diff options
Diffstat (limited to 'arch/arm')
46 files changed, 35 insertions, 3744 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 820ba1ccab..7a2f91c48e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -73,10 +73,6 @@ config TARGET_INTEGRATORCP_CM920T bool "Support integratorcp_cm920t" select CPU_ARM920T -config TARGET_A320EVB - bool "Support a320evb" - select CPU_ARM920T - config ARCH_AT91 bool "Atmel AT91" @@ -88,14 +84,6 @@ config TARGET_SCB9328 bool "Support scb9328" select CPU_ARM920T -config TARGET_CM4008 - bool "Support cm4008" - select CPU_ARM920T - -config TARGET_CM41XX - bool "Support cm41xx" - select CPU_ARM920T - config TARGET_VCMA9 bool "Support VCMA9" select CPU_ARM920T @@ -144,10 +132,6 @@ config TARGET_DEVKIT3250 bool "Support devkit3250" select CPU_ARM926EJS -config TARGET_JADECPU - bool "Support jadecpu" - select CPU_ARM926EJS - config TARGET_MX25PDK bool "Support mx25pdk" select CPU_ARM926EJS @@ -227,10 +211,6 @@ config ORION5X bool "Marvell Orion" select CPU_ARM926EJS -config TARGET_DKB - bool "Support dkb" - select CPU_ARM926EJS - config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS @@ -314,10 +294,6 @@ config TARGET_RPI_2 bool "Support rpi_2" select CPU_V7 -config TARGET_TNETV107X_EVM - bool "Support tnetv107x_evm" - select CPU_ARM1176 - config TARGET_INTEGRATORAP_CM946ES bool "Support integratorap_cm946es" select CPU_ARM946ES @@ -620,9 +596,8 @@ config TEGRA bool "NVIDIA Tegra" select SUPPORT_SPL select SPL - select OF_CONTROL if !SPL_BUILD - select CPU_ARM720T if SPL_BUILD - select CPU_V7 if !SPL_BUILD + select OF_CONTROL + select CPU_V7 config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -714,7 +689,7 @@ config ARCH_UNIPHIER select CPU_V7 select SUPPORT_SPL select SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL endchoice @@ -762,7 +737,6 @@ source "board/BuR/tseries/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/db-mv784mp-gp/Kconfig" -source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/altera/socfpga/Kconfig" source "board/armadeus/apf27/Kconfig" @@ -779,8 +753,6 @@ source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/cirrus/edb93xx/Kconfig" -source "board/cm4008/Kconfig" -source "board/cm41xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" @@ -790,7 +762,6 @@ source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/esg/ima3-mx53/Kconfig" -source "board/faraday/a320evb/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" @@ -853,14 +824,12 @@ source "board/st-ericsson/snowball/Kconfig" source "board/st-ericsson/u8500/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" -source "board/syteco/jadecpu/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tbs/tbs2910/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" -source "board/ti/tnetv107xevm/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/tqc/tqma6/Kconfig" diff --git a/arch/arm/cpu/arm1176/Makefile b/arch/arm/cpu/arm1176/Makefile index ead2303373..480e130489 100644 --- a/arch/arm/cpu/arm1176/Makefile +++ b/arch/arm/cpu/arm1176/Makefile @@ -12,4 +12,3 @@ extra-y = start.o obj-y = cpu.o obj-$(CONFIG_BCM2835) += bcm2835/ -obj-$(CONFIG_TNETV107X) += tnetv107x/ diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig index 162f973f6c..73cc72b411 100644 --- a/arch/arm/cpu/arm1176/bcm2835/Kconfig +++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig @@ -1,12 +1,12 @@ if TARGET_RPI || TARGET_RPI_2 config DM - default y if !SPL_BUILD + default y config DM_SERIAL - default y if !SPL_BUILD + default y config DM_GPIO - default y if !SPL_BUILD + default y endif diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 0704bdde27..ac937bf5b0 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -96,28 +96,6 @@ mmu_disable: mov pc, r2 mmu_disable_phys: -#ifdef CONFIG_DISABLE_TCM - /* - * Disable the TCMs - */ - mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ - cmp r0, #0 - beq skip_tcmdisable - mov r1, #0 - mov r2, #1 - tst r0, r2 - mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ - tst r0, r2, LSL #16 - mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ -skip_tcmdisable: -#endif -#endif - -#ifdef CONFIG_PERIPORT_REMAP - /* Peri port setup */ - ldr r0, =CONFIG_PERIPORT_BASE - orr r0, r0, #CONFIG_PERIPORT_SIZE - mcr p15,0,r0,c15,c2,4 #endif /* diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile deleted file mode 100644 index a4c1edfc71..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += aemif.o clock.o init.o mux.o timer.o -obj-y += lowlevel_init.o diff --git a/arch/arm/cpu/arm1176/tnetv107x/aemif.c b/arch/arm/cpu/arm1176/tnetv107x/aemif.c deleted file mode 100644 index a0f57289e9..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/aemif.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * TNETV107X: Asynchronous EMIF Configuration - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/mux.h> - -#define ASYNC_EMIF_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE -#define ASYNC_EMIF_CONFIG(cs) (ASYNC_EMIF_BASE+0x10+(cs)*4) -#define ASYNC_EMIF_ONENAND_CONTROL (ASYNC_EMIF_BASE+0x5c) -#define ASYNC_EMIF_NAND_CONTROL (ASYNC_EMIF_BASE+0x60) -#define ASYNC_EMIF_WAITCYCLE_CONFIG (ASYNC_EMIF_BASE+0x4) - -#define CONFIG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0) -#define CONFIG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0) -#define CONFIG_WR_SETUP(v) (((v) & 0x0f) << 26) -#define CONFIG_WR_STROBE(v) (((v) & 0x3f) << 20) -#define CONFIG_WR_HOLD(v) (((v) & 0x07) << 17) -#define CONFIG_RD_SETUP(v) (((v) & 0x0f) << 13) -#define CONFIG_RD_STROBE(v) (((v) & 0x3f) << 7) -#define CONFIG_RD_HOLD(v) (((v) & 0x07) << 4) -#define CONFIG_TURN_AROUND(v) (((v) & 0x03) << 2) -#define CONFIG_WIDTH(v) (((v) & 0x03) << 0) - -#define NUM_CS 4 - -#define set_config_field(reg, field, val) \ - do { \ - if (val != -1) { \ - reg &= ~CONFIG_##field(0xffffffff); \ - reg |= CONFIG_##field(val); \ - } \ - } while (0) - -void configure_async_emif(int cs, struct async_emif_config *cfg) -{ - unsigned long tmp; - - if (cfg->mode == ASYNC_EMIF_MODE_NAND) { - tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL); - tmp |= (1 << cs); - __raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL); - - } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) { - tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL); - tmp |= (1 << cs); - __raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL); - } - - tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs)); - - set_config_field(tmp, SELECT_STROBE, cfg->select_strobe); - set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait); - set_config_field(tmp, WR_SETUP, cfg->wr_setup); - set_config_field(tmp, WR_STROBE, cfg->wr_strobe); - set_config_field(tmp, WR_HOLD, cfg->wr_hold); - set_config_field(tmp, RD_SETUP, cfg->rd_setup); - set_config_field(tmp, RD_STROBE, cfg->rd_strobe); - set_config_field(tmp, RD_HOLD, cfg->rd_hold); - set_config_field(tmp, TURN_AROUND, cfg->turn_around); - set_config_field(tmp, WIDTH, cfg->width); - - __raw_writel(tmp, ASYNC_EMIF_CONFIG(cs)); -} - -void init_async_emif(int num_cs, struct async_emif_config *config) -{ - int cs; - - clk_enable(TNETV107X_LPSC_AEMIF); - - for (cs = 0; cs < num_cs; cs++) - configure_async_emif(cs, config + cs); -} diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c deleted file mode 100644 index 7ba28d329f..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ /dev/null @@ -1,432 +0,0 @@ -/* - * TNETV107X: Clock management APIs - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm-generic/errno.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/arch/clock.h> - -#define CLOCK_BASE TNETV107X_CLOCK_CONTROL_BASE -#define PSC_BASE TNETV107X_PSC_BASE - -#define BIT(x) (1 << (x)) - -#define MAX_PREDIV 64 -#define MAX_POSTDIV 8UL -#define MAX_MULT 512 -#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV) - -/* LPSC registers */ -#define PSC_PTCMD 0x120 -#define PSC_PTSTAT 0x128 -#define PSC_MDSTAT(n) (0x800 + (n) * 4) -#define PSC_MDCTL(n) (0xA00 + (n) * 4) - -#define PSC_MDCTL_LRSTZ BIT(8) - -#define psc_reg_read(reg) __raw_readl((u32 *)(PSC_BASE + (reg))) -#define psc_reg_write(reg, val) __raw_writel(val, (u32 *)(PSC_BASE + (reg))) - -/* SSPLL registers */ -struct sspll_regs { - u32 modes; - u32 postdiv; - u32 prediv; - u32 mult_factor; - u32 divider_range; - u32 bw_divider; - u32 spr_amount; - u32 spr_rate_div; - u32 diag; -}; - -/* SSPLL base addresses */ -static struct sspll_regs *sspll_regs[] = { - (struct sspll_regs *)(CLOCK_BASE + 0x040), - (struct sspll_regs *)(CLOCK_BASE + 0x080), - (struct sspll_regs *)(CLOCK_BASE + 0x0c0), -}; - -#define sspll_reg(pll, reg) (&(sspll_regs[pll]->reg)) -#define sspll_reg_read(pll, reg) __raw_readl(sspll_reg(pll, reg)) -#define sspll_reg_write(pll, reg, val) __raw_writel(val, sspll_reg(pll, reg)) - - -/* PLL Control Registers */ -struct pllctl_regs { - u32 ctl; /* 00 */ - u32 ocsel; /* 04 */ - u32 secctl; /* 08 */ - u32 __pad0; - u32 mult; /* 10 */ - u32 prediv; /* 14 */ - u32 div1; /* 18 */ - u32 div2; /* 1c */ - u32 div3; /* 20 */ - u32 oscdiv1; /* 24 */ - u32 postdiv; /* 28 */ - u32 bpdiv; /* 2c */ - u32 wakeup; /* 30 */ - u32 __pad1; - u32 cmd; /* 38 */ - u32 stat; /* 3c */ - u32 alnctl; /* 40 */ - u32 dchange; /* 44 */ - u32 cken; /* 48 */ - u32 ckstat; /* 4c */ - u32 systat; /* 50 */ - u32 ckctl; /* 54 */ - u32 __pad2[2]; - u32 div4; /* 60 */ - u32 div5; /* 64 */ - u32 div6; /* 68 */ - u32 div7; /* 6c */ - u32 div8; /* 70 */ -}; - -struct lpsc_map { - int pll, div; -}; - -static struct pllctl_regs *pllctl_regs[] = { - (struct pllctl_regs *)(CLOCK_BASE + 0x700), - (struct pllctl_regs *)(CLOCK_BASE + 0x300), - (struct pllctl_regs *)(CLOCK_BASE + 0x500), -}; - -#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) -#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg)) -#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg)) - -#define pllctl_reg_rmw(pll, reg, mask, val) \ - pllctl_reg_write(pll, reg, \ - (pllctl_reg_read(pll, reg) & ~(mask)) | val) - -#define pllctl_reg_setbits(pll, reg, mask) \ - pllctl_reg_rmw(pll, reg, 0, mask) - -#define pllctl_reg_clrbits(pll, reg, mask) \ - pllctl_reg_rmw(pll, reg, mask, 0) - -/* PLLCTL Bits */ -#define PLLCTL_CLKMODE BIT(8) -#define PLLCTL_PLLSELB BIT(7) -#define PLLCTL_PLLENSRC BIT(5) -#define PLLCTL_PLLDIS BIT(4) -#define PLLCTL_PLLRST BIT(3) -#define PLLCTL_PLLPWRDN BIT(1) -#define PLLCTL_PLLEN BIT(0) - -#define PLLDIV_ENABLE BIT(15) - -static int pll_div_offset[] = { -#define div_offset(reg) offsetof(struct pllctl_regs, reg) - div_offset(div1), div_offset(div2), div_offset(div3), - div_offset(div4), div_offset(div5), div_offset(div6), - div_offset(div7), div_offset(div8), -}; - -static unsigned long pll_bypass_mask[] = { 1, 4, 2 }; -static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff }; - -/* Mappings from PLL+DIV to subsystem clocks */ -#define sys_arm1176_clk {SYS_PLL, 0} -#define sys_dsp_clk {SYS_PLL, 1} -#define sys_ddr_clk {SYS_PLL, 2} -#define sys_full_clk {SYS_PLL, 3} -#define sys_lcd_clk {SYS_PLL, 4} -#define sys_vlynq_ref_clk {SYS_PLL, 5} -#define sys_tsc_clk {SYS_PLL, 6} -#define sys_half_clk {SYS_PLL, 7} - -#define eth_clk_5 {ETH_PLL, 0} -#define eth_clk_50 {ETH_PLL, 1} -#define eth_clk_125 {ETH_PLL, 2} -#define eth_clk_250 {ETH_PLL, 3} -#define eth_clk_25 {ETH_PLL, 4} - -#define tdm_clk {TDM_PLL, 0} -#define tdm_extra_clk {TDM_PLL, 1} -#define tdm1_clk {TDM_PLL, 2} - -static const struct lpsc_map lpsc_clk_map[] = { - [TNETV107X_LPSC_ARM] = sys_arm1176_clk, - [TNETV107X_LPSC_GEM] = sys_dsp_clk, - [TNETV107X_LPSC_DDR2_PHY] = sys_ddr_clk, - [TNETV107X_LPSC_TPCC] = sys_full_clk, - [TNETV107X_LPSC_TPTC0] = sys_full_clk, - [TNETV107X_LPSC_TPTC1] = sys_full_clk, - [TNETV107X_LPSC_RAM] = sys_full_clk, - [TNETV107X_LPSC_MBX_LITE] = sys_arm1176_clk, - [TNETV107X_LPSC_LCD] = sys_lcd_clk, - [TNETV107X_LPSC_ETHSS] = eth_clk_125, - [TNETV107X_LPSC_AEMIF] = sys_full_clk, - [TNETV107X_LPSC_CHIP_CFG] = sys_half_clk, - [TNETV107X_LPSC_TSC] = sys_tsc_clk, - [TNETV107X_LPSC_ROM] = sys_half_clk, - [TNETV107X_LPSC_UART2] = sys_half_clk, - [TNETV107X_LPSC_PKTSEC] = sys_half_clk, - [TNETV107X_LPSC_SECCTL] = sys_half_clk, - [TNETV107X_LPSC_KEYMGR] = sys_half_clk, - [TNETV107X_LPSC_KEYPAD] = sys_half_clk, - [TNETV107X_LPSC_GPIO] = sys_half_clk, - [TNETV107X_LPSC_MDIO] = sys_half_clk, - [TNETV107X_LPSC_SDIO0] = sys_half_clk, - [TNETV107X_LPSC_UART0] = sys_half_clk, - [TNETV107X_LPSC_UART1] = sys_half_clk, - [TNETV107X_LPSC_TIMER0] = sys_half_clk, - [TNETV107X_LPSC_TIMER1] = sys_half_clk, - [TNETV107X_LPSC_WDT_ARM] = sys_half_clk, - [TNETV107X_LPSC_WDT_DSP] = sys_half_clk, - [TNETV107X_LPSC_SSP] = sys_half_clk, - [TNETV107X_LPSC_TDM0] = tdm_clk, - [TNETV107X_LPSC_VLYNQ] = sys_vlynq_ref_clk, - [TNETV107X_LPSC_MCDMA] = sys_half_clk, - [TNETV107X_LPSC_USB0] = sys_half_clk, - [TNETV107X_LPSC_TDM1] = tdm1_clk, - [TNETV107X_LPSC_DEBUGSS] = sys_half_clk, - [TNETV107X_LPSC_ETHSS_RGMII] = eth_clk_250, - [TNETV107X_LPSC_SYSTEM] = sys_half_clk, - [TNETV107X_LPSC_IMCOP] = sys_dsp_clk, - [TNETV107X_LPSC_SPARE] = sys_half_clk, - [TNETV107X_LPSC_SDIO1] = sys_half_clk, - [TNETV107X_LPSC_USB1] = sys_half_clk, - [TNETV107X_LPSC_USBSS] = sys_half_clk, - [TNETV107X_LPSC_DDR2_EMIF1_VRST] = sys_ddr_clk, - [TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST] = sys_ddr_clk, -}; - -static const unsigned long pll_ext_freq[] = { - [SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ, - [ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ, - [TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ, -}; - -static unsigned long pll_freq_get(int pll) -{ - unsigned long mult = 1, prediv = 1, postdiv = 1; - unsigned long ref = CONFIG_SYS_INT_OSC_FREQ; - unsigned long ret; - u32 bypass; - - bypass = __raw_readl((u32 *)(CLOCK_BASE)); - if (!