summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/ixp
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/ixp')
-rw-r--r--arch/arm/cpu/ixp/config.mk5
-rw-r--r--arch/arm/cpu/ixp/cpu.c5
-rw-r--r--arch/arm/cpu/ixp/npe/Makefile1
-rw-r--r--arch/arm/cpu/ixp/npe/npe.c74
-rw-r--r--arch/arm/cpu/ixp/start.S59
-rw-r--r--arch/arm/cpu/ixp/timer.c124
-rw-r--r--arch/arm/cpu/ixp/u-boot.lds8
7 files changed, 120 insertions, 156 deletions
diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk
index deca3f4d55..5868cba38b 100644
--- a/arch/arm/cpu/ixp/config.mk
+++ b/arch/arm/cpu/ixp/config.mk
@@ -27,6 +27,11 @@ BIG_ENDIAN = y
PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float -mbig-endian
PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100
+
+# -fdata-sections triggers "section .bss overlaps section .rel.dyn" linker error
+PLATFORM_RELFLAGS += -ffunction-sections
+LDFLAGS_u-boot += --gc-sections
+
# =========================================================================
#
# Supply options according to compiler version
diff --git a/arch/arm/cpu/ixp/cpu.c b/arch/arm/cpu/ixp/cpu.c
index ce275e5f3c..942845d544 100644
--- a/arch/arm/cpu/ixp/cpu.c
+++ b/arch/arm/cpu/ixp/cpu.c
@@ -36,8 +36,6 @@
#include <asm/arch/ixp425.h>
#include <asm/system.h>
-ulong loops_per_jiffy;
-
static void cache_flush(void);
#if defined(CONFIG_DISPLAY_CPUINFO)
@@ -51,17 +49,14 @@ int print_cpuinfo (void)
puts("CPU: Intel IXP425 at ");
switch ((id & 0x000003f0) >> 4) {
case 0x1c:
- loops_per_jiffy = 887467;
speed = 533;
break;
case 0x1d:
- loops_per_jiffy = 666016;
speed = 400;
break;
case 0x1f:
- loops_per_jiffy = 442901;
speed = 266;
break;
}
diff --git a/arch/arm/cpu/ixp/npe/Makefile b/arch/arm/cpu/ixp/npe/Makefile
index c756a1da41..14ab3c7a71 100644
--- a/arch/arm/cpu/ixp/npe/Makefile
+++ b/arch/arm/cpu/ixp/npe/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libnpe.o
LOCAL_CFLAGS += -I$(TOPDIR)/arch/arm/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux
CFLAGS += $(LOCAL_CFLAGS)
+CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend
HOSTCFLAGS += $(LOCAL_CFLAGS)
COBJS-$(CONFIG_IXP4XX_NPE) := npe.o \
diff --git a/arch/arm/cpu/ixp/npe/npe.c b/arch/arm/cpu/ixp/npe/npe.c
index 857bcadc0b..f0e02bf7d9 100644
--- a/arch/arm/cpu/ixp/npe/npe.c
+++ b/arch/arm/cpu/ixp/npe/npe.c
@@ -359,36 +359,53 @@ static int npe_init(struct eth_device *dev, bd_t * bis)
debug("%s: 1\n", __FUNCTION__);
- miiphy_read (dev->name, p_npe->phy_no, MII_BMSR, &reg_short);
-
- /*
- * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
- */
- if ((reg_short & BMSR_ANEGCAPABLE) && !(reg_short & BMSR_ANEGCOMPLETE)) {
- puts ("Waiting for PHY auto negotiation to complete");
- i = 0;
- while (!(reg_short & BMSR_ANEGCOMPLETE)) {
- /*
- * Timeout reached ?
- */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts (" TIMEOUT !\n");
- break;
- }
+#ifdef CONFIG_MII_NPE0_FIXEDLINK
+ if (0 == p_npe->eth_id) {
+ speed = CONFIG_MII_NPE0_SPEED;
+ duplex = CONFIG_MII_NPE0_FULLDUPLEX ? FULL : HALF;
+ } else
+#endif
+#ifdef CONFIG_MII_NPE1_FIXEDLINK
+ if (1 == p_npe->eth_id) {
+ speed = CONFIG_MII_NPE1_SPEED;
+ duplex = CONFIG_MII_NPE1_FULLDUPLEX ? FULL : HALF;
+ } else
+#endif
+ {
+ miiphy_read(dev->name, p_npe->phy_no, MII_BMSR, &reg_short);
+
+ /*
+ * Wait if PHY is capable of autonegotiation and
+ * autonegotiation is not complete
+ */
+ if ((reg_short & BMSR_ANEGCAPABLE) &&
+ !(reg_short & BMSR_ANEGCOMPLETE)) {
+ puts("Waiting for PHY auto negotiation to complete");
+ i = 0;
+ while (!(reg_short & BMSR_ANEGCOMPLETE)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ break;
+ }
- if ((i++ % 1000) == 0) {
- putc ('.');
- miiphy_read (dev->name, p_npe->phy_no, MII_BMSR, &reg_short);
+ if ((i++ % 1000) == 0) {
+ putc('.');
+ miiphy_read(dev->name, p_npe->phy_no,
+ MII_BMSR, &reg_short);
+ }
+ udelay(1000); /* 1 ms */
}
- udelay (1000); /* 1 ms */
+ puts(" done\n");
+ /* another 500 ms (results in faster booting) */
+ udelay(500000);
}
- puts (" done\n");
- udelay (500000); /* another 500 ms (results in faster booting) */
+ speed = miiphy_speed(dev->name, p_npe->phy_no);
+ duplex = miiphy_duplex(dev->name, p_npe->phy_no);
}
- speed = miiphy_speed (dev->name, p_npe->phy_no);
- duplex = miiphy_duplex (dev->name, p_npe->phy_no);
-
if (p_npe->print_speed) {
p_npe->print_speed = 0;
printf ("ENET Speed is %d Mbps - %s duplex connection\n",
@@ -621,9 +638,12 @@ int npe_initialize(bd_t * bis)
if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X) {
switch (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) {
case IX_FEATURE_CTRL_SILICON_TYPE_B0:
+ default: /* newer than B0 */
/*
- * If it is B0 Silicon, we only enable port when its corresponding
- * Eth Coprocessor is available.
