diff options
Diffstat (limited to 'arch/arm/cpu/tegra20-common')
| -rw-r--r-- | arch/arm/cpu/tegra20-common/Makefile | 17 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/clock.c | 687 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/crypto.c | 137 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/crypto.h | 20 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/emc.c | 270 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/funcmux.c | 296 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/pinmux.c | 425 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/pmu.c | 65 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/warmboot.c | 372 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/warmboot_avp.c | 236 | ||||
| -rw-r--r-- | arch/arm/cpu/tegra20-common/warmboot_avp.h | 65 |
11 files changed, 0 insertions, 2590 deletions
diff --git a/arch/arm/cpu/tegra20-common/Makefile b/arch/arm/cpu/tegra20-common/Makefile deleted file mode 100644 index 0e4b3fc1dd..0000000000 --- a/arch/arm/cpu/tegra20-common/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2010,2011 Nvidia Corporation. -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# The AVP is ARMv4T architecture so we must use special compiler -# flags for any startup files it might use. -CFLAGS_warmboot_avp.o += -march=armv4t - -obj-y += clock.o funcmux.o pinmux.o -obj-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o -obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o -obj-$(CONFIG_TEGRA_PMU) += pmu.o diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c deleted file mode 100644 index 7b9e10cd93..0000000000 --- a/arch/arm/cpu/tegra20-common/clock.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Tegra20 Clock control functions */ - -#include <common.h> -#include <errno.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/timer.h> -#include <div64.h> -#include <fdtdec.h> - -/* - * Clock types that we can use as a source. The Tegra20 has muxes for the - * peripheral clocks, and in most cases there are four options for the clock - * source. This gives us a clock 'type' and exploits what commonality exists - * in the device. - * - * Letters are obvious, except for T which means CLK_M, and S which means the - * clock derived from 32KHz. Beware that CLK_M (also called OSC in the - * datasheet) and PLL_M are different things. The former is the basic - * clock supplied to the SOC from an external oscillator. The latter is the - * memory clock PLL. - * - * See definitions in clock_id in the header file. - */ -enum clock_type_id { - CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ - CLOCK_TYPE_MCPA, /* and so on */ - CLOCK_TYPE_MCPT, - CLOCK_TYPE_PCM, - CLOCK_TYPE_PCMT, - CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */ - CLOCK_TYPE_PCXTS, - CLOCK_TYPE_PDCT, - - CLOCK_TYPE_COUNT, - CLOCK_TYPE_NONE = -1, /* invalid clock type */ -}; - -enum { - CLOCK_MAX_MUX = 4 /* number of source options for each clock */ -}; - -/* - * Clock source mux for each clock type. This just converts our enum into - * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS - * is special as it has 5 sources. Since it also has a different number of - * bits in its register for the source, we just handle it with a special - * case in the code. - */ -#define CLK(x) CLOCK_ID_ ## x -static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = { - { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) }, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) }, - { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) }, - { CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) }, - { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) }, -}; - -/* - * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is - * not in the header file since it is for purely internal use - we want - * callers to use the PERIPH_ID for all access to peripheral clocks to avoid - * confusion bewteen PERIPH_ID_... and PERIPHC_... - * - * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be - * confusing. - * - * Note to SOC vendors: perhaps define a unified numbering for peripherals and - * use it for reset, clock enable, clock source/divider and even pinmuxing - * if you can. - */ -enum periphc_internal_id { - /* 0x00 */ - PERIPHC_I2S1, - PERIPHC_I2S2, - PERIPHC_SPDIF_OUT, - PERIPHC_SPDIF_IN, - PERIPHC_PWM, - PERIPHC_SPI1, - PERIPHC_SPI2, - PERIPHC_SPI3, - - /* 0x08 */ - PERIPHC_XIO, - PERIPHC_I2C1, - PERIPHC_DVC_I2C, - PERIPHC_TWC, - PERIPHC_0c, - PERIPHC_10, /* PERIPHC_SPI1, what is this really? */ - PERIPHC_DISP1, - PERIPHC_DISP2, - - /* 0x10 */ - PERIPHC_CVE, - PERIPHC_IDE0, - PERIPHC_VI, - PERIPHC_1c, - PERIPHC_SDMMC1, - PERIPHC_SDMMC2, - PERIPHC_G3D, - PERIPHC_G2D, - - /* 0x18 */ - PERIPHC_NDFLASH, - PERIPHC_SDMMC4, - PERIPHC_VFIR, - PERIPHC_EPP, - PERIPHC_MPE, - PERIPHC_MIPI, - PERIPHC_UART1, - PERIPHC_UART2, - - /* 0x20 */ - PERIPHC_HOST1X, - PERIPHC_21, - PERIPHC_TVO, - PERIPHC_HDMI, - PERIPHC_24, - PERIPHC_TVDAC, - PERIPHC_I2C2, - PERIPHC_EMC, - - /* 0x28 */ - PERIPHC_UART3, - PERIPHC_29, - PERIPHC_VI_SENSOR, - PERIPHC_2b, - PERIPHC_2c, - PERIPHC_SPI4, - PERIPHC_I2C3, - PERIPHC_SDMMC3, - - /* 0x30 */ - PERIPHC_UART4, - PERIPHC_UART5, - PERIPHC_VDE, - PERIPHC_OWR, - PERIPHC_NOR, - PERIPHC_CSITE, - - PERIPHC_COUNT, - - PERIPHC_NONE = -1, -}; - -/* - * Clock type for each peripheral clock source. We put the name in each - * record just so it is easy to match things up - */ -#define TYPE(name, type) type -static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { - /* 0x00 */ - TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), - TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM), - TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS), - TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT), - - /* 0x08 */ - TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT), - - /* 0x10 */ - TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA), - - /* 0x18 */ - TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT), - - /* 0x20 */ - TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT), - TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT), - - /* 0x28 */ - TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), - TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16), - TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT), - - /* 0x30 */ - TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT), - TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT), -}; - -/* - * This array translates a periph_id to a periphc_internal_id - * - * Not present/matched up: - * uint vi_sensor; _VI_SENSOR_0, 0x1A8 - * SPDIF - which is both 0x08 and 0x0c - * - */ -#define NONE(name) (-1) -#define OFFSET(name, value) PERIPHC_ ## name -static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { - /* Low word: 31:0 */ - NONE(CPU), - NONE(RESERVED1), - NONE(RESERVED2), - NONE(AC97), - NONE(RTC), - NONE(TMR), - PERIPHC_UART1, - PERIPHC_UART2, /* and vfir 0x68 */ - - /* 0x08 */ - NONE(GPIO), - PERIPHC_SDMMC2, - NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */ - PERIPHC_I2S1, - PERIPHC_I2C1, - PERIPHC_NDFLASH, - PERIPHC_SDMMC1, - PERIPHC_SDMMC4, - - /* 0x10 */ - PERIPHC_TWC, - PERIPHC_PWM, - PERIPHC_I2S2, - PERIPHC_EPP, - PERIPHC_VI, - PERIPHC_G2D, - NONE(USBD), - NONE(ISP), - - /* 0x18 */ - PERIPHC_G3D, - PERIPHC_IDE0, - PERIPHC_DISP2, - PERIPHC_DISP1, - PERIPHC_HOST1X, - NONE(VCP), - NONE(RESERVED30), - NONE(CACHE2), - - /* Middle word: 63:32 */ - NONE(MEM), - NONE(AHBDMA), - NONE(APBDMA), - NONE(RESERVED35), - NONE(KBC), - NONE(STAT_MON), - NONE(PMC), - NONE(FUSE), - - /* 0x28 */ - NONE(KFUSE), - NONE(SBC1), /* SBC1, 0x34, is this SPI1? */ - PERIPHC_NOR, - PERIPHC_SPI1, - PERIPHC_SPI2, - PERIPHC_XIO, - PERIPHC_SPI3, - PERIPHC_DVC_I2C, - - /* 0x30 */ - NONE(DSI), - PERIPHC_TVO, /* also CVE 0x40 */ - PERIPHC_MIPI, - PERIPHC_HDMI, - PERIPHC_CSITE, - PERIPHC_TVDAC, - PERIPHC_I2C2, - PERIPHC_UART3, - - /* 0x38 */ - NONE(RESERVED56), - PERIPHC_EMC, - NONE(USB2), - NONE(USB3), - PERIPHC_MPE, - PERIPHC_VDE, - NONE(BSEA), - NONE(BSEV), - - /* Upper word 95:64 */ - NONE(SPEEDO), - PERIPHC_UART4, - PERIPHC_UART5, - PERIPHC_I2C3, - PERIPHC_SPI4, - PERIPHC_SDMMC3, - NONE(PCIE), - PERIPHC_OWR, - - /* 0x48 */ - NONE(AFI), - NONE(CORESIGHT), - NONE(PCIEXCLK), - NONE(AVPUCQ), - NONE(RESERVED76), - NONE(RESERVED77), - NONE(RESERVED78), - NONE(RESERVED79), - - /* 0x50 */ - NONE(RESERVED80), - NONE(RESERVED81), - NONE(RESERVED82), - NONE(RESERVED83), - NONE(IRAMA), - NONE(IRAMB), - NONE(IRAMC), - NONE(IRAMD), - - /* 0x58 */ - NONE(CRAM2), -}; - -/* - * Get the oscillator frequency, from the corresponding hardware configuration - * field. T20 has 4 frequencies that it supports. - */ -enum clock_osc_freq clock_get_osc_freq(void) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg; - - reg = readl(&clkrst->crc_osc_ctrl); - return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; -} - -/* Returns a pointer to the clock source register for a peripheral */ -u32 *get_periph_source_reg(enum periph_id periph_id) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - enum periphc_internal_id internal_id; - - assert(clock_periph_id_isvalid(periph_id)); - internal_id = periph_id_to_internal_id[periph_id]; - assert(internal_id != -1); - return &clkrst->crc_clk_src[internal_id]; -} - -/** - * Given a peripheral ID and the required source clock, this returns which - * value should be programmed into the source mux for that peripheral. - * - * There is special code here to handle the one source type with 5 sources. - * - * @param periph_id peripheral to start - * @param source PLL id of required parent clock - * @param mux_bits Set to number of bits in mux register: 2 or 4 - * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) - */ -int get_periph_clock_source(enum periph_id periph_id, - enum clock_id parent, int *mux_bits, int *divider_bits) -{ - enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; - - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); - - /* - * Special cases here for the clock with a 4-bit source mux and I2C - * with its 16-bit divisor - */ - if (type == CLOCK_TYPE_PCXTS) - *mux_bits = MASK_BITS_31_28; - else - *mux_bits = MASK_BITS_31_30; - if (type == CLOCK_TYPE_PCMT16) - *divider_bits = 16; - else - *divider_bits = 8; - - for (mux = 0; mux < CLOCK_MAX_MUX; mux++) - if (clock_source[type][mux] == parent) - return mux; - - /* - * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS - * which is not in our table. If not, then they are asking for a - * source which this peripheral can't access through its mux. - */ - assert(type == CLOCK_TYPE_PCXTS); - assert(parent == CLOCK_ID_SFROM32KHZ); - if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ) - return 4; /* mux value for this clock */ - - /* if we get here, either us or the caller has made a mistake */ - printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, - parent); - return -1; -} - -void clock_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; - u32 reg; - - /* Enable/disable the clock to this peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - reg = readl(clk); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, clk); -} - -void reset_set_enable(enum periph_id periph_id, int enable) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; - u32 reg; - - /* Enable/disable reset to the peripheral */ - assert(clock_periph_id_isvalid(periph_id)); - reg = readl(reset); - if (enable) - reg |= PERIPH_MASK(periph_id); - else - reg &= ~PERIPH_MASK(periph_id); - writel(reg, reset); -} - -#ifdef CONFIG_OF_CONTROL -/* - * Convert a device tree clock ID to our peripheral ID. They are mostly - * the same but we are very cautious so we check that a valid clock ID is - * provided. - * - * @param clk_id Clock ID according to tegra20 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid - */ -enum periph_id clk_id_to_periph_id(int clk_id) -{ - if (clk_id > PERIPH_ID_COUNT) - return PERIPH_ID_NONE; - - switch (clk_id) { - case PERIPH_ID_RESERVED1: - case PERIPH_ID_RESERVED2: - case PERIPH_ID_RESERVED30: - case PERIPH_ID_RESERVED35: - case PERIPH_ID_RESERVED56: - case PERIPH_ID_PCIEXCLK: - case PERIPH_ID_RESERVED76: - case PERIPH_ID_RESERVED77: - case PERIPH_ID_RESERVED78: - case PERIPH_ID_RESERVED79: - case PERIPH_ID_RESERVED80: - case PERIPH_ID_RESERVED81: - case PERIPH_ID_RESERVED82: - case PERIPH_ID_RESERVED83: - case PERIPH_ID_RESERVED91: - return PERIPH_ID_NONE; - default: - return clk_id; - } -} -#endif /* CONFIG_OF_CONTROL */ - -void clock_early_init(void) -{ - /* - * PLLP output frequency set to 216MHz - * PLLC output frequency set to 600Mhz - * - * TODO: Can we calculate these values instead of hard-coding? - */ - switch (clock_get_osc_freq()) { - case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); - break; - - case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); - break; - - case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ - clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8); - clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); - break; - case CLOCK_OSC_FREQ_19_2: - default: - /* - * These are not supported. It is too early to print a - * message and the UART likely won't work anyway due to the - * oscillator being wrong. - */ - break; - } -} - -void arch_timer_init(void) -{ -} - -#define PMC_SATA_PWRGT 0x1ac -#define PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5) -#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4) - -#define PLLE_SS_CNTL 0x68 -#define PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24) -#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16) -#define PLLE_SS_CNTL_SSCBYP (1 << 12) -#define PLLE_SS_CNTL_INTERP_RESET (1 << 11) -#define PLLE_SS_CNTL_BYPASS_SS (1 << 10) -#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0) - -#define PLLE_BASE 0x0e8 -#define PLLE_BASE_ENABLE_CML (1 << 31) -#define PLLE_BASE_ENABLE (1 << 30) -#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24) -#define PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16) -#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8) -#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0) - -#define PLLE_MISC 0x0ec -#define PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16) -#define PLLE_MISC_PLL_READY (1 << 15) -#define PLLE_MISC_LOCK (1 << 11) -#define PLLE_MISC_LOCK_ENABLE (1 << 9) -#define PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2) - -static int tegra_plle_train(void) -{ - unsigned int timeout = 2000; - unsigned long value; - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT); - value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE; - writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT); - - do { - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if (value & PLLE_MISC_PLL_READY) - break; - - udelay(100); - } while (--timeout); - - if (timeout == 0) { - error("timeout waiting for PLLE to become ready"); - return -ETIMEDOUT; - } - - return 0; -} - -int tegra_plle_enable(void) -{ - unsigned int timeout = 1000; - u32 value; - int err; - - /* disable PLLE clock */ - value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); - value &= ~PLLE_BASE_ENABLE_CML; - value &= ~PLLE_BASE_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); - - /* clear lock enable and setup field */ - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - value &= ~PLLE_MISC_LOCK_ENABLE; - value &= ~PLLE_MISC_SETUP_BASE(0xffff); - value &= ~PLLE_MISC_SETUP_EXT(0x3); - writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if ((value & PLLE_MISC_PLL_READY) == 0) { - err = tegra_plle_train(); - if (err < 0) { - error("failed to train PLLE: %d", err); - return err; - } - } - - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - value |= PLLE_MISC_SETUP_BASE(0x7); - value |= PLLE_MISC_LOCK_ENABLE; - value |= PLLE_MISC_SETUP_EXT(0); - writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET | - PLLE_SS_CNTL_BYPASS_SS; - writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE); - value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE; - writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE); - - do { - value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC); - if (value & PLLE_MISC_LOCK) - break; - - udelay(2); - } while (--timeout); - - if (timeout == 0) { - error("timeout waiting for PLLE to lock"); - return -ETIMEDOUT; - } - - udelay(50); - - value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f); - value |= PLLE_SS_CNTL_SSCINCINTRV(0x18); - - value &= ~PLLE_SS_CNTL_SSCINC(0xff); - value |= PLLE_SS_CNTL_SSCINC(0x01); - - value &= ~PLLE_SS_CNTL_SSCBYP; - value &= ~PLLE_SS_CNTL_INTERP_RESET; - value &= ~PLLE_SS_CNTL_BYPASS_SS; - - value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff); - value |= PLLE_SS_CNTL_SSCMAX(0x24); - writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL); - - return 0; -} diff --git a/arch/arm/cpu/tegra20-common/crypto.c b/arch/arm/cpu/tegra20-common/crypto.c deleted file mode 100644 index ec95d7ceb1..0000000000 --- a/arch/arm/cpu/tegra20-common/crypto.