_DIV_65535; - else if (proid_is_exynos5250() || proid_is_exynos5420()) + else if (proid_is_exynos5250() || proid_is_exynos5420() + || proid_is_exynos5800()) div = PLL_DIV_65536; else return 0; @@ -1581,7 +1582,7 @@ static unsigned long exynos4_get_i2c_clk(void) unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_pll_clk(pllreg); return exynos5_get_pll_clk(pllreg); } else { @@ -1617,7 +1618,7 @@ unsigned long get_i2c_clk(void) unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_pwm_clk(); return clock_get_periph_rate(PERIPH_ID_PWM0); } else { @@ -1630,7 +1631,7 @@ unsigned long get_pwm_clk(void) unsigned long get_uart_clk(int dev_index) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_uart_clk(dev_index); return exynos5_get_uart_clk(dev_index); } else { @@ -1643,7 +1644,7 @@ unsigned long get_uart_clk(int dev_index) unsigned long get_mmc_clk(int dev_index) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_mmc_clk(dev_index); return exynos5_get_mmc_clk(dev_index); } else { @@ -1654,7 +1655,7 @@ unsigned long get_mmc_clk(int dev_index) void set_mmc_clk(int dev_index, unsigned int div) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_set_mmc_clk(dev_index, div); else exynos5_set_mmc_clk(dev_index, div); @@ -1668,7 +1669,7 @@ unsigned long get_lcd_clk(void) if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); else { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_get_lcd_clk(); else return exynos5_get_lcd_clk(); @@ -1682,7 +1683,7 @@ void set_lcd_clk(void) else { if (proid_is_exynos5250()) exynos5_set_lcd_clk(); - else if (proid_is_exynos5420()) + else if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_set_lcd_clk(); } } @@ -1696,7 +1697,7 @@ void set_mipi_clk(void) int set_spi_clk(int periph_id, unsigned int rate) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_set_spi_clk(periph_id, rate); return exynos5_set_spi_clk(periph_id, rate); } else { diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index b6a9bc1831..0aff3d0d0c 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -971,7 +971,7 @@ static void exynos5420_system_clock_init(void) void system_clock_init(void) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) exynos5420_system_clock_init(); else exynos5250_system_clock_init(); diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index b86dd2d650..7c0b12ae51 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) + DMC_OFFSET); pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE; + if (CONFIG_NR_DRAM_BANKS > 4) { + /* Need both controllers. */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2; + mem->chips_per_channel = 2; + mem->chips_to_configure = 2; + } else { + /* 2GB requires a single controller */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1; + } + /* Enable PAUSE for DREX */ setbits_le32(&clk->pause, ENABLE_BIT); @@ -832,6 +842,25 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG); setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG); + /* + * As per Exynos5800 UM ver 0.00 section 17.13.2.1 + * CONCONTROL register bit 3 [update_mode], Exynos5800 does not + * support the PHY initiated update. And it is recommended to set + * this field to 1'b1 during initialization + * + * When we apply PHY-initiated mode, DLL lock value is determined + * once at DMC init time and not updated later when we change the MIF + * voltage based on ASV group in kernel. Applying MC-initiated mode + * makes sure that DLL tracing is ON so that silicon is able to + * compensate the voltage variation. + */ + val = readl(&drex0->concontrol); + val |= CONCONTROL_UPDATE_MODE; + writel(val , &drex0->concontrol); + val = readl(&drex1->concontrol); + val |= CONCONTROL_UPDATE_MODE; + writel(val , &drex1->concontrol); + return 0; } #endif diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 3d95dc3339..94d0297051 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -837,7 +837,7 @@ static int exynos4x12_pinmux_config(int peripheral, int flags) int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_pinmux_config(peripheral, flags); else if (proid_is_exynos5250()) return exynos5_pinmux_config(peripheral, flags); diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index e1ab3d6997..1520d642c5 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -53,10 +53,37 @@ void exynos5_set_usbhost_phy_ctrl(unsigned int enable) } } +void exynos4412_set_usbhost_phy_ctrl(unsigned int enable) +{ + struct exynos4412_power *power = + (struct exynos4412_power *)samsung_get_base_power(); + + if (enable) { + /* Enabling USBHOST_PHY */ + setbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + setbits_le32(&power->hsic1_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + setbits_le32(&power->hsic2_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } else { + /* Disabling USBHOST_PHY */ + clrbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + clrbits_le32(&power->hsic1_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + clrbits_le32(&power->hsic2_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } +} + void set_usbhost_phy_ctrl(unsigned int enable) { if (cpu_is_exynos5()) exynos5_set_usbhost_phy_ctrl(enable); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_set_usbhost_phy_ctrl(enable); } static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable) diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index ae3ad0167d..bc237c969f 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -195,10 +195,16 @@ void copy_uboot_to_ram(void) void (*end_bootop_from_emmc)(void); #endif #ifdef CONFIG_USB_BOOTING - u32 (*usb_copy)(void); int is_cr_z_set; unsigned int sec_boot_check; + /* + * Note that older hardware (before Exynos5800) does not expect any + * arguments, but it does not hurt to pass them, so a common function + * prototype is used. + */ + u32 (*usb_copy)(u32 num_of_block, u32 *dst); + /* Read iRAM location to check for secondary USB boot mode */ sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE); if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT) @@ -240,7 +246,7 @@ void copy_uboot_to_ram(void) */ is_cr_z_set = config_branch_prediction(0); usb_copy = get_irom_func(USB_INDEX); - usb_copy(); + usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE); config_branch_prediction(is_cr_z_set); break; #endif diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index a0e49d179f..49f4032e9c 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -180,6 +180,21 @@ void clock_set_pll1(unsigned int hz) } #endif +void clock_set_pll3(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (clk == 0) { + clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); + return; + } + + /* PLL3 rate = 3000000 * m */ + writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | + CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg); +} + unsigned int clock_get_pll5p(void) { struct sunxi_ccm_reg *const ccm = @@ -200,3 +215,15 @@ unsigned int clock_get_pll6(void) int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; return 24000000 * n * k / 2; } + +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) +{ + int pll = clock_get_pll5p(); + int div = 1; + + while ((pll / div) > hz) + div++; + + writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P | + CCM_DE_CTRL_M(div), clk_cfg); +} diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 16ab6f3729..8e949c6901 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -127,6 +127,23 @@ void clock_set_pll1(unsigned int clk) } #endif +void clock_set_pll3(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */ + + if (clk == 0) { + clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN); + return; + } + + /* PLL3 rate = 24000000 * n / m */ + writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE | + CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m), + &ccm->pll3_cfg); +} + void clock_set_pll5(unsigned int clk) { struct sunxi_ccm_reg * const ccm = @@ -151,3 +168,15 @@ unsigned int clock_get_pll6(void) int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; return 24000000 * n * k / 2; } + +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz) +{ + int pll = clock_get_pll6() * 2; + int div = 1; + + while ((pll / div) > hz) + div++; + + writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div), + clk_cfg); +} diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c index dc9fdb930b..ec8aaa7d48 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun4i.c @@ -428,9 +428,9 @@ static void dramc_clock_output_en(u32 on) #ifdef CONFIG_MACH_SUN4I struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; if (on) - setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); + setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT); else - clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); + clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT); #endif } diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c index 10a62416d2..699173cf69 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c @@ -142,9 +142,6 @@ static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para) writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST, &mctl_phy->ptr0); - /* Unknown magic performed by boot0 */ - if ((readl(SUNXI_RTC_BASE + 0x20c) & 3) == 2) - setbits_le32(&mctl_phy->ptr0, 1 << 18); writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1); writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2); diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 62f5b0148d..9d51299308 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 74129bc86a..fd1c432f4f 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 1843d0469f..31ee2a2100 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 72ec599f69..ea0691dd67 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ba6dec930b..01df9a9f0e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ - exynos5420-peach-pit.dtb + exynos5420-peach-pit.dtb \ + exynos5800-peach-pi.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -31,6 +32,10 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra114-dalmore.dtb \ tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 2a1f1dda4e..c78efec649 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -67,4 +67,15 @@ div = <0x3>; index = <4>; }; + + ehci@12580000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12580000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x125B0000 0x100>; + }; + }; }; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index 6fd9275c4e..95af02534c 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -131,11 +131,11 @@ }; ehci@12110000 { - samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */ + samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ }; xhci@12000000 { - samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */ + samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ }; tmu@10060000 { diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts new file mode 100644 index 0000000000..8aedf8e707 --- /dev/null +++ b/arch/arm/dts/exynos5800-peach-pi.dts @@ -0,0 +1,157 @@ +/* + * SAMSUNG/GOOGLE Peach-Pit board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "exynos54xx.dtsi" + +/ { + model = "Samsung/Google Peach Pi board based on Exynos5800"; + + compatible = "google,pit-rev#", "google,pit", + "google,peach", "samsung,exynos5800", "samsung,exynos5"; + + config { + google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */ + hwid = "PIT TEST A-A 7848"; + lazy-init = <1>; + }; + + aliases { + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + pmic = "/i2c@12ca0000"; + }; + + dmc { + mem-manuf = "samsung"; + mem-type = "ddr3"; + clock-frequency = <800000000>; + arm-frequency = <1700000000>; + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + /* MAX77802 is on i2c bus 4 */ + i2c@12ca0000 { + clock-frequency = <400000>; + power-regulator@9 { + compatible = "maxim,max77802-pmic"; + reg = <0x9>; + }; + }; + + i2c@12cd0000 { /* i2c7 */ + clock-frequency = <100000>; + soundcodec@20 { + reg = <0x20>; + compatible = "maxim,max98090-codec"; + }; + + edp-lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + }; + }; + + sound@3830000 { + samsung,codec-type = "max98090"; + }; + + i2c@12e10000 { /* i2c9 */ + clock-frequency = <400000>; + tpm@20 { + compatible = "infineon,slb9645-tpm"; + reg = <0x20>; + }; + }; + + spi@12d30000 { /* spi1 */ + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + reg = <0>; + + /* + * A region for the kernel to store a panic event + * which the firmware will add to the log. + */ + elog-panic-event-offset = <0x01e00000 0x100000>; + + elog-shrink-size = <0x400>; + elog-full-threshold = <0xc00>; + }; + }; + + spi@12d40000 { /* spi2 */ + spi-max-frequency = <4000000>; + spi-deactivate-delay = <200>; + cros-ec@0 { + reg = <0>; + compatible = "google,cros-ec"; + spi-half-duplex; + spi-max-timeout-ms = <1100>; + spi-frame-header = <0xec>; + ec-interrupt = <&gpio 93 1>; /* GPX1_5 */ + + /* + * This describes the flash memory within the EC. Note + * that the STM32L flash erases to 0, not 0xff. + */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0>; + }; + }; + }; + + xhci@12000000 { + samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */ + }; + + xhci@12400000 { + samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */ + }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <1920>; + samsung,vl-row = <1080>; + samsung,vl-width = <1920>; + samsung,vl-height = <1080>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <80>; + samsung,vl-hbpd = <172>; + samsung,vl-hfpd = <60>; + samsung,vl-vspw = <10>; + samsung,vl-vbpd = <25>; + samsung,vl-vfpd = <10>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <3>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts new file mode 100644 index 0000000000..f01189c993 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-LD4 Reference Board"; + compatible = "panasonic,ph1-ld4-ref", "panasonic,ph1-ld4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi new file mode 100644 index 0000000000..80074c50b5 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-ld4"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <36864000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <36864000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <36864000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <36864000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts new file mode 100644 index 0000000000..52fa81fae1 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-Pro4 Reference Board"; + compatible = "panasonic,ph1-pro4-ref", "panasonic,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi new file mode 100644 index 0000000000..dd84269d1a --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-pro4"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <73728000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <73728000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <73728000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <73728000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts new file mode 100644 index 0000000000..ac73aad928 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld8.dtsi" + +/ { + model = "Panasonic UniPhier PH1-sLD8 Reference Board"; + compatible = "panasonic,ph1-sld8-ref", "panasonic,ph1-sld8"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi new file mode 100644 index 0000000000..43a39f5a4c --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-sld8"; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <80000000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <80000000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <80000000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <80000000>; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + }; +}; diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 78aceef17b..29674ad4da 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -227,6 +227,13 @@ static inline void s5p_set_cpu_id(void) /* Exynos5420 */ s5p_cpu_id = 0x5420; break; + case 0x422: + /* + * Exynos5800 is a variant of Exynos5420 + * and has product id 0x5422 + */ + s5p_cpu_id = 0x5800; + break; } } @@ -255,6 +262,7 @@ IS_EXYNOS_TYPE(exynos4210, 0x4210) IS_EXYNOS_TYPE(exynos4412, 0x4412) IS_EXYNOS_TYPE(exynos5250, 0x5250) IS_EXYNOS_TYPE(exynos5420, 0x5420) +IS_EXYNOS_TYPE(exynos5800, 0x5800) #define SAMSUNG_BASE(device, base) \ static inline unsigned int __attribute__((no_instrument_function)) \ @@ -265,7 +273,7 @@ static inline unsigned int __attribute__((no_instrument_function)) \ return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ } else if (cpu_is_exynos5()) { \ - if (proid_is_exynos5420()) \ + if (proid_is_exynos5420() || proid_is_exynos5800()) \ return EXYNOS5420_##base; \ return EXYNOS5_##base; \ } \ diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index ec3f9b6ee1..4990a1af39 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -450,6 +450,7 @@ enum mem_manuf { #define CONCONTROL_RD_FETCH_SHIFT 12 #define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) #define CONCONTROL_AREF_EN_SHIFT 5 +#define CONCONTROL_UPDATE_MODE (1 << 3) /* PRECHCONFIG register field */ #define PRECHCONFIG_TP_CNT_SHIFT 24 diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d2d70bd82b..3800fa9044 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -12,6 +12,13 @@ #define CLK_24MHZ 5 +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) +#define RSTCON_HOSTPHY_SWRST (0xf << 3) +#define RSTCON_SWRST (0x1 << 0) + #define HOST_CTRL0_PHYSWRSTALL (1 << 31) #define HOST_CTRL0_COMMONON_N (1 << 9) #define HOST_CTRL0_SIDDQ (1 << 6) @@ -61,6 +68,12 @@ struct exynos_usb_phy { unsigned int usbotgtune; }; +struct exynos4412_usb_phy { + unsigned int usbphyctrl; + unsigned int usbphyclk; + unsigned int usbphyrstcon; +}; + /* Switch on the VBUS power. */ int board_usb_vbus_init(void); diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 02287decc2..9699954a7d 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -1398,7 +1398,7 @@ static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = { static inline struct gpio_info *get_gpio_data(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_gpio_data; else return exynos5_gpio_data; @@ -1415,7 +1415,7 @@ static inline struct gpio_info *get_gpio_data(void) static inline unsigned int get_bank_num(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return EXYNOS5420_GPIO_NUM_PARTS; else return EXYNOS5_GPIO_NUM_PARTS; diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e8a98a5471..3f97b31aea 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -210,6 +210,13 @@ struct exynos4_power { unsigned int gps_alive_option; }; +struct exynos4412_power { + unsigned char res1[0x0704]; + unsigned int usbhost_phy_control; + unsigned int hsic1_phy_control; + unsigned int hsic2_phy_control; +}; + struct exynos5_power { unsigned int om_stat; unsigned char res1[0x18]; diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index f2c9687df4..ba86eea040 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -27,7 +27,10 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_USB1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) +#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 #define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 #define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 @@ -72,6 +75,10 @@ #define DCU_LAYER_MAX_NUM 16 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + #define CONFIG_SYS_FSL_SRDS_1 #ifdef CONFIG_LS102XA @@ -80,6 +87,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 7995fe262b..b0c267cfc2 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -95,8 +95,6 @@ struct ccsr_gur { u32 sdhcpcr; }; -#define SCFG_SCFGREVCR_REV 0xffffffff -#define SCFG_SCFGREVCR_NOREV 0 #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 @@ -182,7 +180,7 @@ struct ccsr_scfg { u32 etsecmcr; u32 sdhciovserlcr; u32 resv14[61]; - u32 sparecr; + u32 sparecr[8]; }; /* Clocking */ @@ -448,6 +446,7 @@ struct ccsr_ddr { #define CCI400_CTRLORD_TERM_BARRIER 0x00000008 #define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 /* CCI-400 registers */ struct ccsr_cci400 { diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h index ce4186fed0..8773ce30d1 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h @@ -83,9 +83,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2410_nand *s3c2410_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2410_nand *)S3C2410_NAND_BASE; + return (struct s3c24x0_nand *)S3C2410_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h index 3f44bdc306..7a525f2818 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -81,9 +81,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2440_nand *)S3C2440_NAND_BASE; + return (struct s3c24x0_nand *)S3C2440_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index ed9df34c69..2dae9fc3d7 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -135,34 +135,33 @@ struct s3c24x0_lcd { }; -#ifdef CONFIG_S3C2410 -/* NAND FLASH (see S3C2410 manual chapter 6) */ -struct s3c2410_nand { - u32 nfconf; - u32 nfcmd; - u32 nfaddr; - u32 nfdata; - u32 nfstat; - u32 nfecc; -}; -#endif -#ifdef CONFIG_S3C2440 -/* NAND FLASH (see S3C2440 manual chapter 6) */ -struct s3c2440_nand { +/* NAND FLASH (see manual chapter 6) */ +struct s3c24x0_nand { u32 nfconf; +#ifndef CONFIG_S3C2410 u32 nfcont; +#endif u32 nfcmd; u32 nfaddr; u32 nfdata; +#ifndef CONFIG_S3C2410 u32 nfeccd0; u32 nfeccd1; u32 nfeccd; +#endif u32 nfstat; +#ifdef CONFIG_S3C2410 + u32 nfecc; +#else u32 nfstat0; u32 nfstat1; -}; + u32 nfmecc0; + u32 nfmecc1; + u32 nfsecc; + u32 nfsblk; + u32 nfeblk; #endif - +}; /* UART (see manual chapter 11) */ struct s3c24x0_uart { diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index b40c16b6e7..64acff3504 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -25,9 +25,11 @@ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +void clock_set_pll3(unsigned int hz); void clock_set_pll5(unsigned int hz); unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz); void clock_init_safe(void); void clock_init_uart(void); #endif diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 9dca800d78..eb889695d9 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -62,7 +62,7 @@ struct sunxi_ccm_reg { u32 gps_clk_cfg; /* 0xd0 */ u32 spi3_clk_cfg; /* 0xd4 */ u8 res5[0x28]; - u32 dram_clk_cfg; /* 0x100 */ + u32 dram_clk_gate; /* 0x100 */ u32 be0_clk_cfg; /* 0x104 */ u32 be1_clk_cfg; /* 0x108 */ u32 fe0_clk_cfg; /* 0x10c */ @@ -186,12 +186,20 @@ struct sunxi_ccm_reg { /* ahb clock gate bit offset (second register) */ #define AHB_GATE_OFFSET_GMAC 17 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 #define CCM_AHB_GATE_GPS (0x1 << 26) #define CCM_AHB_GATE_SDRAM (0x1 << 14) #define CCM_AHB_GATE_DLL (0x1 << 15) #define CCM_AHB_GATE_ACE (0x1 << 16) +#define CCM_PLL3_CTRL_M(n) (((n) & 0x7f) << 0) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 15) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) #define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) #define CCM_PLL5_CTRL_M_X(n) ((n) - 1) @@ -253,6 +261,34 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_RST (0x1 << 30) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +/* We leave bit 11 set to 0, so sclk1 == sclk2 */ +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +/* Enable / disable both ch1 sclk1 and sclk2 at the same time */ +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31 | 0x1 << 15) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +/* No separate ddc gate on sun4i, sun5i and sun7i */ +#define CCM_HDMI_CTRL_DDC_GATE 0 +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 @@ -266,4 +302,13 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK 0 #define CCM_USB_CTRL_PHY2_CLK 0 +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (3 << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL5P (2 << 24) +#define CCM_DE_CTRL_RST (1 << 30) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index