summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/zynq/cpu.c26
-rw-r--r--arch/arm/include/asm/arch-zynq/hardware.h46
2 files changed, 70 insertions, 2 deletions
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 91618d3d8a..e8f4c19d49 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -21,9 +21,33 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
-inline void lowlevel_init(void) {}
+void lowlevel_init(void)
+{
+ zynq_slcr_unlock();
+ /* remap DDR to zero, FILTERSTART */
+ writel(0, &scu_base->filter_start);
+
+ /* Device config APB, unlock the PCAP */
+ writel(0x757BDF0D, &devcfg_base->unlock);
+ writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+ /* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+ writel(0x1F, &slcr_base->ocm_cfg);
+ /* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+ /* TZ_DDR_RAM, Set DDR trust zone non-secure */
+ writel(0xFFFFFFFF, &slcr_base->trust_zone);
+ /* Set urgent bits with register */
+ writel(0x0, &slcr_base->ddr_urgent_sel);
+ /* Urgent write, ports S2/S3 */
+ writel(0xC, &slcr_base->ddr_urgent);
+
+ zynq_slcr_lock();
+}
void reset_cpu(ulong addr)
{
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index ad17b272d0..d0c69da971 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -24,6 +24,8 @@
#define _ASM_ARCH_HARDWARE_H
#define XPSS_SYS_CTRL_BASEADDR 0xF8000000
+#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000
+#define XPSS_SCU_BASEADDR 0xF8F00000
/* Reflect slcr offsets */
struct slcr_regs {
@@ -32,10 +34,52 @@ struct slcr_regs {
u32 slcr_unlock; /* 0x8 */
u32 reserved1[125];
u32 pss_rst_ctrl; /* 0x200 */
- u32 reserved2[21];
+ u32 reserved2[15];
+ u32 fpga_rst_ctrl; /* 0x240 */
+ u32 reserved3[5];
u32 reboot_status; /* 0x258 */
+ u32 boot_mode; /* 0x25c */
+ u32 reserved4[116];
+ u32 trust_zone; /* 0x430 */ /* FIXME */
+ u32 reserved5[115];
+ u32 ddr_urgent; /* 0x600 */
+ u32 reserved6[6];
+ u32 ddr_urgent_sel; /* 0x61c */
+ u32 reserved7[188];
+ u32 ocm_cfg; /* 0x910 */
};
#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR)
+struct devcfg_regs {
+ u32 ctrl; /* 0x0 */
+ u32 lock; /* 0x4 */
+ u32 cfg; /* 0x8 */
+ u32 int_sts; /* 0xc */
+ u32 int_mask; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 dma_src_addr; /* 0x18 */
+ u32 dma_dst_addr; /* 0x1c */
+ u32 dma_src_len; /* 0x20 */
+ u32 dma_dst_len; /* 0x24 */
+ u32 rom_shadow; /* 0x28 */
+ u32 reserved1[2];
+ u32 unlock; /* 0x34 */
+ u32 reserved2[18];
+ u32 mctrl; /* 0x80 */
+ u32 reserved3;
+ u32 write_count; /* 0x88 */
+ u32 read_count; /* 0x8c */
+};
+
+#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR)
+
+struct scu_regs {
+ u32 reserved1[16];
+ u32 filter_start; /* 0x40 */
+ u32 filter_end; /* 0x44 */
+};
+
+#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR)
+
#endif /* _ASM_ARCH_HARDWARE_H */
OpenPOWER on IntegriCloud