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/errno.h> -#include "crypto.h" -#include "aes.h" - -static u8 zero_key[16]; - -#define AES_CMAC_CONST_RB 0x87 /* from RFC 4493, Figure 2.2 */ - -enum security_op { - SECURITY_SIGN = 1 << 0, /* Sign the data */ - SECURITY_ENCRYPT = 1 << 1, /* Encrypt the data */ -}; - -/** - * Shift a vector left by one bit - * - * \param in Input vector - * \param out Output vector - * \param size Length of vector in bytes - */ -static void left_shift_vector(u8 *in, u8 *out, int size) -{ - int carry = 0; - int i; - - for (i = size - 1; i >= 0; i--) { - out[i] = (in[i] << 1) | carry; - carry = in[i] >> 7; /* get most significant bit */ - } -} - -/** - * Sign a block of data, putting the result into dst. - * - * \param key Input AES key, length AES_KEY_LENGTH - * \param key_schedule Expanded key to use - * \param src Source data of length 'num_aes_blocks' blocks - * \param dst Destination buffer, length AES_KEY_LENGTH - * \param num_aes_blocks Number of AES blocks to encrypt - */ -static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst, - u32 num_aes_blocks) -{ - u8 tmp_data[AES_KEY_LENGTH]; - u8 left[AES_KEY_LENGTH]; - u8 k1[AES_KEY_LENGTH]; - u8 *cbc_chain_data; - unsigned i; - - cbc_chain_data = zero_key; /* Convenient array of 0's for IV */ - - /* compute K1 constant needed by AES-CMAC calculation */ - for (i = 0; i < AES_KEY_LENGTH; i++) - tmp_data[i] = 0; - - aes_cbc_encrypt_blocks(key_schedule, tmp_data, left, 1); - - left_shift_vector(left, k1, sizeof(left)); - - if ((left[0] >> 7) != 0) /* get MSB of L */ - k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB; - - /* compute the AES-CMAC value */ - for (i = 0; i < num_aes_blocks; i++) { - /* Apply the chain data */ - aes_apply_cbc_chain_data(cbc_chain_data, src, tmp_data); - - /* for the final block, XOR K1 into the IV */ - if (i == num_aes_blocks - 1) - aes_apply_cbc_chain_data(tmp_data, k1, tmp_data); - - /* encrypt the AES block */ - aes_encrypt(tmp_data, key_schedule, dst); - - debug("sign_obj: block %d of %d\n", i, num_aes_blocks); - - /* Update pointers for next loop. */ - cbc_chain_data = dst; - src += AES_KEY_LENGTH; - } -} - -/** - * Encrypt and sign a block of data (depending on security mode). - * - * \param key Input AES key, length AES_KEY_LENGTH - * \param oper Security operations mask to perform (enum security_op) - * \param src Source data - * \param length Size of source data - * \param sig_dst Destination address for signature, AES_KEY_LENGTH bytes - */ -static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src, - u32 length, u8 *sig_dst) -{ - u32 num_aes_blocks; - u8 key_schedule[AES_EXPAND_KEY_LENGTH]; - - debug("encrypt_and_sign: length = %d\n", length); - - /* - * The only need for a key is for signing/checksum purposes, so - * if not encrypting, expand a key of 0s. - */ - aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key, key_schedule); - - num_aes_blocks = (length + AES_KEY_LENGTH - 1) / AES_KEY_LENGTH; - - if (oper & SECURITY_ENCRYPT) { - /* Perform this in place, resulting in src being encrypted. */ - debug("encrypt_and_sign: begin encryption\n"); - aes_cbc_encrypt_blocks(key_schedule, src, src, num_aes_blocks); - debug("encrypt_and_sign: end encryption\n"); - } - - if (oper & SECURITY_SIGN) { - /* encrypt the data, overwriting the result in signature. */ - debug("encrypt_and_sign: begin signing\n"); - sign_object(key, key_schedule, src, sig_dst, num_aes_blocks); - debug("encrypt_and_sign: end signing\n"); - } - - return 0; -} - -int sign_data_block(u8 *source, unsigned length, u8 *signature) -{ - return encrypt_and_sign(zero_key, SECURITY_SIGN, source, - length, signature); -} diff --git a/arch/arm/cpu/tegra20-common/crypto.h b/arch/arm/cpu/tegra20-common/crypto.h deleted file mode 100644 index f59b92768a..0000000000 --- a/arch/arm/cpu/tegra20-common/crypto.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CRYPTO_H_ -#define _CRYPTO_H_ - -/** - * Sign a block of data - * - * \param source Source data - * \param length Size of source data - * \param signature Destination address for signature, AES_KEY_LENGTH bytes - */ -int sign_data_block(u8 *source, unsigned length, u8 *signature); - -#endif /* #ifndef _CRYPTO_H_ */ diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c deleted file mode 100644 index ed2462ab0f..0000000000 --- a/arch/arm/cpu/tegra20-common/emc.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <fdtdec.h> -#include <asm/io.h> -#include <asm/arch-tegra/ap.h> -#include <asm/arch-tegra/apb_misc.h> -#include <asm/arch/clock.h> -#include <asm/arch/emc.h> -#include <asm/arch/tegra.h> - -/* - * The EMC registers have shadow registers. When the EMC clock is updated - * in the clock controller, the shadow registers are copied to the active - * registers, allowing glitchless memory bus frequency changes. - * This function updates the shadow registers for a new clock frequency, - * and relies on the clock lock on the emc clock to avoid races between - * multiple frequency changes - */ - -/* - * This table defines the ordering of the registers provided to - * tegra_set_mmc() - * TODO: Convert to fdt version once available - */ -static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = { - 0x2c, /* RC */ - 0x30, /* RFC */ - 0x34, /* RAS */ - 0x38, /* RP */ - 0x3c, /* R2W */ - 0x40, /* W2R */ - 0x44, /* R2P */ - 0x48, /* W2P */ - 0x4c, /* RD_RCD */ - 0x50, /* WR_RCD */ - 0x54, /* RRD */ - 0x58, /* REXT */ - 0x5c, /* WDV */ - 0x60, /* QUSE */ - 0x64, /* QRST */ - 0x68, /* QSAFE */ - 0x6c, /* RDV */ - 0x70, /* REFRESH */ - 0x74, /* BURST_REFRESH_NUM */ - 0x78, /* PDEX2WR */ - 0x7c, /* PDEX2RD */ - 0x80, /* PCHG2PDEN */ - 0x84, /* ACT2PDEN */ - 0x88, /* AR2PDEN */ - 0x8c, /* RW2PDEN */ - 0x90, /* TXSR */ - 0x94, /* TCKE */ - 0x98, /* TFAW */ - 0x9c, /* TRPAB */ - 0xa0, /* TCLKSTABLE */ - 0xa4, /* TCLKSTOP */ - 0xa8, /* TREFBW */ - 0xac, /* QUSE_EXTRA */ - 0x114, /* FBIO_CFG6 */ - 0xb0, /* ODT_WRITE */ - 0xb4, /* ODT_READ */ - 0x104, /* FBIO_CFG5 */ - 0x2bc, /* CFG_DIG_DLL */ - 0x2c0, /* DLL_XFORM_DQS */ - 0x2c4, /* DLL_XFORM_QUSE */ - 0x2e0, /* ZCAL_REF_CNT */ - 0x2e4, /* ZCAL_WAIT_CNT */ - 0x2a8, /* AUTO_CAL_INTERVAL */ - 0x2d0, /* CFG_CLKTRIM_0 */ - 0x2d4, /* CFG_CLKTRIM_1 */ - 0x2d8, /* CFG_CLKTRIM_2 */ -}; - -struct emc_ctlr *emc_get_controller(const void *blob) -{ - fdt_addr_t addr; - int node; - - node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC); - if (node > 0) { - addr = fdtdec_get_addr(blob, node, "reg"); - if (addr != FDT_ADDR_T_NONE) - return (struct emc_ctlr *)addr; - } - return NULL; -} - -/* Error codes we use */ -enum { - ERR_NO_EMC_NODE = -10, - ERR_NO_EMC_REG, - ERR_NO_FREQ, - ERR_FREQ_NOT_FOUND, - ERR_BAD_REGS, - ERR_NO_RAM_CODE, - ERR_RAM_CODE_NOT_FOUND, -}; - -/** - * Find EMC tables for the given ram code. - * - * The tegra EMC binding has two options, one using the ram code and one not. - * We detect which is in use by looking for the nvidia,use-ram-code property. - * If this is not present, then the EMC tables are directly below 'node', - * otherwise we select the correct emc-tables subnode based on the 'ram_code' - * value. - * - * @param blob Device tree blob - * @param node EMC node (nvidia,tegra20-emc compatible string) - * @param ram_code RAM code to select (0-3, or -1 if unknown) - * @return 0 if ok, otherwise a -ve ERR_ code (see enum above) - */ -static int find_emc_tables(const void *blob, int node, int ram_code) -{ - int need_ram_code; - int depth; - int offset; - - /* If we are using RAM codes, scan through the tables for our code */ - need_ram_code = fdtdec_get_bool(blob, node, "nvidia,use-ram-code"); - if (!need_ram_code) - return node; - if (ram_code == -1) { - debug("%s: RAM code required but not supplied\n", __func__); - return ERR_NO_RAM_CODE; - } - - offset = node; - depth = 0; - do { - /* - * Sadly there is no compatible string so we cannot use - * fdtdec_next_compatible_subnode(). - */ - offset = fdt_next_node(blob, offset, &depth); - if (depth <= 0) - break; - - /* Make sure this is a direct subnode */ - if (depth != 1) - continue; - if (strcmp("emc-tables", fdt_get_name(blob, offset, NULL))) - continue; - - if (fdtdec_get_int(blob, offset, "nvidia,ram-code", -1) - == ram_code) - return offset; - } while (1); - - debug("%s: Could not find