summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/armv7/tegra20/usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7/tegra20/usb.c')
-rw-r--r--arch/arm/cpu/armv7/tegra20/usb.c460
1 files changed, 460 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
new file mode 100644
index 0000000000..178bb130c2
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -0,0 +1,460 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/usb.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+
+enum {
+ USB_PORTS_MAX = 4, /* Maximum ports we allow */
+};
+
+/* Parameters we need for USB */
+enum {
+ PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
+ PARAM_DIVM, /* PLL INPUT DIVIDER */
+ PARAM_DIVP, /* POST DIVIDER (2^N) */
+ PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */
+ PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */
+ PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */
+ PARAM_STABLE_COUNT, /* PLL-U STABLE count */
+ PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */
+ PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */
+ PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */
+ PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */
+
+ PARAM_COUNT
+};
+
+/* Possible port types (dual role mode) */
+enum dr_mode {
+ DR_MODE_NONE = 0,
+ DR_MODE_HOST, /* supports host operation */
+ DR_MODE_DEVICE, /* supports device operation */
+ DR_MODE_OTG, /* supports both */
+};
+
+/* Information about a USB port */
+struct fdt_usb {
+ struct usb_ctlr *reg; /* address of registers in physical memory */
+ unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
+ unsigned enabled:1; /* 1 to enable, 0 to disable */
+ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
+ enum dr_mode dr_mode; /* dual role mode */
+ enum periph_id periph_id;/* peripheral id */
+ struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
+};
+
+static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
+static unsigned port_count; /* Number of available ports */
+static int port_current; /* Current port (-1 = none) */
+
+/*
+ * This table has USB timing parameters for each Oscillator frequency we
+ * support. There are four sets of values:
+ *
+ * 1. PLLU configuration information (reference clock is osc/clk_m and
+ * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ----------------------------------------------------------------------
+ * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0)
+ * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a)
+ * Filter frequency (MHz) 1 4.8 6 2
+ * CPCON 1100b 0011b 1100b 1100b
+ * LFCON0 0 0 0 0
+ *
+ * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ---------------------------------------------------------------------------
+ * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04)
+ * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66)
+ * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09)
+ * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE)
+ *
+ * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
+ * SessEnd. Each of these signals have their own debouncer and for each of
+ * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
+ * BIAS_DEBOUNCE_B).
+ *
+ * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
+ * 0xffff -> No debouncing at all
+ * <n> ms = <n> *1000 / (1/19.2MHz) / 4
+ *
+ * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
+ * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0
+ *
+ * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
+ * values, so we can keep those to default.
+ *
+ * 4. The 20 microsecond delay after bias cell operation.
+ */
+static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
+ { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
+ { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
+ { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
+ { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+};
+
+/* UTMIP Idle Wait Delay */
+static const u8 utmip_idle_wait_delay = 17;
+
+/* UTMIP Elastic limit */
+static const u8 utmip_elastic_limit = 16;
+
+/* UTMIP High Speed Sync Start Delay */
+static const u8 utmip_hs_sync_start_delay = 9;
+
+/* Put the port into host mode (this only works for OTG ports) */
+static void set_host_mode(struct fdt_usb *config)
+{
+ if (config->dr_mode == DR_MODE_OTG) {
+ /* Check whether remote host from USB1 is driving VBus */
+ if (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)
+ return;
+
+ /*
+ * If not driving, we set the GPIO to enable VBUS. We assume
+ * that the pinmux is set up correctly for this.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ fdtdec_setup_gpio(&config->vbus_gpio);
+ gpio_direction_output(config->vbus_gpio.gpio, 1);
+ debug("set_host_mode: GPIO %d high\n",
+ config->vbus_gpio.gpio);
+ }
+ }
+}
+
+void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
+{
+ /* Reset the USB controller with 2us delay */
+ reset_periph(config->periph_id, 2);
+
+ /*
+ * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
+ * base address
+ */
+ if (config->has_legacy_mode)
+ setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
+
+ /* Put UTMIP1/3 in reset */
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Enable the UTMIP PHY */
+ if (config->utmi)
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
+
+ /*
+ * TODO: where do we take the USB1 out of reset? The old code would
+ * take USB3 out of reset, but not USB1. This code doesn't do either.
