diff options
Diffstat (limited to 'arch/arm/include/asm/arch-omap3/i2c.h')
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/i2c.h | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-omap3/i2c.h b/arch/arm/include/asm/arch-omap3/i2c.h new file mode 100644 index 0000000000..490e03bb65 --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/i2c.h @@ -0,0 +1,203 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _I2C_H_ +#define _I2C_H_ + +#define I2C_DEFAULT_BASE I2C_BASE1 + +struct i2c { + unsigned short rev; /* 0x00 */ + unsigned short res1; + unsigned short ie; /* 0x04 */ + unsigned short res2; + unsigned short stat; /* 0x08 */ + unsigned short res3; + unsigned short iv; /* 0x0C */ + unsigned short res4[3]; + unsigned short buf; /* 0x14 */ + unsigned short res5; + unsigned short cnt; /* 0x18 */ + unsigned short res6; + unsigned short data; /* 0x1C */ + unsigned short res7; + unsigned short sysc; /* 0x20 */ + unsigned short res8; + unsigned short con; /* 0x24 */ + unsigned short res9; + unsigned short oa; /* 0x28 */ + unsigned short res10; + unsigned short sa; /* 0x2C */ + unsigned short res11; + unsigned short psc; /* 0x30 */ + unsigned short res12; + unsigned short scll; /* 0x34 */ + unsigned short res13; + unsigned short sclh; /* 0x38 */ + unsigned short res14; + unsigned short systest; /* 0x3c */ + unsigned short res15; +}; + +#define I2C_BUS_MAX 3 + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ + /* (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#define I2C_SCLL_SCLL 0 +#define I2C_SCLL_SCLL_M 0xFF +#define I2C_SCLL_HSSCLL 8 +#define I2C_SCLH_HSSCLL_M 0xFF +#define I2C_SCLH_SCLH 0 +#define I2C_SCLH_SCLH_M 0xFF +#define I2C_SCLH_HSSCLH 8 +#define I2C_SCLH_HSSCLH_M 0xFF + +#define OMAP_I2C_STANDARD 100000 +#define OMAP_I2C_FAST_MODE 400000 +#define OMAP_I2C_HIGH_SPEED 3400000 + +#define SYSTEM_CLOCK_12 12000000 +#define SYSTEM_CLOCK_13 13000000 +#define SYSTEM_CLOCK_192 19200000 +#define SYSTEM_CLOCK_96 96000000 + +/* Use the reference value of 96MHz if not explicitly set by the board */ +#ifndef I2C_IP_CLK +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#endif + +/* + * The reference minimum clock for high speed is 19.2MHz. + * The linux 2.6.30 kernel uses this value. + * The reference minimum clock for fast mode is 9.6MHz + * The reference minimum clock for standard mode is 4MHz + * In TRM, the value of 12MHz is used. + */ +#ifndef I2C_INTERNAL_SAMPLING_CLK +#define I2C_INTERNAL_SAMPLING_CLK 19200000 +#endif + +/* + * The equation for the low and high time is + * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed + * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed + * + * If the duty cycle is 50% + * + * tlow = scll + scll_trim = sampling clock / (2 * speed) + * thigh = sclh + sclh_trim = sampling clock / (2 * speed) + * + * In TRM + * scll_trim = 7 + * sclh_trim = 5 + * + * The linux 2.6.30 kernel uses + * scll_trim = 6 + * sclh_trim = 6 + * + * These are the trim values for standard and fast speed + */ +#ifndef I2C_FASTSPEED_SCLL_TRIM +#define I2C_FASTSPEED_SCLL_TRIM 6 +#endif +#ifndef I2C_FASTSPEED_SCLH_TRIM +#define I2C_FASTSPEED_SCLH_TRIM 6 +#endif + +/* These are the trim values for high speed */ +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM +#endif +#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM +#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM +#endif + +#define I2C_PSC_MAX 0x0f +#define I2C_PSC_MIN 0x00 + +#endif /* _I2C_H_ */ |
