diff options
Diffstat (limited to 'arch/i386/cpu/sc520/sc520.c')
| -rw-r--r-- | arch/i386/cpu/sc520/sc520.c | 54 |
1 files changed, 28 insertions, 26 deletions
diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c index 519bfd8b0c..7acd471d96 100644 --- a/arch/i386/cpu/sc520/sc520.c +++ b/arch/i386/cpu/sc520/sc520.c @@ -41,7 +41,8 @@ volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; void init_sc520(void) { - /* Set the UARTxCTL register at it's slower, + /* + * Set the UARTxCTL register at it's slower, * baud clock giving us a 1.8432 MHz reference */ writeb(0x07, &sc520_mmcr->uart1ctl); @@ -50,25 +51,30 @@ void init_sc520(void) /* first set the timer pin mapping */ writeb(0x72, &sc520_mmcr->clksel); /* no clock frequency selected, use 1.1892MHz */ - /* enable PCI bus arbitrer */ - writeb(0x02, &sc520_mmcr->sysarbctl); /* enable concurrent mode */ + /* enable PCI bus arbiter (concurrent mode) */ + writeb(0x02, &sc520_mmcr->sysarbctl); - writeb(0x1f, &sc520_mmcr->sysarbmenb); /* enable external grants */ - writeb(0x04, &sc520_mmcr->hbctl); /* enable posted-writes */ + /* enable external grants */ + writeb(0x1f, &sc520_mmcr->sysarbmenb); + + /* enable posted-writes */ + writeb(0x04, &sc520_mmcr->hbctl); if (CONFIG_SYS_SC520_HIGH_SPEED) { - writeb(0x02, &sc520_mmcr->cpuctl); /* set it to 133 MHz and write back */ + /* set it to 133 MHz and write back */ + writeb(0x02, &sc520_mmcr->cpuctl); gd->cpu_clk = 133000000; printf("## CPU Speed set to 133MHz\n"); } else { - writeb(0x01, &sc520_mmcr->cpuctl); /* set it to 100 MHz and write back */ + /* set it to 100 MHz and write back */ + writeb(0x01, &sc520_mmcr->cpuctl); printf("## CPU Speed set to 100MHz\n"); gd->cpu_clk = 100000000; } /* wait at least one millisecond */ - asm("movl $0x2000,%%ecx\n" + asm("movl $0x2000, %%ecx\n" "0: pushl %%ecx\n" "popl %%ecx\n" "loop 0b\n": : : "ecx"); @@ -107,15 +113,15 @@ unsigned long init_sc520_dram(void) /* set SDRAM speed here */ - refresh_rate/=78; - if (refresh_rate<=1) { - val = 0; /* 7.8us */ - } else if (refresh_rate==2) { - val = 1; /* 15.6us */ - } else if (refresh_rate==3 || refresh_rate==4) { - val = 2; /* 31.2us */ + refresh_rate /= 78; + if (refresh_rate <= 1) { + val = 0; /* 7.8us */ + } else if (refresh_rate == 2) { + val = 1; /* 15.6us */ + } else if (refresh_rate == 3 || refresh_rate == 4) { + val = 2; /* 31.2us */ } else { - val = 3; /* 62.4us */ + val = 3; /* 62.4us */ } tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4); @@ -124,9 +130,9 @@ unsigned long init_sc520_dram(void) val = readb(&sc520_mmcr->drctmctl) & 0xf0; if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ + val |= 0x04; /* 3T */ } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ + val |= 0x08; /* 4T */ } else if (cas_precharge_delay>4) { val |= 0x0c; } @@ -139,8 +145,10 @@ unsigned long init_sc520_dram(void) writeb(val, &c520_mmcr->drctmctl); #endif - /* We read-back the configuration of the dram - * controller that the assembly code wrote */ + /* + * We read-back the configuration of the dram + * controller that the assembly code wrote + */ dram_ctrl = readl(&sc520_mmcr->drcbendadr); bd->bi_dram[0].start = 0; @@ -148,7 +156,6 @@ unsigned long init_sc520_dram(void) /* bank 0 enabled */ dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; bd->bi_dram[0].size = bd->bi_dram[1].start; - } else { bd->bi_dram[0].size = 0; bd->bi_dram[1].start = bd->bi_dram[0].start; @@ -179,11 +186,6 @@ unsigned long init_sc520_dram(void) } else { bd->bi_dram[3].size = 0; } - - -#if 0 - printf("Configured %d bytes of dram\n", dram_present); -#endif gd->ram_size = dram_present; return dram_present; |