(bypass & pll_bypass_mask[pll])) { - mult = sspll_reg_read(pll, mult_factor); - prediv = sspll_reg_read(pll, prediv) + 1; - postdiv = sspll_reg_read(pll, postdiv) + 1; - } - - if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE) - ref = pll_ext_freq[pll]; - - if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN)) - return ref; - - ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256); - ret /= (prediv * postdiv); - - return ret; -} - -static unsigned long __pll_div_freq_get(int pll, unsigned int fpll, - int div) -{ - int divider = 1; - unsigned long divreg; - - divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]); - - if (divreg & PLLDIV_ENABLE) - divider = (divreg & pll_div_mask[pll]) + 1; - - return fpll / divider; -} - -static unsigned long pll_div_freq_get(int pll, int div) -{ - unsigned int fpll = pll_freq_get(pll); - - return __pll_div_freq_get(pll, fpll, div); -} - -static void __pll_div_freq_set(int pll, unsigned int fpll, int div, - unsigned long hz) -{ - int divider = (fpll / hz - 1); - - divider &= pll_div_mask[pll]; - divider |= PLLDIV_ENABLE; - - __raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]); - pllctl_reg_setbits(pll, alnctl, (1 << div)); - pllctl_reg_setbits(pll, dchange, (1 << div)); -} - -static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz) -{ - unsigned int fpll = pll_freq_get(pll); - - __pll_div_freq_set(pll, fpll, div, hz); - - pllctl_reg_write(pll, cmd, 1); - - /* Wait until new divider takes effect */ - while (pllctl_reg_read(pll, stat) & 0x01); - - return __pll_div_freq_get(pll, fpll, div); -} - -unsigned long clk_get_rate(unsigned int clk) -{ - return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div); -} - -unsigned long clk_round_rate(unsigned int clk, unsigned long hz) -{ - unsigned long fpll, divider, pll; - - pll = lpsc_clk_map[clk].pll; - fpll = pll_freq_get(pll); - divider = (fpll / hz - 1); - divider &= pll_div_mask[pll]; - - return fpll / (divider + 1); -} - -int clk_set_rate(unsigned int clk, unsigned long _hz) -{ - unsigned long hz; - - hz = clk_round_rate(clk, _hz); - if (hz != _hz) - return -EINVAL; /* Cannot set to target freq */ - - pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz); - return 0; -} - -void lpsc_control(int mod, unsigned long state, int lrstz) -{ - u32 mdctl; - - mdctl = psc_reg_read(PSC_MDCTL(mod)); - mdctl &= ~0x1f; - mdctl |= state; - - if (lrstz == 0) - mdctl &= ~PSC_MDCTL_LRSTZ; - else if (lrstz == 1) - mdctl |= PSC_MDCTL_LRSTZ; - - psc_reg_write(PSC_MDCTL(mod), mdctl); - - psc_reg_write(PSC_PTCMD, 1); - - /* wait for power domain transition to end */ - while (psc_reg_read(PSC_PTSTAT) & 1); - - /* Wait for module state change */ - while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state); -} - -int lpsc_status(unsigned int id) -{ - return psc_reg_read(PSC_MDSTAT(id)) & 0x1f; -} - -static void init_pll(const struct pll_init_data *data) -{ - unsigned long fpll; - unsigned long best_pre = 0, best_post = 0, best_mult = 0; - unsigned long div, prediv, postdiv, mult; - unsigned long delta, actual; - long best_delta = -1; - int i; - u32 tmp; - - if (data->pll == SYS_PLL) - return; /* cannot reconfigure system pll on the fly */ - - tmp = pllctl_reg_read(data->pll, ctl); - if (data->internal_osc) { - tmp &= ~PLLCTL_CLKMODE; - fpll = CONFIG_SYS_INT_OSC_FREQ; - } else { - tmp |= PLLCTL_CLKMODE; - fpll = pll_ext_freq[data->pll]; - } - pllctl_reg_write(data->pll, ctl, tmp); - - mult = data->pll_freq / fpll; - for (mult = max(mult, 1UL); mult <= MAX_MULT; mult++) { - div = (fpll * mult) / data->pll_freq; - if (div < 1 || div > MAX_DIV) - continue; - - for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) { - prediv = div / postdiv; - if (prediv < 1 || prediv > MAX_PREDIV) - continue; - - actual = (fpll / prediv) * (mult / postdiv); - delta = (actual - data->pll_freq); - if (delta < 0) - delta = -delta; - if ((delta < best_delta) || (best_delta == -1)) { - best_delta = delta; - best_mult = mult; - best_pre = prediv; - best_post = postdiv; - if (delta == 0) - goto done; - } - } - } -done: - - if (best_delta == -1) { - printf("pll cannot derive %lu from %lu\n", - data->pll_freq, fpll); - return; - } - - fpll = fpll * best_mult; - fpll /= best_pre * best_post; - - pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC); - pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN); - - pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST); - - pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN); - pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS); - - sspll_reg_write(data->pll, mult_factor, (best_mult - 1) << 8); - sspll_reg_write(data->pll, prediv, best_pre - 1); - sspll_reg_write(data->pll, postdiv, best_post - 1); - - for (i = 0; i < 10; i++) - if (data->div_freq[i]) - __pll_div_freq_set(data->pll, fpll, i, - data->div_freq[i]); - - pllctl_reg_write(data->pll, cmd, 1); - - /* Wait until pll "go" operation completes */ - while (pllctl_reg_read(data->pll, stat) & 0x01); - - pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST); - pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); -} - -void init_plls(int num_pll, struct pll_init_data *config) -{ - int i; - - for (i = 0; i < num_pll; i++) - init_pll(&config[i]); -} diff --git a/arch/arm/cpu/arm1176/tnetv107x/init.c b/arch/arm/cpu/arm1176/tnetv107x/init.c deleted file mode 100644 index d8708267d7..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/init.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * TNETV107X: Architecture initialization - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> - -void chip_configuration_unlock(void) -{ - __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0); - __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1); -} - -int arch_cpu_init(void) -{ - icache_enable(); - chip_configuration_unlock(); - - return 0; -} diff --git a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S deleted file mode 100644 index a8bce4784c..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S +++ /dev/null @@ -1,10 +0,0 @@ -/* - * TNETV107X: Low-level pre-relocation initialization - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.globl lowlevel_init -lowlevel_init: - /* nothing for now, maybe needed for more exotic boot modes */ - mov pc, lr diff --git a/arch/arm/cpu/arm1176/tnetv107x/mux.c b/arch/arm/cpu/arm1176/tnetv107x/mux.c deleted file mode 100644 index 310d84dfb4..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/mux.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * TNETV107X: Pinmux configuration - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/mux.h> - -#define MUX_MODE_1 0x00 -#define MUX_MODE_2 0x04 -#define MUX_MODE_3 0x0c -#define MUX_MODE_4 0x1c - -#define MUX_DEBUG 0 - -static const struct pin_config pin_table[] = { - /* reg shift mode */ - TNETV107X_MUX_CFG(0, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(0, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(0, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(0, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(0, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(0, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(0, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(1, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(1, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(2, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(2, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(3, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(3, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 10, MUX_MODE_4), - TNETV107X_MUX_CFG(3, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(3, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 20, MUX_MODE_4), - TNETV107X_MUX_CFG(3, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(3, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(3, 25, MUX_MODE_4), - TNETV107X_MUX_CFG(4, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(4, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(4, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(4, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 20, MUX_MODE_3), - TNETV107X_MUX_CFG(4, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(4, 25, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 10, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 20, MUX_MODE_4), - TNETV107X_MUX_CFG(5, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(5, 25, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 10, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 20, MUX_MODE_4), - TNETV107X_MUX_CFG(6, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(6, 25, MUX_MODE_4), - TNETV107X_MUX_CFG(7, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(7, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(7, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 10, MUX_MODE_4), - TNETV107X_MUX_CFG(7, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(7, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(7, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(7, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(8, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(8, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(8, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(8, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(8, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(8, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(8, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(9, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 0, MUX_MODE_4), - TNETV107X_MUX_CFG(9, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(9, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 5, MUX_MODE_4), - TNETV107X_MUX_CFG(9, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(9, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 10, MUX_MODE_4), - TNETV107X_MUX_CFG(9, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(9, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(9, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(9, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(9, 20, MUX_MODE_4), - TNETV107X_MUX_CFG(10, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(10, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(10, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(10, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(10, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(10, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(10, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(11, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(11, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(12, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(13, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(13, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(13, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(13, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(14, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(15, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(15, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(15, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(16, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(16, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(16, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(16, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(16, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(16, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(16, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(17, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(17, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(17, 0, MUX_MODE_3), - TNETV107X_MUX_CFG(17, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(17, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(17, 5, MUX_MODE_3), - TNETV107X_MUX_CFG(17, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(17, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(17, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(17, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(17, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(17, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(18, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(18, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(18, 0, MUX_MODE_3), - TNETV107X_MUX_CFG(18, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(18, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(18, 