diff options
Diffstat (limited to 'arch/m68k/cpu/mcf5445x')
| -rw-r--r-- | arch/m68k/cpu/mcf5445x/config.mk | 10 | ||||
| -rw-r--r-- | arch/m68k/cpu/mcf5445x/cpu.c | 17 | ||||
| -rw-r--r-- | arch/m68k/cpu/mcf5445x/cpu_init.c | 316 | ||||
| -rw-r--r-- | arch/m68k/cpu/mcf5445x/speed.c | 89 | ||||
| -rw-r--r-- | arch/m68k/cpu/mcf5445x/start.S | 273 |
5 files changed, 655 insertions, 50 deletions
diff --git a/arch/m68k/cpu/mcf5445x/config.mk b/arch/m68k/cpu/mcf5445x/config.mk index 61a731eeff..0c48783e4c 100644 --- a/arch/m68k/cpu/mcf5445x/config.mk +++ b/arch/m68k/cpu/mcf5445x/config.mk @@ -4,6 +4,8 @@ # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# Copyright 2011-2012 Freescale Semiconductor, Inc. +# # See file CREDITS for list of people who contributed to this # project. # @@ -24,7 +26,15 @@ # PLATFORM_RELFLAGS += -ffixed-d7 -msep-data + +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg)) + +ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x))) +PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC +else PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC +endif ifneq (,$(findstring -linux-,$(shell $(CC) --version))) ifneq (,$(findstring GOT,$(shell $(LD) --help))) diff --git a/arch/m68k/cpu/mcf5445x/cpu.c b/arch/m68k/cpu/mcf5445x/cpu.c index adfc708c35..b612cdaea1 100644 --- a/arch/m68k/cpu/mcf5445x/cpu.c +++ b/arch/m68k/cpu/mcf5445x/cpu.c @@ -39,6 +39,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { rcm_t *rcm = (rcm_t *) (MMAP_RCM); udelay(1000); + out_8(&rcm->rcr, RCM_RCR_FRCRSTOUT); + udelay(10000); setbits_8(&rcm->rcr, RCM_RCR_SOFTRST); /* we don't return! */ @@ -74,6 +76,21 @@ int checkcpu(void) case 0x4f: id = 54450; break; + case 0x9F: + id = 54410; + break; + case 0xA0: + id = 54415; + break; + case 0xA1: + id = 54416; + break; + case 0xA2: + id = 54417; + break; + case 0xA3: + id = 54418; + break; } if (id) { diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c index 3f9209ff19..6e947d06f9 100644 --- a/arch/m68k/cpu/mcf5445x/cpu_init.c +++ b/arch/m68k/cpu/mcf5445x/cpu_init.c @@ -31,6 +31,7 @@ #include <asm/processor.h> #include <asm/rtc.h> #include <asm/io.h> +#include <linux/compiler.h> #if defined(CONFIG_CMD_NET) #include <config.h> @@ -38,37 +39,11 @@ #include <asm/fec.h> #endif -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f(void) +void init_fbcs(void) { - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); + fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; - /* FlexBus */ - out_8(&gpio->par_be, - GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | - GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); - out_8(&gpio->par_fbctl, - GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | - GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); - -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); @@ -106,6 +81,145 @@ void cpu_init_f(void) out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); #endif +} + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + +#ifdef CONFIG_MCF5441x + scm_t *scm = (scm_t *) MMAP_SCM; + pm_t *pm = (pm_t *) MMAP_PM; + + /* Disable Switch */ + *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0; + + /* Disable core watchdog */ + out_be16(&scm->cwcr, 0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE | + GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW | + GPIO_PAR_FBCTL_TA_TA); + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + + /* eDMA */ + out_8(&pm->pmcr0, 17); + + /* INTR0 - INTR2 */ + out_8(&pm->pmcr0, 18); + out_8(&pm->pmcr0, 19); + out_8(&pm->pmcr0, 20); + + /* I2C */ + out_8(&pm->pmcr0, 22); + out_8(&pm->pmcr1, 4); + out_8(&pm->pmcr1, 7); + + /* DTMR0 - DTMR3*/ + out_8(&pm->pmcr0, 28); + out_8(&pm->pmcr0, 29); + out_8(&pm->pmcr0, 30); + out_8(&pm->pmcr0, 31); + + /* PIT0 - PIT3 */ + out_8(&pm->pmcr0, 32); + out_8(&pm->pmcr0, 33); + out_8(&pm->pmcr0, 34); + out_8(&pm->pmcr0, 35); + + /* Edge Port */ + out_8(&pm->pmcr0, 36); + out_8(&pm->pmcr0, 37); + + /* USB OTG */ + out_8(&pm->pmcr0, 44); + /* USB Host */ + out_8(&pm->pmcr0, 45); + + /* ESDHC */ + out_8(&pm->pmcr0, 51); + + /* ENET0 - ENET1 */ + out_8(&pm->pmcr0, 53); + out_8(&pm->pmcr0, 54); + + /* NAND */ + out_8(&pm->pmcr0, 63); + +#ifdef CONFIG_SYS_I2C_0 + out_8(&gpio->par_cani2c, 0xF0); + /* I2C0 pull up */ + out_be16(&gpio->pcr_b, 0x003C); + /* I2C0 max speed */ + out_8(&gpio->srcr_cani2c, 0x03); +#endif +#ifdef CONFIG_SYS_I2C_2 + /* I2C2 */ + out_8(&gpio->par_ssi0h, 0xA0); + /* I2C2, UART7 */ + out_8(&gpio->par_ssi0h, 0xA8); + /* UART7 */ + out_8(&gpio->par_ssi0l, 0x2); + /* UART8, UART9 */ + out_8(&gpio->par_cani2c, 0xAA); + /* UART4, UART0 */ + out_8(&gpio->par_uart0, 0xAF); + /* UART5, UART1 */ + out_8(&gpio->par_uart1, 0xAF); + /* UART6, UART2 */ + out_8(&gpio->par_uart2, 0xAF); + /* I2C2 pull up */ + out_be16(&gpio->pcr_h, 0xF000); +#endif +#ifdef CONFIG_SYS_I2C_5 + /* I2C5 */ + out_8(&gpio->par_uart1, 0x0A); + /* I2C5 pull up */ + out_be16(&gpio->pcr_e, 0x0003); + out_be16(&gpio->pcr_f, 0xC000); +#endif + + /* Lowest slew rate for UART0,1,2 */ + out_8(&gpio->srcr_uart, 0x00); +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x + scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + + out_be32(&scm1->mpr, 0x77777777); + out_be32(&scm1->pacra, 0); + out_be32(&scm1->pacrb, 0); + out_be32(&scm1->pacrc, 0); + out_be32(&scm1->pacrd, 0); + out_be32(&scm1->pacre, 0); + out_be32(&scm1->pacrf, 0); + out_be32(&scm1->pacrg, 0); + + /* FlexBus */ + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | + GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); + +#ifdef CONFIG_FSL_I2C + out_be16(&gpio->par_feci2c, + GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); +#endif +#endif /* CONFIG_MCF5445x */ + + /* FlexBus Chipselect */ + init_fbcs(); /* * now the flash base address is no longer at 0 (Newer ColdFire family @@ -115,11 +229,6 @@ void cpu_init_f(void) if (CONFIG_SYS_CS0_BASE != 0) setvbr(CONFIG_SYS_CS0_BASE); -#ifdef CONFIG_FSL_I2C - out_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); -#endif - icache_enable(); } @@ -142,9 +251,95 @@ int cpu_init_r(void) void uart_port_conf(int port) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; +#endif /* Setup Ports: */ switch (port) { +#ifdef CONFIG_MCF5441x + case 0: + /* UART0 */ + out_8(&pm->pmcr0, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD); + break; + case 1: + /* UART1 */ + out_8(&pm->pmcr0, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD); + break; + case 2: + /* UART2 */ + out_8(&pm->pmcr0, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD); + break; + case 3: + /* UART3 */ + out_8(&pm->pmcr0, 27); + clrbits_8(&gpio->par_dspi0, + ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK)); + setbits_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD); + break; + case 4: + /* UART4 */ + out_8(&pm->pmcr1, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD); + break; + case 5: + /* UART5 */ + out_8(&pm->pmcr1, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD); + break; + case 6: + /* UART6 */ + out_8(&pm->pmcr1, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD); + break; + case 7: + /* UART7 */ + out_8(&pm->pmcr1, 27); + clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK); + clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK); + setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD); + setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD); + break; + case 