+ * If it is B0 or newer Silicon, we
+ * only enable port when its
+ * corresponding Eth Coprocessor is
+ * available.
*/
if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
IX_FEATURE_CTRL_COMPONENT_ENABLED)
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 561c1f4795..faa9a8ff99 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -65,7 +65,8 @@
.endm
.globl _start
-_start: b reset
+_start:
+ ldr pc, _reset
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
@@ -74,6 +75,7 @@ _start: b reset
ldr pc, _irq
ldr pc, _fiq
+_reset: .word reset
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
@@ -167,12 +169,6 @@ reset:
str r1, [r2]
/* make sure flash is visible at 0 */
-#if 0
- ldr r2, =IXP425_EXP_CFG0
- ldr r1, [r2]
- orr r1, r1, #0x80000000
- str r1, [r2]
-#endif
mov r1, #CONFIG_SYS_SDR_CONFIG
ldr r2, =IXP425_SDR_CONFIG
str r1, [r2]
@@ -216,19 +212,6 @@ reset:
str r1, [r4]
DELAY_FOR 0x4000, r0
- /* copy */
- mov r0, #0
- mov r4, r0
- add r2, r0, #CONFIG_SYS_MONITOR_LEN
- mov r1, #0x10000000
- mov r5, r1
-
- 30:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r0, r2
- bne 30b
-
/* invalidate I & D caches & BTB */
mcr p15, 0, r0, c7, c7, 0
CPWAIT r0
@@ -241,19 +224,12 @@ reset:
mcr p15, 0, r0, c7, c10, 4
CPWAIT r0
- /* move flash to 0x50000000 */
+ /* remove flash mirror at 0x00000000 */
ldr r2, =IXP425_EXP_CFG0
ldr r1, [r2]
bic r1, r1, #0x80000000
str r1, [r2]
- nop
- nop
- nop
- nop
- nop
- nop
-
/* invalidate I & Data TLB */
mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
@@ -269,7 +245,7 @@ reset:
orr r0,r0,#0x13
msr cpsr,r0
-/* Set stackpointer in internal RAM to call board_init_f */
+/* Set initial stackpointer in SDRAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
@@ -580,28 +556,3 @@ reset_endless:
b reset_endless
-#ifdef CONFIG_USE_IRQ
-
-.LC0: .word loops_per_jiffy
-
-/*
- * 0 <= r0 <= 2000
- */
-.globl __udelay
-__udelay:
- mov r2, #0x6800
- orr r2, r2, #0x00db
- mul r0, r2, r0
- ldr r2, .LC0
- ldr r2, [r2] @ max = 0x0fffffff
- mov r0, r0, lsr #11 @ max = 0x00003fff
- mov r2, r2, lsr #11 @ max = 0x0003ffff
- mul r0, r2, r0 @ max = 2^32-1
- movs r0, r0, lsr #6
-
-delay_loop:
- subs r0, r0, #1
- bne delay_loop
- mov pc, lr
-
-#endif /* CONFIG_USE_IRQ */
diff --git a/arch/arm/cpu/ixp/timer.c b/arch/arm/cpu/ixp/timer.c
index edf341ff9f..9f3ea42ece 100644
--- a/arch/arm/cpu/ixp/timer.c
+++ b/arch/arm/cpu/ixp/timer.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2010
+ * Michael Schwingen, michael@schwingen.org
+ *
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
@@ -31,105 +34,94 @@
#include <common.h>
#include <asm/arch/ixp425.h>
+#include <asm/io.h>
+#include <div64.h>
-#ifdef CONFIG_TIMER_IRQ
-
-#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / CONFIG_SYS_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CONFIG_SYS_HZ)
-#define LATCH ((CLOCK_TICK_RATE + CONFIG_SYS_HZ/2) / CONFIG_SYS_HZ) /* For divider */
+DECLARE_GLOBAL_DATA_PTR;
/*
- * When interrupts are enabled, use timer 2 for time/delay generation...