5, MUX_MODE_3), - TNETV107X_MUX_CFG(18, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(18, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(18, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(18, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(18, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(18, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(19, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(19, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(19, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(19, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(19, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(19, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(20, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(20, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(21, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 5, MUX_MODE_3), - TNETV107X_MUX_CFG(22, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(22, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(22, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(22, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 20, MUX_MODE_3), - TNETV107X_MUX_CFG(22, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(22, 25, MUX_MODE_3), - TNETV107X_MUX_CFG(23, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(23, 0, MUX_MODE_3), - TNETV107X_MUX_CFG(23, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(23, 5, MUX_MODE_3), - TNETV107X_MUX_CFG(23, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(23, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(24, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(24, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(24, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(24, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(24, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(24, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(24, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(24, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(24, 25, MUX_MODE_2), - TNETV107X_MUX_CFG(25, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(25, 0, MUX_MODE_2), - TNETV107X_MUX_CFG(25, 0, MUX_MODE_3), - TNETV107X_MUX_CFG(25, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(25, 5, MUX_MODE_2), - TNETV107X_MUX_CFG(25, 5, MUX_MODE_3), - TNETV107X_MUX_CFG(25, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(25, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(25, 10, MUX_MODE_3), - TNETV107X_MUX_CFG(25, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(25, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(25, 15, MUX_MODE_3), - TNETV107X_MUX_CFG(25, 15, MUX_MODE_4), - TNETV107X_MUX_CFG(26, 0, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 5, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 10, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 10, MUX_MODE_2), - TNETV107X_MUX_CFG(26, 15, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 15, MUX_MODE_2), - TNETV107X_MUX_CFG(26, 20, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 20, MUX_MODE_2), - TNETV107X_MUX_CFG(26, 25, MUX_MODE_1), - TNETV107X_MUX_CFG(26, 25, MUX_MODE_2), -}; - -const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]); - -int mux_select_pin(short index) -{ - const struct pin_config *cfg; - unsigned long mask, mode, reg; - - if (index >= pin_table_size) - return 0; - - cfg = &pin_table[index]; - - mask = 0x1f << cfg->mask_offset; - mode = cfg->mode << cfg->mask_offset; - - reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index)); - reg = (reg & ~mask) | mode; - __raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index)); - - return 1; -} - -int mux_select_pins(const short *pins) -{ - int i, ret = 1; - - for (i = 0; pins[i] >= 0; i++) - ret &= mux_select_pin(pins[i]); - - return ret; -} diff --git a/arch/arm/cpu/arm1176/tnetv107x/timer.c b/arch/arm/cpu/arm1176/tnetv107x/timer.c deleted file mode 100644 index 6e0dd0d2bd..0000000000 --- a/arch/arm/cpu/arm1176/tnetv107x/timer.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * TNETV107X: Timer implementation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> - -struct timer_regs { - u_int32_t pid12; - u_int32_t pad[3]; - u_int32_t tim12; - u_int32_t tim34; - u_int32_t prd12; - u_int32_t prd34; - u_int32_t tcr; - u_int32_t tgcr; - u_int32_t wdtcr; -}; - -#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE) - -#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) -#define TIM_CLK_DIV 16 - -static ulong timestamp; -static ulong lastinc; - -int timer_init(void) -{ - clk_enable(TNETV107X_LPSC_TIMER0); - - lastinc = timestamp = 0; - - /* We are using timer34 in unchained 32-bit mode, full speed */ - __raw_writel(0x0, ®s->tcr); - __raw_writel(0x0, ®s->tgcr); - __raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), ®s->tgcr); - __raw_writel(0x0, ®s->tim34); - __raw_writel(TIMER_LOAD_VAL, ®s->prd34); - __raw_writel(2 << 22, ®s->tcr); - - return 0; -} - -static ulong get_timer_raw(void) -{ - ulong now = __raw_readl(®s->tim34); - - if (now >= lastinc) - timestamp += now - lastinc; - else - timestamp += now + TIMER_LOAD_VAL - lastinc; - - lastinc = now; - - return timestamp; -} - -ulong get_timer(ulong base) -{ - return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base; -} - -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -void __udelay(unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - tmo = CONFIG_SYS_HZ_CLOCK / 1000; - tmo *= usec; - tmo /= (1000 * TIM_CLK_DIV); - - endtime = get_timer_raw() + tmo; - - do { - ulong now = get_timer_raw(); - diff = endtime - now; - } while (diff >= 0); -} - -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index a16838b479..6582938db0 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -10,8 +10,6 @@ extra-y = start.o obj-y += cpu.o obj-$(CONFIG_USE_IRQ) += interrupts.o -obj-$(if $(filter a320,$(SOC)),y) += a320/ obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ -obj-$(CONFIG_KS8695) += ks8695/ obj-$(CONFIG_S3C24X0) += s3c24x0/ diff --git a/arch/arm/cpu/arm920t/a320/Makefile b/arch/arm/cpu/arm920t/a320/Makefile deleted file mode 100644 index bbdab588c5..0000000000 --- a/arch/arm/cpu/arm920t/a320/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += reset.o -obj-y += timer.o diff --git a/arch/arm/cpu/arm920t/a320/reset.S b/arch/arm/cpu/arm920t/a320/reset.S deleted file mode 100644 index 81f9dc983f..0000000000 --- a/arch/arm/cpu/arm920t/a320/reset.S +++ /dev/null @@ -1,10 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.global reset_cpu -reset_cpu: - b reset_cpu diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c deleted file mode 100644 index 1ac5b60129..0000000000 --- a/arch/arm/cpu/arm920t/a320/timer.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <div64.h> -#include <asm/io.h> -#include <faraday/ftpmu010.h> -#include <faraday/fttmr010.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define TIMER_CLOCK 32768 -#define TIMER_LOAD_VAL 0xffffffff - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - -int timer_init(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - unsigned int cr; - - debug("%s()\n", __func__); - - /* disable timers */ - writel(0, &tmr->cr); - - /* use 32768Hz oscillator for RTC, WDT, TIMER */ - ftpmu010_32768osc_enable(); - - /* setup timer */ - writel(TIMER_LOAD_VAL, &tmr->timer3_load); - writel(TIMER_LOAD_VAL, &tmr->timer3_counter); - writel(0, &tmr->timer3_match1); - writel(0, &tmr->timer3_match2); - - /* we don't want timer to issue interrupts */ - writel(FTTMR010_TM3_MATCH1 | - FTTMR010_TM3_MATCH2 | - FTTMR010_TM3_OVERFLOW, - &tmr->interrupt_mask); - - cr = readl(&tmr->cr); - cr |= FTTMR010_TM3_CLOCK; /* use external clock */ - cr |= FTTMR010_TM3_ENABLE; - writel(cr, &tmr->cr); - - gd->arch.timer_rate_hz = TIMER_CLOCK; - gd->arch.tbu = gd->arch.tbl = 0; - - return 0; -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* - * Return the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} diff --git a/arch/arm/cpu/arm920t/ks8695/Makefile b/arch/arm/cpu/arm920t/ks8695/Makefile deleted file mode 100644 index 400aa89e99..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = lowlevel_init.o -obj-y += timer.o diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S deleted file mode 100644 index a2a07f2f23..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S +++ /dev/null @@ -1,189 +0,0 @@ -/* - * lowlevel_init.S - basic hardware initialization for the KS8695 CPU - * - * Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/platform.h> - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - -/* - ************************************************************************* - * - * Handy dandy macros - * - ************************************************************************* - */ - -/* Delay a bit */ -.macro DELAY_FOR cycles, reg0 - ldr \reg0, =\cycles - subs \reg0, \reg0, #1 - subne pc, pc, #0xc -.endm - -/* - ************************************************************************* - * - * Some local storage. - * - ************************************************************************* - */ - -/* Should we boot with an interactive console or not */ -.globl serial_console - -/* - ************************************************************************* - * - * Raw hardware initialization code. The important thing is to get - * SDRAM setup and running. We do some other basic things here too, - * like getting the PLL set for high speed, and init the LEDs. - * - ************************************************************************* - */ - -.globl lowlevel_init -lowlevel_init: - -#if DEBUG - /* - * enable UART for early debug trace - */ - ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR) - mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE) - str r2, [r1] - ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL) - mov r2, #KS8695_UART_LINEC_WLEN8 - str r2, [r1] /* 8 data bits, no parity, 1 stop */ - ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) - mov r2, #0x41 - str r2, [r1] /* write 'A' */ -#endif -#if DEBUG - ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) - mov r2, #0x42 - str r2, [r1] -#endif - - /* - * remap the memory and flash regions. we want to end up with - * ram from address 0, and flash at 32MB. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0) - ldr r2, =0xbfc00040 - str r2, [r1] /* large flash map */ - ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash address */ -highflash: - ldr r2, =0x8fe00040 - str r2, [r1] /* remap flash range */ - - /* - * remap the second select region to the 4MB immediately after - * the first region. This way if you have a larger flash (say 8Mb) - * then you can have it all mapped nicely. Has no effect if you - * only have a 4Mb or smaller flash. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1) - ldr r2, =0x9fe40040 - str r2, [r1] /* remap flash2 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL) - ldr r2, =0x30000005 - str r2, [r1] /* enable both flash selects */ - -#ifdef CONFIG_CM41xx - /* - * map the second flash chip, using the external IO lines. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0) - ldr r2, =0xafe80b6d - str r2, [r1] /* remap io0 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1) - ldr r2, =0xbfec0b6d - str r2, [r1] /* remap io1 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL) - ldr r2, =0x30050005 - str r2, [r1] /* enable second flash */ -#endif - - /* - * before relocating, we have to setup RAM timing - */ - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0) -#if (PHYS_SDRAM_1_SIZE == 0x02000000) - ldr r2, =0x7fc0000e /* 32MB */ -#else - ldr r2, =0x3fc0000e /* 16MB */ -#endif - str r2, [r1] /* configure sdram bank0 setup */ - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1) - mov r2, #0 - str r2, [r1] /* configure sdram bank1 setup */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL) - ldr r2, =0x0000000a - str r2, [r1] /* set RAS/CAS timing */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER) - ldr r2, =0x00030000 - str r2, [r1] /* send NOP command */ - DELAY_FOR 0x100, r0 - ldr r2, =0x00010000 - str r2, [r1] /* send PRECHARGE-ALL */ - DELAY_FOR 0x100, r0 - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH) - ldr r2, =0x00000020 - str r2, [r1] /* set for fast refresh */ - DELAY_FOR 0x100, r0 - ldr r2, =0x00000190 - str r2, [r1] /* set normal refresh timing */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER) - ldr r2, =0x00020033 - str r2, [r1] /* send mode command */ - DELAY_FOR 0x100, r0 - ldr r2, =0x01f00000 - str r2, [r1] /* enable sdram fifos */ - - /* - * set pll to top speed - */ - ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK) - mov r2, #0 - str r2, [r1] /* set pll clock to 166MHz */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0) - ldr r2, [r1] /* Get switch ctrl0 register */ - and r2, r2, #0x0fc00000 /* Mask out LED control bits */ - orr r2, r2, #0x01800000 /* Set Link/activity/speed actions */ - str r2, [r1] - -#ifdef CONFIG_CM4008 - ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE) - ldr r2, =0x0000fe30 - str r2, [r1] /* enable LED's as outputs */ - ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA) - ldr r2, =0x0000fe20 - str r2, [r1] /* turn on power LED */ -#endif -#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx) - ldr r2, [r1] /* get current GPIO input data */ - tst r2, #0x8 /* check if "erase" depressed */ - beq nobutton - mov r2, #0 /* be quiet on boot, no console */ - ldr r1, =serial_console - str r2, [r1] -nobutton: -#endif - - add lr, lr, #0x02000000 /* flash is now mapped high */ - add ip, ip, #0x02000000 /* this is a hack */ - mov pc, lr /* all done, return */ - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/arm/cpu/arm920t/ks8695/timer.c b/arch/arm/cpu/arm920t/ks8695/timer.c deleted file mode 100644 index 23db5572de..