+ */
+}
+
+/* set up the USB controller with the parameters provided */
+static int init_usb_controller(struct fdt_usb *config,
+ struct usb_ctlr *usbctlr, const u32 timing[])
+{
+ u32 val;
+ int loop_count;
+
+ clock_enable(config->periph_id);
+
+ /* Reset the usb controller */
+ usbf_reset_controller(config, usbctlr);
+
+ /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
+ clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Follow the crystal clock disable by >100ns delay */
+ udelay(1);
+
+ /*
+ * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
+ * mux must be switched to actually use a_sess_vld threshold.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
+ VBUS_SENSE_CTL_MASK,
+ VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
+ }
+
+ /*
+ * PLL Delay CONFIGURATION settings. The following parameters control
+ * the bring up of the plls.
+ */
+ val = readl(&usbctlr->utmip_misc_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+ timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+ timing[PARAM_ACTIVE_DELAY_COUNT] <<
+ UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_misc_cfg1);
+
+ /* Set PLL enable delay count and crystal frequency count */
+ val = readl(&usbctlr->utmip_pll_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+ timing[PARAM_ENABLE_DELAY_COUNT] <<
+ UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+ timing[PARAM_XTAL_FREQ_COUNT] <<
+ UTMIP_XTAL_FREQ_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_pll_cfg1);
+
+ /* Setting the tracking length time */
+ clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+ UTMIP_BIAS_PDTRK_COUNT_MASK,
+ timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
+
+ /* Program debounce time for VBUS to become valid */
+ clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+ UTMIP_DEBOUNCE_CFG0_MASK,
+ timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+
+ setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
+
+ /* Disable battery charge enabling bit */
+ setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
+
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
+ setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
+
+ /*
+ * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
+ * Setting these fields, together with default values of the
+ * other fields, results in programming the registers below as
+ * follows:
+ * UTMIP_HSRX_CFG0 = 0x9168c000
+ * UTMIP_HSRX_CFG1 = 0x13
+ */
+
+ /* Set PLL enable delay count and Crystal frequency count */
+ val = readl(&usbctlr->utmip_hsrx_cfg0);
+ clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
+ utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
+ utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
+ writel(val, &usbctlr->utmip_hsrx_cfg0);
+
+ /* Configure the UTMIP_HS_SYNC_START_DLY */
+ clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
+ UTMIP_HS_SYNC_START_DLY_MASK,
+ utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
+
+ /* Preceed the crystal clock disable by >100ns delay. */
+ udelay(1);
+
+ /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
+ setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Finished the per-controller init. */
+
+ /* De-assert UTMIP_RESET to bring out of reset. */
+ clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Wait for the phy clock to become valid in 100 ms */
+ for (loop_count = 100000; loop_count != 0; loop_count--) {
+ if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
+ break;
+ udelay(1);
+ }
+ if (!loop_count)
+ return -1;
+
+ return 0;
+}
+
+static void power_up_port(struct usb_ctlr *usbctlr)
+{
+ /* Deassert power down state */
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
+ UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
+ UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
+}
+
+static void config_clock(const u32 timing[])
+{
+ clock_start_pll(CLOCK_ID_USB,
+ timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
+ timing[PARAM_CPCON], timing[PARAM_LFCON]);
+}
+
+/**
+ * Add a new USB port to the list of available ports.