e16a7647ed..359905452c 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -176,13 +176,18 @@ struct sunxi_ccm_reg { #define CCM_PLL1_CTRL_MAGIC (0x1 << 16) #define CCM_PLL1_CTRL_EN (0x1 << 31) +#define CCM_PLL3_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0) #define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4) #define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) #define CCM_PLL5_CTRL_UPD (0x1 << 20) #define CCM_PLL5_CTRL_EN (0x1 << 31) -#define PLL6_CFG_DEFAULT 0x90041811 +#define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */ #define CCM_PLL6_CTRL_N_SHIFT 8 #define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) @@ -193,17 +198,26 @@ struct sunxi_ccm_reg { #define AXI_GATE_OFFSET_DRAM 0 +/* ahb_gate0 offsets */ #define AHB_GATE_OFFSET_USB_OHCI1 30 #define AHB_GATE_OFFSET_USB_OHCI0 29 #define AHB_GATE_OFFSET_USB_EHCI1 27 #define AHB_GATE_OFFSET_USB_EHCI0 26 #define AHB_GATE_OFFSET_MCTL 14 +#define AHB_GATE_OFFSET_GMAC 17 #define AHB_GATE_OFFSET_MMC3 11 #define AHB_GATE_OFFSET_MMC2 10 #define AHB_GATE_OFFSET_MMC1 9 #define AHB_GATE_OFFSET_MMC0 8 #define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +/* ahb_gate1 offsets */ +#define AHB_GATE_OFFSET_DRC0 25 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 + #define CCM_MMC_CTRL_OSCM24 (0x0 << 24) #define CCM_MMC_CTRL_PLL6 (0x1 << 24) @@ -216,6 +230,12 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + #define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ #define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) @@ -223,8 +243,35 @@ struct sunxi_ccm_reg { #define CCM_DRAMCLK_CFG_UPD (0x1 << 16) #define CCM_DRAMCLK_CFG_RST (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_MIPI_PLL (4 << 24) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30) +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */ +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_GMAC 17 #define AHB_RESET_OFFSET_MCTL 14 #define AHB_RESET_OFFSET_MMC3 11 #define AHB_RESET_OFFSET_MMC2 10 @@ -232,10 +279,28 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_MMC0 8 #define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_DRC0 25 +#define AHB_RESET_OFFSET_DE_BE0 12 +#define AHB_RESET_OFFSET_HDMI 11 +#define AHB_RESET_OFFSET_LCD1 5 +#define AHB_RESET_OFFSET_LCD0 4 + /* apb2 reset */ #define APB2_RESET_UART_SHIFT (16) #define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) #define APB2_RESET_TWI_SHIFT (0) #define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (0xf << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL6_2X (2 << 24) +#define CCM_DE_CTRL_PLL8 (3 << 24) +#define CCM_DE_CTRL_PLL9 (4 << 24) +#define CCM_DE_CTRL_PLL10 (5 << 24) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index bdee89e87d..2c92b5ca56 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -99,9 +99,13 @@ #define SUNXI_SCR_BASE 0x01c2c400 +#ifndef CONFIG_MACH_SUN6I #define SUNXI_GPS_BASE 0x01c30000 #define SUNXI_MALI400_BASE 0x01c40000 #define SUNXI_GMAC_BASE 0x01c50000 +#else +#define SUNXI_GMAC_BASE 0x01c30000 +#endif #define SUNXI_DRAM_COM_BASE 0x01c62000 #define SUNXI_DRAM_CTL0_BASE 0x01c63000 diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h new file mode 100644 index 0000000000..ddb71c1bbd --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/display.h @@ -0,0 +1,187 @@ +/* + * Sunxi platform display controller register and constant defines + * + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DISPLAY_H +#define _SUNXI_DISPLAY_H + +struct sunxi_de_be_reg { + u8 res0[0x800]; /* 0x000 */ + u32 mode; /* 0x800 */ + u32 backcolor; /* 0x804 */ + u32 disp_size; /* 0x808 */ + u8 res1[0x4]; /* 0x80c */ + u32 layer0_size; /* 0x810 */ + u32 layer1_size; /* 0x814 */ + u32 layer2_size; /* 0x818 */ + u32 layer3_size; /* 0x81c */ + u32 layer0_pos; /* 0x820 */ + u32 layer1_pos; /* 0x824 */ + u32 layer2_pos; /* 0x828 */ + u32 layer3_pos; /* 0x82c */ + u8 res2[0x10]; /* 0x830 */ + u32 layer0_stride; /* 0x840 */ + u32 layer1_stride; /* 0x844 */ + u32 layer2_stride; /* 0x848 */ + u32 layer3_stride; /* 0x84c */ + u32 layer0_addr_low32b; /* 0x850 */ + u32 layer1_addr_low32b; /* 0x854 */ + u32 layer2_addr_low32b; /* 0x858 */ + u32 layer3_addr_low32b; /* 0x85c */ + u32 layer0_addr_high4b; /* 0x860 */ + u32 layer1_addr_high4b; /* 0x864 */ + u32 layer2_addr_high4b; /* 0x868 */ + u32 layer3_addr_high4b; /* 0x86c */ + u32 reg_ctrl; /* 0x870 */ + u8 res3[0xc]; /* 0x874 */ + u32 color_key_max; /* 0x880 */ + u32 color_key_min; /* 0x884 */ + u32 color_key_config; /* 0x888 */ + u8 res4[0x4]; /* 0x88c */ + u32 layer0_attr0_ctrl; /* 0x890 */ + u32 layer1_attr0_ctrl; /* 0x894 */ + u32 layer2_attr0_ctrl; /* 0x898 */ + u32 layer3_attr0_ctrl; /* 0x89c */ + u32 layer0_attr1_ctrl; /* 0x8a0 */ + u32 layer1_attr1_ctrl; /* 0x8a4 */ + u32 layer2_attr1_ctrl; /* 0x8a8 */ + u32 layer3_attr1_ctrl; /* 0x8ac */ +}; + +struct sunxi_lcdc_reg { + u32 ctrl; /* 0x00 */ + u32 int0; /* 0x04 */ + u32 int1; /* 0x08 */ + u8 res0[0x04]; /* 0x0c */ + u32 frame_ctrl; /* 0x10 */ + u8 res1[0x2c]; /* 0x14 */ + u32 tcon0_ctrl; /* 0x40 */ + u32 tcon0_dclk; /* 0x44 */ + u32 tcon0_basic_timing0; /* 0x48 */ + u32 tcon0_basic_timing1; /* 0x4c */ + u32 tcon0_basic_timing2; /* 0x50 */ + u32 tcon0_basic_timing3; /* 0x54 */ + u32 tcon0_hv_intf; /* 0x58 */ + u8 res2[0x04]; /* 0x5c */ + u32 tcon0_cpu_intf; /* 0x60 */ + u32 tcon0_cpu_wr_dat; /* 0x64 */ + u32 tcon0_cpu_rd_dat0; /* 0x68 */ + u32 tcon0_cpu_rd_dat1; /* 0x6c */ + u32 tcon0_ttl_timing0; /* 0x70 */ + u32 tcon0_ttl_timing1; /* 0x74 */ + u32 tcon0_ttl_timing2; /* 0x78 */ + u32 tcon0_ttl_timing3; /* 0x7c */ + u32 tcon0_ttl_timing4; /* 0x80 */ + u32 tcon0_lvds_intf; /* 0x84 */ + u32 tcon0_io_polarity; /* 0x88 */ + u32 tcon0_io_tristate; /* 0x8c */ + u32 tcon1_ctrl; /* 0x90 */ + u32 tcon1_timing_source; /* 0x94 */ + u32 tcon1_timing_scale; /* 0x98 */ + u32 tcon1_timing_out; /* 0x9c */ + u32 tcon1_timing_h; /* 0xa0 */ + u32 tcon1_timing_v; /* 0xa4 */ + u32 tcon1_timing_sync; /* 0xa8 */ + u8 