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/timer.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> - -/* - * Initial timer set constants. Nothing complicated, just set for a 1ms - * tick. - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_1) -#define TIMER_COUNT (TIMER_INTERVAL / 2) -#define TIMER_PULSE TIMER_COUNT - -/* - * Handy KS8695 register access functions. - */ -#define ks8695_read(a) *((volatile ulong *) (KS8695_IO_BASE + (a))) -#define ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v) - -ulong timer_ticks; - -int timer_init (void) -{ - /* Set the hadware timer for 1ms */ - ks8695_write(KS8695_TIMER1, TIMER_COUNT); - ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE); - ks8695_write(KS8695_TIMER_CTRL, 0x2); - timer_ticks = 0; - - return 0; -} - -ulong get_timer_masked(void) -{ - /* Check for timer wrap */ - if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) { - /* Clear interrupt condition */ - ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1); - timer_ticks++; - } - return timer_ticks; -} - -ulong get_timer(ulong base) -{ - return (get_timer_masked() - base); -} - -void __udelay(ulong usec) -{ - ulong start = get_timer_masked(); - ulong end; - - /* Only 1ms resolution :-( */ - end = usec / 1000; - while (get_timer(start) < end) - ; -} - -void reset_cpu (ulong ignored) -{ - ulong tc; - - /* Set timer0 to watchdog, and let it timeout */ - tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2; - ks8695_write(KS8695_TIMER_CTRL, tc); - ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff)); - ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1)); - - /* Should only wait here till watchdog resets */ - for (;;) - ; -} diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index f5944cc965..63fa159db6 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -16,9 +16,7 @@ endif obj-$(CONFIG_ARMADA100) += armada100/ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/ -obj-$(CONFIG_MB86R0x) += mb86r0x/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ -obj-$(CONFIG_PANTHEON) += pantheon/ obj-$(if $(filter spear,$(SOC)),y) += spear/ diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile deleted file mode 100644 index 365892c413..0000000000 --- a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = clock.o reset.o timer.o diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/clock.c b/arch/arm/cpu/arm926ejs/mb86r0x/clock.c deleted file mode 100644 index 1f6f66eba2..0000000000 --- a/arch/arm/cpu/arm926ejs/mb86r0x/clock.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -/* - * Get the peripheral bus frequency depending on pll pin settings - */ -ulong get_bus_freq(ulong dummy) -{ - struct mb86r0x_crg * crg = (struct mb86r0x_crg *) - MB86R0x_CRG_BASE; - uint32_t pllmode; - - pllmode = readl(&crg->crpr) & MB86R0x_CRG_CRPR_PLLMODE; - - if (pllmode == MB86R0x_CRG_CRPR_PLLMODE_X20) - return 40000000; - - return 41164767; -} diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/reset.c b/arch/arm/cpu/arm926ejs/mb86r0x/reset.c deleted file mode 100644 index 7bd77ff202..0000000000 --- a/arch/arm/cpu/arm926ejs/mb86r0x/reset.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -/* - * Reset the cpu by setting software reset request bit - */ -void reset_cpu(ulong ignored) -{ - struct mb86r0x_crg * crg = (struct mb86r0x_crg *) - MB86R0x_CRG_BASE; - - writel(MB86R0x_CRSR_SWRSTREQ, &crg->crsr); - while (1) - /* NOP */; - /* Never reached */ -} diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c deleted file mode 100644 index bb078196d0..0000000000 --- a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2010 - * Matthias Weisser, Graf-Syteco <weisserm@arcor.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <div64.h> -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -#define TIMER_LOAD_VAL 0xffffffff -#define TIMER_FREQ (CONFIG_MB86R0x_IOCLK / 256) - -DECLARE_GLOBAL_DATA_PTR; - -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, TIMER_FREQ); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= TIMER_FREQ; - do_div(usec, 1000000); - - return usec; -} - -/* nothing really to do with interrupts, just starts up a counter. */ -int timer_init(void) -{ - struct mb86r0x_timer * timer = (struct mb86r0x_timer *) - MB86R0x_TIMER_BASE; - ulong ctrl = readl(&timer->control); - - writel(TIMER_LOAD_VAL, &timer->load); - - ctrl |= MB86R0x_TIMER_ENABLE | MB86R0x_TIMER_PRS_8S | - MB86R0x_TIMER_SIZE_32; - - writel(ctrl, &timer->control); - - /* capture current value time */ - lastdec = readl(&timer->value); - timestamp = 0; /* start "advancing" time stamp from 0 */ - - return 0; -} - -/* - * timer without interrupts - */ -unsigned long long get_ticks(void) -{ - struct mb86r0x_timer * timer = (struct mb86r0x_timer *) - MB86R0x_TIMER_BASE; - ulong now = readl(&timer->value); - - if (now <= lastdec) { - /* normal mode (non roll) */ - /* move stamp forward with absolut diff ticks */ - timestamp += lastdec - now; - } else { - /* we have rollover of incrementer */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - lastdec = now; - return timestamp; -} - -ulong get_timer_masked(void) -{ - return tick_to_time(get_ticks()); -} - -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = usec_to_tick(usec); - tmp = get_ticks(); /* get current timestamp */ - - while ((get_ticks() - tmp) < tmo) /* loop till event */ - /*NOP*/; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - ulong tbclk; - - tbclk = TIMER_FREQ; - return tbclk; -} diff --git a/arch/arm/cpu/arm926ejs/pantheon/Makefile b/arch/arm/cpu/arm926ejs/pantheon/Makefile deleted file mode 100644 index 988341f8fb..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Lei Wen <leiwen@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o timer.o dram.o diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c deleted file mode 100644 index 4e2a177c0d..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/cpu.h> -#include <asm/arch/pantheon.h> - -#define UARTCLK14745KHZ (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1)) -#define SET_MRVL_ID (1<<8) -#define L2C_RAM_SEL (1<<4) - -int arch_cpu_init(void) -{ - u32 val; - struct panthcpu_registers *cpuregs = - (struct panthcpu_registers*) PANTHEON_CPU_BASE; - - struct panthapb_registers *apbclkres = - (struct panthapb_registers*) PANTHEON_APBC_BASE; - - struct panthmpmu_registers *mpmu = - (struct panthmpmu_registers*) PANTHEON_MPMU_BASE; - - struct panthapmu_registers *apmu = - (struct panthapmu_registers *) PANTHEON_APMU_BASE; - - /* set SEL_MRVL_ID bit in PANTHEON_CPU_CONF register */ - val = readl(&cpuregs->cpu_conf); - val = val | SET_MRVL_ID; - writel(val, &cpuregs->cpu_conf); - - /* Turn on clock gating (PMUM_CCGR) */ - writel(0xFFFFFFFF, &mpmu->ccgr); - - /* Turn on clock gating (PMUM_ACGR) */ - writel(0xFFFFFFFF, &mpmu->acgr); - - /* Turn on uart2 clock */ - writel(UARTCLK14745KHZ, &apbclkres->uart0); - - /* Enable GPIO clock */ - writel(APBC_APBCLK, &apbclkres->gpio); - -#ifdef CONFIG_I2C_MV - /* Enable I2C clock */ - writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); - writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); -#endif - -#ifdef CONFIG_MV_SDHCI - /* Enable mmc clock */ - writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST, - &apmu->sd1); - writel(APMU_PERI_CLK | APMU_AXI_CLK | APMU_PERI_RST | APMU_AXI_RST, - &apmu->sd3); -#endif - - icache_enable(); - - return 0; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - u32 id; - struct panthcpu_registers *cpuregs = - (struct panthcpu_registers*) PANTHEON_CPU_BASE; - - id = readl(&cpuregs->chip_id); - printf("SoC: PANTHEON 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10)); - return 0; -} -#endif - -#ifdef CONFIG_I2C_MV -void i2c_clk_enable(void) -{ -} -#endif diff --git a/arch/arm/cpu/arm926ejs/pantheon/dram.c b/arch/arm/cpu/arm926ejs/pantheon/dram.c deleted file mode 100644 index f77e3d0ab5..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/dram.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com>, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/pantheon.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Pantheon DRAM controller supports upto 8 banks - * for chip select 0 and 1 - */ - -/* - * DDR Memory Control Registers - * Refer Datasheet 4.4 - */ -struct panthddr_map_registers { - u32 cs; /* Memory Address Map Register -CS */ - u32 pad[3]; -}; - -struct panthddr_registers { - u8 pad[0x100 - 0x000]; - struct panthddr_map_registers mmap[2]; -}; - -/* - * panth_sdram_base - reads SDRAM Base Address Register - */ -u32 panth_sdram_base(int chip_sel) -{ - struct panthddr_registers *ddr_regs = - (struct panthddr_registers *)PANTHEON_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000; - return result; -} - -/* - * panth_sdram_size - reads SDRAM size - */ -u32 panth_sdram_size(int chip_sel) -{ - struct panthddr_registers *ddr_regs = - (struct panthddr_registers *)PANTHEON_DRAM_BASE; - u32 result = 0; - u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs); - - if (!CS_valid) - return 0; - - result = readl(&ddr_regs->mmap[chip_sel].cs); - result = (result >> 16) & 0xF; - if (result < 0x7) { - printf("Unknown DRAM Size\n"); - return -1; - } else { - return ((0x8 << (result - 0x7)) * 1024 * 1024); - } -} - -#ifndef CONFIG_SYS_BOARD_DRAM_INIT -int dram_init(void) -{ - int i; - - gd->ram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = panth_sdram_base(i); - gd->bd->bi_dram[i].size = panth_sdram_size(i); - /* - * It is assumed that all memory banks are consecutive - * and without gaps. - * If the gap is found, ram_size will be reported for - * consecutive memory only - */ - if (gd->bd->bi_dram[i].start != gd->ram_size) - break; - - gd->ram_size += gd->bd->bi_dram[i].size; - - } - - for (; i < CONFIG_NR_DRAM_BANKS; i++) { - /* - * If above loop terminated prematurely, we need to set - * remaining banks' start address & size as 0. Otherwise other - * u-boot functions and Linux kernel gets wrong values which - * could result in crash - */ - gd->bd->bi_dram[i].start = 0; - gd->bd->bi_dram[i].size = 0; - } - return 0; -} - -/* - * If this function is not defined here, - * board.c alters dram bank zero configuration defined above. - */ -void dram_init_banksize(void) -{ - dram_init(); -} -#endif /* CONFIG_SYS_BOARD_DRAM_INIT */ diff --git a/arch/arm/cpu/arm926ejs/pantheon/timer.c b/arch/arm/cpu/arm926ejs/pantheon/timer.c deleted file mode 100644 index 6382d3b0cf..0000000000 --- a/arch/arm/cpu/arm926ejs/pantheon/timer.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/cpu.h> -#include <asm/arch/pantheon.h> - -/* - * Timer registers - * Refer 6.2.9 in Datasheet - */ -struct panthtmr_registers { - u32 clk_ctrl; /* Timer clk control reg */ - u32 match[9]; /* Timer match registers */ - u32 count[3]; /* Timer count registers */ - u32 status[3]; - u32 ie[3]; - u32 preload[3]; /* Timer preload value */ - u32 preload_ctrl[3]; - u32 wdt_match_en; - u32 wdt_match_r; - u32 wdt_val; - u32 wdt_sts; - u32 icr[3]; - u32 wdt_icr; - u32 cer; /* Timer count enable reg */ - u32 cmr; - u32 ilr[3]; - u32 wcr; - u32 wfar; - u32 wsar; - u32 cvwr[3]; -}; - -#define TIMER 0 /* Use TIMER 0 */ -/* Each timer has 3 match registers */ -#define MATCH_CMP(x) ((3 * TIMER) + x) -#define TIMER_LOAD_VAL 0xffffffff -#define COUNT_RD_REQ 0x1 - -DECLARE_GLOBAL_DATA_PTR; -/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */ - -/* - * For preventing risk of instability in reading counter value, - * first set read request to register cvwr and then read same - * register after it captures counter value. - */ -ulong read_timer(void) -{ - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_TIMER_BASE; - volatile int loop=100; - ulong val; - - writel(COUNT_RD_REQ, &panthtimers->cvwr); - while (loop--) - val = readl(&panthtimers->cvwr); - - /* - * This stop gcc complain and prevent loop mistake init to 0 - */ - val = readl(&panthtimers->cvwr); - - return val; -} - -ulong get_timer_masked(void) -{ - ulong now = read_timer(); - - if (now >= gd->arch.tbl) { - /* normal mode */ - gd->arch.tbu += now - gd->arch.tbl; - } else { - /* we have an overflow ... */ - gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl; - } - gd->arch.tbl = now; - - return gd->arch.tbu; -} - -ulong get_timer(ulong base) -{ - return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) - - base); -} - -void __udelay(unsigned long usec) -{ - ulong delayticks; - ulong endtime; - - delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000)); - endtime = get_timer_masked() + delayticks; - - while (get_timer_masked() < endtime) - ; -} - -/* - * init the Timer - */ -int timer_init(void) -{ - struct panthapb_registers *apb1clkres = - (struct panthapb_registers *) PANTHEON_APBC_BASE; - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_TIMER_BASE; - - /* Enable Timer clock at 3.25 MHZ */ - writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers); - - /* load value into timer */ - writel(0x0, &panthtimers->clk_ctrl); - /* Use Timer 0 Match Resiger 0 */ - writel(TIMER_LOAD_VAL, &panthtimers->match[MATCH_CMP(0)]); - /* Preload value is 0 */ - writel(0x0, &panthtimers->preload[TIMER]); - /* Enable match comparator 0 for Timer 0 */ - writel(0x1, &panthtimers->preload_ctrl[TIMER]); - - /* Enable timer 0 */ - writel(0x1, &panthtimers->cer); - /* init the gd->arch.tbu and gd->arch.tbl value */ - gd->arch.tbl = read_timer(); - gd->arch.tbu = 0; - - return 0; -} - -#define MPMU_APRR_WDTR (1<<4) -#define TMR_WFAR 0xbaba /* WDT Register First key */ -#define TMP_WSAR 0xeb10 /* WDT Register Second key */ - -/* - * This function uses internal Watchdog Timer - * based reset mechanism. - * Steps to write watchdog registers (protected access) - * 1. Write key value to TMR_WFAR reg. - * 2. Write key value to TMP_WSAR reg. - * 3. Perform write operation. - */ -void reset_cpu (unsigned long ignored) -{ - struct panthmpmu_registers *mpmu = - (struct panthmpmu_registers *) PANTHEON_MPMU_BASE; - struct panthtmr_registers *panthtimers = - (struct panthtmr_registers *) PANTHEON_WD_TIMER_BASE; - u32 val; - - /* negate hardware reset to the WDT after system reset */ - val = readl(&mpmu->aprr); - val = val | MPMU_APRR_WDTR; - writel(val, &mpmu->aprr); - - /* reset/enable WDT clock */ - writel(APBC_APBCLK, &mpmu->wdtpcr); - - /* clear previous WDT status */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0, &panthtimers->wdt_sts); - - /* set match counter */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0xf, &panthtimers->wdt_match_r); - - /* enable WDT reset */ - writel(TMR_WFAR, &panthtimers->wfar); - writel(TMP_WSAR, &panthtimers->wsar); - writel(0x3, &panthtimers->wdt_match_en); - - /*enable functional WDT clock */ - writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - return (ulong)CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 2064efa761..eb86a7fe7d 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -6,7 +6,7 @@ choice config TARGET_SMDKV310 select SUPPORT_SPL bool "Exynos4210 SMDKV310 board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_TRATS bool "Exynos4210 Trats board" @@ -33,32 +33,32 @@ config TARGET_ARNDALE select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_SMDK5250 bool "SMDK5250 board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_SNOW bool "Snow board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_SMDK5420 bool "SMDK5420 board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_PEACH_PI bool "Peach Pi board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_PEACH_PIT bool "Peach Pit board" select SUPPORT_SPL - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL endchoice @@ -66,25 +66,25 @@ config SYS_SOC default "exynos" config DM - default y if !SPL_BUILD + default y config DM_SERIAL - default y if !SPL_BUILD + default y config DM_SPI - default y if !SPL_BUILD + default y config DM_SPI_FLASH - default y if !SPL_BUILD + default y config DM_GPIO - default y if !SPL_BUILD + default y config SYS_MALLOC_F - default y if !SPL_BUILD + default y config SYS_MALLOC_F_LEN - default 0x400 if !SPL_BUILD + default 0x400 source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 46440981b3..4a0ac2c987 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -94,19 +94,19 @@ config TARGET_TWISTER endchoice config DM - default y if !SPL_BUILD + default y config DM_GPIO - default y if DM && !SPL_BUILD + default y if DM config DM_SERIAL - default y if DM && !SPL_BUILD + default y if DM config SYS_MALLOC_F - default y if DM && !SPL_BUILD + default y if DM config SYS_MALLOC_F_LEN - default 0x400 if DM && !SPL_BUILD + default 0x400 if DM config SYS_SOC default "omap3" diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig index 628813423f..bc73813832 100644 --- a/arch/arm/cpu/armv7/s5pc1xx/Kconfig +++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig @@ -5,11 +5,11 @@ choice config TARGET_S5P_GONI bool "S5P Goni board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL config TARGET_SMDKC100 bool "Support smdkc100 board" - select OF_CONTROL if !SPL_BUILD + select OF_CONTROL endchoice diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 1a47ac9029..8335685e32 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -52,7 +52,7 @@ config SYS_MALLOC_F default y config SYS_MALLOC_F_LEN - default 0x2000 + default 0x400 config CMD_PINMON bool "Enable boot mode pins monitor command" @@ -64,14 +64,12 @@ config CMD_PINMON config CMD_DDRPHY_DUMP bool "Enable dump command of DDR PHY parameters" - depends on !SPL_BUILD help The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. choice prompt "DDR3 Frequency select" - depends on SPL_BUILD config DDR_FREQ_1600 bool "DDR3 1600" diff --git a/arch/arm/include/asm/arch-a320/a320.h b/arch/arm/include/asm/arch-a320/a320.h deleted file mode 100644 index f2db8e1061..0000000000 --- a/arch/arm/include/asm/arch-a320/a320.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __A320_H -#define __A320_H - -/* - * Hardware register bases - */ -#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */ -#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */ -#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */ -#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */ -#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */ -#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */ -#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/ - -#endif /* __A320_H */ diff --git a/arch/arm/include/asm/arch-ks8695/platform.h b/arch/arm/include/asm/arch-ks8695/platform.h deleted file mode 100644 index 02f6049263..0000000000 --- a/arch/arm/include/asm/arch-ks8695/platform.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __address_h -#define __address_h 1 - -#define KS8695_SDRAM_START 0x00000000 -#define KS8695_SDRAM_SIZE 0x01000000 -#define KS8695_MEM_SIZE KS8695_SDRAM_SIZE -#define KS8695_MEM_START KS8695_SDRAM_START - -#define KS8695_PCMCIA_IO_BASE 0x03800000 -#define KS8695_PCMCIA_IO_SIZE 0x00040000 - -#define KS8695_IO_BASE 0x03FF0000 -#define KS8695_IO_SIZE 0x00010000 - -#define KS8695_SYSTEN_CONFIG 0x00 -#define KS8695_SYSTEN_BUS_CLOCK 0x04 - -#define KS8695_FLASH_START 0x02800000 -#define KS8695_FLASH_SIZE 0x00400000 - -/*i/o control registers offset difinitions*/ -#define KS8695_IO_CTRL0 0x4000 -#define KS8695_IO_CTRL1 0x4004 -#define KS8695_IO_CTRL2 0x4008 -#define KS8695_IO_CTRL3 0x400C - -/*memory control registers offset difinitions*/ -#define KS8695_MEM_CTRL0 0x4010 -#define KS8695_MEM_CTRL1 0x4014 -#define KS8695_MEM_CTRL2 0x4018 -#define KS8695_MEM_CTRL3 0x401C -#define KS8695_MEM_GENERAL 0x4020 -#define KS8695_SDRAM_CTRL0 0x4030 -#define KS8695_SDRAM_CTRL1 0x4034 -#define KS8695_SDRAM_GENERAL 0x4038 -#define KS8695_SDRAM_BUFFER 0x403C -#define KS8695_SDRAM_REFRESH 0x4040 - -/*WAN control registers offset difinitions*/ -#define KS8695_WAN_DMA_TX 0x6000 -#define KS8695_WAN_DMA_RX 0x6004 -#define KS8695_WAN_DMA_TX_START 0x6008 -#define KS8695_WAN_DMA_RX_START 0x600C -#define KS8695_WAN_TX_LIST 0x6010 -#define KS8695_WAN_RX_LIST 0x6014 -#define KS8695_WAN_MAC_LOW 0x6018 -#define KS8695_WAN_MAC_HIGH 0x601C -#define KS8695_WAN_MAC_ELOW 0x6080 -#define KS8695_WAN_MAC_EHIGH 0x6084 - -/*LAN control registers offset difinitions*/ -#define KS8695_LAN_DMA_TX 0x8000 -#define KS8695_LAN_DMA_RX 0x8004 -#define KS8695_LAN_DMA_TX_START 0x8008 -#define KS8695_LAN_DMA_RX_START 0x800C -#define KS8695_LAN_TX_LIST 0x8010 -#define KS8695_LAN_RX_LIST 0x8014 -#define KS8695_LAN_MAC_LOW 0x8018 -#define KS8695_LAN_MAC_HIGH 0x801C -#define KS8695_LAN_MAC_ELOW 0X8080 -#define KS8695_LAN_MAC_EHIGH 0X8084 - -/*HPNA control registers offset difinitions*/ -#define KS8695_HPNA_DMA_TX 0xA000 -#define KS8695_HPNA_DMA_RX 0xA004 -#define KS8695_HPNA_DMA_TX_START 0xA008 -#define KS8695_HPNA_DMA_RX_START 0xA00C -#define KS8695_HPNA_TX_LIST 0xA010 -#define KS8695_HPNA_RX_LIST 0xA014 -#define KS8695_HPNA_MAC_LOW 0xA018 -#define KS8695_HPNA_MAC_HIGH 0xA01C -#define KS8695_HPNA_MAC_ELOW 0xA080 -#define KS8695_HPNA_MAC_EHIGH 0xA084 - -/*UART control registers offset difinitions*/ -#define KS8695_UART_RX_BUFFER 0xE000 -#define KS8695_UART_TX_HOLDING 0xE004 - -#define KS8695_UART_FIFO_CTRL 0xE008 -#define KS8695_UART_FIFO_TRIG01 0x00 -#define KS8695_UART_FIFO_TRIG04 0x80 -#define KS8695_UART_FIFO_TXRST 0x03 -#define KS8695_UART_FIFO_RXRST 0x02 -#define KS8695_UART_FIFO_FEN 0x01 - -#define KS8695_UART_LINE_CTRL 0xE00C -#define KS8695_UART_LINEC_BRK 0x40 -#define KS8695_UART_LINEC_EPS 0x10 -#define KS8695_UART_LINEC_PEN 0x08 -#define KS8695_UART_LINEC_STP2 0x04 -#define KS8695_UART_LINEC_WLEN8 0x03 -#define KS8695_UART_LINEC_WLEN7 0x02 -#define KS8695_UART_LINEC_WLEN6 0x01 -#define KS8695_UART_LINEC_WLEN5 0x00 - -#define KS8695_UART_MODEM_CTRL 0xE010 -#define KS8695_UART_MODEMC_RTS 0x02 -#define KS8695_UART_MODEMC_DTR 0x01 - -#define KS8695_UART_LINE_STATUS 0xE014 -#define KS8695_UART_LINES_TXFE 0x20 -#define KS8695_UART_LINES_BE 0x10 -#define KS8695_UART_LINES_FE 0x08 -#define KS8695_UART_LINES_PE 0x04 -#define KS8695_UART_LINES_OE 0x02 -#define KS8695_UART_LINES_RXFE 0x01 -#define KS8695_UART_LINES_ANY (KS8695_UART_LINES_OE|KS8695_UART_LINES_BE|KS8695_UART_LINES_PE|KS8695_UART_LINES_FE) - -#define KS8695_UART_MODEM_STATUS 0xE018 -#define KS8695_UART_MODEM_DCD 0x80 -#define KS8695_UART_MODEM_DSR 0x20 -#define KS8695_UART_MODEM_CTS 0x10 -#define KS8695_UART_MODEM_DDCD 0x08 -#define KS8695_UART_MODEM_DDSR 0x02 -#define KS8695_UART_MODEM_DCTS 0x01 -#define UART8695_MODEM_ANY 0xFF - -#define KS8695_UART_DIVISOR 0xE01C -#define KS8695_UART_STATUS 0xE020 - -/*Interrupt controlller registers offset difinitions*/ -#define KS8695_INT_CONTL 0xE200 -#define KS8695_INT_ENABLE 0xE204 -#define KS8695_INT_ENABLE_MODEM 0x0800 -#define KS8695_INT_ENABLE_ERR 0x0400 -#define KS8695_INT_ENABLE_RX 0x0200 -#define KS8695_INT_ENABLE_TX 0x0100 - -#define KS8695_INT_STATUS 0xE208 -#define KS8695_INT_WAN_PRIORITY 0xE20C -#define KS8695_INT_HPNA_PRIORITY 0xE210 -#define KS8695_INT_LAN_PRIORITY 0xE214 -#define KS8695_INT_TIMER_PRIORITY 0xE218 -#define KS8695_INT_UART_PRIORITY 0xE21C -#define KS8695_INT_EXT_PRIORITY 0xE220 -#define KS8695_INT_CHAN_PRIORITY 0xE224 -#define KS8695_INT_BUSERROR_PRO 0xE228 -#define KS8695_INT_MASK_STATUS 0xE22C -#define KS8695_FIQ_PEND_PRIORITY 0xE230 -#define KS8695_IRQ_PEND_PRIORITY 0xE234 - -/*timer registers offset difinitions*/ -#define KS8695_TIMER_CTRL 0xE400 -#define KS8695_TIMER1 0xE404 -#define KS8695_TIMER0 0xE408 -#define KS8695_TIMER1_PCOUNT 0xE40C -#define KS8695_TIMER0_PCOUNT 0xE410 - -/*GPIO registers offset difinitions*/ -#define KS8695_GPIO_MODE 0xE600 -#define KS8695_GPIO_CTRL 0xE604 -#define KS8695_GPIO_DATA 0xE608 - -/*SWITCH registers offset difinitions*/ -#define KS8695_SWITCH_CTRL0 0xE800 -#define KS8695_SWITCH_CTRL1 0xE804 -#define KS8695_SWITCH_PORT1 0xE808 -#define KS8695_SWITCH_PORT2 0xE80C -#define KS8695_SWITCH_PORT3 0xE810 -#define KS8695_SWITCH_PORT4 0xE814 -#define KS8695_SWITCH_PORT5 0xE818 -#define KS8695_SWITCH_AUTO0 0xE81C -#define KS8695_SWITCH_AUTO1 0xE820 -#define KS8695_SWITCH_LUE_CTRL 0xE824 -#define KS8695_SWITCH_LUE_HIGH 0xE828 -#define KS8695_SWITCH_LUE_LOW 0xE82C -#define KS8695_SWITCH_ADVANCED 0xE830 - -#define KS8695_SWITCH_LPPM12 0xE874 -#define KS8695_SWITCH_LPPM34 0xE878 - -/*host communication registers difinitions*/ -#define KS8695_DSCP_HIGH 0xE834 -#define KS8695_DSCP_LOW 0xE838 -#define KS8695_SWITCH_MAC_HIGH 0xE83C -#define KS8695_SWITCH_MAC_LOW 0xE840 - -/*miscellaneours registers difinitions*/ -#define KS8695_MANAGE_COUNTER 0xE844 -#define KS8695_MANAGE_DATA 0xE848 -#define KS8695_LAN12_POWERMAGR 0xE84C -#define KS8695_LAN34_POWERMAGR 0xE850 - -#define KS8695_DEVICE_ID 0xEA00 -#define KS8695_REVISION_ID 0xEA04 - -#define KS8695_MISC_CONTROL 0xEA08 -#define KS8695_WAN_CONTROL 0xEA0C -#define KS8695_WAN_POWERMAGR 0xEA10 -#define KS8695_WAN_PHY_CONTROL 0xEA14 -#define KS8695_WAN_PHY_STATUS 0xEA18 - -/* bus clock definitions*/ -#define KS8695_BUS_CLOCK_125MHZ 0x0 -#define KS8695_BUS_CLOCK_100MHZ 0x1 -#define KS8695_BUS_CLOCK_62MHZ 0x2 -#define KS8695_BUS_CLOCK_50MHZ 0x3 -#define KS8695_BUS_CLOCK_41MHZ 0x4 -#define KS8695_BUS_CLOCK_33MHZ 0x5 -#define KS8695_BUS_CLOCK_31MHZ 0x6 -#define KS8695_BUS_CLOCK_25MHZ 0x7 - -/* ------------------------------------------------------------------------------- - * definations for IRQ - * -------------------------------------------------------------------------------*/ - -#define KS8695_INT_EXT_INT0 2 -#define KS8695_INT_EXT_INT1 3 -#define KS8695_INT_EXT_INT2 4 -#define KS8695_INT_EXT_INT3 5 -#define KS8695_INT_TIMERINT0 6 -#define KS8695_INT_TIMERINT1 7 -#define KS8695_INT_UART_TX 8 -#define KS8695_INT_UART_RX 9 -#define KS8695_INT_UART_LINE_ERR 10 -#define KS8695_INT_UART_MODEMS 11 -#define KS8695_INT_LAN_STOP_RX 12 -#define KS8695_INT_LAN_STOP_TX 13 -#define KS8695_INT_LAN_BUF_RX_STATUS 14 -#define KS8695_INT_LAN_BUF_TX_STATUS 15 -#define KS8695_INT_LAN_RX_STATUS 16 -#define KS8695_INT_LAN_TX_STATUS 17 -#define KS8695_INT_HPAN_STOP_RX 