summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra/clock.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/clock.c')
-rw-r--r--arch/arm/mach-tegra/clock.c21
1 files changed, 20 insertions, 1 deletions
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index f9dfcd0411..f75c6c664a 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -461,6 +461,11 @@ void reset_cmplx_set_enable(int cpu, int which, int reset)
writel(mask, &clkrst->crc_cpu_cmplx_clr);
}
+unsigned int __weak clk_m_get_rate(unsigned int parent_rate)
+{
+ return parent_rate;
+}
+
unsigned clock_get_rate(enum clock_id clkid)
{
struct clk_pll *pll;
@@ -472,6 +477,9 @@ unsigned clock_get_rate(enum clock_id clkid)
if (clkid == CLOCK_ID_OSC)
return parent_rate;
+ if (clkid == CLOCK_ID_CLK_M)
+ return clk_m_get_rate(parent_rate);
+
pll = get_pll(clkid);
if (!pll)
return 0;
@@ -483,7 +491,16 @@ unsigned clock_get_rate(enum clock_id clkid)
* PLLU uses p_mask/p_shift for VCO on all but T210,
* T210 uses normal DIVP. Handled in pllinfo table.
*/
- divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
+#ifdef CONFIG_TEGRA210
+ /*
+ * PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is
+ * not applied. pllP_out2 does have divp applied. All other pllP_outN
+ * are divided down from pllP_out0. We only support pllP_out0 in
+ * U-Boot at the time of writing this comment.
+ */
+ if (clkid != CLOCK_ID_PERIPH)
+#endif
+ divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
do_div(rate, divm);
return rate;
}
@@ -613,8 +630,10 @@ void clock_init(void)
pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M);
debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]);
debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
OpenPOWER on IntegriCloud