tables for RAM code %d\n", __func__, - ram_code); - return ERR_RAM_CODE_NOT_FOUND; -} - -/** - * Decode the EMC node of the device tree, returning a pointer to the emc - * controller and the table to be used for the given rate. - * - * @param blob Device tree blob - * @param rate Clock speed of memory controller in Hz (=2x memory bus rate) - * @param emcp Returns address of EMC controller registers - * @param tablep Returns pointer to table to program into EMC. There are - * TEGRA_EMC_NUM_REGS entries, destined for offsets as per the - * emc_reg_addr array. - * @return 0 if ok, otherwise a -ve error code which will allow someone to - * figure out roughly what went wrong by looking at this code. - */ -static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp, - const u32 **tablep) -{ - struct apb_misc_pp_ctlr *pp = - (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE; - int ram_code; - int depth; - int node; - - ram_code = (readl(&pp->strapping_opt_a) & RAM_CODE_MASK) - >> RAM_CODE_SHIFT; - /* - * The EMC clock rate is twice the bus rate, and the bus rate is - * measured in kHz - */ - rate = rate / 2 / 1000; - - node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC); - if (node < 0) { - debug("%s: No EMC node found in FDT\n", __func__); - return ERR_NO_EMC_NODE; - } - *emcp = (struct emc_ctlr *)fdtdec_get_addr(blob, node, "reg"); - if (*emcp == (struct emc_ctlr *)FDT_ADDR_T_NONE) { - debug("%s: No EMC node reg property\n", __func__); - return ERR_NO_EMC_REG; - } - - /* Work out the parent node which contains our EMC tables */ - node = find_emc_tables(blob, node, ram_code & 3); - if (node < 0) - return node; - - depth = 0; - for (;;) { - int node_rate; - - node = fdtdec_next_compatible_subnode(blob, node, - COMPAT_NVIDIA_TEGRA20_EMC_TABLE, &depth); - if (node < 0) - break; - node_rate = fdtdec_get_int(blob, node, "clock-frequency", -1); - if (node_rate == -1) { - debug("%s: Missing clock-frequency\n", __func__); - return ERR_NO_FREQ; /* we expect this property */ - } - - if (node_rate == rate) - break; - } - if (node < 0) { - debug("%s: No node found for clock frequency %d\n", __func__, - rate); - return ERR_FREQ_NOT_FOUND; - } - - *tablep = fdtdec_locate_array(blob, node, "nvidia,emc-registers", - TEGRA_EMC_NUM_REGS); - if (!*tablep) { - debug("%s: node '%s' array missing / wrong size\n", __func__, - fdt_get_name(blob, node, NULL)); - return ERR_BAD_REGS; - } - - /* All seems well */ - return 0; -} - -int tegra_set_emc(const void *blob, unsigned rate) -{ - struct emc_ctlr *emc; - const u32 *table = NULL; - int err, i; - - err = decode_emc(blob, rate, &emc, &table); - if (err) { - debug("Warning: no valid EMC (%d), memory timings unset\n", - err); - return err; - } - - debug("%s: Table found, setting EMC values as follows:\n", __func__); - for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) { - u32 value = fdt32_to_cpu(table[i]); - u32 addr = (uintptr_t)emc + emc_reg_addr[i]; - - debug(" %#x: %#x\n", addr, value); - writel(value, addr); - } - - /* trigger emc with new settings */ - clock_adjust_periph_pll_div(PERIPH_ID_EMC, CLOCK_ID_MEMORY, - clock_get_rate(CLOCK_ID_MEMORY), NULL); - debug("EMC clock set to %lu\n", - clock_get_periph_rate(PERIPH_ID_EMC, CLOCK_ID_MEMORY)); - - return 0; -} diff --git a/arch/arm/cpu/tegra20-common/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c deleted file mode 100644 index 0df4a0738d..0000000000 --- a/arch/arm/cpu/tegra20-common/funcmux.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Tegra20 high-level function multiplexing */ -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/arch/funcmux.h> -#include <asm/arch/pinmux.h> - -/* - * The PINMUX macro is used to set up pinmux tables. - */ -#define PINMUX(grp, mux, pupd, tri) \ - {PMUX_PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri} - -static const struct pmux_pingrp_config disp1_default[] = { - PINMUX(LDI, DISPA, NORMAL, NORMAL), - PINMUX(LHP0, DISPA, NORMAL, NORMAL), - PINMUX(LHP1, DISPA, NORMAL, NORMAL), - PINMUX(LHP2, DISPA, NORMAL, NORMAL), - PINMUX(LHS, DISPA, NORMAL, NORMAL), - PINMUX(LM0, RSVD4, NORMAL, NORMAL), - PINMUX(LPP, DISPA, NORMAL, NORMAL), - PINMUX(LPW0, DISPA, NORMAL, NORMAL), - PINMUX(LPW2, DISPA, NORMAL, NORMAL), - PINMUX(LSC0, DISPA, NORMAL, NORMAL), - PINMUX(LSPI, DISPA, NORMAL, NORMAL), - PINMUX(LVP1, DISPA, NORMAL, NORMAL), - PINMUX(LVS, DISPA, NORMAL, NORMAL), - PINMUX(SLXD, SPDIF, NORMAL, NORMAL), -}; - - -int funcmux_select(enum periph_id id, int config) -{ - int bad_config = config != FUNCMUX_DEFAULT; - - switch (id) { - case PERIPH_ID_UART1: - switch (config) { - case FUNCMUX_UART1_IRRX_IRTX: - pinmux_set_func(PMUX_PINGRP_IRRX, PMUX_FUNC_UARTA); - pinmux_set_func(PMUX_PINGRP_IRTX, PMUX_FUNC_UARTA); - pinmux_tristate_disable(PMUX_PINGRP_IRRX); - pinmux_tristate_disable(PMUX_PINGRP_IRTX); - break; - case FUNCMUX_UART1_UAA_UAB: - pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_UARTA); - pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_UARTA); - pinmux_tristate_disable(PMUX_PINGRP_UAA); - pinmux_tristate_disable(PMUX_PINGRP_UAB); - bad_config = 0; - break; - case FUNCMUX_UART1_GPU: - pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_UARTA); - pinmux_tristate_disable(PMUX_PINGRP_GPU); - bad_config = 0; - break; - case FUNCMUX_UART1_SDIO1: - pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_UARTA); - pinmux_tristate_disable(PMUX_PINGRP_SDIO1); - bad_config = 0; - break; - } - if (!bad_config) { - /* - * Tegra appears to boot with function UARTA pre- - * selected on mux group SDB. If two mux groups are - * both set to the same function, it's unclear which - * group's pins drive the RX signals into the HW. - * For UARTA, SDB certainly overrides group IRTX in - * practice. To solve this, configure some alternative - * function on SDB to avoid the conflict. Also, tri- - * state the group to avoid driving any signal onto it - * until we know what's connected. - */ - pinmux_tristate_enable(PMUX_PINGRP_SDB); - pinmux_set_func(PMUX_PINGRP_SDB, PMUX_FUNC_SDIO3); - } - break; - - case PERIPH_ID_UART2: - if (config == FUNCMUX_UART2_UAD) { - pinmux_set_func(PMUX_PINGRP_UAD, PMUX_FUNC_UARTB); - pinmux_tristate_disable(PMUX_PINGRP_UAD); - } - break; - - case PERIPH_ID_UART4: - if (config == FUNCMUX_UART4_GMC) { - pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_UARTD); - pinmux_tristate_disable(PMUX_PINGRP_GMC); - } - break; - - case PERIPH_ID_DVC_I2C: - /* there is only one selection, pinmux_config is ignored */ - if (config == FUNCMUX_DVC_I2CP) { - pinmux_set_func(PMUX_PINGRP_I2CP, PMUX_FUNC_I2C); - pinmux_tristate_disable(PMUX_PINGRP_I2CP); - } - break; - - case PERIPH_ID_I2C1: - /* support pinmux_config of 0 for now, */ - if (config == FUNCMUX_I2C1_RM) { - pinmux_set_func(PMUX_PINGRP_RM, PMUX_FUNC_I2C); - pinmux_tristate_disable(PMUX_PINGRP_RM); - } - break; - case PERIPH_ID_I2C2: /* I2C2 */ - switch (config) { - case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */ - pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_I2C2); - /* PTA to HDMI */ - pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_HDMI); - pinmux_tristate_disable(PMUX_PINGRP_DDC); - break; - case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */ - pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_I2C2); - /* set DDC_SEL to RSVDx (RSVD2 works for now) */ - pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_RSVD2); - pinmux_tristate_disable(PMUX_PINGRP_PTA); - bad_config = 0; - break; - } - break; - case PERIPH_ID_I2C3: /* I2C3 */ - /* support pinmux_config of 0 for now */ - if (config == FUNCMUX_I2C3_DTF) { - pinmux_set_func(PMUX_PINGRP_DTF, PMUX_FUNC_I2C3); - pinmux_tristate_disable(PMUX_PINGRP_DTF); - } - break; - - case PERIPH_ID_SDMMC1: - if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) { - pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_SDIO1); - pinmux_tristate_disable(PMUX_PINGRP_SDIO1); - } - break; - - case PERIPH_ID_SDMMC2: - if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) { - pinmux_set_func(PMUX_PINGRP_DTA, PMUX_FUNC_SDIO2); - pinmux_set_func(PMUX_PINGRP_DTD, PMUX_FUNC_SDIO2); - - pinmux_tristate_disable(PMUX_PINGRP_DTA); - pinmux_tristate_disable(PMUX_PINGRP_DTD); - } - break; - - case PERIPH_ID_SDMMC3: - switch (config) { - case FUNCMUX_SDMMC3_SDB_SLXA_8BIT: - pinmux_set_func(PMUX_PINGRP_SLXA, PMUX_FUNC_SDIO3); - pinmux_set_func(PMUX_PINGRP_SLXC, PMUX_FUNC_SDIO3); - pinmux_set_func(PMUX_PINGRP_SLXD, PMUX_FUNC_SDIO3); - pinmux_set_func(PMUX_PINGRP_SLXK, PMUX_FUNC_SDIO3); - - pinmux_tristate_disable(PMUX_PINGRP_SLXA); - pinmux_tristate_disable(PMUX_PINGRP_SLXC); - pinmux_tristate_disable(PMUX_PINGRP_SLXD); - pinmux_tristate_disable(PMUX_PINGRP_SLXK); - /* fall through */ - - case FUNCMUX_SDMMC3_SDB_4BIT: - pinmux_set_func(PMUX_PINGRP_SDB, PMUX_FUNC_SDIO3); - pinmux_set_func(PMUX_PINGRP_SDC, PMUX_FUNC_SDIO3); - pinmux_set_func(PMUX_PINGRP_SDD, PMUX_FUNC_SDIO3); - - pinmux_tristate_disable(PMUX_PINGRP_SDB); - pinmux_tristate_disable(PMUX_PINGRP_SDC); - pinmux_tristate_disable(PMUX_PINGRP_SDD); - bad_config = 0; - break; - } - break; - - case PERIPH_ID_SDMMC4: - switch (config) { - case FUNCMUX_SDMMC4_ATC_ATD_8BIT: - pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_SDIO4); - pinmux_set_func(PMUX_PINGRP_ATD, PMUX_FUNC_SDIO4); - - pinmux_tristate_disable(PMUX_PINGRP_ATC); - pinmux_tristate_disable(PMUX_PINGRP_ATD); - break; - - case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT: - pinmux_set_func(PMUX_PINGRP_GME, PMUX_FUNC_SDIO4); - pinmux_tristate_disable(PMUX_PINGRP_GME); - /* fall through */ - - case FUNCMUX_SDMMC4_ATB_GMA_4_BIT: - pinmux_set_func(PMUX_PINGRP_ATB, PMUX_FUNC_SDIO4); - pinmux_set_func(PMUX_PINGRP_GMA, PMUX_FUNC_SDIO4); - - pinmux_tristate_disable(PMUX_PINGRP_ATB); - pinmux_tristate_disable(PMUX_PINGRP_GMA); - bad_config = 0; - break; - } - break; - - case PERIPH_ID_KBC: - if (config == FUNCMUX_DEFAULT) { - enum pmux_pingrp grp[] = {PMUX_PINGRP_KBCA, - PMUX_PINGRP_KBCB, PMUX_PINGRP_KBCC, - PMUX_PINGRP_KBCD, PMUX_PINGRP_KBCE, - PMUX_PINGRP_KBCF}; - int i; - - for (i = 0; i < ARRAY_SIZE(grp); i++) { - pinmux_tristate_disable(grp[i]); - pinmux_set_func(grp[i], PMUX_FUNC_KBC); - pinmux_set_pullupdown(grp[i], PMUX_PULL_UP); - } - } - break; - - case PERIPH_ID_USB2: - if (config == FUNCMUX_USB2_ULPI) { - pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_ULPI); - pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_ULPI); - pinmux_set_func(PMUX_PINGRP_UDA, PMUX_FUNC_ULPI); - - pinmux_tristate_disable(PMUX_PINGRP_UAA); - pinmux_tristate_disable(PMUX_PINGRP_UAB); - pinmux_tristate_disable(PMUX_PINGRP_UDA); - } - break; - - case PERIPH_ID_SPI1: - if (config == FUNCMUX_SPI1_GMC_GMD) { - pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH); - pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH); - - pinmux_tristate_disable(PMUX_PINGRP_GMC); - pinmux_tristate_disable(PMUX_PINGRP_GMD); - } - break; - - case PERIPH_ID_NDFLASH: - switch (config) { - case FUNCMUX_NDFLASH_ATC: - pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_NAND); - pinmux_tristate_disable(PMUX_PINGRP_ATC); - break; - case FUNCMUX_NDFLASH_KBC_8_BIT: - pinmux_set_func(PMUX_PINGRP_KBCA, PMUX_FUNC_NAND); - pinmux_set_func(PMUX_PINGRP_KBCC, PMUX_FUNC_NAND); - pinmux_set_func(PMUX_PINGRP_KBCD, PMUX_FUNC_NAND); - pinmux_set_func(PMUX_PINGRP_KBCE, PMUX_FUNC_NAND); - pinmux_set_func(PMUX_PINGRP_KBCF, PMUX_FUNC_NAND); - - pinmux_tristate_disable(PMUX_PINGRP_KBCA); - pinmux_tristate_disable(PMUX_PINGRP_KBCC); - pinmux_tristate_disable(PMUX_PINGRP_KBCD); - pinmux_tristate_disable(PMUX_PINGRP_KBCE); - pinmux_tristate_disable(PMUX_PINGRP_KBCF); - - bad_config = 0; - break; - } - break; - case PERIPH_ID_DISP1: - if (config == FUNCMUX_DEFAULT) { - int i; - - for (i = PMUX_PINGRP_LD0; i <= PMUX_PINGRP_LD17; i++) { - pinmux_set_func(i, PMUX_FUNC_DISPA); - pinmux_tristate_disable(i); - pinmux_set_pullupdown(i, PMUX_PULL_NORMAL); - } - pinmux_config_pingrp_table(disp1_default, - ARRAY_SIZE(disp1_default)); - } - break; - - default: - debug("%s: invalid periph_id %d", __func__, id); - return -1; - } - - if (bad_config) { - debug("%s: invalid config %d for periph_id %d", __func__, - config, id); - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/tegra20-common/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c deleted file mode 100644 index e484f991bf..0000000000 --- a/arch/arm/cpu/tegra20-common/pinmux.c +++ /dev/null @@ -1,425 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Tegra20 pin multiplexing functions */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/pinmux.h> - -/* - * This defines the order of the pin mux control bits in the registers. For - * some reason there is no correspendence between the tristate, pin mux and - * pullup/pulldown registers. - */ -enum pmux_ctlid { - /* 0: APB_MISC_PP_PIN_MUX_CTL_A_0 */ - MUXCTL_UAA, - MUXCTL_UAB, - MUXCTL_UAC, - MUXCTL_UAD, - MUXCTL_UDA, - MUXCTL_RESERVED5, - MUXCTL_ATE, - MUXCTL_RM, - - MUXCTL_ATB, - MUXCTL_RESERVED9, - MUXCTL_ATD, - MUXCTL_ATC, - MUXCTL_ATA, - MUXCTL_KBCF, - MUXCTL_KBCE, - MUXCTL_SDMMC1, - - /* 16: APB_MISC_PP_PIN_MUX_CTL_B_0 */ - MUXCTL_GMA, - MUXCTL_GMC, - MUXCTL_HDINT, - MUXCTL_SLXA, - MUXCTL_OWC, - MUXCTL_SLXC, - MUXCTL_SLXD, - MUXCTL_SLXK, - - MUXCTL_UCA, - MUXCTL_UCB, - MUXCTL_DTA, - MUXCTL_DTB, - MUXCTL_RESERVED28, - MUXCTL_DTC, - MUXCTL_DTD, - MUXCTL_DTE, - - /* 32: APB_MISC_PP_PIN_MUX_CTL_C_0 */ - MUXCTL_DDC, - MUXCTL_CDEV1, - MUXCTL_CDEV2, - MUXCTL_CSUS, - MUXCTL_I2CP, - MUXCTL_KBCA, - MUXCTL_KBCB, - MUXCTL_KBCC, - - MUXCTL_IRTX, - MUXCTL_IRRX, - MUXCTL_DAP1, - MUXCTL_DAP2, - MUXCTL_DAP3, - MUXCTL_DAP4, - MUXCTL_GMB, - MUXCTL_GMD, - - /* 48: APB_MISC_PP_PIN_MUX_CTL_D_0 */ - MUXCTL_GME, - MUXCTL_GPV, - MUXCTL_GPU, - MUXCTL_SPDO, - MUXCTL_SPDI, - MUXCTL_SDB, - MUXCTL_SDC, - MUXCTL_SDD, - - MUXCTL_SPIH, - MUXCTL_SPIG, - MUXCTL_SPIF, - MUXCTL_SPIE, - MUXCTL_SPID, - MUXCTL_SPIC, - MUXCTL_SPIB, - MUXCTL_SPIA, - - /* 64: APB_MISC_PP_PIN_MUX_CTL_E_0 */ - MUXCTL_LPW0, - MUXCTL_LPW1, - MUXCTL_LPW2, - MUXCTL_LSDI, - MUXCTL_LSDA, - MUXCTL_LSPI, - MUXCTL_LCSN, - MUXCTL_LDC, - - MUXCTL_LSCK, - MUXCTL_LSC0, - MUXCTL_LSC1, - MUXCTL_LHS, - MUXCTL_LVS, - MUXCTL_LM0, - MUXCTL_LM1, - MUXCTL_LVP0, - - /* 80: APB_MISC_PP_PIN_MUX_CTL_F_0 */ - MUXCTL_LD0, - MUXCTL_LD1, - MUXCTL_LD2, - MUXCTL_LD3, - MUXCTL_LD4, - MUXCTL_LD5, - MUXCTL_LD6, - MUXCTL_LD7, - - MUXCTL_LD8, - MUXCTL_LD9, - MUXCTL_LD10, - MUXCTL_LD11, - MUXCTL_LD12, - MUXCTL_LD13, - MUXCTL_LD14, - MUXCTL_LD15, - - /* 96: APB_MISC_PP_PIN_MUX_CTL_G_0 */ - MUXCTL_LD16, - MUXCTL_LD17, - MUXCTL_LHP1, - MUXCTL_LHP2, - MUXCTL_LVP1, - MUXCTL_LHP0, - MUXCTL_RESERVED102, - MUXCTL_LPP, - - MUXCTL_LDI, - MUXCTL_PMC, - MUXCTL_CRTP, - MUXCTL_PTA, - MUXCTL_RESERVED108, - MUXCTL_KBCD, - MUXCTL_GPU7, - MUXCTL_DTF, - - MUXCTL_NONE = -1, -}; - -/* - * And this defines the order of the pullup/pulldown controls which are again - * in a different order - */ -enum pmux_pullid { - /* 0: APB_MISC_PP_PULLUPDOWN_REG_A_0 */ - PUCTL_ATA, - PUCTL_ATB, - PUCTL_ATC, - PUCTL_ATD, - PUCTL_ATE, - PUCTL_DAP1, - PUCTL_DAP2, - PUCTL_DAP3, - - PUCTL_DAP4, - PUCTL_DTA, - PUCTL_DTB, - PUCTL_DTC, - PUCTL_DTD, - PUCTL_DTE, - PUCTL_DTF, - PUCTL_GPV, - - /* 16: APB_MISC_PP_PULLUPDOWN_REG_B_0 */ - PUCTL_RM, - PUCTL_I2CP, - PUCTL_PTA, - PUCTL_GPU7, - PUCTL_KBCA, - PUCTL_KBCB, - PUCTL_KBCC, - PUCTL_KBCD, - - PUCTL_SPDI, - PUCTL_SPDO, - PUCTL_GPSLXAU, - PUCTL_CRTP, - PUCTL_SLXC, - PUCTL_SLXD, - PUCTL_SLXK, - - /* 32: APB_MISC_PP_PULLUPDOWN_REG_C_0 */ - PUCTL_CDEV1, - PUCTL_CDEV2, - PUCTL_SPIA, - PUCTL_SPIB, - PUCTL_SPIC, - PUCTL_SPID, - PUCTL_SPIE, - PUCTL_SPIF, - - PUCTL_SPIG, - PUCTL_SPIH, - PUCTL_IRTX, - PUCTL_IRRX, - PUCTL_GME, - PUCTL_RESERVED45, - PUCTL_XM2D, - PUCTL_XM2C, - - /* 48: APB_MISC_PP_PULLUPDOWN_REG_D_0 */ - PUCTL_UAA, - PUCTL_UAB, - PUCTL_UAC, - PUCTL_UAD, - PUCTL_UCA, - PUCTL_UCB, - PUCTL_LD17, - PUCTL_LD19_18, - - PUCTL_LD21_20, - PUCTL_LD23_22, - PUCTL_LS, - PUCTL_LC, - PUCTL_CSUS, - PUCTL_DDRC, - PUCTL_SDC, - PUCTL_SDD, - - /* 64: APB_MISC_PP_PULLUPDOWN_REG_E_0 */ - PUCTL_KBCF, - PUCTL_KBCE, - PUCTL_PMCA, - PUCTL_PMCB, - PUCTL_PMCC, - PUCTL_PMCD, - PUCTL_PMCE, - PUCTL_CK32, - - PUCTL_UDA, - PUCTL_SDMMC1, - PUCTL_GMA, - PUCTL_GMB, - PUCTL_GMC, - PUCTL_GMD, - PUCTL_DDC, - PUCTL_OWC, - - PUCTL_NONE = -1 -}; - -/* Convenient macro for defining pin group properties */ -#define PINALL(pingrp, f0, f1, f2, f3, mux, pupd) \ - { \ - .funcs = { \ - PMUX_FUNC_ ## f0, \ - PMUX_FUNC_ ## f1, \ - PMUX_FUNC_ ## f2, \ - PMUX_FUNC_ ## f3, \ - }, \ - .ctl_id = mux, \ - .pull_id = pupd \ - } - -/* A normal pin group where the mux name and pull-up name match */ -#define PIN(pingrp, f0, f1, f2, f3) \ - PINALL(pingrp, f0, f1, f2, f3, MUXCTL_##pingrp, PUCTL_##pingrp) - -/* A pin group where the pull-up name doesn't have a 1-1 mapping */ -#define PINP(pingrp, f0, f1, f2, f3, pupd) \ - PINALL(pingrp, f0, f1, f2, f3, MUXCTL_##pingrp, PUCTL_##pupd) - -/* A