summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-uniphier/ph1-ld4
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-uniphier/ph1-ld4')
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/Makefile16
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/bcu_init.c33
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/boot-mode.c1
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c42
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c70
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c1
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S29
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/pinctrl.c63
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/platdevice.c15
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/pll_init.c189
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c1
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/sbc_init.c50
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c50
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/sg_init.c19
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/umc_init.c171
15 files changed, 750 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile
new file mode 100644
index 0000000000..5ce3d8a520
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile
@@ -0,0 +1,16 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
+obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
+obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+else
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
+obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
+obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c
new file mode 100644
index 0000000000..837e0d1fcc
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/bcu-regs.h>
+
+#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
+
+void bcu_init(void)
+{
+ int shift;
+
+ writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */
+ writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */
+ writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */
+ writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */
+ writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */
+
+ /* Specify DDR channel */
+ shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4;
+ writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
+
+ shift -= 32;
+ writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */
+
+ shift -= 32;
+ writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c
new file mode 100644
index 0000000000..d359b56291
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c
@@ -0,0 +1 @@
+#include "../ph1-pro4/boot-mode.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c
new file mode 100644
index 0000000000..4ac5411562
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <mach/sc-regs.h>
+
+void clkrst_init(void)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ tmp = readl(SC_RSTCTRL);
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_RSTCTRL_NRST_ETHER;
+#endif
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ tmp |= SC_RSTCTRL_NRST_STDMAC;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_RSTCTRL_NRST_NAND;
+#endif
+ writel(tmp, SC_RSTCTRL);
+ readl(SC_RSTCTRL); /* dummy read */
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_CLKCTRL_CEN_ETHER;
+#endif
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_CLKCTRL_CEN_NAND;
+#endif
+ writel(tmp, SC_CLKCTRL);
+ readl(SC_CLKCTRL); /* dummy read */
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c
new file mode 100644
index 0000000000..a47e87a714
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach/ddrphy-regs.h>
+
+void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8253c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a82dbc0, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+ writel(0x00000800, &phy->mr3);
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c
new file mode 100644
index 0000000000..d7ef16b10a
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c
@@ -0,0 +1 @@
+#include "../ph1-pro4/early_clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S
new file mode 100644
index 0000000000..7928c5c87c
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S
@@ -0,0 +1,29 @@
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+#include <mach/sg-regs.h>
+
+#define UART_CLK 36864000
+#include <mach/debug-uart.S>
+
+ENTRY(setup_lowlevel_debug)
+ init_debug_uart r0, r1, r2
+
+ /* UART Port 0 */
+ set_pinsel 85, 1, r0, r1
+ set_pinsel 88, 1, r0, r1
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ mov pc, lr
+ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c
new file mode 100644
index 0000000000..15d81ebb3d
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/sg-regs.h>
+
+void pin_init(void)
+{
+ u32 tmp;
+
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_UNIPHIER_SERIAL
+ sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */
+ sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */
+
+ sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */
+ sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */
+
+ sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */
+ sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */
+
+ sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
+ sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
+#endif
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */
+ sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */
+ sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */
+ sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */
+ sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */
+ sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */
+ sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */
+ sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */
+ sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */
+ sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */
+ sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */
+ sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */
+ sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */
+ sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */
+ sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */
+ sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */
+ sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */
+#endif
+
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */
+ sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */
+ /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */
+ /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */
+#endif
+
+ tmp = readl(SG_IECTRL);
+ tmp |= 0x41;
+ writel(tmp, SG_IECTRL);
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/platdevice.c b/arch/arm/mach-uniphier/ph1-ld4/platdevice.c
new file mode 100644
index 0000000000..c0e62943be
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <mach/platdevice.h>
+
+#define UART_MASTER_CLK 36864000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/ph1-ld4/pll_init.c
new file mode 100644
index 0000000000..985e14f4a9
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/pll_init.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/sc-regs.h>
+#include <mach/sg-regs.h>
+
+#undef DPLL_SSC_RATE_1PER
+
+static void dpll_init(void)
+{
+ u32 tmp;
+
+ /*
+ * Set Frequency
+ * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
+ * to FOUT (DPLLCTRL.bit[29:20])
+ */
+ tmp = readl(SC_DPLLCTRL);
+ tmp &= ~0x000f0000;
+#if CONFIG_DDR_FREQ == 1600
+ tmp |= 0x000c0000;
+#elif CONFIG_DDR_FREQ == 1333
+ tmp |= 0x000d0000;
+#else
+# error "Unknown frequency"
+#endif
+
+#if defined(DPLL_SSC_RATE_1PER)
+ tmp &= ~SC_DPLLCTRL_SSC_RATE;
+#else
+ tmp |= SC_DPLLCTRL_SSC_RATE;
+#endif
+ writel(tmp, SC_DPLLCTRL);
+
+ tmp = readl(SC_DPLLCTRL2);
+ tmp |= SC_DPLLCTRL2_NRSTDS;
+ writel(tmp, SC_DPLLCTRL2);
+}
+
+static void upll_init(void)
+{
+ u32 tmp, clk_mode_upll, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
+ tmp = readl(SC_UPLLCTRL);
+ tmp &= ~0x18000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x0228f5c0;
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp &= ~0x07ffffff;
+ tmp |= 0x02328000;
+ }
+ }
+
+ writel(tmp, SC_UPLLCTRL);
+
+ /* set 1 to K_LD(UPLLCTRL.bit[27]) */
+ tmp |= 0x08000000;
+ writel(tmp, SC_UPLLCTRL);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* set 1 to SNRT(UPLLCTRL.bit[28]) */
+ tmp |= 0x10000000;
+ writel(tmp, SC_UPLLCTRL);
+}
+
+static void vpll_init(void)
+{
+ u32 tmp, clk_mode_axosel;
+
+ tmp = readl(SG_PINMON0);
+ clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
+
+ /* set 1 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= 0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+
+ /* Set 0 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp &= ~0x0000007f;
+ tmp |= 0x00000020;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
+ clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
+ /* AXO: 25MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x00066664;
+ writel(tmp, SC_VPLL27BCTRL3);
+ } else {
+ /* AXO: default 24.576MHz */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp &= ~0x000fffff;
+ tmp |= 0x000f5800;
+ writel(tmp, SC_VPLL27BCTRL3);
+ }
+
+ /* Set 1 to VPLA_K_LD and VPLB_K_LD */
+ tmp = readl(SC_VPLL27ACTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL3);
+ tmp = readl(SC_VPLL27BCTRL3);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL3);
+
+ /* wait 10 usec */
+ udelay(10);
+
+ /* Set 0 to VPLA_SNRST and VPLB_SNRST */
+ tmp = readl(SC_VPLL27ACTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27ACTRL2);
+ tmp = readl(SC_VPLL27BCTRL2);
+ tmp |= 0x10000000;
+ writel(tmp, SC_VPLL27BCTRL2);
+
+ /* set 0 to VPLA27WP and VPLA27WP */
+ tmp = readl(SC_VPLL27ACTRL);
+ tmp &= ~0x00000001;
+ writel(tmp, SC_VPLL27ACTRL);
+ tmp = readl(SC_VPLL27BCTRL);
+ tmp |= ~0x00000001;
+ writel(tmp, SC_VPLL27BCTRL);
+}
+
+void pll_init(void)
+{
+ dpll_init();
+ upll_init();
+ vpll_init();
+
+ /*
+ * Wait 500 usec until dpll get stable
+ * We wait 10 usec in upll_init() and vpll_init()
+ * so 20 usec can be saved here.
+ */
+ udelay(480);
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c
new file mode 100644
index 0000000000..837b2a891b
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c
@@ -0,0 +1 @@
+#include "../ph1-pro4/pll_spectrum.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
new file mode 100644
index 0000000000..00f84614f6
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+void sbc_init(void)
+{
+ u32 tmp;
+
+ /* system bus output enable */
+ tmp = readl(PC0CTRL);
+ tmp &= 0xfffffcff;
+ writel(tmp, PC0CTRL);
+
+ /*
+ * Only CS1 is connected to support card.
+ * BKSZ[1:0] should be set to "01".
+ */
+ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
+
+ if (boot_is_swapped()) {
+ /*
+ * Boot Swap On: boot from external NOR/SRAM
+ * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
+ *
+ * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank
+ * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
+ */
+ writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x00000000-0x01ffffff: mask ROM
+ * 0x02000000-0x03efffff: memory bank (31MB)
+ * 0x03f00000-0x03ffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
+ }
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
new file mode 100644
index 0000000000..374a8c0680
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+void sbc_init(void)
+{
+ u32 tmp;
+
+ /* system bus output enable */
+ tmp = readl(PC0CTRL);
+ tmp &= 0xfffffcff;
+ writel(tmp, PC0CTRL);
+
+ /* XECS1: sub/boot memory (boot swap = off/on) */
+ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
+
+ /* XECS0: boot/sub memory (boot swap = off/on) */
+ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
+ writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
+ writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
+ writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
+
+ /* XECS3: peripherals */
+ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
+ writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
+ writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
+ writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
+
+ /* base address regsiters */
+ writel(0x0000bc01, SBBASE0);
+ writel(0x0400bc01, SBBASE1);
+ writel(0x0800bf01, SBBASE3);
+
+ /* enable access to sub memory when boot swap is on */
+ if (boot_is_swapped())
+ sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
+
+ sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c
new file mode 100644
index 0000000000..93e44afd19
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <mach/sg-regs.h>
+
+void sg_init(void)
+{
+ u32 tmp;
+
+ /* Input ports must be enabled before deasserting reset of cores */
+ tmp = readl(SG_IECTRL);
+ tmp |= 0x1;
+ writel(tmp, SG_IECTRL);
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/ph1-ld4/umc_init.c
new file mode 100644
index 0000000000..081b028c0c
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-ld4/umc_init.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/umc-regs.h>
+#include <mach/ddrphy-regs.h>
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+ writel(0x00000000, ssif_base + 0x0000b004);
+ writel(0xffffffff, ssif_base + 0x0000c004);
+ writel(0x000fffcf, ssif_base + 0x0000c008);
+ writel(0x00000001, ssif_base + 0x0000b000);
+ writel(0x00000001, ssif_base + 0x0000c000);
+ writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+ writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+
+ writel(0x00000001, ssif_base + UMC_CPURST);
+ writel(0x00000001, ssif_base + UMC_IDSRST);
+ writel(0x00000001, ssif_base + UMC_IXMRST);
+ writel(0x00000001, ssif_base + UMC_MDMRST);
+ writel(0x00000001, ssif_base + UMC_MDDRST);
+ writel(0x00000001, ssif_base + UMC_SIORST);
+ writel(0x00000001, ssif_base + UMC_VIORST);
+ writel(0x00000001, ssif_base + UMC_FRCRST);
+ writel(0x00000001, ssif_base + UMC_RGLRST);
+ writel(0x00000001, ssif_base + UMC_AIORST);
+ writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
+{
+ if (freq == 1333) {
+ writel(0x45990b11, dramcont + UMC_CMDCTLA);
+ writel(0x16958924, dramcont + UMC_CMDCTLB);
+ writel(0x5101046A, dramcont + UMC_INITCTLA);
+
+ if (size == 1)
+ writel(0x27028B0A, dramcont + UMC_INITCTLB);
+ else if (size == 2)
+ writel(0x38028B0A, dramcont + UMC_INITCTLB);
+
+ writel(0x000FF0FF, dramcont + UMC_INITCTLC);
+ writel(0x00000b51, dramcont + UMC_DRMMR0);
+ } else if (freq == 1600) {
+ writel(0x36BB0F17, dramcont + UMC_CMDCTLA);
+ writel(0x18C6AA24, dramcont + UMC_CMDCTLB);
+ writel(0x5101387F, dramcont + UMC_INITCTLA);
+
+ if (size == 1)
+ writel(0x2F030D3F, dramcont + UMC_INITCTLB);
+ else if (size == 2)
+ writel(0x43030D3F, dramcont + UMC_INITCTLB);
+
+ writel(0x00FF00FF, dramcont + UMC_INITCTLC);
+ writel(0x00000d71, dramcont + UMC_DRMMR0);
+ }
+
+ writel(0x00000006, dramcont + UMC_DRMMR1);
+
+ if (freq == 1333)
+ writel(0x00000290, dramcont + UMC_DRMMR2);
+ else if (freq == 1600)
+ writel(0x00000298, dramcont + UMC_DRMMR2);
+
+ writel(0x00000800, dramcont + UMC_DRMMR3);
+
+ if (freq == 1333) {
+ if (size == 1)
+ writel(0x00240512, dramcont + UMC_SPCCTLA);
+ else if (size == 2)
+ writel(0x00350512, dramcont + UMC_SPCCTLA);
+
+ writel(0x00ff0006, dramcont + UMC_SPCCTLB);
+ writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
+ } else if (freq == 1600) {
+ if (size == 1)
+ writel(0x002B0617, dramcont + UMC_SPCCTLA);
+ else if (size == 2)
+ writel(0x003F0617, dramcont + UMC_SPCCTLA);
+
+ writel(0x00ff0008, dramcont + UMC_SPCCTLB);
+ writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
+ }
+
+ writel(0x04060806, dramcont + UMC_WDATACTL_D0);
+ writel(0x04a02000, dramcont + UMC_DATASET);
+ writel(0x00000000, ca_base + 0x2300);
+ writel(0x00400020, dramcont + UMC_DCCGCTL);
+ writel(0x00000003, dramcont + 0x7000);
+ writel(0x0000000f, dramcont + 0x8000);
+ writel(0x000000c3, dramcont + 0x8004);
+ writel(0x00000071, dramcont + 0x8008);
+ writel(0x0000003b, dramcont + UMC_DICGCTLA);
+ writel(0x020a0808, dramcont + UMC_DICGCTLB);
+ writel(0x00000004, dramcont + UMC_FLOWCTLG);
+ writel(0x80000201, ca_base + 0xc20);
+ writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
+ writel(0x00200000, dramcont + UMC_FLOWCTLB);
+ writel(0x00004444, dramcont + UMC_FLOWCTLC);
+ writel(0x200a0a00, dramcont + UMC_SPCSETB);
+ writel(0x00000000, dramcont + UMC_SPCSETD);
+ writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
+}
+
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
+{
+ void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
+ void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
+ void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
+ void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
+ void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
+
+ umc_dram_init_start(dramcont0);
+ umc_dram_init_start(dramcont1);
+ umc_dram_init_poll(dramcont0);
+ umc_dram_init_poll(dramcont1);
+
+ writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+
+ ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
+ writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+
+ ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 1);
+ ddrphy_training(phy1_0);
+
+ umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
+ umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
+
+ umc_start_ssif(ssif_base);
+
+ return 0;
+}
+
+int umc_init(void)
+{
+ return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
+ CONFIG_SDRAM1_SIZE / 0x08000000);
+}
+
+#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
+ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
+ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
+/* OK */
+#else
+#error Unsupported DDR configuration.
+#endif
OpenPOWER on IntegriCloud