diff options
Diffstat (limited to 'arch/arm/cpu/armv7/u8500/cpu.c')
| -rw-r--r-- | arch/arm/cpu/armv7/u8500/cpu.c | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c deleted file mode 100644 index d8634bebbd..0000000000 --- a/arch/arm/cpu/armv7/u8500/cpu.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (C) 2012 Linaro Limited - * Mathieu Poirier <mathieu.poirier@linaro.org> - * - * Based on original code from Joakim Axelsson at ST-Ericsson - * (C) Copyright 2010 ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/prcmu.h> -#include <asm/arch/clock.h> -#include <asm/arch/hardware.h> - -#include <asm/arch/hardware.h> - -#define CPUID_DB8500V1 0x411fc091 -#define CPUID_DB8500V2 0x412fc091 -#define ASICID_DB8500V11 0x008500A1 - -#define CACHE_CONTR_BASE 0xA0412000 -/* Cache controller register offsets - * as found in ARM's technical reference manual - */ -#define CACHE_INVAL_BY_WAY (CACHE_CONTR_BASE + 0x77C) -#define CACHE_LOCKDOWN_BY_D (CACHE_CONTR_BASE + 0X900) -#define CACHE_LOCKDOWN_BY_I (CACHE_CONTR_BASE + 0X904) - -static unsigned int read_asicid(void); - -static inline unsigned int read_cpuid(void) -{ - unsigned int val; - - /* Main ID register (MIDR) */ - asm("mrc p15, 0, %0, c0, c0, 0" - : "=r" (val) - : - : "cc"); - - return val; -} - -static int cpu_is_u8500v11(void) -{ - return read_asicid() == ASICID_DB8500V11; -} - -static int cpu_is_u8500v2(void) -{ - return read_cpuid() == CPUID_DB8500V2; -} - -static unsigned int read_asicid(void) -{ - unsigned int *address; - - if (cpu_is_u8500v2()) - address = (void *) U8500_ASIC_ID_LOC_V2; - else - address = (void *) U8500_ASIC_ID_LOC_ED_V1; - - return readl(address); -} - -void cpu_cache_initialization(void) -{ - unsigned int value; - /* invalidate all cache entries */ - writel(0xFFFF, CACHE_INVAL_BY_WAY); - - /* ways are set to '0' when they are totally - * cleaned and invalidated - */ - do { - value = readl(CACHE_INVAL_BY_WAY); - } while (value & 0xFF); - - /* Invalidate register 9 D and I lockdown */ - writel(0xFF, CACHE_LOCKDOWN_BY_D); - writel(0xFF, CACHE_LOCKDOWN_BY_I); -} - -#ifdef CONFIG_ARCH_CPU_INIT -/* - * SOC specific cpu init - */ -int arch_cpu_init(void) -{ - db8500_prcmu_init(); - db8500_clocks_init(); - - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -#ifdef CONFIG_MMC - -int u8500_mmc_power_init(void) -{ - int ret; - int enable, voltage; - int ab8500_revision; - - if (!cpu_is_u8500v11() && !cpu_is_u8500v2()) - return 0; - - /* Get AB8500 revision */ - ret = ab8500_read(AB8500_MISC, AB8500_REV_REG); - if (ret < 0) - goto out; - - ab8500_revision = ret; - - /* - * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD - * card to work. This is done by enabling the regulators in the AB8500 - * via PRCMU I2C transactions. - * - * This code is derived from the handling of AB8500_LDO_VAUX3 in - * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. - * - * Turn off and delay is required to have it work across soft reboots. - */ - - /* Turn off (read-modify-write) */ - ret = ab8500_read(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG); - if (ret < 0) - goto out; - - enable = ret; - - /* Turn off */ - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG, - enable & ~LDO_VAUX3_ENABLE_MASK); - if (ret < 0) - goto out; - - udelay(10 * 1000); - - /* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */ - ret = ab8500_read(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_SEL_REG); - if (ret < 0) - goto out; - - voltage = ret; - - if (ab8500_revision < 0x20) { - voltage &= ~LDO_VAUX3_SEL_MASK; - voltage |= LDO_VAUX3_SEL_2V9; - } else { - voltage &= ~LDO_VAUX3_V2_SEL_MASK; - voltage |= LDO_VAUX3_V2_SEL_2V91; - } - - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_SEL_REG, voltage); - if (ret < 0) - goto out; - - /* Turn on the supply */ - enable &= ~LDO_VAUX3_ENABLE_MASK; - enable |= LDO_VAUX3_ENABLE_VAL; - - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG, enable); - -out: - return ret; -} -#endif /* CONFIG_MMC */ |