res3[0x44]; /* 0xac */ + u32 tcon1_io_polarity; /* 0xf0 */ + u32 tcon1_io_tristate; /* 0xf4 */ +}; + +struct sunxi_hdmi_reg { + u32 version_id; /* 0x000 */ + u32 ctrl; /* 0x004 */ + u32 irq; /* 0x008 */ + u32 hpd; /* 0x00c */ + u32 video_ctrl; /* 0x010 */ + u32 video_size; /* 0x014 */ + u32 video_bp; /* 0x018 */ + u32 video_fp; /* 0x01c */ + u32 video_spw; /* 0x020 */ + u32 video_polarity; /* 0x024 */ + u8 res0[0x1d8]; /* 0x028 */ + u32 pad_ctrl0; /* 0x200 */ + u32 pad_ctrl1; /* 0x204 */ + u32 pll_ctrl; /* 0x208 */ + u32 pll_dbg0; /* 0x20c */ +}; + +/* + * DE-BE register constants. + */ +#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0) +#define SUNXI_DE_BE_HEIGHT(y) (((y) - 1) << 16) +#define SUNXI_DE_BE_MODE_ENABLE (1 << 0) +#define SUNXI_DE_BE_MODE_START (1 << 1) +#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8) +#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5) +#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0) +#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8) + +/* + * LCDC register constants. + */ +#define SUNXI_LCDC_X(x) (((x) - 1) << 16) +#define SUNXI_LCDC_Y(y) (((y) - 1) << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_MASK (1 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON0 (0 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON1 (1 << 0) +#define SUNXI_LCDC_CTRL_TCON_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON0_DCLK_ENABLE (0xf << 28) +#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4) +#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n) (((n) - 1) << 16) +#define SUNXI_LCDC_TCON1_TIMING_V_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n) (((n) * 2) << 16) + +/* + * HDMI register constants. + */ +#define SUNXI_HDMI_X(x) (((x) - 1) << 0) +#define SUNXI_HDMI_Y(y) (((y) - 1) << 16) +#define SUNXI_HDMI_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF (1 << 0) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF (1 << 1) +#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73 +#define SUNXI_HDMI_HPD_DETECT (1 << 0) +#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0) +#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1) +#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f +#define SUNXI_HDMI_PAD_CTRL0_RUN 0x7e8000ff +#else +#define SUNXI_HDMI_PAD_CTRL0_HDP 0xfe800000 +#define SUNXI_HDMI_PAD_CTRL0_RUN 0xfe800000 +#endif + +#ifdef CONFIG_MACH_SUN4I +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c820 +#elif defined CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL1 0x01ded030 +#else +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c830 +#endif +#define SUNXI_HDMI_PAD_CTRL1_HALVE (1 << 6) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PLL_CTRL 0xba48a308 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) (((n) - 1) << 4) +#else +#define SUNXI_HDMI_PLL_CTRL 0xfa4ef708 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) ((n) << 4) +#endif +#define SUNXI_HDMI_PLL_CTRL_DIV_MASK (0xf << 4) + +#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21) +#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21) + +int sunxi_simplefb_setup(void *blob); + +#endif /* _SUNXI_DISPLAY_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index c734cf015e..366c0dc45a 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -134,6 +134,7 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_OUTPUT 1 #define SUNXI_GPA0_EMAC 2 +#define SUN6I_GPA0_GMAC 2 #define SUN7I_GPA0_GMAC 5 #define SUNXI_GPB0_TWI0 2 diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-uniphier/gpio.h new file mode 100644 index 0000000000..1fc4e19a61 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/gpio.h @@ -0,0 +1,6 @@ +/* + * Dummy header file to enable CONFIG_OF_CONTROL. + * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. + * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable + * OF_CONTROL must have arch/gpio.h even if GPIO is not supported. + */ diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index c69d0646f5..438f128326 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -17,6 +17,14 @@ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif + +#if defined(CONFIG_U_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_U_QE */ + #ifdef CONFIG_AT91FAMILY /* "static data" needed by at91's clock.c */ unsigned long cpu_clk_rate_hz; diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index 68e59b596f..384ea26022 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -136,10 +136,11 @@ reset: /* Set up temporary stack */ li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + move fp, sp la t9, board_init_f jr t9 - nop + move ra, zero /* * void relocate_code (addr_sp, gd, addr_moni) @@ -155,6 +156,7 @@ reset: .ent relocate_code relocate_code: move sp, a0 # set new stack pointer + move fp, sp move s0, a1 # save gd in s0 move s2, a2 # save destination address in s2 @@ -260,8 +262,9 @@ in_ram: addi t1, 4 move a0, s0 # a0 <-- gd + move a1, s2 la t9, board_init_r jr t9 - move a1, s2 + move ra, zero .end relocate_code diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S index 92954e1c90..6ff714e8ed 100644 --- a/arch/mips/cpu/mips64/start.S +++ b/arch/mips/cpu/mips64/start.S @@ -130,10 +130,11 @@ reset: /* Set up temporary stack */ dli sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + move fp, sp dla t9, board_init_f jr t9 - nop + move ra, zero /* * void relocate_code (addr_sp, gd, addr_moni) @@ -149,6 +150,7 @@ reset: .ent relocate_code relocate_code: move sp, a0 # set new stack pointer + move fp, sp move s0, a1 # save gd in s0 move s2, a2 # save destination address in s2 @@ -254,8 +256,9 @@ in_ram: daddi t1, 8 move a0, s0 # a0 <-- gd + move a1, s2 dla t9, board_init_r jr t9 - move a1, s2 + move ra, zero .end relocate_code diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e483e86f6b..7f9b6536af 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -5,9 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-y += io.o obj-$(CONFIG_CMD_BOOTM) += bootm.o diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c deleted file mode 100644 index 3feb020712..0000000000 --- a/arch/mips/lib/board.