pin group number which is not used */ -#define PIN_RESERVED \ - PIN(NONE, RSVD1, RSVD2, RSVD3, RSVD4) - -#define DRVGRP(drvgrp) \ - PINALL(drvgrp, RSVD1, RSVD2, RSVD3, RSVD4, MUXCTL_NONE, PUCTL_NONE) - -static const struct pmux_pingrp_desc tegra20_pingroups[] = { - PIN(ATA, IDE, NAND, GMI, RSVD4), - PIN(ATB, IDE, NAND, GMI, SDIO4), - PIN(ATC, IDE, NAND, GMI, SDIO4), - PIN(ATD, IDE, NAND, GMI, SDIO4), - PIN(CDEV1, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC), - PIN(CDEV2, OSC, AHB_CLK, APB_CLK, PLLP_OUT4), - PIN(CSUS, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK), - PIN(DAP1, DAP1, RSVD2, GMI, SDIO2), - - PIN(DAP2, DAP2, TWC, RSVD3, GMI), - PIN(DAP3, DAP3, RSVD2, RSVD3, RSVD4), - PIN(DAP4, DAP4, RSVD2, GMI, RSVD4), - PIN(DTA, RSVD1, SDIO2, VI, RSVD4), - PIN(DTB, RSVD1, RSVD2, VI, SPI1), - PIN(DTC, RSVD1, RSVD2, VI, RSVD4), - PIN(DTD, RSVD1, SDIO2, VI, RSVD4), - PIN(DTE, RSVD1, RSVD2, VI, SPI1), - - PINP(GPU, PWM, UARTA, GMI, RSVD4, GPSLXAU), - PIN(GPV, PCIE, RSVD2, RSVD3, RSVD4), - PIN(I2CP, I2C, RSVD2, RSVD3, RSVD4), - PIN(IRTX, UARTA, UARTB, GMI, SPI4), - PIN(IRRX, UARTA, UARTB, GMI, SPI4), - PIN(KBCB, KBC, NAND, SDIO2, MIO), - PIN(KBCA, KBC, NAND, SDIO2, EMC_TEST0_DLL), - PINP(PMC, PWR_ON, PWR_INTR, RSVD3, RSVD4, NONE), - - PIN(PTA, I2C2, HDMI, GMI, RSVD4), - PIN(RM, I2C, RSVD2, RSVD3, RSVD4), - PIN(KBCE, KBC, NAND, OWR, RSVD4), - PIN(KBCF, KBC, NAND, TRACE, MIO), - PIN(GMA, UARTE, SPI3, GMI, SDIO4), - PIN(GMC, UARTD, SPI4, GMI, SFLASH), - PIN(SDMMC1, SDIO1, RSVD2, UARTE, UARTA), - PIN(OWC, OWR, RSVD2, RSVD3, RSVD4), - - PIN(GME, RSVD1, DAP5, GMI, SDIO4), - PIN(SDC, PWM, TWC, SDIO3, SPI3), - PIN(SDD, UARTA, PWM, SDIO3, SPI3), - PIN_RESERVED, - PINP(SLXA, PCIE, SPI4, SDIO3, SPI2, CRTP), - PIN(SLXC, SPDIF, SPI4, SDIO3, SPI2), - PIN(SLXD, SPDIF, SPI4, SDIO3, SPI2), - PIN(SLXK, PCIE, SPI4, SDIO3, SPI2), - - PIN(SPDI, SPDIF, RSVD2, I2C, SDIO2), - PIN(SPDO, SPDIF, RSVD2, I2C, SDIO2), - PIN(SPIA, SPI1, SPI2, SPI3, GMI), - PIN(SPIB, SPI1, SPI2, SPI3, GMI), - PIN(SPIC, SPI1, SPI2, SPI3, GMI), - PIN(SPID, SPI2, SPI1, SPI2_ALT, GMI), - PIN(SPIE, SPI2, SPI1, SPI2_ALT, GMI), - PIN(SPIF, SPI3, SPI1, SPI2, RSVD4), - - PIN(SPIG, SPI3, SPI2, SPI2_ALT, I2C), - PIN(SPIH, SPI3, SPI2, SPI2_ALT, I2C), - PIN(UAA, SPI3, MIPI_HS, UARTA, ULPI), - PIN(UAB, SPI2, MIPI_HS, UARTA, ULPI), - PIN(UAC, OWR, RSVD2, RSVD3, RSVD4), - PIN(UAD, UARTB, SPDIF, UARTA, SPI4), - PIN(UCA, UARTC, RSVD2, GMI, RSVD4), - PIN(UCB, UARTC, PWM, GMI, RSVD4), - - PIN_RESERVED, - PIN(ATE, IDE, NAND, GMI, RSVD4), - PIN(KBCC, KBC, NAND, TRACE, EMC_TEST1_DLL), - PIN_RESERVED, - PIN_RESERVED, - PIN(GMB, IDE, NAND, GMI, GMI_INT), - PIN(GMD, RSVD1, NAND, GMI, SFLASH), - PIN(DDC, I2C2, RSVD2, RSVD3, RSVD4), - - /* 64 */ - PINP(LD0, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD1, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD2, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD3, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD4, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD5, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD6, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD7, DISPA, DISPB, XIO, RSVD4, LD17), - - PINP(LD8, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD9, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD10, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD11, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD12, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD13, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD14, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD15, DISPA, DISPB, XIO, RSVD4, LD17), - - PINP(LD16, DISPA, DISPB, XIO, RSVD4, LD17), - PINP(LD17, DISPA, DISPB, RSVD3, RSVD4, LD17), - PINP(LHP0, DISPA, DISPB, RSVD3, RSVD4, LD21_20), - PINP(LHP1, DISPA, DISPB, RSVD3, RSVD4, LD19_18), - PINP(LHP2, DISPA, DISPB, RSVD3, RSVD4, LD19_18), - PINP(LVP0, DISPA, DISPB, RSVD3, RSVD4, LC), - PINP(LVP1, DISPA, DISPB, RSVD3, RSVD4, LD21_20), - PINP(HDINT, HDMI, RSVD2, RSVD3, RSVD4, LC), - - PINP(LM0, DISPA, DISPB, SPI3, RSVD4, LC), - PINP(LM1, DISPA, DISPB, RSVD3, CRT, LC), - PINP(LVS, DISPA, DISPB, XIO, RSVD4, LC), - PINP(LSC0, DISPA, DISPB, XIO, RSVD4, LC), - PINP(LSC1, DISPA, DISPB, SPI3, HDMI, LS), - PINP(LSCK, DISPA, DISPB, SPI3, HDMI, LS), - PINP(LDC, DISPA, DISPB, RSVD3, RSVD4, LS), - PINP(LCSN, DISPA, DISPB, SPI3, RSVD4, LS), - - /* 96 */ - PINP(LSPI, DISPA, DISPB, XIO, HDMI, LC), - PINP(LSDA, DISPA, DISPB, SPI3, HDMI, LS), - PINP(LSDI, DISPA, DISPB, SPI3, RSVD4, LS), - PINP(LPW0, DISPA, DISPB, SPI3, HDMI, LS), - PINP(LPW1, DISPA, DISPB, RSVD3, RSVD4, LS), - PINP(LPW2, DISPA, DISPB, SPI3, HDMI, LS), - PINP(LDI, DISPA, DISPB, RSVD3, RSVD4, LD23_22), - PINP(LHS, DISPA, DISPB, XIO, RSVD4, LC), - - PINP(LPP, DISPA, DISPB, RSVD3, RSVD4, LD23_22), - PIN_RESERVED, - PIN(KBCD, KBC, NAND, SDIO2, MIO), - PIN(GPU7, RTCK, RSVD2, RSVD3, RSVD4), - PIN(DTF, I2C3, RSVD2, VI, RSVD4), - PIN(UDA, SPI1, RSVD2, UARTD, ULPI), - PIN(CRTP, CRT, RSVD2, RSVD3, RSVD4), - PINP(SDB, UARTA, PWM, SDIO3, SPI2, NONE), - - /* these pin groups only have pullup and pull down control */ - DRVGRP(CK32), - DRVGRP(DDRC), - DRVGRP(PMCA), - DRVGRP(PMCB), - DRVGRP(PMCC), - DRVGRP(PMCD), - DRVGRP(PMCE), - DRVGRP(XM2C), - DRVGRP(XM2D), -}; -const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra20_pingroups; diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c deleted file mode 100644 index 36a76a24d9..0000000000 --- a/arch/arm/cpu/tegra20-common/pmu.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <tps6586x.h> -#include <asm/io.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/ap.h> -#include <asm/arch-tegra/tegra_i2c.h> -#include <asm/arch-tegra/sys_proto.h> - -#define VDD_CORE_NOMINAL_T25 0x17 /* 1.3v */ -#define VDD_CPU_NOMINAL_T25 0x10 /* 1.125v */ - -#define VDD_CORE_NOMINAL_T20 0x16 /* 1.275v */ -#define VDD_CPU_NOMINAL_T20 0x0f /* 1.1v */ - -#define VDD_RELATION 0x02 /* 50mv */ -#define VDD_TRANSITION_STEP 0x06 /* 150mv */ -#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */ - -#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */ - -int pmu_set_nominal(void) -{ - struct udevice *bus, *dev; - int core, cpu; - int ret; - - /* by default, the table has been filled with T25 settings */ - switch (tegra_get_chip_sku()) { - case TEGRA_SOC_T20: - core = VDD_CORE_NOMINAL_T20; - cpu = VDD_CPU_NOMINAL_T20; - break; - case TEGRA_SOC_T25: - core = VDD_CORE_NOMINAL_T25; - cpu = VDD_CPU_NOMINAL_T25; - break; - default: - debug("%s: Unknown SKU id\n", __func__); - return -1; - } - - ret = tegra_i2c_get_dvc_bus(&bus); - if (ret) { - debug("%s: Cannot find DVC I2C bus\n", __func__); - return ret; - } - ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev); - if (ret) { - debug("%s: Cannot find DVC I2C chip\n", __func__); - return ret; - } - - tps6586x_init(dev); - tps6586x_set_pwm_mode(TPS6586X_PWM_SM1); - return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP, - VDD_TRANSITION_RATE, VDD_RELATION); -} diff --git a/arch/arm/cpu/tegra20-common/warmboot.c b/arch/arm/cpu/tegra20-common/warmboot.c deleted file mode 100644 index 5fdc4bbb50..0000000000 --- a/arch/arm/cpu/tegra20-common/warmboot.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * (C) Copyright 2010 - 2011 - * NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/clock.h> -#include <asm/arch/emc.h> -#include <asm/arch/gp_padctrl.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/sdram_param.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/ap.h> -#include <asm/arch-tegra/apb_misc.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/fuse.h> -#include <asm/arch-tegra/warmboot.