18 -#define KS8695_INT_HPNA_STOP_TX 19 -#define KS8695_INT_HPNA_BUF_RX_STATUS 20 -#define KS8695_INT_HPNA_BUF_TX_STATUS 21 -#define KS8695_INT_HPNA_RX_STATUS 22 -#define KS8695_INT_HPNA_TX_STATUS 23 -#define KS8695_INT_BUS_ERROR 24 -#define KS8695_INT_WAN_STOP_RX 25 -#define KS8695_INT_WAN_STOP_TX 26 -#define KS8695_INT_WAN_BUF_RX_STATUS 27 -#define KS8695_INT_WAN_BUF_TX_STATUS 28 -#define KS8695_INT_WAN_RX_STATUS 29 -#define KS8695_INT_WAN_TX_STATUS 30 - -#define KS8695_INT_UART KS8695_INT_UART_TX - -/* ------------------------------------------------------------------------------- - * Interrupt bit positions - * - * ------------------------------------------------------------------------------- - */ - -#define KS8695_INTMASK_EXT_INT0 ( 1 << KS8695_INT_EXT_INT0 ) -#define KS8695_INTMASK_EXT_INT1 ( 1 << KS8695_INT_EXT_INT1 ) -#define KS8695_INTMASK_EXT_INT2 ( 1 << KS8695_INT_EXT_INT2 ) -#define KS8695_INTMASK_EXT_INT3 ( 1 << KS8695_INT_EXT_INT3 ) -#define KS8695_INTMASK_TIMERINT0 ( 1 << KS8695_INT_TIMERINT0 ) -#define KS8695_INTMASK_TIMERINT1 ( 1 << KS8695_INT_TIMERINT1 ) -#define KS8695_INTMASK_UART_TX ( 1 << KS8695_INT_UART_TX ) -#define KS8695_INTMASK_UART_RX ( 1 << KS8695_INT_UART_RX ) -#define KS8695_INTMASK_UART_LINE_ERR ( 1 << KS8695_INT_UART_LINE_ERR ) -#define KS8695_INTMASK_UART_MODEMS ( 1 << KS8695_INT_UART_MODEMS ) -#define KS8695_INTMASK_LAN_STOP_RX ( 1 << KS8695_INT_LAN_STOP_RX ) -#define KS8695_INTMASK_LAN_STOP_TX ( 1 << KS8695_INT_LAN_STOP_TX ) -#define KS8695_INTMASK_LAN_BUF_RX_STATUS ( 1 << KS8695_INT_LAN_BUF_RX_STATUS ) -#define KS8695_INTMASK_LAN_BUF_TX_STATUS ( 1 << KS8695_INT_LAN_BUF_TX_STATUS ) -#define KS8695_INTMASK_LAN_RX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS ) -#define KS8695_INTMASK_LAN_TX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS ) -#define KS8695_INTMASK_HPAN_STOP_RX ( 1 << KS8695_INT_HPAN_STOP_RX ) -#define KS8695_INTMASK_HPNA_STOP_TX ( 1 << KS8695_INT_HPNA_STOP_TX ) -#define KS8695_INTMASK_HPNA_BUF_RX_STATUS ( 1 << KS8695_INT_HPNA_BUF_RX_STATUS ) -#define KS8695_INTMAKS_HPNA_BUF_TX_STATUS ( 1 << KS8695_INT_HPNA_BUF_TX_STATUS -#define KS8695_INTMASK_HPNA_RX_STATUS ( 1 << KS8695_INT_HPNA_RX_STATUS ) -#define KS8695_INTMASK_HPNA_TX_STATUS ( 1 << KS8695_INT_HPNA_TX_STATUS ) -#define KS8695_INTMASK_BUS_ERROR ( 1 << KS8695_INT_BUS_ERROR ) -#define KS8695_INTMASK_WAN_STOP_RX ( 1 << KS8695_INT_WAN_STOP_RX ) -#define KS8695_INTMASK_WAN_STOP_TX ( 1 << KS8695_INT_WAN_STOP_TX ) -#define KS8695_INTMASK_WAN_BUF_RX_STATUS ( 1 << KS8695_INT_WAN_BUF_RX_STATUS ) -#define KS8695_INTMASK_WAN_BUF_TX_STATUS ( 1 << KS8695_INT_WAN_BUF_TX_STATUS ) -#define KS8695_INTMASK_WAN_RX_STATUS ( 1 << KS8695_INT_WAN_RX_STATUS ) -#define KS8695_INTMASK_WAN_TX_STATUS ( 1 << KS8695_INT_WAN_TX_STATUS ) - -#define KS8695_SC_VALID_INT 0xFFFFFFFF -#define MAXIRQNUM 31 - -/* - * Timer definitions - * - * Use timer 1 & 2 - * (both run at 25MHz). - * - */ -#define TICKS_PER_uSEC 25 -#define mSEC_1 1000 -#define mSEC_10 (mSEC_1 * 10) - -#endif - -/* END */ diff --git a/arch/arm/include/asm/arch-mb86r0x/hardware.h b/arch/arm/include/asm/arch-mb86r0x/hardware.h deleted file mode 100644 index 42a52bc36c..0000000000 --- a/arch/arm/include/asm/arch-mb86r0x/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * (C) Copyright 2007 - * - * Author : Carsten Schneider, mycable GmbH - * <cs@mycable.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <linux/sizes.h> -#include <asm/arch/mb86r0x.h> - -#endif diff --git a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h deleted file mode 100644 index 7fec9715b1..0000000000 --- a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h +++ /dev/null @@ -1,599 +0,0 @@ -/* - * (C) Copyright 2007 - * - * mb86r0x definitions - * - * Author : Carsten Schneider, mycable GmbH - * <cs@mycable.de> - * - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef MB86R0X_H -#define MB86R0X_H - -#ifndef __ASSEMBLY__ - -/* GPIO registers */ -struct mb86r0x_gpio { - uint32_t gpdr0; - uint32_t gpdr1; - uint32_t gpdr2; - uint32_t res; - uint32_t gpddr0; - uint32_t gpddr1; - uint32_t gpddr2; -}; - -/* PWM registers */ -struct mb86r0x_pwm { - uint32_t bcr; - uint32_t tpr; - uint32_t pr; - uint32_t dr; - uint32_t cr; - uint32_t sr; - uint32_t ccr; - uint32_t ir; -}; - -/* The mb86r0x chip control (CCNT) register set. */ -struct mb86r0x_ccnt { - uint32_t ccid; - uint32_t csrst; - uint32_t pad0[2]; - uint32_t cist; - uint32_t cistm; - uint32_t cgpio_ist; - uint32_t cgpio_istm; - uint32_t cgpio_ip; - uint32_t cgpio_im; - uint32_t caxi_bw; - uint32_t caxi_ps; - uint32_t cmux_md; - uint32_t cex_pin_st; - uint32_t cmlb; - uint32_t pad1[1]; - uint32_t cusb; - uint32_t pad2[41]; - uint32_t cbsc; - uint32_t cdcrc; - uint32_t cmsr0; - uint32_t cmsr1; - uint32_t pad3[2]; -}; - -/* The mb86r0x clock reset generator */ -struct mb86r0x_crg { - uint32_t crpr; - uint32_t pad0; - uint32_t crwr; - uint32_t crsr; - uint32_t crda; - uint32_t crdb; - uint32_t crha; - uint32_t crpa; - uint32_t crpb; - uint32_t crhb; - uint32_t cram; -}; - -/* The mb86r0x timer */ -struct mb86r0x_timer { - uint32_t load; - uint32_t value; - uint32_t control; - uint32_t intclr; - uint32_t ris; - uint32_t mis; - uint32_t bgload; -}; - -/* mb86r0x gdc display controller */ -struct mb86r0x_gdc_dsp { - /* Display settings */ - uint32_t dcm0; - uint16_t pad00; - uint16_t htp; - uint16_t hdp; - uint16_t hdb; - uint16_t hsp; - uint8_t hsw; - uint8_t vsw; - uint16_t pad01; - uint16_t vtr; - uint16_t vsp; - uint16_t vdp; - uint16_t wx; - uint16_t wy; - uint16_t ww; - uint16_t wh; - - /* Layer 0 */ - uint32_t l0m; - uint32_t l0oa; - uint32_t l0da; - uint16_t l0dx; - uint16_t l0dy; - - /* Layer 1 */ - uint32_t l1m; - uint32_t cbda0; - uint32_t cbda1; - uint32_t pad02; - - /* Layer 2 */ - uint32_t l2m; - uint32_t l2oa0; - uint32_t l2da0; - uint32_t l2oa1; - uint32_t l2da1; - uint16_t l2dx; - uint16_t l2dy; - - /* Layer 3 */ - uint32_t l3m; - uint32_t l3oa0; - uint32_t l3da0; - uint32_t l3oa1; - uint32_t l3da1; - uint16_t l3dx; - uint16_t l3dy; - - /* Layer 4 */ - uint32_t l4m; - uint32_t l4oa0; - uint32_t l4da0; - uint32_t l4oa1; - uint32_t l4da1; - uint16_t l4dx; - uint16_t l4dy; - - /* Layer 5 */ - uint32_t l5m; - uint32_t l5oa0; - uint32_t l5da0; - uint32_t l5oa1; - uint32_t l5da1; - uint16_t l5dx; - uint16_t l5dy; - - /* Cursor */ - uint16_t cutc; - uint8_t cpm; - uint8_t csize; - uint32_t cuoa0; - uint16_t cux0; - uint16_t cuy0; - uint32_t cuoa1; - uint16_t cux1; - uint16_t cuy1; - - /* Layer blending */ - uint32_t l0bld; - uint32_t pad03; - uint32_t l0tc; - uint16_t l3tc; - uint16_t l2tc; - uint32_t pad04[15]; - - /* Display settings */ - uint32_t dcm1; - uint32_t dcm2; - uint32_t dcm3; - uint32_t pad05; - - /* Layer 0 extended */ - uint32_t l0em; - uint16_t l0wx; - uint16_t l0wy; - uint16_t l0ww; - uint16_t l0wh; - uint32_t pad06; - - /* Layer 1 extended */ - uint32_t l1em; - uint16_t l1wx; - uint16_t l1wy; - uint16_t l1ww; - uint16_t l1wh; - uint32_t pad07; - - /* Layer 2 extended */ - uint32_t l2em; - uint16_t l2wx; - uint16_t l2wy; - uint16_t l2ww; - uint16_t l2wh; - uint32_t pad08; - - /* Layer 3 extended */ - uint32_t l3em; - uint16_t l3wx; - uint16_t l3wy; - uint16_t l3ww; - uint16_t l3wh; - uint32_t pad09; - - /* Layer 4 extended */ - uint32_t l4em; - uint16_t l4wx; - uint16_t l4wy; - uint16_t l4ww; - uint16_t l4wh; - uint32_t pad10; - - /* Layer 5 extended */ - uint32_t l5em; - uint16_t l5wx; - uint16_t l5wy; - uint16_t l5ww; - uint16_t l5wh; - uint32_t pad11; - - /* Multi screen control */ - uint32_t msc; - uint32_t pad12[3]; - uint32_t dls; - uint32_t dbgc; - - /* Layer blending */ - uint32_t l1bld; - uint32_t l2bld; - uint32_t l3bld; - uint32_t l4bld; - uint32_t l5bld; - uint32_t pad13; - - /* Extended transparency control */ - uint32_t l0etc; - uint32_t l1etc; - uint32_t l2etc; - uint32_t l3etc; - uint32_t l4etc; - uint32_t l5etc; - uint32_t pad14[10]; - - /* YUV coefficients */ - uint32_t l1ycr0; - uint32_t l1ycr1; - uint32_t l1ycg0; - uint32_t l1ycg1; - uint32_t l1ycb0; - uint32_t l1ycb1; - uint32_t pad15[130]; - - /* Layer palletes */ - uint32_t l0pal[256]; - uint32_t l1pal[256]; - uint32_t pad16[256]; - uint32_t l2pal[256]; - uint32_t l3pal[256]; - uint32_t pad17[256]; - - /* PWM settings */ - uint32_t vpwmm; - uint16_t vpwms; - uint16_t vpwme; - uint32_t vpwmc; - uint32_t pad18[253]; -}; - -/* mb86r0x gdc capture controller */ -struct mb86r0x_gdc_cap { - uint32_t vcm; - uint32_t csc; - uint32_t vcs; - uint32_t pad01; - - uint32_t cbm; - uint32_t cboa; - uint32_t cbla; - uint16_t cihstr; - uint16_t civstr; - uint16_t cihend; - uint16_t civend; - uint32_t pad02; - - uint32_t chp; - uint32_t cvp; - uint32_t pad03[4]; - - uint32_t clpf; - uint32_t pad04; - uint32_t cmss; - uint32_t cmds; - uint32_t pad05[12]; - - uint32_t rgbhc; - uint32_t rgbhen; - uint32_t rgbven; - uint32_t pad06; - uint32_t rgbs; - uint32_t pad07[11]; - - uint32_t rgbcmy; - uint32_t rgbcmcb; - uint32_t rgbcmcr; - uint32_t rgbcmb; - uint32_t pad08[12 + 1984]; -}; - -/* mb86r0x gdc draw */ -struct mb86r0x_gdc_draw { - uint32_t ys; - uint32_t xs; - uint32_t dxdy; - uint32_t xus; - uint32_t dxudy; - uint32_t xls; - uint32_t dxldy; - uint32_t usn; - uint32_t lsn; - uint32_t pad01[7]; - uint32_t rs; - uint32_t drdx; - uint32_t drdy; - uint32_t gs; - uint32_t dgdx; - uint32_t dgdy; - uint32_t bs; - uint32_t dbdx; - uint32_t dbdy; - uint32_t pad02[7]; - uint32_t zs; - uint32_t dzdx; - uint32_t dzdy; - uint32_t pad03[13]; - uint32_t ss; - uint32_t dsdx; - uint32_t dsdy; - uint32_t ts; - uint32_t dtdx; - uint32_t dtdy; - uint32_t qs; - uint32_t dqdx; - uint32_t dqdy; - uint32_t pad04[23]; - uint32_t lpn; - uint32_t lxs; - uint32_t lxde; - uint32_t lys; - uint32_t lyde; - uint32_t lzs; - uint32_t lzde; - uint32_t pad05[13]; - uint32_t pxdc; - uint32_t pydc; - uint32_t pzdc; - uint32_t pad06[25]; - uint32_t rxs; - uint32_t rys; - uint32_t rsizex; - uint32_t rsizey; - uint32_t pad07[12]; - uint32_t saddr; - uint32_t sstride; - uint32_t srx; - uint32_t sry; - uint32_t daddr; - uint32_t dstride; - uint32_t drx; - uint32_t dry; - uint32_t brsizex; - uint32_t brsizey; - uint32_t tcolor; - uint32_t pad08[93]; - uint32_t blpo; - uint32_t pad09[7]; - uint32_t ctr; - uint32_t ifsr; - uint32_t ifcnt; - uint32_t sst; - uint32_t ds; - uint32_t pst; - uint32_t est; - uint32_t pad10; - uint32_t mdr0; - uint32_t mdr1; - uint32_t mdr2; - uint32_t mdr3; - uint32_t mdr4; - uint32_t pad14[2]; - uint32_t mdr7; - uint32_t fbr; - uint32_t xres; - uint32_t zbr; - uint32_t tbr; - uint32_t pfbr; - uint32_t cxmin; - uint32_t cxmax; - uint32_t cymin; - uint32_t cymax; - uint32_t txs; - uint32_t tis; - uint32_t toa; - uint32_t sho; - uint32_t abr; - uint32_t pad15[2]; - uint32_t fc; - uint32_t bc; - uint32_t alf; - uint32_t blp; - uint32_t pad16; - uint32_t tbc; - uint32_t pad11[42]; - uint32_t lx0dc; - uint32_t ly0dc; - uint32_t lx1dc; - uint32_t ly1dc; - uint32_t pad12[12]; - uint32_t x0dc; - uint32_t y0dc; - uint32_t x1dc; - uint32_t y1dc; - uint32_t x2dc; - uint32_t y2dc; - uint32_t pad13[666]; -}; - -/* mb86r0x gdc geometry engine */ -struct mb86r0x_gdc_geom { - uint32_t gctr; - uint32_t pad00[15]; - uint32_t gmdr0; - uint32_t gmdr1; - uint32_t gmdr2; - uint32_t pad01[237]; - uint32_t dfifog; - uint32_t pad02[767]; -}; - -/* mb86r0x gdc */ -struct mb86r0x_gdc { - uint32_t pad00[2]; - uint32_t lts; - uint32_t pad01; - uint32_t lsta; - uint32_t pad02[3]; - uint32_t ist; - uint32_t imask; - uint32_t pad03[6]; - uint32_t lsa; - uint32_t lco; - uint32_t lreq; - - uint32_t pad04[16*1024 - 19]; - struct mb86r0x_gdc_dsp dsp0; - struct mb86r0x_gdc_dsp dsp1; - uint32_t pad05[4*1024 - 2]; - uint32_t vccc; - uint32_t vcsr; - struct mb86r0x_gdc_cap cap0; - struct mb86r0x_gdc_cap cap1; - uint32_t pad06[4*1024]; - uint32_t texture_base[16*1024]; - struct mb86r0x_gdc_draw draw; - uint32_t pad07[7*1024]; - struct mb86r0x_gdc_geom geom; - uint32_t pad08[7*1024]; -}; - -/* mb86r0x ddr2c */ -struct mb86r0x_ddr2c { - uint16_t dric; - uint16_t dric1; - uint16_t dric2; - uint16_t drca; - uint16_t drcm; - uint16_t drcst1; - uint16_t drcst2; - uint16_t drcr; - uint16_t pad00[8]; - uint16_t drcf; - uint16_t pad01[7]; - uint16_t drasr; - uint16_t pad02[15]; - uint16_t drims; - uint16_t pad03[7]; - uint16_t dros; - uint16_t pad04; - uint16_t dribsodt1; - uint16_t dribsocd; - uint16_t dribsocd2; - uint16_t pad05[3]; - uint16_t droaba; - uint16_t pad06[9]; - uint16_t drobs; - uint16_t pad07[5]; - uint16_t drimr1; - uint16_t drimr2; - uint16_t drimr3; - uint16_t drimr4; - uint16_t droisr1; - uint16_t droisr2; -}; - -/* mb86r0x memc */ -struct mb86r0x_memc { - uint32_t mcfmode[8]; - uint32_t mcftim[8]; - uint32_t mcfarea[8]; -}; - -#endif /* __ASSEMBLY__ */ - -/* - * Physical Address Defines - */ -#define MB86R0x_DDR2_BASE 0xf3000000 -#define MB86R0x_GDC_BASE 0xf1fc0000 -#define MB86R0x_CCNT_BASE 0xfff42000 -#define MB86R0x_CAN0_BASE 0xfff54000 -#define MB86R0x_CAN1_BASE 0xfff55000 -#define MB86R0x_I2C0_BASE 0xfff56000 -#define MB86R0x_I2C1_BASE 0xfff57000 -#define MB86R0x_EHCI_BASE 0xfff80000 -#define MB86R0x_OHCI_BASE 0xfff81000 -#define MB86R0x_IRC1_BASE 0xfffb0000 -#define MB86R0x_MEMC_BASE 0xfffc0000 -#define MB86R0x_TIMER_BASE 0xfffe0000 -#define