8: + /* UART8 */ + out_8(&pm->pmcr0, 28); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD); + break; + case 9: + /* UART9 */ + out_8(&pm->pmcr1, 29); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD); + break; +#endif +#ifdef CONFIG_MCF5445x case 0: clrbits_8(&gpio->par_uart, GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); @@ -177,6 +372,7 @@ void uart_port_conf(int port) GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); #endif break; +#endif /* CONFIG_MCF5445x */ } } @@ -186,6 +382,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) gpio_t *gpio = (gpio_t *) MMAP_GPIO; struct fec_info_s *info = (struct fec_info_s *)dev->priv; +#ifdef CONFIG_MCF5445x if (setclear) { #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY if (info->iobase == CONFIG_SYS_FEC0_IOBASE) @@ -223,6 +420,21 @@ int fecpin_setclear(struct eth_device *dev, int setclear) #endif } } +#endif /* CONFIG_MCF5445x */ + +#ifdef CONFIG_MCF5441x + if (setclear) { + out_8(&gpio->par_fec, 0x03); + out_8(&gpio->srcr_fec, 0x0F); + clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK, + GPIO_PAR_SIMP0H_DAT_GPIO); + clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK, + GPIO_PDDR_G4_OUTPUT); + clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK); + + } else + clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK); +#endif return 0; } #endif @@ -232,10 +444,24 @@ void cfspi_port_conf(void) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5445x out_8(&gpio->par_dspi, GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | GPIO_PAR_DSPI_SCK_SCK); +#endif + +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; + + out_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT | + GPIO_PAR_DSPI0_SCK_DSPI0SCK); + out_8(&gpio->srcr_dspiow, 3); + + /* DSPI0 */ + out_8(&pm->pmcr0, 23); +#endif } int cfspi_claim_bus(uint bus, uint cs) @@ -249,6 +475,7 @@ int cfspi_claim_bus(uint bus, uint cs) /* Clear FIFO and resume transfer */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -271,6 +498,20 @@ int cfspi_claim_bus(uint bus, uint cs) setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + switch (cs) { + case 0: + clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK); + setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0); + break; + case 1: + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + break; + } +#endif return 0; } @@ -283,6 +524,7 @@ void cfspi_release_bus(uint bus, uint cs) /* Clear FIFO */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -300,5 +542,11 @@ void cfspi_release_bus(uint bus, uint cs) clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + if (cs == 1) + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); +#endif } #endif diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c index 073b7efafb..55d1c488a3 100644 --- a/arch/m68k/cpu/mcf5445x/speed.c +++ b/arch/m68k/cpu/mcf5445x/speed.c @@ -57,8 +57,10 @@ void clock_enter_limp(int lpdiv) /* Round divider down to nearest power of two */ for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; +#ifdef CONFIG_MCF5445x /* Apply the divider to the system clock */ clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); +#endif /* Enable Limp Mode */ setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); @@ -81,19 +83,76 @@ void clock_exit_limp(void) ; } -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) +#ifdef CONFIG_MCF5441x +void setup_5441x_clocks(void) { + ccm_t *ccm = (ccm_t *)MMAP_CCM; + pll_t *pll = (pll_t *)MMAP_PLL; + int temp, vco = 0, bootmod_ccr, pdr; + + bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14; + + switch (bootmod_ccr) { + case 0: + out_be32(&pll->pcr, 0x00000013); + out_be32(&pll->pdr, 0x00e70c61); + clock_exit_limp(); + break; + case 2: + break; + case 3: + break; + } + + /*Change frequency for Modelo SER1 USB host*/ +#ifdef CONFIG_LOW_MCFCLK + temp = in_be32(&pll->pcr); + temp &= ~0x3f; + temp |= 5; + out_be32(&pll->pcr, temp); + + temp = in_be32(&pll->pdr); + temp &= ~0x001f0000; + temp |= 0x00040000; + out_be32(&pll->pdr, temp); + __asm__("tpf"); +#endif + setbits_be16(&ccm->misccr2, 0x02); + + vco = ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) * + CONFIG_SYS_INPUT_CLKSRC; + gd->vco_clk = vco; + + gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ + + pdr = in_be32(&pll->pdr); + temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + gd->flb_clk = vco / temp; /* FlexBus clock */ + gd->flb_clk >>= 1; + if (in_be16(ccm->misccr2) & 2) /* fsys/4 */ + gd->flb_clk >>= 1; + + temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + +} +#endif + +#ifdef CONFIG_MCF5445x +void setup_5445x_clocks(void) +{ ccm_t *ccm = (ccm_t *)MMAP_CCM; pll_t *pll = (pll_t *)MMAP_PLL; int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; int pllmult_pci[] = { 12, 6, 16, 8 }; - int vco = 0, bPci, temp, fbtemp, pcrvalue; + int vco = 0, temp, fbtemp, pcrvalue; int *pPllmult = NULL; u16 fbpll_mask; +#ifdef CONFIG_PCI + int bPci; +#endif #ifdef CONFIG_M54455EVB u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3); @@ -105,14 +164,16 @@ int get_clocks(void) ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { pPllmult = &pllmult_pci[0]; fbpll_mask = 3; /* 11b */ +#ifdef CONFIG_PCI bPci = 1; +#endif } else { pPllmult = &pllmult_nopci[0]; fbpll_mask = 7; /* 111b */ #ifdef CONFIG_PCI gd->pci_clk = 0; -#endif bPci = 0; +#endif } #ifdef CONFIG_M54455EVB @@ -215,6 +276,22 @@ int get_clocks(void) #ifdef CONFIG_FSL_I2C gd->i2c1_clk = gd->bus_clk; #endif +} +#endif + +/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ +int get_clocks(void) +{ +#ifdef CONFIG_MCF5441x + setup_5441x_clocks(); +#endif +#ifdef CONFIG_MCF5445x + setup_5445x_clocks(); +#endif + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif return (0); } diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 99060141d8..5fc944d2f3 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -2,6 +2,9 @@ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de> * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com> * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -21,8 +24,10 @@ * MA 02111-1307 USA */ +#include <common.h> #include <asm-offsets.h> #include <config.h> +#include <timestamp.h> #include "version.h" #include <asm/cache.h> @@ -43,8 +48,9 @@ addl #60,%sp; /* space for 15 regs */ \ rte; -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) #endif @@ -55,10 +61,15 @@ * These vectors are to catch any un-intended traps. */ _vectors: -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) INITSP: .long 0 /* Initial SP */ +#ifdef CONFIG_CF_SBF INITPC: .long ASM_DRAMINIT /* Initial PC */ +#endif +#ifdef CONFIG_SYS_NAND_BOOT +INITPC: .long ASM_DRAMINIT_N /* Initial PC */ +#endif #else @@ -95,7 +106,7 @@ vector1D: .long _FAULT /* Autovector Level 5 */ vector1E: .long _FAULT /* Autovector Level 6 */ vector1F: .long _FAULT /* Autovector Level 7 */ -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) /* TRAP #0 - #15 */ vector20_2F: @@ -138,16 +149,26 @@ vector192_255: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT #endif -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ asm_sbf_img_hdr: .long 0x00000000 /* checksum, not yet implemented */ - .long 0x00030000 /* image length */ + .long 0x00040000 /* image length */ .