diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 209 |
1 files changed, 36 insertions, 173 deletions
@@ -1396,178 +1396,34 @@ csb637_config : unconfig mp2usb_config : unconfig @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 -######################################################################## -## ARM Integrator boards -## There are two variants /AP && /CP -## - many different core modules (CMs) can be used -## - some share characteristics -## Those without specific cpu support can still use U-Boot -## provided the ARM boot monitor (or similar) runs before U-Boot -## to set up the platform e.g. map writeable memory to 0x00000000 -## setup MMU, setup caches etc. -## Ported cores are:- -## ARM926EJ-S -## ARM946E-S -## -######################################################################## -xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2)) -xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2)) -######################################################################### -## Integrator/AP -######################################################################### -integratorap_config : unconfig - @echo -n "/* Integrator configuration implied " > tmp.fil; \ - echo " by Makefile target */" >> tmp.fil; \ - echo >> tmp.fil - @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ - echo " /* Integrator board */" >> tmp.fil; \ - echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ - echo " 1 /* Integrator/AP */" >> tmp.fil; \ - echo "/* Core module not defined */" >> tmp.fil; \ - echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ - echo -n " /* Integrator core module " >> tmp.fil; \ - echo "with unknown core */" >> tmp.fil; \ - cpu=arm_intcm; \ - mv tmp.fil ./include/config.h; \ - ubootlds=board/integratorap/u-boot.lds; \ - sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ - $$ubootlds > $$ubootlds.tmp; \ - mv -f $$ubootlds.tmp $$ubootlds; \ - ./mkconfig -a integratorap arm arm_intcm integratorap; - -integratorap_CM720T_config integratorap_CM7TDMI_config \ -integratorap_CM920T_config integratorap_CM920T_ETM_config \ -integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \ -integratorap_CM940T_config integratorap_CM946E_S_config \ -integratorap_CM966E_S_config integratorap_CM10200E_config \ -integratorap_CM10220E_config integratorap_CM1026EJ_S_config \ -integratorap_CM1136JF_S_config : unconfig - @echo -n "/* Integrator configuration implied " > tmp.fil; \ - echo " by Makefile target */" >> tmp.fil; \ - echo >> tmp.fil - @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ - echo " /* Integrator board */" >> tmp.fil; \ - echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ - echo " 1 /* Integrator/AP */" >> tmp.fil; \ - cm=$(call xtract_int_cm,ap,$@); \ - echo -n "#define CONFIG_$$cm " >> tmp.fil; \ - echo " /* core module */" >> tmp.fil; \ - case $$cm in \ - CM920T) \ - echo -n "#define CONFIG_ARM920" >> tmp.fil; \ - echo -n "T 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM920T" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm920t;; \ - CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ - echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM926EJ-S" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm926ejs;; \ - CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ - echo -n "E_S 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM946E-S" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm946es;; \ - *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ - echo -n "TCM 1 /* Int" >> tmp.fil; \ - echo -n "egrator core module w" >> tmp.fil; \ - echo -n "ith unported core" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm_intcm;; \ - esac; \ - mv tmp.fil ./include/config.h; \ - ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \ - sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ - $$ubootlds > $$ubootlds.tmp; \ - mv -f $$ubootlds.tmp $$ubootlds; \ - ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \ - $(call xtract_int_board,ap,$@); -######################################################################### -## Integrator/CP -######################################################################### -integratorcp_config : unconfig - @echo -n "/* Integrator configuration implied " > tmp.fil; \ - echo " by Makefile target */" >> tmp.fil; \ - echo >> tmp.fil - @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ - echo " /* Integrator board */" >> tmp.fil; \ - echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ - echo " 1 /* Integrator/CP */" >> tmp.fil; \ - echo "/* Core module not defined */" >> tmp.fil; \ - echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ - echo -n " /* Integrator core module " >> tmp.fil; \ - echo "with unknown core */" >> tmp.fil; \ - cpu=arm_intcm; \ - echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \ - echo -n " /* CM may not have " >> tmp.fil; \ - echo "multiple SSRAM mapping */" >> tmp.fil; \ - echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \ - echo -n " /* CM may not support SPD " >> tmp.fil; \ - echo "query */" >> tmp.fil; \ - echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \ - echo -n " /* CM may not support " >> tmp.fil; \ - echo "remapping */" >> tmp.fil; \ - echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \ - echo -n " /* CM may not have " >> tmp.fil; \ - echo "initialization reg */" >> tmp.fil; \ - echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \ - echo -n " /* CM may not have TCRAM */" >> tmp.fil; \ - mv tmp.fil ./include/config.h; \ - ubootlds=board/integratorcp/u-boot.lds; \ - sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ - $$ubootlds > $$ubootlds.tmp; \ - mv -f $$ubootlds.tmp $$ubootlds; \ - ./mkconfig -a integratorcp arm arm_intcm integratorcp; - -integratorcp_CM920T_config integratorcp_CM920T_ETM_config \ -integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \ -integratorcp_CM940T_config integratorcp_CM946E_S_config \ -integratorcp_CM966E_S_config integratorcp_CM10200E_config \ -integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \ -integratorcp_CM1136JF_S_config : unconfig - @echo -n "/* Integrator configuration implied " > tmp.fil; \ - echo " by Makefile target */" >> tmp.fil; \ - echo >> tmp.fil - @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ - echo " /* Integrator board */" >> tmp.fil; \ - echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ - echo " 1 /* Integrator/CP */" >> tmp.fil; \ - cm=$(call xtract_int_cm,cp,$@); \ - echo -n "#define CONFIG_$$cm " >> tmp.fil; \ - echo " /* core module */" >> tmp.fil; \ - echo "/* $$cm core module */" >> tmp.fil; \ - case $$cm in \ - CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \ - echo -n "T 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM920T" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm920t;; \ - CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ - echo -n "E_S 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM946E-S" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm946es;; \ - CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ - echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ - echo -n " core is ARM926EJ-S" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm926ejs;; \ - *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ - echo -n "TCM 1 /* Int" >> tmp.fil; \ - echo -n "egrator core module w" >> tmp.fil; \ - echo -n "ith unported core" >> tmp.fil; \ - echo " */" >> tmp.fil; \ - cpu=arm_intcm;; \ - esac; \ - mv tmp.fil ./include/config.h; \ - ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \ - sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ - $$ubootlds > $$ubootlds.tmp; \ - mv -f $$ubootlds.tmp $$ubootlds; \ - ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \ - $(call xtract_int_board,cp,$@); +######################################################################## +## ARM Integrator boards - see doc/README-integrator for more info. +integratorap_config \ +ap_config \ +ap966_config \ +ap922_config \ +ap922_XA10_config \ +ap7_config \ +ap720t_config \ +ap920t_config \ +ap926ejs_config \ +ap946es_config: unconfig + @chmod a+x board/integratorap/split_by_variant.sh + @board/integratorap/split_by_variant.sh $@ $(CC) + +integratorcp_config \ +cp_config \ +cp920t_config \ +cp926ejs_config \ +cp946es_config \ +cp1136_config \ +cp966_config \ +cp922_config \ +cp922_XA10_config \ +cp1026_config: unconfig + @chmod a+x board/integratorcp/split_by_variant.sh + @board/integratorcp/split_by_variant.sh $@ $(CC) kb9202_config : unconfig @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 @@ -1660,8 +1516,14 @@ trab_old_config: unconfig VCMA9_config : unconfig @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 -versatile_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs versatile +#======================================================================== +# ARM supplied Versatile development boards +#======================================================================== +versatile_config \ +versatileab_config \ +versatilepb_config : unconfig + @chmod a+x board/versatile/split_by_variant.sh + @board/versatile/split_by_variant.sh $@ $(CC) voiceblue_smallflash_config \ voiceblue_config: unconfig @@ -1946,6 +1808,7 @@ clean: rm -f tools/env/fw_printenv tools/env/fw_setenv rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image rm -f board/trab/trab_fkt board/voiceblue/eeprom + rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds clobber: clean find . -type f \( -name .depend \ |