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_TEGRA_CLOCK_SCALING -#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA_LP0" -#endif - -/* - * This is the place in SRAM where the SDRAM parameters are stored. There - * are 4 blocks, one for each RAM code - */ -#define SDRAM_PARAMS_BASE (NV_PA_BASE_SRAM + 0x188) - -/* TODO: If we later add support for the Misc GP controller, refactor this */ -union xm2cfga_reg { - struct { - u32 reserved0:2; - u32 hsm_en:1; - u32 reserved1:2; - u32 preemp_en:1; - u32 vref_en:1; - u32 reserved2:5; - u32 cal_drvdn:5; - u32 reserved3:3; - u32 cal_drvup:5; - u32 reserved4:3; - u32 cal_drvdn_slwr:2; - u32 cal_drvup_slwf:2; - }; - u32 word; -}; - -union xm2cfgd_reg { - struct { - u32 reserved0:2; - u32 hsm_en:1; - u32 schmt_en:1; - u32 lpmd:2; - u32 vref_en:1; - u32 reserved1:5; - u32 cal_drvdn:5; - u32 reserved2:3; - u32 cal_drvup:5; - u32 reserved3:3; - u32 cal_drvdn_slwr:2; - u32 cal_drvup_slwf:2; - }; - u32 word; -}; - -/* - * TODO: This register is not documented in the TRM yet. We could move this - * into the EMC and give it a proper interface, but not while it is - * undocumented. - */ -union fbio_spare_reg { - struct { - u32 reserved:24; - u32 cfg_wb0:8; - }; - u32 word; -}; - -/* We pack the resume information into these unions for later */ -union scratch2_reg { - struct { - u32 pllm_base_divm:5; - u32 pllm_base_divn:10; - u32 pllm_base_divp:3; - u32 pllm_misc_lfcon:4; - u32 pllm_misc_cpcon:4; - u32 gp_xm2cfga_padctrl_preemp:1; - u32 gp_xm2cfgd_padctrl_schmt:1; - u32 osc_ctrl_xobp:1; - u32 memory_type:3; - }; - u32 word; -}; - -union scratch4_reg { - struct { - u32 emc_clock_divider:8; - u32 pllm_stable_time:8; - u32 pllx_stable_time:8; - u32 emc_fbio_spare_cfg_wb0:8; - }; - u32 word; -}; - -union scratch24_reg { - struct { - u32 emc_auto_cal_wait:8; - u32 emc_pin_program_wait:8; - u32 warmboot_wait:8; - u32 reserved:8; - }; - u32 word; -}; - -int warmboot_save_sdram_params(void) -{ - u32 ram_code; - struct sdram_params sdram; - struct apb_misc_pp_ctlr *apb_misc = - (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; - struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob); - union scratch2_reg scratch2; - union scratch4_reg scratch4; - union scratch24_reg scratch24; - union xm2cfga_reg xm2cfga; - union xm2cfgd_reg xm2cfgd; - union fbio_spare_reg fbio_spare; - - /* get ram code that is used as index to array sdram_params in BCT */ - ram_code = (readl(&apb_misc->strapping_opt_a) >> - STRAP_OPT_A_RAM_CODE_SHIFT) & 3; - memcpy(&sdram, - (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code), - sizeof(sdram)); - - xm2cfga.word = readl(&gp->xm2cfga); - xm2cfgd.word = readl(&gp->xm2cfgd); - - scratch2.word = 0; - scratch2.osc_ctrl_xobp = clock_get_osc_bypass(); - - /* Get the memory PLL settings */ - { - u32 divm, divn, divp, cpcon, lfcon; - - if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp, - &cpcon, &lfcon)) - return -1; - scratch2.pllm_base_divm = divm; - scratch2.pllm_base_divn = divn; - scratch2.pllm_base_divp = divp; - scratch2.pllm_misc_cpcon = cpcon; - scratch2.pllm_misc_lfcon = lfcon; - } - - scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en; - scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en; - scratch2.memory_type = sdram.memory_type; - writel(scratch2.word, &pmc->pmc_scratch2); - - /* collect data from various sources for pmc_scratch4 */ - fbio_spare.word = readl(&emc->fbio_spare); - scratch4.word = 0; - scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0; - scratch4.emc_clock_divider = sdram.emc_clock_divider; - scratch4.pllm_stable_time = -1; - scratch4.pllx_stable_time = -1; - writel(scratch4.word, &pmc->pmc_scratch4); - - /* collect various data from sdram for pmc_scratch24 */ - scratch24.word = 0; - scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait; - scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait; - scratch24.warmboot_wait = sdram.warm_boot_wait; - writel(scratch24.word, &pmc->pmc_scratch24); - - return 0; -} - -static u32 get_major_version(void) -{ - u32 major_id; - struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; - - major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >> - HIDREV_MAJORPREV_SHIFT; - return major_id; -} - -static int is_production_mode_fuse_set(struct fuse_regs *fuse) -{ - return readl(&fuse->production_mode); -} - -static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse) -{ - return readl(&fuse->security_mode); -} - -static int is_failure_analysis_mode(struct fuse_regs *fuse) -{ - return readl(&fuse->fa); -} - -static int ap20_is_odm_production_mode(void) -{ - struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE; - - if (!is_failure_analysis_mode(fuse) && - is_odm_production_mode_fuse_set(fuse)) - return 1; - else - return 0; -} - -static int ap20_is_production_mode(void) -{ - struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE; - - if (get_major_version() == 0) - return 1; - - if (!is_failure_analysis_mode(fuse) && - is_production_mode_fuse_set(fuse) && - !is_odm_production_mode_fuse_set(fuse)) - return 1; - else - return 0; -} - -static enum fuse_operating_mode fuse_get_operation_mode(void) -{ - u32 chip_id; - struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; - - chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> - HIDREV_CHIPID_SHIFT; - if (chip_id == CHIPID_TEGRA20) { - if (ap20_is_odm_production_mode()) { - printf("!! odm_production_mode is not supported !!\n"); - return MODE_UNDEFINED; - } else - if (ap20_is_production_mode()) - return MODE_PRODUCTION; - else - return MODE_UNDEFINED; - } - return MODE_UNDEFINED; -} - -static void determine_crypto_options(int *is_encrypted, int *is_signed, - int *use_zero_key) -{ - switch (fuse_get_operation_mode()) { - case MODE_PRODUCTION: - *is_encrypted = 0; - *is_signed = 1; - *use_zero_key = 1; - break; - case MODE_UNDEFINED: - default: - *is_encrypted = 0; - *is_signed = 0; - *use_zero_key = 0; - break; - } -} - -static int sign_wb_code(u32 start, u32 length, int use_zero_key) -{ - int err; - u8 *source; /* Pointer to source */ - u8 *hash; - - /* Calculate AES block parameters. */ - source = (u8 *)(start + offsetof(struct wb_header, random_aes_block)); - length -= offsetof(struct wb_header, random_aes_block); - hash = (u8 *)(start + offsetof(struct wb_header, hash)); - err = sign_data_block(source, length, hash); - - return err; -} - -int warmboot_prepare_code(u32 seg_address, u32 seg_length) -{ - int err = 0; - u32 length; /* length of the signed/encrypt code */ - struct wb_header *dst_header; /* Pointer to dest WB header */ - int is_encrypted; /* Segment is encrypted */ - int is_signed; /* Segment is signed */ - int use_zero_key; /* Use key of all zeros */ - - /* Determine crypto options. */ - determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key); - - /* Get the actual code limits. */ - length = roundup(((u32)wb_end - (u32)wb_start), 16); - - /* - * The region specified by seg_address must be in SDRAM and must be - * nonzero in length. - */ - if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE || - seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) { - err = -EFAULT; - goto fail; - } - - /* Things must be 16-byte aligned. */ - if ((seg_length & 0xF) || (seg_address & 0xF)) { - err = -EINVAL; - goto fail; - } - - /* Will the code fit? (destination includes wb_header + wb code) */ - if (seg_length < (length + sizeof(struct wb_header))) { - err = -EINVAL; - goto fail; - } - - dst_header = (struct wb_header *)seg_address; - memset((char *)dst_header, 0, sizeof(struct wb_header)); - - /* Populate the random_aes_block as requested. */ - { - u32 *aes_block = (u32 *)&(dst_header->random_aes_block); - u32 *end = (u32 *)(((u32)aes_block) + - sizeof(dst_header->random_aes_block)); - - do { - *aes_block++ = 0; - } while (aes_block < end); - } - - /* Populate the header. */ - dst_header->length_insecure = length + sizeof(struct wb_header); - dst_header->length_secure = length + sizeof(struct wb_header); - dst_header->destination = NV_WB_RUN_ADDRESS; - dst_header->entry_point = NV_WB_RUN_ADDRESS; - dst_header->code_length = length; - - if (is_encrypted) { - printf("!!!! Encryption is not supported !!!!\n"); - dst_header->length_insecure = 0; - err = -EACCES; - goto fail; - } else - /* copy the wb code directly following dst_header. */ - memcpy((char *)(dst_header+1), (char *)wb_start, length); - - if (is_signed) - err = sign_wb_code(seg_address, dst_header->length_insecure, - use_zero_key); - -fail: - if (err) - printf("Warning: warmboot code copy failed (error=%d)\n", err); - - return err; -} diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.c b/arch/arm/cpu/tegra20-common/warmboot_avp.c deleted file mode 100644 index 27ce5f480f..0000000000 --- a/arch/arm/cpu/tegra20-common/warmboot_avp.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2010 - 2011 - * NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/flow.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/ap.h> -#include <asm/arch-tegra/apb_misc.