+ *
+ * @param config USB port configuration
+ * @return 0 if ok, -1 if error (too many ports)
+ */
+static int add_port(struct fdt_usb *config, const u32 timing[])
+{
+ struct usb_ctlr *usbctlr = config->reg;
+
+ if (port_count == USB_PORTS_MAX) {
+ debug("tegrausb: Cannot register more than %d ports\n",
+ USB_PORTS_MAX);
+ return -1;
+ }
+ if (init_usb_controller(config, usbctlr, timing)) {
+ debug("tegrausb: Cannot init port\n");
+ return -1;
+ }
+ if (config->utmi) {
+ /* Disable ICUSB FS/LS transceiver */
+ clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
+
+ /* Select UTMI parallel interface */
+ clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+ PTS_UTMI << PTS_SHIFT);
+ clrbits_le32(&usbctlr->port_sc1, STS);
+ power_up_port(usbctlr);
+ }
+ port[port_count++] = *config;
+
+ return 0;
+}
+
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
+{
+ struct usb_ctlr *usbctlr;
+
+ if (portnum >= port_count)
+ return -1;
+ tegrausb_stop_port();
+ set_host_mode(&port[portnum]);
+
+ usbctlr = port[portnum].reg;
+ *hccr = (u32)&usbctlr->cap_length;
+ *hcor = (u32)&usbctlr->usb_cmd;
+ port_current = portnum;
+ return 0;
+}
+
+int tegrausb_stop_port(void)
+{
+ struct usb_ctlr *usbctlr;
+
+ if (port_current == -1)
+ return -1;
+
+ usbctlr = port[port_current].reg;
+
+ /* Stop controller */
+ writel(0, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ /* Initiate controller reset */
+ writel(2, &usbctlr->usb_cmd);
+ udelay(1000);
+ port_current = -1;
+ return 0;
+}
+
+int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
+ struct fdt_usb *config)
+{
+ const char *phy, *mode;
+
+ config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode) {
+ if (0 == strcmp(mode, "host"))
+ config->dr_mode = DR_MODE_HOST;
+ else if (0 == strcmp(mode, "peripheral"))
+ config->dr_mode = DR_MODE_DEVICE;
+ else if (0 == strcmp(mode, "otg"))
+ config->dr_mode = DR_MODE_OTG;
+ else {
+ debug("%s: Cannot decode dr_mode '%s'\n", __func__,
+ mode);
+ return -FDT_ERR_NOTFOUND;
+ }
+ } else {
+ config->dr_mode = DR_MODE_HOST;
+ }
+
+ phy = fdt_getprop(blob, node, "phy_type", NULL);
+ config->utmi = phy && 0 == strcmp("utmi", phy);
+ config->enabled = fdtdec_get_is_enabled(blob, node);
+ config->has_legacy_mode = fdtdec_get_bool(blob, node,
+ "nvidia,has-legacy-mode");
+ config->periph_id = clock_decode_periph_id(blob, node);
+ if (config->periph_id == PERIPH_ID_NONE) {
+ debug("%s: Missing/invalid peripheral ID\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+ fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
+ debug("enabled=%d, legacy_mode=%d, utmi=%d, periph_id=%d, vbus=%d, "
+ "dr_mode=%d\n", config->enabled, config->has_legacy_mode,
+ config->utmi, config->periph_id, config->vbus_gpio.gpio,
+ config->dr_mode);
+
+ return 0;
+}
+
+int board_usb_init(const void *blob)
+{
+ struct fdt_usb config;
+ unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
+ enum clock_osc_freq freq;
+ int node_list[USB_PORTS_MAX];
+ int node, count, i;
+
+ /* Set up the USB clocks correctly based on our oscillator frequency */
+ freq = clock_get_osc_freq();
+ config_clock(usb_pll[freq]);
+
+ /* count may return <0 on error */
+ count = fdtdec_find_aliases_for_id(blob, "usb",
+ COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
+ for (i = 0; i < count; i++) {
+ debug("USB %d: ", i);
+ node = node_list[i];
+ if (!node)
+ continue;
+ if (fdt_decode_usb(blob, node, osc_freq, &config)) {
+ debug("Cannot decode USB node %s\n",
+ fdt_get_name(blob, node, NULL));
+ return -1;
+ }
+
+ if (add_port(&config, usb_pll[freq]))
+ return -1;
+ set_host_mode(&config);
+ }
+ port_current = -1;
+
+ return 0;
+}
OpenPOWER on IntegriCloud