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ asm_dram_init: move.w #0x2700,%sr /* Mask off Interrupt */ +#ifdef CONFIG_SYS_NAND_BOOT + /* for assembly stack */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- +#endif + +#ifdef CONFIG_CF_SBF move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 movec %d0, %VBR @@ -180,7 +201,90 @@ asm_dram_init: move.l #(CONFIG_SYS_CS0_CTRL), (%a1) move.l #0xFC008004, %a1 move.l #(CONFIG_SYS_CS0_MASK), (%a1) +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_MCF5441x + /* TC: enable all peripherals, + in the future only enable certain peripherals */ + move.l #0xFC04002D, %a1 +#if defined(CONFIG_CF_SBF) + move.b #23, (%a1) /* dspi */ +#endif + move.b #46, (%a1) /* DDR */ + + /* slew settings */ + move.l #0xEC094060, %a1 + move.b #0, (%a1) + + /* use vco instead of cpu*2 clock for ddr clock */ + move.l #0xEC09001A, %a1 + move.w #0xE01D, (%a1) + + /* DDR settings */ + move.l #0xFC0B8180, %a1 + move.l #0x00000000, (%a1) + move.l #0x40000000, (%a1) + + move.l #0xFC0B81AC, %a1 + move.l #0x01030203, (%a1) + + move.l #0xFC0B8000, %a1 + move.l #0x01010101, (%a1)+ /* 0x00 */ + move.l #0x00000101, (%a1)+ /* 0x04 */ + move.l #0x01010100, (%a1)+ /* 0x08 */ + move.l #0x01010000, (%a1)+ /* 0x0C */ + move.l #0x00010101, (%a1)+ /* 0x10 */ + move.l #0xFC0B8018, %a1 + move.l #0x00010100, (%a1)+ /* 0x18 */ + move.l #0x00000001, (%a1)+ /* 0x1C */ + move.l #0x01000001, (%a1)+ /* 0x20 */ + move.l #0x00000100, (%a1)+ /* 0x24 */ + move.l #0x00010001, (%a1)+ /* 0x28 */ + move.l #0x00000200, (%a1)+ /* 0x2C */ + move.l #0x01000002, (%a1)+ /* 0x30 */ + move.l #0x00000000, (%a1)+ /* 0x34 */ + move.l #0x00000100, (%a1)+ /* 0x38 */ + move.l #0x02000100, (%a1)+ /* 0x3C */ + move.l #0x02000407, (%a1)+ /* 0x40 */ + move.l #0x02030007, (%a1)+ /* 0x44 */ + move.l #0x02000100, (%a1)+ /* 0x48 */ + move.l #0x0A030203, (%a1)+ /* 0x4C */ + move.l #0x00020708, (%a1)+ /* 0x50 */ + move.l #0x00050008, (%a1)+ /* 0x54 */ + move.l #0x04030002, (%a1)+ /* 0x58 */ + move.l #0x00000004, (%a1)+ /* 0x5C */ + move.l #0x020A0000, (%a1)+ /* 0x60 */ + move.l #0x0C00000E, (%a1)+ /* 0x64 */ + move.l #0x00002004, (%a1)+ /* 0x68 */ + move.l #0x00000000, (%a1)+ /* 0x6C */ + move.l #0x00100010, (%a1)+ /* 0x70 */ + move.l #0x00100010, (%a1)+ /* 0x74 */ + move.l #0x00000000, (%a1)+ /* 0x78 */ + move.l #0x07990000, (%a1)+ /* 0x7C */ + move.l #0xFC0B80A0, %a1 + move.l #0x00000000, (%a1)+ /* 0xA0 */ + move.l #0x00C80064, (%a1)+ /* 0xA4 */ + move.l #0x44520002, (%a1)+ /* 0xA8 */ + move.l #0x00C80023, (%a1)+ /* 0xAC */ + move.l #0xFC0B80B4, %a1 + move.l #0x0000C350, (%a1) /* 0xB4 */ + move.l #0xFC0B80E0, %a1 + move.l #0x04000000, (%a1)+ /* 0xE0 */ + move.l #0x03000304, (%a1)+ /* 0xE4 */ + move.l #0x40040000, (%a1)+ /* 0xE8 */ + move.l #0xC0004004, (%a1)+ /* 0xEC */ + move.l #0x0642C000, (%a1)+ /* 0xF0 */ + move.l #0x00000642, (%a1)+ /* 0xF4 */ + move.l #0xFC0B8024, %a1 + tpf + move.l #0x01000100, (%a1) /* 0x24 */ + + move.l #0x2000, %d1 + jsr asm_delay +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x /* Dram Initialization a1, a2, and d0 */ /* mscr sdram */ move.l #0xFC0A4074, %a1 @@ -203,7 +307,9 @@ dramsz_loop: add.l #1, %d1 cmp.l #1, %d2 bne dramsz_loop - +#ifdef CONFIG_SYS_NAND_BOOT + beq asm_nand_chk_status +#endif /* SDRAM Chip 0 and 1 */ move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) or.l %d1, (%a1) @@ -275,7 +381,9 @@ dramsz_loop: move.l #2000, %d1 jsr asm_delay +#endif /* CONFIG_MCF5445x */ +#ifdef CONFIG_CF_SBF /* * DSPI Initialization * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h @@ -286,15 +394,28 @@ dramsz_loop: */ /* Enable pins for DSPI mode - chip-selects