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <serial.h> -#include <stdio_dev.h> -#include <version.h> -#include <net.h> -#include <environment.h> -#include <nand.h> -#include <onenand_uboot.h> -#include <spi.h> - -#ifdef CONFIG_BITBANGMII -#include <miiphy.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -ulong monitor_flash_len; - -static char *failed = "*** failed ***\n"; - -int __board_early_init_f(void) -{ - /* - * Nothing to do in this dummy implementation - */ - return 0; -} -int board_early_init_f(void) - __attribute__((weak, alias("__board_early_init_f"))); - -static int init_func_ram(void) -{ -#ifdef CONFIG_BOARD_TYPES - int board_type = gd->board_type; -#else - int board_type = 0; /* use dummy arg */ -#endif - puts("DRAM: "); - - gd->ram_size = initdram(board_type); - if (gd->ram_size > 0) { - print_size(gd->ram_size, "\n"); - return 0; - } - puts(failed); - return 1; -} - -static int display_banner(void) -{ - - printf("\n\n%s\n\n", version_string); - return 0; -} - -#ifndef CONFIG_SYS_NO_FLASH -static void display_flash_config(ulong size) -{ - puts("Flash: "); - print_size(size, "\n"); -} -#endif - -static int init_baudrate(void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - - -/* - * Breath some life into the board... - * - * The first part of initialization is running from Flash memory; - * its main purpose is to initialize the RAM so that we - * can relocate the monitor code to RAM. - */ - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependend #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t)(void); - -init_fnc_t *init_sequence[] = { - board_early_init_f, - timer_init, - env_init, /* initialize environment */ - init_baudrate, /* initialize baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, - display_banner, /* say that we are here */ - checkboard, - init_func_ram, - NULL, -}; - - -void board_init_f(ulong bootflag) -{ - gd_t gd_data, *id; - bd_t *bd; - init_fnc_t **init_fnc_ptr; - ulong addr, addr_sp, len; - ulong *s; - - /* Pointer is writable since we allocated a register for it. - */ - gd = &gd_data; - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("" : : : "memory"); - - memset((void *)gd, 0, sizeof(gd_t)); - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) - hang(); - } - - /* - * Now that we have DRAM mapped and working, we can - * relocate the code and continue running from DRAM. - */ - addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; - - /* We can reserve some RAM "on top" here. - */ - - /* round down to next 4 kB limit. - */ - addr &= ~(4096 - 1); - debug("Top of RAM usable for U-Boot at: %08lx\n", addr); - - /* Reserve memory for U-Boot code, data & bss - * round down to next 16 kB limit - */ - len = bss_end() - CONFIG_SYS_MONITOR_BASE; - addr -= len; - addr &= ~(16 * 1024 - 1); - - debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); - - /* Reserve memory for malloc() arena. - */ - addr_sp = addr - TOTAL_MALLOC_LEN; - debug("Reserving %dk for malloc() at: %08lx\n", - TOTAL_MALLOC_LEN >> 10, addr_sp); - - /* - * (permanently) allocate a Board Info struct - * and a permanent copy of the "global" data - */ - addr_sp -= sizeof(bd_t); - bd = (bd_t *)addr_sp; - gd->bd = bd; - debug("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof(bd_t), addr_sp); - - addr_sp -= sizeof(gd_t); - id = (gd_t *)addr_sp; - debug("Reserving %zu Bytes for Global Data at: %08lx\n", - sizeof(gd_t), addr_sp); - - /* Reserve memory for boot params. - */ - addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN; - bd->bi_boot_params = addr_sp; - debug("Reserving %dk for boot params() at: %08lx\n", - CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp); - - /* - * Finally, we set up a new (bigger) stack. - * - * Leave some safety gap for SP, force alignment on 16 byte boundary - * Clear initial stack frame - */ - addr_sp -= 16; - addr_sp &= ~0xF; - s = (ulong *)addr_sp; - *s-- = 0; - *s-- = 0; - addr_sp = (ulong)s; - debug("Stack Pointer at: %08lx\n", addr_sp); - - /* - * Save local variables to board info struct - */ - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */ - bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */ - - memcpy(id, (void *)gd, sizeof(gd_t)); - - relocate_code(addr_sp, id, addr); - - /* NOTREACHED - relocate_code() does not return */ -} - -/* - * This is the next part if the initialization sequence: we are now - * running from RAM and have a "normal" C environment, i. e. global - * data can be written, BSS has been cleared, the stack size in not - * that critical any more, etc. - */ - -void board_init_r(gd_t *id, ulong dest_addr) -{ -#ifndef CONFIG_SYS_NO_FLASH - ulong size; -#endif - bd_t *bd; - - gd = id; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - - debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - - gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; - - monitor_flash_len = image_copy_end() - dest_addr; - - serial_initialize(); - - bd = gd->bd; - - /* The Malloc area is immediately below the monitor copy in DRAM */ - mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off - - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - -#ifndef CONFIG_SYS_NO_FLASH - /* configure available FLASH banks */ - size = flash_init(); - display_flash_config(size); - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; - bd->bi_flashsize = size; - -#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE - bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */ -#else - bd->bi_flashoffset = 0; -#endif -#else - bd->bi_flashstart = 0; - bd->bi_flashsize = 0; - bd->bi_flashoffset = 0; -#endif - -#ifdef CONFIG_CMD_NAND - puts("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - - /* relocate environment function pointers etc. */ - env_relocate(); - -#if defined(CONFIG_PCI) - /* - * Do pci configuration - */ - pci_init(); -#endif - -/** leave this here (after malloc(), environment and PCI are working) **/ - /* Initialize stdio devices */ - stdio_init(); - - jumptable_init(); - - /* Initialize the console (after the relocation and devices init) */ - console_init_r(); -/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/ - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - -#ifdef CONFIG_CMD_SPI - puts("SPI: "); - spi_init(); /* go init the SPI */ - puts("ready\n"); -#endif - -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r(); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) - puts("Net: "); - eth_initialize(gd->bd); -#endif - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) - main_loop(); - - /* NOTREACHED - no way out of command loop except booting */ -} diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 71bb0d2a19..e0722d20d1 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -6,10 +6,7 @@ */ #include <common.h> -#include <command.h> #include <image.h> -#include <u-boot/zlib.h> -#include <asm/byteorder.h> #include <asm/addrspace.h> DECLARE_GLOBAL_DATA_PTR; @@ -52,6 +49,20 @@ void arch_lmb_reserve(struct lmb *lmb) lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); } +static int boot_setup_linux(bootm_headers_t *images) +{ + int ret; + ulong rd_len; + + rd_len = images->rd_end - images->rd_start; + ret = boot_ramdisk_high(&images->lmb, images->rd_start, + rd_len, &images->initrd_start, &images->initrd_end); + if (ret) + return ret; + + return 0; +} + static void linux_cmdline_init(void) { linux_argc = 1; @@ -224,6 +235,8 @@ static void boot_jump_linux(bootm_headers_t *images) int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { + int ret; + /* No need for those on MIPS */ if (flag & BOOTM_STATE_OS_BD_T) return -1; @@ -243,6 +256,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + ret = boot_setup_linux(images); + if (ret) + return ret; + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); diff --git a/arch/nios2/cpu/fdt.c b/arch/nios2/cpu/fdt.c index 4d88f169df..5024682088 100644 --- a/arch/nios2/cpu/fdt.c +++ b/arch/nios2/cpu/fdt.c @@ -18,11 +18,13 @@ DECLARE_GLOBAL_DATA_PTR; -void __ft_board_setup(void *blob, bd_t *bd) +int __ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + + return 0; } -void ft_board_setup(void *blob, bd_t *bd) \ +int ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); void ft_cpu_setup(void *blob, bd_t *bd) @@ -32,5 +34,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) * Note: aliases in the dts are required for this */ fdt_fixup_ethernet(blob); + + return 0; } #endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 3a04a89301..fe3eb06324 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -9,6 +9,7 @@ #include <linux/compiler.h> #include <asm/fsl_errata.h> #include <asm/processor.h> +#include <fsl_usb.h> #include "fsl_corenet_serdes.h" #ifdef CONFIG_SYS_FSL_ERRATUM_A004849 @@ -293,6 +294,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (has_erratum_a007075()) puts("Work-around for Erratum A007075 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A007798 + if (has_erratum_a007798()) + puts("Work-around for Erratum A007798 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c index bd905d1586..eef9c5a17f 100644 --- a/arch/powerpc/cpu/ppc4xx/fdt.c +++ b/arch/powerpc/cpu/ppc4xx/fdt.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; -void __ft_board_setup(void *blob, bd_t *bd) +int __ft_board_setup(void *blob, bd_t *bd) { int rc; int i; @@ -60,8 +60,11 @@ void __ft_board_setup(void *blob, bd_t *bd) printf("Unable to update property EBC mappings, err=%s\n", fdt_strerror(rc)); } + + return 0; } -void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); +int ft_board_setup(void *blob, bd_t *bd) + __attribute__((weak, alias("__ft_board_setup"))); /* * Fixup all PCIe nodes by setting the device_type property diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4c1774f503..7860b40884 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -678,6 +678,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A006379 #define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A007798 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h index 64da4bb3ba..b9e2fb00fa 100644 --- a/arch/powerpc/include/asm/fsl_errata.h +++ b/arch/powerpc/include/asm/fsl_errata.h @@ -26,59 +26,4 @@ static inline bool has_erratum_a006379(void) return false; } #endif - -#ifdef CONFIG_SYS_FSL_ERRATUM_A006261 -static inline bool has_erratum_a006261(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P2041: - case SVR_P2040: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); - case SVR_P3041: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || - IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); - case SVR_P5010: - case SVR_P5020: - case SVR_P5021: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T1040: - return IS_SVR_REV(svr, 1, 0); - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0); - case SVR_P5040: - return IS_SVR_REV(svr, 1, 0); - } - - return false; -} -#endif - -static inline bool has_erratum_a007075(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_B4860: - case SVR_B4420: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0); - case SVR_P4080: - return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); - } - return false; -} #endif diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index f60cb0a6de..8e0e190003 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -71,6 +71,22 @@ enum srds_prtcl { INTERLAKEN, QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, + SGMII_2500_FM1_DTSEC1, + SGMII_2500_FM1_DTSEC2, + SGMII_2500_FM1_DTSEC3, + SGMII_2500_FM1_DTSEC4, + SGMII_2500_FM1_DTSEC5, + SGMII_2500_FM1_DTSEC6, + SGMII_2500_FM1_DTSEC9, + SGMII_2500_FM1_DTSEC10, + SGMII_2500_FM2_DTSEC1, + SGMII_2500_FM2_DTSEC2, + SGMII_2500_FM2_DTSEC3, + SGMII_2500_FM2_DTSEC4, + SGMII_2500_FM2_DTSEC5, + SGMII_2500_FM2_DTSEC6, + SGMII_2500_FM2_DTSEC9, + SGMII_2500_FM2_DTSEC10, }; enum srds { |
