summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-uniphier/support_card.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-uniphier/support_card.c')
-rw-r--r--arch/arm/mach-uniphier/support_card.c228
1 files changed, 0 insertions, 228 deletions
diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c
deleted file mode 100644
index f833306030..0000000000
--- a/arch/arm/mach-uniphier/support_card.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-#include <linux/io.h>
-#include <mach/micro-support-card.h>
-
-#define MICRO_SUPPORT_CARD_RESET \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034)
-#define MICRO_SUPPORT_CARD_REVISION \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0)
-/*
- * 0: reset deassert, 1: reset
- *
- * bit[0]: LAN, I2C, LED
- * bit[1]: UART
- */
-void support_card_reset_deassert(void)
-{
- writel(0, MICRO_SUPPORT_CARD_RESET);
-}
-
-void support_card_reset(void)
-{
- writel(3, MICRO_SUPPORT_CARD_RESET);
-}
-
-static int support_card_show_revision(void)
-{
- u32 revision;
-
- revision = readl(MICRO_SUPPORT_CARD_REVISION);
- printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
- return 0;
-}
-
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
-void support_card_init(void)
-{
- /*
- * After power on, we need to keep the LAN controller in reset state
- * for a while. (200 usec)
- * Fortunately, enough wait time is already inserted in pll_init()
- * function. So we do not have to wait here.
- */
- support_card_reset_deassert();
-}
-
-#if defined(CONFIG_SMC911X)
-#include <netdev.h>
-
-int board_eth_init(bd_t *bis)
-{
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-}
-#endif
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-
-#include <mtd/cfi_flash.h>
-#include <mach/sbc-regs.h>
-
-struct memory_bank {
- phys_addr_t base;
- unsigned long size;
-};
-
-static int mem_is_flash(const struct memory_bank *mem)
-{
- const int loop = 128;
- u32 *scratch_addr;
- u32 saved_value;
- int ret = 1;
- int i;
-
- /* just in case, use the tail of the memory bank */
- scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
- sizeof(u32) * loop, MAP_NOCACHE);
-
- for (i = 0; i < loop; i++, scratch_addr++) {
- saved_value = readl(scratch_addr);
- writel(~saved_value, scratch_addr);
- if (readl(scratch_addr) != saved_value) {
- /* We assume no memory or SRAM here. */
- writel(saved_value, scratch_addr);
- ret = 0;
- break;
- }
- }
-
- unmap_physmem(scratch_addr, MAP_NOCACHE);
-
- return ret;
-}
-
-/* {address, size} */
-static const struct memory_bank memory_banks[] = {
- {0x42000000, 0x01f00000},
-};
-
-static const struct memory_bank
-*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
-
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i]->base;
-}
-
-unsigned long cfi_flash_bank_size(int i)
-{
- return flash_banks_list[i]->size;
-}
-
-static void detect_num_flash_banks(void)
-{
- const struct memory_bank *memory_bank, *end;
-
- cfi_flash_num_flash_banks = 0;
-
- memory_bank = memory_banks;
- end = memory_bank + ARRAY_SIZE(memory_banks);
-
- for (; memory_bank < end; memory_bank++) {
- if (cfi_flash_num_flash_banks >=
- CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
- break;
-
- if (mem_is_flash(memory_bank)) {
- flash_banks_list[cfi_flash_num_flash_banks] =
- memory_bank;
-
- debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
- memory_bank->base, memory_bank->size);
- cfi_flash_num_flash_banks++;
- }
- }
-
- debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
-}
-#else /* CONFIG_SYS_NO_FLASH */
-void detect_num_flash_banks(void)
-{
-};
-#endif /* CONFIG_SYS_NO_FLASH */
-
-void support_card_late_init(void)
-{
- detect_num_flash_banks();
-}
-
-static const u8 ledval_num[] = {
- 0x7e, /* 0 */
- 0x0c, /* 1 */
- 0xb6, /* 2 */
- 0x9e, /* 3 */
- 0xcc, /* 4 */
- 0xda, /* 5 */
- 0xfa, /* 6 */
- 0x4e, /* 7 */
- 0xfe, /* 8 */
- 0xde, /* 9 */
-};
-
-static const u8 ledval_alpha[] = {
- 0xee, /* A */
- 0xf8, /* B */
- 0x72, /* C */
- 0xbc, /* D */
- 0xf2, /* E */
- 0xe2, /* F */
- 0x7a, /* G */
- 0xe8, /* H */
- 0x08, /* I */
- 0x3c, /* J */
- 0xea, /* K */
- 0x70, /* L */
- 0x6e, /* M */
- 0xa8, /* N */
- 0xb8, /* O */
- 0xe6, /* P */
- 0xce, /* Q */
- 0xa0, /* R */
- 0xc8, /* S */
- 0x8c, /* T */
- 0x7c, /* U */
- 0x54, /* V */
- 0xfc, /* W */
- 0xec, /* X */
- 0xdc, /* Y */
- 0xa4, /* Z */
-};
-
-static u8 char2ledval(char c)
-{
- if (isdigit(c))
- return ledval_num[c - '0'];
- else if (isalpha(c))
- return ledval_alpha[toupper(c) - 'A'];
-
- return 0;
-}
-
-void led_puts(const char *s)
-{
- int i;
- u32 val = 0;
-
- if (!s)
- return;
-
- for (i = 0; i < 4; i++) {
- val <<= 8;
- val |= char2ledval(*s);
- if (*s != '\0')
- s++;
- }
-
- writel(~val, CONFIG_SUPPORT_CARD_LED_BASE);
-}
OpenPOWER on IntegriCloud