MB86R0x_UART0_BASE 0xfffe1000 -#define MB86R0x_UART1_BASE 0xfffe2000 -#define MB86R0x_IRCE_BASE 0xfffe4000 -#define MB86R0x_CRG_BASE 0xfffe7000 -#define MB86R0x_IRC0_BASE 0xfffe8000 -#define MB86R0x_GPIO_BASE 0xfffe9000 -#define MB86R0x_PWM0_BASE 0xfff41000 -#define MB86R0x_PWM1_BASE 0xfff41100 - -#define MB86R0x_CRSR_SWRSTREQ (1 << 1) - -/* - * Timer register bits - */ -#define MB86R0x_TIMER_ENABLE (1 << 7) -#define MB86R0x_TIMER_MODE_MSK (1 << 6) -#define MB86R0x_TIMER_MODE_FR (0 << 6) -#define MB86R0x_TIMER_MODE_PD (1 << 6) - -#define MB86R0x_TIMER_INT_EN (1 << 5) -#define MB86R0x_TIMER_PRS_MSK (3 << 2) -#define MB86R0x_TIMER_PRS_4S (1 << 2) -#define MB86R0x_TIMER_PRS_8S (1 << 3) -#define MB86R0x_TIMER_SIZE_32 (1 << 1) -#define MB86R0x_TIMER_ONE_SHT (1 << 0) - -/* - * Clock reset generator bits - */ -#define MB86R0x_CRG_CRPR_PLLRDY (1 << 8) -#define MB86R0x_CRG_CRPR_PLLMODE (0x1f << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X49 (0 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X46 (1 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X37 (2 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X20 (3 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X47 (4 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X44 (5 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X36 (6 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X19 (7 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X39 (8 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X38 (9 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X30 (10 << 0) -#define MB86R0x_CRG_CRPR_PLLMODE_X15 (11 << 0) -/* - * DDR2 controller bits - */ -#define MB86R0x_DDR2_DRCI_DRINI (1 << 15) -#define MB86R0x_DDR2_DRCI_CKEN (1 << 14) -#define MB86R0x_DDR2_DRCI_DRCMD (1 << 0) -#define MB86R0x_DDR2_DRCI_CMD (MB86R0x_DDR2_DRCI_DRINI | \ - MB86R0x_DDR2_DRCI_CKEN | \ - MB86R0x_DDR2_DRCI_DRCMD) -#define MB86R0x_DDR2_DRCI_INIT (MB86R0x_DDR2_DRCI_DRINI | \ - MB86R0x_DDR2_DRCI_CKEN) -#define MB86R0x_DDR2_DRCI_NORMAL MB86R0x_DDR2_DRCI_CKEN -#endif /* MB86R0X_H */ diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h deleted file mode 100644 index 1eed7b1d56..0000000000 --- a/arch/arm/include/asm/arch-pantheon/config.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_CONFIG_H -#define _PANTHEON_CONFIG_H - -#include <asm/arch/pantheon.h> - -/* default Dcache Line length for pantheon */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ -#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ -#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ -#define MV_MFPR_BASE PANTHEON_MFPR_BASE -#define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE -#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register - represents UART Unit Enable */ -/* - * I2C definition - */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0xd4011000 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 0 -#define CONFIG_SYS_I2C_SLAVE 0xfe -#endif - -/* - * MMC definition - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_CMD_FAT 1 -#define CONFIG_MMC 1 -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_SDHCI 1 -#define CONFIG_MMC_SDHCI_IO_ACCESSORS 1 -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000 -#define CONFIG_MMC_SDMA 1 -#define CONFIG_MV_SDHCI 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_EFI_PARTITION 1 -#define CONFIG_SYS_MMC_NUM 2 -#define CONFIG_SYS_MMC_BASE {0xD4280000, 0xd4281000} -#endif - -#endif /* _PANTHEON_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h deleted file mode 100644 index 3ccdf8a359..0000000000 --- a/arch/arm/include/asm/arch-pantheon/cpu.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_CPU_H -#define _PANTHEON_CPU_H - -#include <asm/io.h> -#include <asm/system.h> - -/* - * Main Power Management (MPMU) Registers - * Refer Register Datasheet 9.1 - */ -struct panthmpmu_registers { - u8 pad0[0x0024]; - u32 ccgr; /*0x0024*/ - u8 pad1[0x0200 - 0x024 - 4]; - u32 wdtpcr; /*0x0200*/ - u8 pad2[0x1020 - 0x200 - 4]; - u32 aprr; /*0x1020*/ - u32 acgr; /*0x1024*/ -}; - -/* - * Application Power Management (APMU) Registers - * Refer Register Datasheet 9.2 - */ -struct panthapmu_registers { - u8 pad0[0x0054]; - u32 sd1; /*0x0054*/ - u8 pad1[0x00e0 - 0x054 - 4]; - u32 sd3; /*0x00e0*/ -}; - -/* - * APB Clock Reset/Control Registers - * Refer Register Datasheet 6.14 - */ -struct panthapb_registers { - u32 uart0; /*0x000*/ - u32 uart1; /*0x004*/ - u32 gpio; /*0x008*/ - u8 pad0[0x02c - 0x08 - 4]; - u32 twsi; /*0x02c*/ - u8 pad1[0x034 - 0x2c - 4]; - u32 timers; /*0x034*/ -}; - -/* - * CPU Interface Registers - * Refer Register Datasheet 4.3 - */ -struct panthcpu_registers { - u32 chip_id; /* Chip Id Reg */ - u32 pad; - u32 cpu_conf; /* CPU Conf Reg */ - u32 pad1; - u32 cpu_sram_spd; /* CPU SRAM Speed Reg */ - u32 pad2; - u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */ - u32 mcb_conf; /* MCB Conf Reg */ - u32 sys_boot_ctl; /* Sytem Boot Control */ -}; - -/* - * Functions - */ -u32 panth_sdram_base(int); -u32 panth_sdram_size(int); -int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); - -#endif /* _PANTHEON_CPU_H */ diff --git a/arch/arm/include/asm/arch-pantheon/gpio.h b/arch/arm/include/asm/arch-pantheon/gpio.h deleted file mode 100644 index e69de29bb2..0000000000 --- a/arch/arm/include/asm/arch-pantheon/gpio.h +++ /dev/null diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h deleted file mode 100644 index 7909d53d46..0000000000 --- a/arch/arm/include/asm/arch-pantheon/mfp.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Based on arch/arm/include/asm/arch-armada100/mfp.h - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PANTHEON_MFP_H -#define __PANTHEON_MFP_H - -/* - * Frequently used MFP Configuration macros for all PANTHEON family of SoCs - * - * offset, pull,pF, drv,dF, edge,eF ,afn,aF - */ -/* UART2 */ -#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) -#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) -#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) - -/* More macros can be defined here... */ -#define MFP_MMC1_DAT7 (MFP_REG(0x84) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT6 (MFP_REG(0x88) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT5 (MFP_REG(0x8c) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT4 (MFP_REG(0x90) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_DAT3 (MFP_REG(0x94) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT2 (MFP_REG(0x98) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT1 (MFP_REG(0x9c) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_DAT0 (MFP_REG(0xa0) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CMD (MFP_REG(0xa4) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CLK (MFP_REG(0xa8) | MFP_AF0 | MFP_DRIVE_FAST) -#define MFP_MMC1_CD (MFP_REG(0xac) | MFP_AF0 | MFP_DRIVE_MEDIUM) -#define MFP_MMC1_WP (MFP_REG(0xb0) | MFP_AF0 | MFP_DRIVE_MEDIUM) - -#define MFP_PIN_MAX 117 -#endif diff --git a/arch/arm/include/asm/arch-pantheon/pantheon.h b/arch/arm/include/asm/arch-pantheon/pantheon.h deleted file mode 100644 index c3a71bfce4..0000000000 --- a/arch/arm/include/asm/arch-pantheon/pantheon.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PANTHEON_H -#define _PANTHEON_H - -/* Common APB clock register bit definitions */ -#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ -#define APBC_FNCLK (1<<1) /* Functional Clock Enable */ -#define APBC_RST (1<<2) /* Reset Generation */ -/* Functional Clock Selection Mask */ -#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) - -/* Common APMU register bit definitions */ -#define APMU_PERI_CLK (1<<4) /* Peripheral Clock Enable */ -#define APMU_AXI_CLK (1<<3) /* AXI Clock Enable*/ -#define APMU_PERI_RST (1<<1) /* Peripheral Reset */ -#define APMU_AXI_RST (1<<0) /* AXI Reset */ - -/* Register Base Addresses */ -#define PANTHEON_DRAM_BASE 0xB0000000 -#define PANTHEON_TIMER_BASE 0xD4014000 -#define PANTHEON_WD_TIMER_BASE 0xD4080000 -#define PANTHEON_APBC_BASE 0xD4015000 -#define PANTHEON_UART1_BASE 0xD4017000 -#define PANTHEON_UART2_BASE 0xD4018000 -#define PANTHEON_GPIO_BASE 0xD4019000 -#define PANTHEON_MFPR_BASE 0xD401E000 -#define PANTHEON_MPMU_BASE 0xD4050000 -#define PANTHEON_APMU_BASE 0xD4282800 -#define PANTHEON_CPU_BASE 0xD4282C00 - -#endif /* _PANTHEON_H */ diff --git a/arch/arm/include/asm/arch-tnetv107x/clock.h b/arch/arm/include/asm/arch-tnetv107x/clock.h deleted file mode 100644 index dfc3b1bfa5..0000000000 --- a/arch/arm/include/asm/arch-tnetv107x/clock.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * TNETV107X: Clock APIs - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -#define PSC_MDCTL_NEXT_SWRSTDISABLE 0x0 -#define PSC_MDCTL_NEXT_SYNCRST 0x1 -#define PSC_MDCTL_NEXT_DISABLE 0x2 -#define PSC_MDCTL_NEXT_ENABLE 0x3 - -#define CONFIG_SYS_INT_OSC_FREQ 24000000 - -#ifndef __ASSEMBLY__ - -/* PLL identifiers */ -enum pll_type_e { - SYS_PLL, - TDM_PLL, - ETH_PLL -}; - -/* PLL configuration data */ -struct pll_init_data { - int pll; - int internal_osc; - unsigned long pll_freq; - unsigned long div_freq[10]; -}; - -void init_plls(int num_pll, struct pll_init_data *config); -int lpsc_status(unsigned int mod); -void lpsc_control(int mod, unsigned long state, int lrstz); -unsigned long clk_get_rate(unsigned int clk); -unsigned long clk_round_rate(unsigned int clk, unsigned long hz); -int clk_set_rate(unsigned int clk, unsigned long hz); - -static inline void clk_enable(unsigned int mod) -{ - lpsc_control(mod, PSC_MDCTL_NEXT_ENABLE, -1); -} - -static inline void clk_disable(unsigned int mod) -{ - lpsc_control(mod, PSC_MDCTL_NEXT_DISABLE, -1); -} - -#endif - -#endif diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h deleted file mode 100644 index d458e0bdf0..0000000000 --- a/arch/arm/include/asm/arch-tnetv107x/hardware.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * TNETV107X: Hardware information - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -#include <linux/sizes.h> - -#define ASYNC_EMIF_NUM_CS 4 -#define ASYNC_EMIF_MODE_NOR 0 -#define ASYNC_EMIF_MODE_NAND 1 -#define ASYNC_EMIF_MODE_ONENAND 2 -#define ASYNC_EMIF_PRESERVE -1 - -struct async_emif_config { - unsigned mode; - unsigned select_strobe; - unsigned extend_wait; - unsigned wr_setup; - unsigned wr_strobe; - unsigned wr_hold; - unsigned rd_setup; - unsigned rd_strobe; - unsigned rd_hold; - unsigned turn_around; - enum { - ASYNC_EMIF_8 = 0, - ASYNC_EMIF_16 = 1, - ASYNC_EMIF_32 = 2, - } width; -}; - -void init_async_emif(int num_cs, struct async_emif_config *config); - -int wdt_start(unsigned long msecs); -int wdt_stop(void); -int wdt_kick(void); - -#endif - -/* Chip configuration unlock codes and registers */ -#define TNETV107X_KICK0 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x38) -#define TNETV107X_KICK1 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x3c) -#define TNETV107X_PINMUX(n) (TNETV107X_CHIP_CONFIG_SYS_BASE+0x150+(n)*4) -#define TNETV107X_KICK0_MAGIC 0x83e70b13 -#define TNETV107X_KICK1_MAGIC 0x95a4f1e0 - -/* Module base addresses */ -#define TNETV107X_TPCC_BASE 0x01C00000 -#define TNETV107X_TPTC0_BASE 0x01C10000 -#define TNETV107X_TPTC1_BASE 0x01C10400 -#define TNETV107X_INTC_BASE 0x03000000 -#define TNETV107X_LCD_CONTROLLER_BASE 0x08030000 -#define TNETV107X_INTD_BASE 0x08038000 -#define TNETV107X_INTD_IPC_BASE 0x08038000 -#define TNETV107X_INTD_FAST_BASE 0x08039000 -#define TNETV107X_INTD_ASYNC_BASE 0x0803A000 -#define TNETV107X_INTD_SLOW_BASE 0x0803B000 -#define TNETV107X_PKA_BASE 0x08040000 -#define TNETV107X_RNG_BASE 0x08044000 -#define TNETV107X_TIMER0_BASE 0x08086500 -#define TNETV107X_TIMER1_BASE 0x08086600 -#define TNETV107X_WDT0_ARM_BASE 0x08086700 -#define TNETV107X_WDT1_DSP_BASE 0x08086800 -#define TNETV107X_CHIP_CONFIG_SYS_BASE 0x08087000 -#define TNETV107X_GPIO_BASE 0x08088000 -#define TNETV107X_UART1_BASE 0x08088400 -#define TNETV107X_TOUCHSCREEN_BASE 0x08088500 -#define TNETV107X_SDIO0_BASE 0x08088700 -#define TNETV107X_SDIO1_BASE 0x08088800 -#define TNETV107X_MDIO_BASE 0x08088900 -#define TNETV107X_KEYPAD_BASE 0x08088A00 -#define TNETV107X_SSP_BASE 0x08088C00 -#define TNETV107X_CLOCK_CONTROL_BASE 0x0808A000 -#define TNETV107X_PSC_BASE 0x0808B000 -#define TNETV107X_TDM0_BASE 0x08100000 -#define TNETV107X_TDM1_BASE 0x08100100 -#define TNETV107X_MCDMA_BASE 0x08108000 -#define TNETV107X_UART0_DMA_BASE 0x08108200 -#define TNETV107X_USBSS_BASE 0x08120000 -#define TNETV107X_VLYNQ_CONTROL_BASE 0x0810D000 -#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 -#define TNETV107X_VLYNQ_MEM_MAP_BASE 0x0C000000 -#define TNETV107X_IMCOP_BASE 0x01CC0000 -#define TNETV107X_MBX_LITE_BASE 0x07000000 -#define TNETV107X_ETHSS_BASE 0x0803C000 -#define TNETV107X_CPSW_BASE 0x0803C000 -#define TNETV107X_SPF_BASE 0x0803C800 -#define TNETV107X_IOPU_ETHSS_BASE 0x0803D000 -#define TNETV107X_VTP_CNTRL_0 0x0803D800 -#define TNETV107X_VTP_CNTRL_1 0x0803D900 -#define TNETV107X_UART2_DMA_BASE 0x08108400 -#define TNETV107X_INTERNAL_MEMORY 0x20000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000 -#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 -#define TNETV107X_DDR_EMIF_DATA_BASE 0x80000000 -#define TNETV107X_DDR_EMIF_CONTROL_BASE 0x90000000 - -/* LPSC module definitions */ -#define TNETV107X_LPSC_ARM 0 -#define TNETV107X_LPSC_GEM 1 -#define TNETV107X_LPSC_DDR2_PHY 2 -#define TNETV107X_LPSC_TPCC 3 -#define TNETV107X_LPSC_TPTC0 4 -#define TNETV107X_LPSC_TPTC1 5 -#define TNETV107X_LPSC_RAM 6 -#define TNETV107X_LPSC_MBX_LITE 7 -#define TNETV107X_LPSC_LCD 8 -#define TNETV107X_LPSC_ETHSS 9 -#define TNETV107X_LPSC_AEMIF 10 -#define TNETV107X_LPSC_CHIP_CFG 11 -#define TNETV107X_LPSC_TSC 12 -#define TNETV107X_LPSC_ROM 13 -#define TNETV107X_LPSC_UART2 14 -#define TNETV107X_LPSC_PKTSEC 15 -#define TNETV107X_LPSC_SECCTL 16 -#define TNETV107X_LPSC_KEYMGR 17 -#define TNETV107X_LPSC_KEYPAD 18 -#define TNETV107X_LPSC_GPIO 19 -#define TNETV107X_LPSC_MDIO 20 -#define TNETV107X_LPSC_SDIO0 21 -#define TNETV107X_LPSC_UART0 22 -#define TNETV107X_LPSC_UART1 23 -#define TNETV107X_LPSC_TIMER0 24 -#define TNETV107X_LPSC_TIMER1 25 -#define TNETV107X_LPSC_WDT_ARM 26 -#define TNETV107X_LPSC_WDT_DSP 27 -#define TNETV107X_LPSC_SSP 28 -#define TNETV107X_LPSC_TDM0 29 -#define TNETV107X_LPSC_VLYNQ 30 -#define TNETV107X_LPSC_MCDMA 31 -#define TNETV107X_LPSC_USB0 32 -#define TNETV107X_LPSC_TDM1 33 -#define TNETV107X_LPSC_DEBUGSS 34 -#define TNETV107X_LPSC_ETHSS_RGMII 35 -#define TNETV107X_LPSC_SYSTEM 36 -#define TNETV107X_LPSC_IMCOP 37 -#define TNETV107X_LPSC_SPARE 38 -#define TNETV107X_LPSC_SDIO1 39 -#define TNETV107X_LPSC_USB1 40 -#define TNETV107X_LPSC_USBSS 41 -#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42 -#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43 -#define TNETV107X_LPSC_MAX 44 - -/* Interrupt controller */ -#define INTC_GLB_EN (TNETV107X_INTC_BASE + 0x10) -#define INTC_HINT_EN (TNETV107X_INTC_BASE + 0x1500) -#define INTC_EN_CLR0 (TNETV107X_INTC_BASE + 0x380) - -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-tnetv107x/mux.h b/arch/arm/include/asm/arch-tnetv107x/mux.h deleted file mode 100644 index 3f832c4147..0000000000 --- a/arch/arm/include/asm/arch-tnetv107x/mux.