are enabled later */ asm_dspi_init: +#ifdef CONFIG_MCF5441x + move.l #0xEC09404E, %a1 + move.l #0xEC09404F, %a2 + move.b #0xFF, (%a1) + move.b #0x80, (%a2) +#endif + +#ifdef CONFIG_MCF5445x move.l #0xFC0A4063, %a0 move.b #0x7F, (%a0) - +#endif /* Configure DSPI module */ move.l #0xFC05C000, %a0 move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ move.l #0xFC05C00C, %a0 +#ifdef CONFIG_MCF5441x + move.l #0x3E000016, (%a0) +#endif +#ifdef CONFIG_MCF5445x move.l #0x3E000011, (%a0) +#endif move.l #0xFC05C034, %a2 /* dtfr */ move.l #0xFC05C03B, %a3 /* drfr */ @@ -379,19 +500,148 @@ asm_dspi_rd_status: move.b (%a3), %d1 rts +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_SYS_NAND_BOOT + /* copy 4 boot pages to dram as soon as possible */ + /* each page is 996 bytes (1056 total with 60 ECC bytes */ + move.l #0x00000000, %a1 /* src */ + move.l #TEXT_BASE, %a2 /* dst */ + move.l #0x3E0, %d0 /* sz in long */ + +asm_boot_nand_copy: + move.l (%a1)+, (%a2)+ + subq.l #1, %d0 + bne asm_boot_nand_copy + + /* jump to memory and execute */ + move.l #(asm_nand_init), %a0 + jmp (%a0) + +asm_nand_init: + /* exit nand boot-mode */ + move.l #0xFC0FFF30, %a1 + or.l #0x00000040, %d1 + move.l %d1, (%a1) + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) + + /* NAND port configuration */ + move.l #0xEC094048, %a1 + move.b #0xFD, (%a1)+ + move.b #0x5F, (%a1)+ + move.b #0x04, (%a1)+ + + /* reset nand */ + move.l #0xFC0FFF38, %a1 /* isr */ + move.l #0x000e0000, (%a1) + move.l #0xFC0FFF08, %a2 + move.l #0x00000000, (%a2)+ /* car */ + move.l #0x11000000, (%a2)+ /* rar */ + move.l #0x00000000, (%a2)+ /* rpt */ + move.l #0x00000000, (%a2)+ /* rai */ + move.l #0xFC0FFF2c, %a2 /* cfg */ + move.l #0x00000000, (%a2)+ /* secsz */ + move.l #0x000e0681, (%a2)+ + move.l #0xFC0FFF04, %a2 /* cmd2 */ + move.l #0xFF404001, (%a2) + move.l #0x000e0000, (%a1) + + move.l #0x2000, %d1 + jsr asm_delay + + /* setup nand */ + move.l #0xFC0FFF00, %a1 + move.l #0x30700000, (%a1)+ /* cmd1 */ + move.l #0x007EF000, (%a1)+ /* cmd2 */ + + move.l #0xFC0FFF2C, %a1 + move.l #0x00000841, (%a1)+ /* secsz */ + move.l #0x000e0681, (%a1)+ /* cfg */ + + move.l #100, %d4 /* 100 pages ~200KB */ + move.l #4, %d2 /* start at 4 */ + move.l #0xFC0FFF04, %a0 /* cmd2 */ + move.l #0xFC0FFF0C, %a1 /* rar */ + move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + +asm_nand_read: + move.l #0x11000000, %d0 /* rar */ + or.l %d2, %d0 + move.l %d0, (%a1) + add.l #1, %d2 + + move.l (%a0), %d0 /* cmd2 */ + or.l #1, %d0 + move.l %d0, (%a0) + + move.l #0x200, %d1 + jsr asm_delay + +asm_nand_chk_status: + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + and.l #0x40000000, %d0 + tst.l %d0 + beq asm_nand_chk_status + + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + or.l #0x000E0000, %d0 + move.l %d0, (%a4) + + move.l #0x200, %d3 + move.l #0xFC0FC000, %a3 /* buf 1 */ +asm_nand_copy: + move.l (%a3)+, (%a2)+ + subq.l #1, %d3 + bgt asm_nand_copy + + subq.l #1, %d4 + bgt asm_nand_read + + /* jump to memory and execute */ + move.l #(TEXT_BASE + 0x400), %a0 + jmp (%a0) + +#endif /* CONFIG_SYS_NAND_BOOT */ asm_delay: nop subq.l #1, %d1 bne asm_delay rts -#endif /* CONFIG_CF_SBF */ +#endif /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */ .text . = 0x400 .globl _start _start: -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) nop nop move.w #0x2700,%sr /* Mask off Interrupt */ @@ -418,12 +668,15 @@ _start: movec %d0, %ACR1 movec %d0, %ACR2 movec %d0, %ACR3 +#else + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 +#endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- -#endif move.l #__got_start, %a5 /* put relocation table address to a5 */ |
