diff options
Diffstat (limited to 'arch/arm/mach-uniphier/pll')
| -rw-r--r-- | arch/arm/mach-uniphier/pll/Makefile | 8 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c | 203 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c | 163 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c | 204 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c | 20 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c | 21 |
7 files changed, 632 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile new file mode 100644 index 0000000000..d33f99e446 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \ + pll-spectrum-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \ + pll-spectrum-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c new file mode 100644 index 0000000000..a272a900e1 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#undef DPLL_SSC_RATE_1PER + +static int dpll_init(unsigned int dram_freq) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT (DPLLCTRL.bit[29:20]) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x000f0000; + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } + +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~SC_DPLLCTRL_SSC_RATE; +#else + tmp |= SC_DPLLCTRL_SSC_RATE; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); + + return 0; +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_ld4_pll_init(const struct uniphier_board_data *bd) +{ + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c new file mode 100644 index 0000000000..906c22f6c5 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#undef DPLL_SSC_RATE_1PER + +static int dpll_init(unsigned int dram_freq) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT ( DPLLCTRL.bit[29:20] ) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~(0x000f0000); + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } + + /* + * Set Moduration rate + * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) + */ +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~0x00008000; +#else + tmp |= 0x00008000; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); + + return 0; +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_pro4_pll_init(const struct uniphier_board_data *bd) +{ + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 1 usec in vpll_init() so 1 usec can be saved here. + */ + udelay(499); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c new file mode 100644 index 0000000000..6294a452c2 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/init.h> + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd) +{ + /* add pll init code here */ + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c new file mode 100644 index 0000000000..f249abeeda --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +static void dpll_init(void) +{ + u32 tmp; + /* + * Set DPLL SSC parameters for DPLLCTRL3 + * [23] DIVN_TEST 0x1 + * [22:16] DIVN 0x50 + * [10] FREFSEL_TEST 0x1 + * [9:8] FREFSEL 0x2 + * [4] ICPD_TEST 0x1 + * [3:0] ICPD 0xb + */ + tmp = readl(SC_DPLLCTRL3); + tmp &= ~0x00ff0717; + tmp |= 0x00d0061b; + writel(tmp, SC_DPLLCTRL3); + + /* + * Set DPLL SSC parameters for DPLLCTRL + * <-1%> <-2%> + * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) + * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x3ff07fff; +#ifdef CONFIG_DPLL_SSC_RATE_1PER + tmp |= 0x084018bf; +#else + tmp |= 0x084031a6; +#endif + writel(tmp, SC_DPLLCTRL); + + /* + * Set DPLL SSC parameters for DPLLCTRL2 + * [31:29] SSC_STEP 0 + * [27] SSC_REG_REF 1 + * [26:20] SSC_M 79 (0x4f) + * [19:0] SSC_K 964689 (0xeb851) + */ + tmp = readl(SC_DPLLCTRL2); + tmp &= ~0xefffffff; + tmp |= 0x0cfeb851; + writel(tmp, SC_DPLLCTRL2); +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_sld8_pll_init(const struct uniphier_board_data *bd) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c new file mode 100644 index 0000000000..cad0ed8cdd --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c new file mode 100644 index 0000000000..43dc973654 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); + + return 0; +} |