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * TNETV107X: Pinmux APIs - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -struct pin_config { - unsigned char reg_index; - unsigned char mask_offset; - unsigned char mode; -}; - -#define TNETV107X_MUX_CFG(reg, offset, mux_mode) \ - { reg, offset, mux_mode } - -int mux_select_pin(short index); -int mux_select_pins(const short *pins); - -enum tnetv107x_pin_mux_index { - TNETV107X_PIN_ASR_A00, - TNETV107X_PIN_GPIO32, - TNETV107X_PIN_ASR_A01, - TNETV107X_PIN_GPIO33, - TNETV107X_PIN_ASR_A02, - TNETV107X_PIN_GPIO34, - TNETV107X_PIN_ASR_A03, - TNETV107X_PIN_GPIO35, - TNETV107X_PIN_ASR_A04, - TNETV107X_PIN_GPIO36, - TNETV107X_PIN_ASR_A05, - TNETV107X_PIN_GPIO37, - TNETV107X_PIN_ASR_A06, - TNETV107X_PIN_GPIO38, - TNETV107X_PIN_ASR_A07, - TNETV107X_PIN_GPIO39, - TNETV107X_PIN_ASR_A08, - TNETV107X_PIN_GPIO40, - TNETV107X_PIN_ASR_A09, - TNETV107X_PIN_GPIO41, - TNETV107X_PIN_ASR_A10, - TNETV107X_PIN_GPIO42, - TNETV107X_PIN_ASR_A11, - TNETV107X_PIN_BOOT_STRP_0, - TNETV107X_PIN_ASR_A12, - TNETV107X_PIN_BOOT_STRP_1, - TNETV107X_PIN_ASR_A13, - TNETV107X_PIN_GPIO43, - TNETV107X_PIN_ASR_A14, - TNETV107X_PIN_GPIO44, - TNETV107X_PIN_ASR_A15, - TNETV107X_PIN_GPIO45, - TNETV107X_PIN_ASR_A16, - TNETV107X_PIN_GPIO46, - TNETV107X_PIN_ASR_A17, - TNETV107X_PIN_GPIO47, - TNETV107X_PIN_ASR_A18, - TNETV107X_PIN_GPIO48, - TNETV107X_PIN_SDIO1_DATA3_0, - TNETV107X_PIN_ASR_A19, - TNETV107X_PIN_GPIO49, - TNETV107X_PIN_SDIO1_DATA2_0, - TNETV107X_PIN_ASR_A20, - TNETV107X_PIN_GPIO50, - TNETV107X_PIN_SDIO1_DATA1_0, - TNETV107X_PIN_ASR_A21, - TNETV107X_PIN_GPIO51, - TNETV107X_PIN_SDIO1_DATA0_0, - TNETV107X_PIN_ASR_A22, - TNETV107X_PIN_GPIO52, - TNETV107X_PIN_SDIO1_CMD_0, - TNETV107X_PIN_ASR_A23, - TNETV107X_PIN_GPIO53, - TNETV107X_PIN_SDIO1_CLK_0, - TNETV107X_PIN_ASR_BA_1, - TNETV107X_PIN_GPIO54, - TNETV107X_PIN_SYS_PLL_CLK, - TNETV107X_PIN_ASR_CS0, - TNETV107X_PIN_ASR_CS1, - TNETV107X_PIN_ASR_CS2, - TNETV107X_PIN_TDM_PLL_CLK, - TNETV107X_PIN_ASR_CS3, - TNETV107X_PIN_ETH_PHY_CLK, - TNETV107X_PIN_ASR_D00, - TNETV107X_PIN_GPIO55, - TNETV107X_PIN_ASR_D01, - TNETV107X_PIN_GPIO56, - TNETV107X_PIN_ASR_D02, - TNETV107X_PIN_GPIO57, - TNETV107X_PIN_ASR_D03, - TNETV107X_PIN_GPIO58, - TNETV107X_PIN_ASR_D04, - TNETV107X_PIN_GPIO59_0, - TNETV107X_PIN_ASR_D05, - TNETV107X_PIN_GPIO60_0, - TNETV107X_PIN_ASR_D06, - TNETV107X_PIN_GPIO61_0, - TNETV107X_PIN_ASR_D07, - TNETV107X_PIN_GPIO62_0, - TNETV107X_PIN_ASR_D08, - TNETV107X_PIN_GPIO63_0, - TNETV107X_PIN_ASR_D09, - TNETV107X_PIN_GPIO64_0, - TNETV107X_PIN_ASR_D10, - TNETV107X_PIN_SDIO1_DATA3_1, - TNETV107X_PIN_ASR_D11, - TNETV107X_PIN_SDIO1_DATA2_1, - TNETV107X_PIN_ASR_D12, - TNETV107X_PIN_SDIO1_DATA1_1, - TNETV107X_PIN_ASR_D13, - TNETV107X_PIN_SDIO1_DATA0_1, - TNETV107X_PIN_ASR_D14, - TNETV107X_PIN_SDIO1_CMD_1, - TNETV107X_PIN_ASR_D15, - TNETV107X_PIN_SDIO1_CLK_1, - TNETV107X_PIN_ASR_OE, - TNETV107X_PIN_BOOT_STRP_2, - TNETV107X_PIN_ASR_RNW, - TNETV107X_PIN_GPIO29_0, - TNETV107X_PIN_ASR_WAIT, - TNETV107X_PIN_GPIO30_0, - TNETV107X_PIN_ASR_WE, - TNETV107X_PIN_BOOT_STRP_3, - TNETV107X_PIN_ASR_WE_DQM0, - TNETV107X_PIN_GPIO31, - TNETV107X_PIN_LCD_PD17_0, - TNETV107X_PIN_ASR_WE_DQM1, - TNETV107X_PIN_ASR_BA0_0, - TNETV107X_PIN_VLYNQ_CLK, - TNETV107X_PIN_GPIO14, - TNETV107X_PIN_LCD_PD19_0, - TNETV107X_PIN_VLYNQ_RXD0, - TNETV107X_PIN_GPIO15, - TNETV107X_PIN_LCD_PD20_0, - TNETV107X_PIN_VLYNQ_RXD1, - TNETV107X_PIN_GPIO16, - TNETV107X_PIN_LCD_PD21_0, - TNETV107X_PIN_VLYNQ_TXD0, - TNETV107X_PIN_GPIO17, - TNETV107X_PIN_LCD_PD22_0, - TNETV107X_PIN_VLYNQ_TXD1, - TNETV107X_PIN_GPIO18, - TNETV107X_PIN_LCD_PD23_0, - TNETV107X_PIN_SDIO0_CLK, - TNETV107X_PIN_GPIO19, - TNETV107X_PIN_SDIO0_CMD, - TNETV107X_PIN_GPIO20, - TNETV107X_PIN_SDIO0_DATA0, - TNETV107X_PIN_GPIO21, - TNETV107X_PIN_SDIO0_DATA1, - TNETV107X_PIN_GPIO22, - TNETV107X_PIN_SDIO0_DATA2, - TNETV107X_PIN_GPIO23, - TNETV107X_PIN_SDIO0_DATA3, - TNETV107X_PIN_GPIO24, - TNETV107X_PIN_EMU0, - TNETV107X_PIN_EMU1, - TNETV107X_PIN_RTCK, - TNETV107X_PIN_TRST_N, - TNETV107X_PIN_TCK, - TNETV107X_PIN_TDI, - TNETV107X_PIN_TDO, - TNETV107X_PIN_TMS, - TNETV107X_PIN_TDM1_CLK, - TNETV107X_PIN_TDM1_RX, - TNETV107X_PIN_TDM1_TX, - TNETV107X_PIN_TDM1_FS, - TNETV107X_PIN_KEYPAD_R0, - TNETV107X_PIN_KEYPAD_R1, - TNETV107X_PIN_KEYPAD_R2, - TNETV107X_PIN_KEYPAD_R3, - TNETV107X_PIN_KEYPAD_R4, - TNETV107X_PIN_KEYPAD_R5, - TNETV107X_PIN_KEYPAD_R6, - TNETV107X_PIN_GPIO12, - TNETV107X_PIN_KEYPAD_R7, - TNETV107X_PIN_GPIO10, - TNETV107X_PIN_KEYPAD_C0, - TNETV107X_PIN_KEYPAD_C1, - TNETV107X_PIN_KEYPAD_C2, - TNETV107X_PIN_KEYPAD_C3, - TNETV107X_PIN_KEYPAD_C4, - TNETV107X_PIN_KEYPAD_C5, - TNETV107X_PIN_KEYPAD_C6, - TNETV107X_PIN_GPIO13, - TNETV107X_PIN_TEST_CLK_IN, - TNETV107X_PIN_KEYPAD_C7, - TNETV107X_PIN_GPIO11, - TNETV107X_PIN_SSP0_0, - TNETV107X_PIN_SCC_DCLK, - TNETV107X_PIN_LCD_PD20_1, - TNETV107X_PIN_SSP0_1, - TNETV107X_PIN_SCC_CS_N, - TNETV107X_PIN_LCD_PD21_1, - TNETV107X_PIN_SSP0_2, - TNETV107X_PIN_SCC_D, - TNETV107X_PIN_LCD_PD22_1, - TNETV107X_PIN_SSP0_3, - TNETV107X_PIN_SCC_RESETN, - TNETV107X_PIN_LCD_PD23_1, - TNETV107X_PIN_SSP1_0, - TNETV107X_PIN_GPIO25, - TNETV107X_PIN_UART2_CTS, - TNETV107X_PIN_SSP1_1, - TNETV107X_PIN_GPIO26, - TNETV107X_PIN_UART2_RD, - TNETV107X_PIN_SSP1_2, - TNETV107X_PIN_GPIO27, - TNETV107X_PIN_UART2_RTS, - TNETV107X_PIN_SSP1_3, - TNETV107X_PIN_GPIO28, - TNETV107X_PIN_UART2_TD, - TNETV107X_PIN_UART0_CTS, - TNETV107X_PIN_UART0_RD, - TNETV107X_PIN_UART0_RTS, - TNETV107X_PIN_UART0_TD, - TNETV107X_PIN_UART1_RD, - TNETV107X_PIN_UART1_TD, - TNETV107X_PIN_LCD_AC_NCS, - TNETV107X_PIN_LCD_HSYNC_RNW, - TNETV107X_PIN_LCD_VSYNC_A0, - TNETV107X_PIN_LCD_MCLK, - TNETV107X_PIN_LCD_PD16_0, - TNETV107X_PIN_LCD_PCLK_E, - TNETV107X_PIN_LCD_PD00, - TNETV107X_PIN_LCD_PD01, - TNETV107X_PIN_LCD_PD02, - TNETV107X_PIN_LCD_PD03, - TNETV107X_PIN_LCD_PD04, - TNETV107X_PIN_LCD_PD05, - TNETV107X_PIN_LCD_PD06, - TNETV107X_PIN_LCD_PD07, - TNETV107X_PIN_LCD_PD08, - TNETV107X_PIN_GPIO59_1, - TNETV107X_PIN_LCD_PD09, - TNETV107X_PIN_GPIO60_1, - TNETV107X_PIN_LCD_PD10, - TNETV107X_PIN_ASR_BA0_1, - TNETV107X_PIN_GPIO61_1, - TNETV107X_PIN_LCD_PD11, - TNETV107X_PIN_GPIO62_1, - TNETV107X_PIN_LCD_PD12, - TNETV107X_PIN_GPIO63_1, - TNETV107X_PIN_LCD_PD13, - TNETV107X_PIN_GPIO64_1, - TNETV107X_PIN_LCD_PD14, - TNETV107X_PIN_GPIO29_1, - TNETV107X_PIN_LCD_PD15, - TNETV107X_PIN_GPIO30_1, - TNETV107X_PIN_EINT0, - TNETV107X_PIN_GPIO08, - TNETV107X_PIN_EINT1, - TNETV107X_PIN_GPIO09, - TNETV107X_PIN_GPIO00, - TNETV107X_PIN_LCD_PD20_2, - TNETV107X_PIN_TDM_CLK_IN_2, - TNETV107X_PIN_GPIO01, - TNETV107X_PIN_LCD_PD21_2, - TNETV107X_PIN_24M_CLK_OUT_1, - TNETV107X_PIN_GPIO02, - TNETV107X_PIN_LCD_PD22_2, - TNETV107X_PIN_GPIO03, - TNETV107X_PIN_LCD_PD23_2, - TNETV107X_PIN_GPIO04, - TNETV107X_PIN_LCD_PD16_1, - TNETV107X_PIN_USB0_RXERR, - TNETV107X_PIN_GPIO05, - TNETV107X_PIN_LCD_PD17_1, - TNETV107X_PIN_TDM_CLK_IN_1, - TNETV107X_PIN_GPIO06, - TNETV107X_PIN_LCD_PD18, - TNETV107X_PIN_24M_CLK_OUT_2, - TNETV107X_PIN_GPIO07, - TNETV107X_PIN_LCD_PD19_1, - TNETV107X_PIN_USB1_RXERR, - TNETV107X_PIN_ETH_PLL_CLK, - TNETV107X_PIN_MDIO, - TNETV107X_PIN_MDC, - TNETV107X_PIN_AIC_MUTE_STAT_N, - TNETV107X_PIN_TDM0_CLK, - TNETV107X_PIN_AIC_HNS_EN_N, - TNETV107X_PIN_TDM0_FS, - TNETV107X_PIN_AIC_HDS_EN_STAT_N, - TNETV107X_PIN_TDM0_TX, - TNETV107X_PIN_AIC_HNF_EN_STAT_N, - TNETV107X_PIN_TDM0_RX, -}; - -#endif diff --git a/arch/arm/lib/asm-offsets.c b/arch/arm/lib/asm-offsets.c index b0c26e5d68..e5bcaea1ae 100644 --- a/arch/arm/lib/asm-offsets.c +++ b/arch/arm/lib/asm-offsets.c @@ -15,9 +15,6 @@ #include <common.h> #include <linux/kbuild.h> -#if defined(CONFIG_MB86R0x) -#include <asm/arch/mb86r0x.h> -#endif #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \ || defined(CONFIG_MX51) || defined(CONFIG_MX53) #include <asm/arch/imx-regs.h> @@ -27,8 +24,6 @@ int main(void) { /* * TODO : Check if each entry in this file is really necessary. - * - struct mb86r0x_ddr2 - * - struct mb86r0x_memc * - struct esdramc_regs * - struct max_regs * - struct aips_regs @@ -40,47 +35,6 @@ int main(void) * code. Is it better to define the macros directly in headers? */ -#if defined(CONFIG_MB86R0x) - /* ddr2 controller */ - DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric)); - DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1)); - DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2)); - DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca)); - DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm)); - DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1)); - DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2)); - DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr)); - DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf)); - DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr)); - DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims)); - DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros)); - DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1)); - DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba)); - DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs)); - - /* clock reset generator */ - DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr)); - DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha)); - DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa)); - DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb)); - DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb)); - DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram)); - - /* chip control module */ - DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc)); - - /* external bus interface */ - DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0])); - DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2])); - DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4])); - DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0])); - DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2])); - DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4])); - DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0])); - DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2])); - DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4])); -#endif - #if defined(CONFIG_MX25) /* Clock Control Module */ DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl)); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 613f04d8b0..68277217bf 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -21,10 +21,6 @@ config TARGET_CAM_ENC_4XX bool "CAM ENC 4xx board" select SUPPORT_SPL -config TARGET_HAWKBOARD - bool "Hawkboard" - select SUPPORT_SPL - config TARGET_DAVINCI_DM355EVM bool "DM355 EVM board" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 3a8e2b19d6..8615248377 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -24,25 +24,25 @@ config SYS_MALLOC_F_LEN default 0x1800 config USE_PRIVATE_LIBGCC - default y if SPL_BUILD + default y config DM - default y if !SPL_BUILD + default y config DM_SERIAL - default y if !SPL_BUILD + default y config DM_SPI - default y if !SPL_BUILD + default y config DM_SPI_FLASH - default y if !SPL_BUILD + default y config DM_I2C - default y if !SPL_BUILD + default y config DM_GPIO - default y if !SPL_BUILD + default y source "arch/arm/mach-tegra/tegra20/Kconfig" source "arch/arm/mach-tegra/tegra30/Kconfig" |
