diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx/start.S')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/start.S | 123 |
1 files changed, 63 insertions, 60 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index ac17f9d3ca..bb0dc1a653 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -44,6 +44,15 @@ #undef MSR_KERNEL #define MSR_KERNEL ( MSR_ME ) /* Machine Check */ +#if defined(CONFIG_NAND_SPL) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)) +#define MINIMAL_SPL +#endif + +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#define NOR_BOOT +#endif + /* * Set up GOT: Global Offset Table * @@ -53,7 +62,7 @@ GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) @@ -282,51 +291,8 @@ l2_disabled: isync .endm -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) -/* - * TLB entry for debuggging in AS1 - * Create temporary TLB entry in AS0 to handle debug exception - * As on debug exception MSR is cleared i.e. Address space is changed - * to 0. A TLB entry (in AS0) is required to handle debug exception generated - * in AS1. - */ - -#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. - * and this window is outside of 4K boot window. - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_4M, \ - CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ - 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 - -#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#else -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * because "nexti" will resize TLB to 4K - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_256K, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I, \ - CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#endif -#endif - -/* - * Ne need to setup interrupt vector for NAND SPL - * because NAND SPL never compiles it. - */ -#if !defined(CONFIG_NAND_SPL) +/* Interrupt vectors do not fit in minimal SPL. */ +#if !defined(MINIMAL_SPL) /* Setup interrupt vectors */ lis r1,CONFIG_SYS_MONITOR_BASE@h mtspr IVPR,r1 @@ -534,10 +500,6 @@ nexti: mflr r1 /* R1 = our PC */ li r3, 0 mtspr MAS1, r3 1: cmpw r3, r14 -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) - cmpwi cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB - cror cr0*4+eq, cr0*4+eq, cr1*4+eq -#endif rlwinm r5, r3, 16, MAS0_ESEL_MSK addi r3, r3, 1 beq 2f /* skip the entry we're executing from */ @@ -553,6 +515,46 @@ nexti: mflr r1 /* R1 = our PC */ 2: cmpw r3, r4 blt 1b +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + */ + +#ifdef NOR_BOOT +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. + * and this window is outside of 4K boot window. + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#else +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * because "nexti" will resize TLB to 4K + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif +#endif + /* * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default * location is not where we want it. This typically happens on a 36-bit @@ -1036,7 +1038,7 @@ create_init_ram_area: lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l -#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#ifdef NOR_BOOT /* create a temp mapping in AS=1 to the 4M boot window */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_4M, \ @@ -1050,8 +1052,8 @@ create_init_ram_area: */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #else /* @@ -1060,8 +1062,8 @@ create_init_ram_area: */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #endif @@ -1111,7 +1113,8 @@ switch_as: bdnz 1b /* Jump out the last 4K page and continue to 'normal' start */ -#ifdef CONFIG_SYS_RAMBOOT +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) + /* We assume that we're already running at the address we're linked at */ b _start_cont #else /* Calculate absolute address in FLASH and jump there */ @@ -1157,7 +1160,7 @@ _start_cont: /* NOTREACHED - board_init_f() does not return */ -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL . = EXC_OFF_SYS_RESET .globl _start_of_vectors _start_of_vectors: @@ -1601,7 +1604,7 @@ in32: in32r: lwbrx r3,r0,r3 blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */ /*------------------------------------------------------------------------------*/ @@ -1798,7 +1801,7 @@ clear_bss: mr r4,r10 /* Destination Address */ bl board_init_r -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL /* * Copy exception vector code to low memory * @@ -1971,4 +1974,4 @@ setup_ivors: #include "fixed_ivor.S" blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */ |
