diff options
Diffstat (limited to 'arch/arm/cpu/at91-common/mpddrc.c')
| -rw-r--r-- | arch/arm/cpu/at91-common/mpddrc.c | 133 |
1 files changed, 0 insertions, 133 deletions
diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c deleted file mode 100644 index 44798e612c..0000000000 --- a/arch/arm/cpu/at91-common/mpddrc.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) 2013 Atmel Corporation - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/atmel_mpddrc.h> - -static inline void atmel_mpddr_op(int mode, u32 ram_address) -{ - struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; - - writel(mode, &mpddr->mr); - writel(0, ram_address); -} - -static int ddr2_decodtype_is_seq(u32 cr) -{ -#if defined(CONFIG_SAMA5D3) - if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED) - return 0; -#endif - return 1; -} - -int ddr2_init(const unsigned int ram_address, - const struct atmel_mpddr *mpddr_value) -{ - struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC; - u32 ba_off, cr; - - /* Compute bank offset according to NC in configuration register */ - ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9; - if (ddr2_decodtype_is_seq(mpddr_value->cr)) - ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11; - - ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2; - - /* Program the memory device type into the memory device register */ - writel(mpddr_value->md, &mpddr->md); - - /* Program the configuration register */ - writel(mpddr_value->cr, &mpddr->cr); - - /* Program the timing register */ - writel(mpddr_value->tpr0, &mpddr->tpr0); - writel(mpddr_value->tpr1, &mpddr->tpr1); - writel(mpddr_value->tpr2, &mpddr->tpr2); - - /* Issue a NOP command */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address); - - /* A 200 us is provided to precede any signal toggle */ - udelay(200); - - /* Issue a NOP command */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address); - - /* Issue an all banks precharge command */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address); - - /* Issue an extended mode register set(EMRS2) to choose operation */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, - ram_address + (0x2 << ba_off)); - - /* Issue an extended mode register set(EMRS3) to set EMSR to 0 */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, - ram_address + (0x3 << ba_off)); - - /* - * Issue an extended mode register set(EMRS1) to enable DLL and - * program D.I.C (output driver impedance control) - */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, - ram_address + (0x1 << ba_off)); - - /* Enable DLL reset */ - cr = readl(&mpddr->cr); - writel(cr | ATMEL_MPDDRC_CR_DLL_RESET_ENABLED, &mpddr->cr); - - /* A mode register set(MRS) cycle is issued to reset DLL */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address); - - /* Issue an all banks precharge command */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_PRCGALL_CMD, ram_address); - - /* Two auto-refresh (CBR) cycles are provided */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address); - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_RFSH_CMD, ram_address); - - /* Disable DLL reset */ - cr = readl(&mpddr->cr); - writel(cr & (~ATMEL_MPDDRC_CR_DLL_RESET_ENABLED), &mpddr->cr); - - /* A mode register set (MRS) cycle is issued to disable DLL reset */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address); - - /* Set OCD calibration in default state */ - cr = readl(&mpddr->cr); - writel(cr | ATMEL_MPDDRC_CR_OCD_DEFAULT, &mpddr->cr); - - /* - * An extended mode register set (EMRS1) cycle is issued - * to OCD default value - */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, - ram_address + (0x1 << ba_off)); - - /* OCD calibration mode exit */ - cr = readl(&mpddr->cr); - writel(cr & (~ATMEL_MPDDRC_CR_OCD_DEFAULT), &mpddr->cr); - - /* - * An extended mode register set (EMRS1) cycle is issued - * to enable OCD exit - */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD, - ram_address + (0x1 << ba_off)); - - /* A nornal mode command is provided */ - atmel_mpddr_op(ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address); - - /* Perform a write access to any DDR2-SDRAM address */ - writel(0, ram_address); - - /* Write the refresh rate */ - writel(mpddr_value->rtr, &mpddr->rtr); - - return 0; -} |