+ * The IXP42x time-stamp timer runs at 2*OSC_IN (66.666MHz when using a
+ * 33.333MHz crystal).
*/
-
-static volatile ulong timestamp;
-
-static void timer_isr(void *data)
+static inline unsigned long long tick_to_time(unsigned long long tick)
{
- unsigned int *pTime = (unsigned int *)data;
-
- (*pTime)++;
-
- /*
- * Reset IRQ source
- */
- *IXP425_OSST = IXP425_OSST_TIMER_2_PEND;
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, CONFIG_IXP425_TIMER_CLK);
+ return tick;
}
-ulong get_timer (ulong base)
+static inline unsigned long long time_to_tick(unsigned long long time)
{
- return timestamp - base;
+ time *= CONFIG_IXP425_TIMER_CLK;
+ do_div(time, CONFIG_SYS_HZ);
+ return time;
}
-void reset_timer (void)
+static inline unsigned long long us_to_tick(unsigned long long us)
{
- timestamp = 0;
+ us = us * CONFIG_IXP425_TIMER_CLK + 999999;
+ do_div(us, 1000000);
+ return us;
}
-int timer_init (void)
+unsigned long long get_ticks(void)
{
- /* install interrupt handler for timer */
- irq_install_handler(IXP425_TIMER_2_IRQ, timer_isr, (void *)&timestamp);
-
- /* setup the Timer counter value */
- *IXP425_OSRT2 = (LATCH & ~IXP425_OST_RELOAD_MASK) | IXP425_OST_ENABLE;
+ ulong now = readl(IXP425_OSTS_B);
+
+ if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) {
+ /* rollover of timestamp timer register */
+ gd->timestamp += (0xFFFFFFFF - gd->lastinc) + now + 1;
+ writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
+ } else {
+ /* move stamp forward with absolut diff ticks */
+ gd->timestamp += (now - gd->lastinc);
+ }
+ gd->lastinc = now;
+ return gd->timestamp;
+}
- /* enable timer irq */
- *IXP425_ICMR = (1 << IXP425_TIMER_2_IRQ);
- return 0;
-}
-#else
-ulong get_timer (ulong base)
+void reset_timer_masked(void)
{
- return get_timer_masked () - base;
+ /* capture current timestamp counter */
+ gd->lastinc = readl(IXP425_OSTS_B);
+ /* start "advancing" time stamp from 0 */
+ gd->timestamp = 0;
}
-void ixp425_udelay(unsigned long usec)
+void reset_timer(void)
{
- /*
- * This function has a max usec, but since it is called from udelay
- * we should not have to worry... be happy
- */
- unsigned long usecs = CONFIG_SYS_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
-
- *IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
- usecs |= IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;
- *IXP425_OSRT1 = usecs;
- while (!(*IXP425_OSST & IXP425_OSST_TIMER_1_PEND));
+ reset_timer_masked();
}
-void __udelay (unsigned long usec)
+ulong get_timer_masked(void)
{
- while (usec--) ixp425_udelay(1);
+ return tick_to_time(get_ticks());
}
-static ulong reload_constant = 0xfffffff0;
-
-void reset_timer_masked (void)
+ulong get_timer(ulong base)
{
- ulong reload = reload_constant | IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;
+ return get_timer_masked() - base;
+}
- *IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
- *IXP425_OSRT1 = reload;
+void set_timer(ulong t)
+{
+ gd->timestamp = time_to_tick(t);
}
-ulong get_timer_masked (void)
+/* delay x useconds AND preserve advance timestamp value */
+void __udelay(unsigned long usec)
{
- /*
- * Note that it is possible for this to wrap!
- * In this case we return max.
- */
- ulong current = *IXP425_OST1;
- if (*IXP425_OSST & IXP425_OSST_TIMER_1_PEND)
- {
- return reload_constant;
- }
- return (reload_constant - current);
+ unsigned long long tmp;
+
+ tmp = get_ticks() + us_to_tick(usec);
+
+ while (get_ticks() < tmp)
+ ;
}
int timer_init(void)
{
+ writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
return 0;
}
-#endif
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 3587f8aa6b..7199de4af1 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -31,8 +31,8 @@ SECTIONS
. = ALIGN(4);
.text :
{
- arch/arm/cpu/ixp/start.o(.text)
- *(.text)
+ arch/arm/cpu/ixp/start.o(.text*)
+ *(.text*)
}
. = ALIGN(4);
@@ -40,7 +40,7 @@ SECTIONS
. = ALIGN(4);
.data : {
- *(.data)
+ *(.data*)
}
. = ALIGN(4);
@@ -67,7 +67,7 @@ SECTIONS
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
- *(.bss)
+ *(.bss*)
. = ALIGN(4);
__bss_end__ = .;
}
OpenPOWER on IntegriCloud