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/warmboot.h> -#include "warmboot_avp.h" - -#define DEBUG_RESET_CORESIGHT - -void wb_start(void) -{ - struct apb_misc_pp_ctlr *apb_misc = - (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - union osc_ctrl_reg osc_ctrl; - union pllx_base_reg pllx_base; - union pllx_misc_reg pllx_misc; - union scratch3_reg scratch3; - u32 reg; - - /* enable JTAG & TBE */ - writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &apb_misc->cfg_ctl); - - /* Are we running where we're supposed to be? */ - asm volatile ( - "adr %0, wb_start;" /* reg: wb_start address */ - : "=r"(reg) /* output */ - /* no input, no clobber list */ - ); - - if (reg != NV_WB_RUN_ADDRESS) - goto do_reset; - - /* Are we running with AVP? */ - if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP) - goto do_reset; - -#ifdef DEBUG_RESET_CORESIGHT - /* Assert CoreSight reset */ - reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); - reg |= SWR_CSITE_RST; - writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); -#endif - - /* TODO: Set the drive strength - maybe make this a board parameter? */ - osc_ctrl.word = readl(&clkrst->crc_osc_ctrl); - osc_ctrl.xofs = 4; - osc_ctrl.xoe = 1; - writel(osc_ctrl.word, &clkrst->crc_osc_ctrl); - - /* Power up the CPU complex if necessary */ - if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) { - reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START; - writel(reg, &pmc->pmc_pwrgate_toggle); - while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) - ; - } - - /* Remove the I/O clamps from the CPU power partition. */ - reg = readl(&pmc->pmc_remove_clamping); - reg |= CPU_CLMP; - writel(reg, &pmc->pmc_remove_clamping); - - reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP; - writel(reg, &flow->halt_cop_events); - - /* Assert CPU complex reset */ - reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); - reg |= CPU_RST; - writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); - - /* Hold both CPUs in reset */ - reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 | - CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1; - writel(reg, &clkrst->crc_cpu_cmplx_set); - - /* Halt CPU1 at the flow controller for uni-processor configurations */ - writel(EVENT_MODE_STOP, &flow->halt_cpu1_events); - - /* - * Set the CPU reset vector. SCRATCH41 contains the physical - * address of the CPU-side restoration code. - */ - reg = readl(&pmc->pmc_scratch41); - writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR); - - /* Select CPU complex clock source */ - writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol); - - /* Start the CPU0 clock and stop the CPU1 clock */ - reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN | - CPU_CMPLX_CPU1_CLK_STP_STOP; - writel(reg, &clkrst->crc_clk_cpu_cmplx); - - /* Enable the CPU complex clock */ - reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]); - reg |= CLK_ENB_CPU; - writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]); - - /* Make sure the resets were held for at least 2 microseconds */ - reg = readl(TIMER_USEC_CNTR); - while (readl(TIMER_USEC_CNTR) <= (reg + 2)) - ; - -#ifdef DEBUG_RESET_CORESIGHT - /* - * De-assert CoreSight reset. - * NOTE: We're leaving the CoreSight clock on the oscillator for - * now. It will be restored to its original clock source - * when the CPU-side restoration code runs. - */ - reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); - reg &= ~SWR_CSITE_RST; - writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); -#endif - - /* Unlock the CPU CoreSight interfaces */ - reg = 0xC5ACCE55; - writel(reg, CSITE_CPU_DBG0_LAR); - writel(reg, CSITE_CPU_DBG1_LAR); - - /* - * Sample the microsecond timestamp again. This is the time we must - * use when returning from LP0 for PLL stabilization delays. - */ - reg = readl(TIMER_USEC_CNTR); - writel(reg, &pmc->pmc_scratch1); - - pllx_base.word = 0; - pllx_misc.word = 0; - scratch3.word = readl(&pmc->pmc_scratch3); - - /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */ - reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1; - - /* - * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and - * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz. - * - * reg is used to calculate the pllx freq, which is used to determine if - * to set dccon or not. - */ - if (reg > 26) - reg = 19; - - /* PLLX_BASE.PLLX_DIVM */ - if (scratch3.pllx_base_divm == reg) - reg = 0; - else - reg = 1; - - /* PLLX_BASE.PLLX_DIVN */ - pllx_base.divn = scratch3.pllx_base_divn; - reg = scratch3.pllx_base_divn << reg; - - /* PLLX_BASE.PLLX_DIVP */ - pllx_base.divp = scratch3.pllx_base_divp; - reg = reg >> scratch3.pllx_base_divp; - - pllx_base.bypass = 1; - - /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */ - if (reg > 600) - pllx_misc.dccon = 1; - - /* PLLX_MISC_LFCON */ - pllx_misc.lfcon = scratch3.pllx_misc_lfcon; - - /* PLLX_MISC_CPCON */ - pllx_misc.cpcon = scratch3.pllx_misc_cpcon; - - writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc); - writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); - - pllx_base.enable = 1; - writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); - pllx_base.bypass = 0; - writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); - - writel(0, flow->halt_cpu_events); - - reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0; - writel(reg, &clkrst->crc_cpu_cmplx_clr); - - reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE | - PLLM_OUT1_RATIO_VAL_8; - writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out[0]); - - reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 | - SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 | - SCLK_SYS_STATE_IDLE; - writel(reg, &clkrst->crc_sclk_brst_pol); - - /* avp_resume: no return after the write */ - reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); - reg &= ~CPU_RST; - writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); - - /* avp_halt: */ -avp_halt: - reg = EVENT_MODE_STOP | EVENT_JTAG; - writel(reg, flow->halt_cop_events); - goto avp_halt; - -do_reset: - /* - * Execution comes here if something goes wrong. The chip is reset and - * a cold boot is performed. - */ - writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]); - goto do_reset; -} - -/* - * wb_end() is a dummy function, and must be directly following wb_start(), - * and is used to calculate the size of wb_start(). - */ -void wb_end(void) -{ -} diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.h b/arch/arm/cpu/tegra20-common/warmboot_avp.h deleted file mode 100644 index 7b86acb156..0000000000 --- a/arch/arm/cpu/tegra20-common/warmboot_avp.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * (C) Copyright 2010, 2011 - * NVIDIA Corporation <www.nvidia.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _WARMBOOT_AVP_H_ -#define _WARMBOOT_AVP_H_ - -#define TEGRA_DEV_L 0 -#define TEGRA_DEV_H 1 -#define TEGRA_DEV_U 2 - -#define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE) -#define SIMPLE_PLLE (CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE) - -#define TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0) -#define TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4) - -#define USEC_CFG_DIVISOR_MASK 0xffff - -#define CONFIG_CTL_TBE (1 << 7) -#define CONFIG_CTL_JTAG (1 << 6) - -#define CPU_RST (1 << 0) -#define CLK_ENB_CPU (1 << 0) -#define SWR_TRIG_SYS_RST (1 << 2) -#define SWR_CSITE_RST (1 << 9) - -#define PWRGATE_STATUS_CPU (1 << 0) -#define PWRGATE_TOGGLE_PARTID_CPU (0 << 0) -#define PWRGATE_TOGGLE_START (1 << 8) - -#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 (3 << 0) -#define CPU_CMPLX_CPU0_CLK_STP_STOP (1 << 8) -#define CPU_CMPLX_CPU0_CLK_STP_RUN (0 << 8) -#define CPU_CMPLX_CPU1_CLK_STP_STOP (1 << 9) -#define CPU_CMPLX_CPU1_CLK_STP_RUN (0 << 9) - -#define CPU_CMPLX_CPURESET0 (1 << 0) -#define CPU_CMPLX_CPURESET1 (1 << 1) -#define CPU_CMPLX_DERESET0 (1 << 4) -#define CPU_CMPLX_DERESET1 (1 << 5) -#define CPU_CMPLX_DBGRESET0 (1 << 12) -#define CPU_CMPLX_DBGRESET1 (1 << 13) - -#define PLLM_OUT1_RSTN_RESET_DISABLE (1 << 0) -#define PLLM_OUT1_CLKEN_ENABLE (1 << 1) -#define PLLM_OUT1_RATIO_VAL_8 (8 << 8) - -#define SCLK_SYS_STATE_IDLE (1 << 28) -#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 (7 << 12) -#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 (7 << 8) -#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1 (7 << 4) -#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 (7 << 0) - -#define EVENT_ZERO_VAL_20 (20 << 0) -#define EVENT_MSEC (1 << 24) -#define EVENT_JTAG (1 << 28) -#define EVENT_MODE_STOP (2 << 29) - -#define CCLK_PLLP_BURST_POLICY 0x20004444 - -#endif |
