diff options
Diffstat (limited to 'arch/arm/mach-uniphier/lowlevel_init.S')
| -rw-r--r-- | arch/arm/mach-uniphier/lowlevel_init.S | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index 3a3ada8fce..4a23ea4d56 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -25,8 +25,8 @@ ENTRY(lowlevel_init) * First we need to turn on MMU and Dcache again to get back * data access to L2. */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) - orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) + orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache mcr p15, 0, r0, c1, c0, 0 #ifdef CONFIG_DEBUG_LL @@ -41,7 +41,7 @@ ENTRY(lowlevel_init) ldr r3, =init_page_table @ page table must be 16KB aligned /* Disable MMU and Dcache before switching Page Table */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache mcr p15, 0, r0, c1, c0, 0 @@ -55,7 +55,7 @@ ENTRY(lowlevel_init) * bit[7] EXCL (Exclusive cache bit) * bit[6] SMP * bit[3] Write full line of zeros mode - * bit[2] L1 Prefetch enable + * bit[2] L1 prefetch enable * bit[1] L2 prefetch enable * bit[0] FW (Cache and TLB maintenance broadcast) */ @@ -81,7 +81,7 @@ primary_cpu: ldr r0, =_start @ entry for the secondary CPU str r0, [r1] ldr r0, [r1] @ make sure str is complete before sev - sev @ kick the sedoncary CPU + sev @ kick the secondary CPU mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register bfc r1, #0, #13 @ clear bit 12-0 mov r0, #-1 @@ -118,7 +118,7 @@ ENTRY(enable_mmu) * TLBs was already invalidated in "../start.S" * So, we don't need to invalidate it here. */ - mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable mcr p15, 0, r0, c1, c0, 0 @@ -155,7 +155,7 @@ ENTRY(setup_init_ram) ldr r1, = SSCOPPQSEF ldr r0, [r1] cmp r0, #0 @ check if the command is successfully set - bne 0b @ try again if an error occurres + bne 0b @ try again if an error occurs ldr r1, = SSCOLPQS 1: |
